Not able to connect to E-recruitment  Screen with EXternal Candidate URL

HI., when i generate the External candidate URL., by making use of the same i am not able to connect to the portal Screen of E-recruitment.. (I am able to connect with other roles like Recruiter and Employee)
How else can i connect to the Screen to fill the application details in E-recruitment.
Regards
Madhu. K

Hi,
please make sure that your user is really an external candidate. The logon for external candidates works with the ALIAS instead of the username. Ss if you want to logon with your user as an external candidate you have to enter the username in the field ALIAS within SU01.
Cheers
Matthias

Similar Messages

  • AE only shows 5Ghz even though it says dual band.  so i am not able to connect devices which only works with 2.4 ghzs

    Hi Can you please help me to resolve the issue of my Airport Extreme only showing 5Ghzs and not dual band. i am not able to connect any of my 2.4 ghzs devices.

    Hi Can you please help me to resolve the issue of my Airport Extreme only showing 5Ghzs and not dual band. i am not able to connect any of my 2.4 ghzs devices.

  • Not able to connect Azure Linux Virtual Machine with Putty

    Hi,
    I am not bale to connect Azure Linux Virtual Machine with Putty... Error shows "Network error: connection timed out".
    Please help.
    Thanks,
    Techsol
    Thanks, Kk

    Hi TechSol01,
    Thanks for posting here.
    I suggest you to try the below steps
    On a computer running a Windows operating system, you might want to use an SSH client such as PuTTY. For more information, see the
    PuTTY Download Page.
    On a computer running a Linux operating system, you might want to use an SSH client such as OpenSSH. For more information, see
    OpenSSH.
    If it is the endpoint configuration, you can go to the portal and add port 22, (it should already be there by default). 
    Now if it is locked out of the VM because of the firewall on the VM, which is called iptables , You won't be able to connect to the VM,
    If you haven’t configured the port 22. You may have to follow the below steps :
    A = Original VM (Inaccessible VM)
    B = New VM (New Temp VM)
    1)  Stop VM  A via the Azure management portal
    2) Delete VM A BUT select “keep the attached disks”
    3) Once the lease is cleared, attach the Data Disk from A to VM B via the Azure Portal, Virtual Machines, Select “B”, Attach Disk
    4) On VM “B” eventually the disk will attach and you can then mount it.
    5) Locate the drive name to mount, on VM “B” look in relevant log file note each linux is slightly different.
    grep SCSI /var/log/kern.log (ubuntu)
    grep SCSI /var/log/messages (centos, suse, oracle)
    6) Mount the attached disk onto mountpoint /tempmount
    df -h
    mkdir /tempmount
    mount /dev/sdc1 /tempmount
    df –h
    7) Now you should be able to clear the rules set from the configuration file of the firewall, by accessing it
    through /tempmount
    Let me know if this works
    Girish Prajwal

  • I am not able to connect my Mac book pro with iPhone 6  using bluetooth

    Specification of my Macbook Pro :
    Model Name:                         MacBook Pro
      Model Identifier:                   MacBookPro11,1
      Processor Name:                Intel Core i5
      Processor Speed:               2.4 GHz
      Number of Processors:       1
      Total Number of Cores:       2
      L2 Cache (per Core):           256 KB
      L3 Cache:                            3 MB
      Memory:                              8 GB
      Boot ROM Version:             MBP111.0138.B11
      SMC Version (system):       2.16f68
      Serial Number (system):     C02M4ZD0FH00
      Hardware UUID:                  1D25A9C3-C1ED-550F-8743-FF6DEAD9A59D
    OS : Yosemite 10.10.1
    I am trying to Handoff between my Macbook pro with IPhone 6+, however it is not happening. Even the Bluetooth connectivity is not
    happening between the devices.

    Try going to System Preferences/Bluetooth and then turn it off, wait a few seconds, then turn it on.
    Bluetooth Quick Assist

  • Not able to connect N82 to pc in data transfer mod...

    I am not able to connect N82 in data transfer mode( other modes are working fine) though i installed latest connectivity cable driver for N82. It says that it could not find any suitable driver(after search cd provided and online).
    My current firmware version of N82(RM-313) is 10.0.046. Operating system is Windows Vista. Will the firmware update fix the problem or I have to contact customer care center?
    Thank you for your support.
    mlhpr
    Solved!
    Go to Solution.

