Not able to connect USB link on WRT160NL router

I just bought a refurbished WRT160NL router. The router is working fine, but when i tried connecting my Extrernal hdd it is not detecting.
It tried using my pen drive(1gb - NTFS formated) its detecting, but cant map the network drive.
I typed \\WRT160NL but no help.
Im using windows 7.

what's the make/model and size of your external hard drive? check the List of compatible USB drives for WRT160NL .if your HDD is not on the list, there is a slim chance that it won't work with this router.
as for mapping the network drive on windows 7, you may try the steps suggested in this article: Mapping the Network Drive.

Similar Messages

After upgrading to lion my internet usb key is not able to connect anymore.can anybody help me?

after upgrading to lion my internet usb key is not able to connect anymore.can anybody help me?

If there are no restrictions engaged and you are not receiving any Error messages or Alerts...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Help : Not able to connect IdeaPad Tablet K1 to PC with the USB data cable

Dear All,
Appreciate very much your help on this.
I am not able to connect my IdeaPadTablet K1 to PC with the USB data cable.
Anyone facing the same problem?
Appreciate your kind advise on the solution.
thanks in advance,
LL.

Hi all,
Can you try the steps outlined in the following link? It had help resolve the issue for some users.
http://consumersupport.lenovo.com/au/en/HintsandTips/hints_show_13180405354336.html
Do feedback.
thanks!
lak_sg
WW Social Media
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Apex link not able to connect from local machine.

Hi,
Here is the scenario.
I have installed oracle apex 3.2 in my vmware linux machine.
I'm able to connect the link (http://b03apex.domain.com) from my linux(vmware) box but I'm not able to connect from windows local machine.
I tried to ping the ip, from both the ends are working but not sure why I'm not able to connect from windows local machine.
local windows ip: 192.168.1.2
vmware Linux ip address : 192.168.1.3
Do I need to do add any parameters in the Apache logs to connect from windows local machine.?
Need your suggestion.
Thanks, Muhammed.

user9354175 wrote:
I tried to ping the ip, from both the ends are working but not sure why I'm not able to connect from windows local machine.In that case, it means there is network connectivity. The problem is thus something else - like a firewall or name resolution failure.
>
local windows ip: 192.168.1.2
vmware Linux ip address : 192.168.1.3
Do I need to do add any parameters in the Apache logs to connect from windows local machine.?No.
Can you ping the VM hostname from your Windows console (instead of IP address)?
Have you tried in your Windows browser the following URL (using IP address of the VM instead of the hostname)?
http://192.168.1.3/
Have you checked that your browser is not configured to use a proxy server?
Have you checked your Windows firewall for allowing tcp web traffic to the virtual machine?
Have you checked for the same on on the virtual machine (firewall will be likely be done using <i>iptables</i>).

Not able to connect Desktop Manager 4.2

HI Sir,
I have Curve 8900,I am not able to connect Windows Desktop manager to sync the data and not able to send and receive the data using blue tooth.Please help me regarding this.
Thanks,
Raju komaturi

Hi and Welcome to the Forums!
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HP Officejet Pro 8600 not able to connect to internet ip setting disabled

My printer has been connected and working in wireless mode for 2 months. now not able to connect and printer is locked and shows "IP no link".

Power off both printer band router. Power on router wait 3 mins. Power on printer and verify it connects to your router and you have a valid IP. Reboot computer and now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Not able to connect N82 to pc in data transfer mod...

I am not able to connect N82 in data transfer mode( other modes are working fine) though i installed latest connectivity cable driver for N82. It says that it could not find any suitable driver(after search cd provided and online).
My current firmware version of N82(RM-313) is 10.0.046. Operating system is Windows Vista. Will the firmware update fix the problem or I have to contact customer care center?
Thank you for your support.
mlhpr
Solved!
Go to Solution.

22-Mar-2008 02:51 PM
scoobyman wrote:
Hi mlhpr
If phone is set to 'data transfer" mode on user interface and USB plugged into PC N82 behaves as a Windows USB mass storage device and you are saying that Windows Vista can't recognize this?
Ya thats is what the problem is. As you said the phone was to behave like USB pendrive in data transfer mode but i am getting this error.
:I first connected the N82 with cable Nokia CA-101 provided with handset and selected the data transfer mode. Then the windows(Vista) icon would appear in task bar showing windows is installing the driver. Then a window pops up saying driver not found and requests permission to search online for driver. When I choose search online for suitable driver, it searches for a while and says no driver found. (net is working prefectly fine). The icon disappears from the bar and phone is inaccessible from windows explorer. But USB indicator on mobile screen is active until i disconnect using mobile connectivity settings.
Actually i wanted this mode for installing the Nokia Maps which requires the phone to be in data transfer mode.
mlhpr

TS1398 I have an ipad and just recently am not able to connect to home wireless wifi, the hourglass just spins when clicking the network to connect, other devices work fine

I have an ipad 2 and just recently am not able to connect to home wireless wifi, the hour glass just spins when clicking the network to connect, other devices work fine and can connect. Was able to connect at school, but not here at home all of a sudden, help?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
Arindam

Hi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam

Not able to connect db using developers(plsql developer,sql developer)

Hi,
I used to work on plsql developer, but since from few days i am not able to connect to it, so i have installed sql developer still i am not able to connect to database.
I can connect to the database using sql*plus. dont know what happend suddenly i have not changed any settings.
I am getting the error when connecting sql developer: Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
when connecting through plsql developer getting the error: ora-12545 connect failed because target host or object does not exist
Please help.
Thanks,
Vinod

Wrong forum - please repost in the SQL Developer forum, edit this post to include the link to the SQL Developer thread and then mark this as ANSWERED.
SQL Developer
>
when connecting through plsql developer getting the error: ora-12545 connect failed because target host or object does not exist
>
In you post on the other forum include your 4 digit Oracle version and the version of SQL Developer that you are using.
Also provide the step by step details of how you are trying to create the new connection.
The error message is telling you that you are using a server or host name that does not exist.

My time capsule sometimes is not able to connect or appear like is out or range , and need wait a few min. to connect again