    22-Mar-2008 02:51 PM
    scoobyman wrote:
    Hi mlhpr
    If phone is set to 'data transfer" mode on user interface and USB plugged into PC N82 behaves as a Windows USB mass storage device and you are saying that Windows Vista can't recognize this?
    Ya thats is what the problem is. As you said the phone was to behave like USB pendrive in data transfer mode but i am getting this error.
    :I first connected the N82 with cable Nokia CA-101 provided with handset and selected the data transfer mode. Then the windows(Vista) icon would appear in task bar showing windows is installing the driver. Then a window pops up saying driver not found and requests permission to search online for driver. When I choose search online for suitable driver, it searches for a while and says no driver found. (net is working prefectly fine). The icon disappears from the bar and phone is inaccessible from windows explorer. But USB indicator on mobile screen is active until i disconnect using mobile connectivity settings.
    Actually i wanted this mode for installing the Nokia Maps which requires the phone to be in data transfer mode.
    mlhpr

  • Crystal reports 2013 , SAP MDX Driver not able to connect with BW BEX Query

    Hi All,
    We just installed Crystal 2013, and want to create crystal report on SAP BW CUBE/BEX Query through SAP MDX Driver.
    1.When start connecting through SAP MDX Query option from new connection , SAP Systems which are in SAPLOGON are not appearing in initial screen. where as from OLAP Connection we are able to connect to SAP BEX Query.
    2.Even from SAP Tool kit we are not able to connect to BEX query, we are getting ERROR MESSAGE.
    and we are using SAP BI BO PLATFORM 4.1 sp01 .
    Please suggest me , if I am missing any configuration settings.
    Regards,
    Joseph

    Hi Joseph,
    Before you start building the report, make sure the right transports have been loaded on the SAP System. The right Transport files are the ones found inside the installation zip you download from SAP's server. They're under the "Collaterals\Add-Ons\SAP\Transports" folder.
    For more info on Transports, authorizations etc, please have your BASIS admin go through this wiki:
    Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
    To resolve your first issue, please follow the steps from this thread:
    Problems with SAPLogon.ini for SAP GUI and Crystal 2011
    P.S: Crystal Reports for Enterprise 4.1 does a better job at handling BEx queries that the CR 2013 designer. It directly connects to BEx queries via the BICS connectivity driver and doesn't need the Transports to be there on the SAP System. You might want to give this flavour of CR a try too.
    -Abhilash

  • Hello friends..i m not able to connect MS SQL SERVER 2005 FROM cmd prompt

    dear friends,
    i m not able to connect MS SQL SERVER from command prompt..
    do you know how to connect from command prompt or any other ways to connect to database only for delete SAP* user purpose.
    thanks
    zaheer

    Hi,
    you can use the SQLCMD tool:
    Microsoft (R) SQL Server Command Line Tool
    Version 10.50.1600.1 NT x64
    Copyright (c) Microsoft Corporation.  All rights reserved.
    usage: Sqlcmd            [-U login id]          [-P password]
      [-S server]            [-H hostname]          [-E trusted connection]
      [-N Encrypt Connection][-C Trust Server Certificate]
      [-d use database name] [-l login timeout]     [-t query timeout]
      [-h headers]           [-s colseparator]      [-w screen width]
      [-a packetsize]        [-e echo input]        [-I Enable Quoted Identifiers]
      [-c cmdend]            [-L[c] list servers[clean output]]
      [-q "cmdline query"]   [-Q "cmdline query" and exit]
      [-m errorlevel]        [-V severitylevel]     [-W remove trailing spaces]
      [-u unicode output]    [-r[0|1] msgs to stderr]
      [-i inputfile]         [-o outputfile]        [-z new password]
      [-f <codepage> | i:<codepage>[,o:<codepage>]] [-Z new password and exit]
      [-k[1|2] remove[replace] control characters]
      [-y variable length type display width]
      [-Y fixed length type display width]
      [-p[1] print statistics[colon format]]
      [-R use client regional setting]
      [-b On error batch abort]
      [-v var = "value"...]  [-A dedicated admin connection]
      [-X[1] disable commands, startup script, enviroment variables [and exit]]
      [-x disable variable substitution]
      [-? show syntax summary]
    You have to have the SQL Server tools installed on the box, to get sqlcmd.
    You then can connect with SQL authentication
    sqlcmd -S <Servername\Instancename> -U user -P password                          
    or with windows authentication
    sqlcmd -S <Servername\Instancename> -E
    Best regards
      Clas

  • Not able to connect Iphone 4s to MacBook Air. iTunes gives an error  message and there is a constant aural

    Hi,
    I am not able to connect my iPhone 4s to my Macbook Air. There is constant audio alert and the iTunes error message says" ITunes could not connect to this phone. The device is no longer connected. I have been connecting with our any problem to my Windows Laptop (Win7) but get this error message on the recently purchased MacBook Air.
    Request a solution. Best wishes,
    Ashokcee

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Remote User not able to Connect Completely

    Hi,
    not able to connect a remote user to our network. All other remote users are able to connect so I know the tunnel is up. When this user tries to connect using the cisco vpn client, I see their traffic coming through with the sh crytpo ipsec sa peer peer address. I can see their peer address and I can see their dhcp local allocated address - allocated from the firewall, and I can ping their peer address but I can't ping the dhcp allocated address.
    Any ideas?
    Thanks, Pat.

    Email from user stating screen message:
    tried to sign in again - VPN Client connects fine, but Fusion states "not connected to the network", even though VPN connected
    Crypto map tag: OUTSIDE_dyn_map, seq num: 40, local addr: XX.XX.XX.XX
          local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
          remote ident (addr/mask/prot/port): (10.10.XX.XX/255.255.255.255/0/0)
          current_peer: 74.47.XX.XX, username: XXXXXXX
          dynamic allocated peer ip: 10.10.XX.XX
          #pkts encaps: 548, #pkts encrypt: 548, #pkts digest: 548
          #pkts decaps: 624, #pkts decrypt: 624, #pkts verify: 624
          #pkts compressed: 0, #pkts decompressed: 0
          #pkts not compressed: 548, #pkts comp failed: 0, #pkts decomp failed: 0
          #pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
          #PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
          #pkts no sa (send): 0, #pkts invalid sa (rcv): 0
          #pkts encaps failed (send): 0, #pkts decaps failed (rcv): 0
          #pkts invalid prot (rcv): 0, #pkts verify failed: 0
          #pkts invalid identity (rcv): 0, #pkts invalid len (rcv): 0
          #pkts invalid pad (rcv): 0,
          #pkts invalid ip version (rcv): 0,
          #pkts replay rollover (send): 0, #pkts replay rollover (rcv): 0
          #pkts replay failed (rcv): 0
          #pkts min mtu frag failed (send): 0, #pkts bad frag offset (rcv): 0
          #pkts internal err (send): 0, #pkts internal err (rcv): 0
          local crypto endpt.: XX.XX.XX.XX, remote crypto endpt.: 74.47.XX.XX
          path mtu 1500, ipsec overhead 58, media mtu 1500
          current outbound spi: F9F18F20
          current inbound spi : B27E9C25
        inbound esp sas:
          spi: 0xB27E9C25 (2994641957)
             transform: esp-3des esp-sha-hmac no compression
             in use settings ={RA, Tunnel, }
             slot: 0, conn_id: 166191104, crypto-map: OUTSIDE_dyn_map
             sa timing: remaining key lifetime (sec): 2902
             IV size: 8 bytes
             replay detection support: Y
             Anti replay bitmap:
              0x1FFFFFFF 0xFFFFFFFD
        outbound esp sas:
          spi: 0xF9F18F20 (4193357600)
             transform: esp-3des esp-sha-hmac no compression
             in use settings ={RA, Tunnel, }
             slot: 0, conn_id: 166191104, crypto-map: OUTSIDE_dyn_map
             sa timing: remaining key lifetime (sec): 2902
             IV size: 8 bytes
             replay detection support: Y
             Anti replay bitmap:
              0x00000000 0x00000001
    Thanks, Pat.

  • HT1695 My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It used to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

    My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It use to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • 10g Enterprise Manager is not able to connect to the database instance

    I am running a Oracle 10g database in Solaris 10 server. When i am trying to connect to the enterprise manager it says Enterprise Manager is not able to connect to the database instance.
    The database instance is open,the listener is up and the agent connection also says that it succeeded.
    The server houses two 10g databases and the EM was working properly till yesterday. Kindly Help.
    Thanks in advance.
    Ram

    Hi,
    The EM is started and if i give emctl status dbconsole
    -bash-3.00$ emctl status dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    http://gladiator:1158/em/console/aboutApplication
    Oracle Enterprise Manager 10g is running
    Logs are generated in directory /db8/ora10gr2/product/10.2.0/Db_4/gladiator_TROY/sysman/log
    it says that the EM is running. But when i am trying to access the URL it is in IE it says Page cannot be displayed what could be the problem for this???
    Thanks in advance.
    Ram

  • Reporting Services not able to connect with sharepoint

    HI
    We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
    When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion  that not able to connect to the reporting services.
    Request you to throw some light on the same.
    Thanks
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

    Hi Geeth,
    Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
    are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
    your SQL Server and SharePoint? It is benefit for us to do further analysis.
    References:
    2008 R2:
    http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
    http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
    http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
    2012:
    http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
    http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Not able to connect CRM Online to PowerBI

    Not able to connect CRM Online to PowerBI, Please let me know if you have an idea to resolve this issue.
    oops, something went wrong
    Failed to update model parameters
    Activity Id59a2a854-8e34-6636-0679-3d2e245d2241
    Request Id9b7fa606-324e-4ec8-495f-13f91d03bc54
    Error Code400
    TimeWed Mar 18 2015 21:24:18 GMT-0400 (Eastern Daylight Time)
    Version11.0.9165.945
    Cluster URIhttps://wabi-south-east-asia-redirect.analysis.windows.net

    Hi Kiran
    Please chcek the Note 1359600-MDM stopped communicating after upgrading to 7.1.03 from SAP NOTES.
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1359600
    SAP Note Description:
    Summary
    Symptom
    MDM components stopped communicating after upgrading to 7.1.03
    Other terms
    TCP ports, Firewall, connection, network, SP03, SP3, 7.1
    Reason and Prerequisites
    Starting from version 7.1.03 the MDM suite is using different TCP ports for its operations. The change was in order to be compliant with the Internet Authority for Numbering Assignment. Port numbers changed as follows:
    Application Old Port # New Port #
    MDS 20005 59950
    MDLS 20008 59650
    MDIS 20009 59750
    MDSS 20010 59850
    If firewalls were configured to allow MDM's communication throughout the landscape, they actually might prevent (depending on their rules table) the communication after an upgrade to MDM suite starting at version 7.1.03 and higher.
    Solution
    Revise the firewall rules such that they will allow the communication according to the changes described above.
    In order to check that the ports are allowed to pass trough the firewall a telnet test could be done like so:
    1) Open a terminal window (on UNIX) or a command window (on Windows) on the same machine which hosts the application which tries to connect, and issue the following command:
    telnet <MDM server host name or IP address> <TCP port to test>
    2) If no error response is received than it means that the TCP port is allowed to go trough.
    3) Repeat steps 1,2 for all the other ports need by the application.
    Thanks
    Sowseel
    Edited by: sowseel pasumarthi on Jan 18, 2011 6:36 AM

  • Not able to connect N70 to pc(xp) using ca-53 cabl...

    Not able to connect N70 to pc(xp) using ca-53 cable
    hi i am having this trouble from a year... i am unable to connect my phone n70 using cable to my pc,.,. even after installing all drivers n pc suite n havin it reinstalled also n again doin d same process.. its not getting detected at all.. please help me out... pleaseeee..been tryin 4m a year..nevr checkd des forumss.. hopin som bdy ll help ,me out.. !!!. !!!!

    The DKU-2 cable is no longer supported and so cannot be guaranteed to be compatible with current PC Suites, you should be using either your current CA-53 or the CA-70.
    Have you had the chance to connect any other phone with the PC using this cable? This would test if thr cable itself might be faulty.
    Otherwise remove PC Suite, PC Connectivitiy Solution and Connectivity Cable Drivers from control panel, run the PC Suite Cleaner program that you can get from the PC Suite support pages on the web site, then reinstall everything.

Maybe you are looking for

  • Error in code..please help

    Hi, I'm writing a SIP messaging klient and i am having problem with connecting the client to my SIP-server (OpenSER) javax.sip.InvalidArgumentException: 300:[email protected]: 300:[email protected] at gov.nist.javax.sip.SipStackImpl.createListeni

  • Slow Motion Video

    I would like to slow down a video clip for a basketball highlight video. Can anyone tell me a simple and quick way to do this in FCE4? thanks. MC

  • Cannot connect ipad2 to itunes, apps store and safari???

    I have checked everything i could check so far. My service provider told me to change the DNS numbers which i also did. My router is working excellent and my laptop is in perfect working condition. When i'm at the office my Ipad2 is working fine and

  • How to test if String starts with a Range of numbers

    Hello, I'm reading in a line from a text file and I want to see if that line starts with numbers. I know there is String temp = file.readline(); if (String temp.startsWith(?1-9?); // want to check if string starts with 1 thru 9 Thanks!

  • Upgrade from Mac OS X 10.1.6 to Tiger 10.4

    I'm looking to upgrade my iMac's (G4 700Mhz with 1GB SDRAM) old OS X 10.1.6 (first OS X edition) to the Tiger 10.4. Now I've seen an upgrade disc for sale on eBay and wondered if this would do the trick? Or do I need to upgrade to Panther and then Ti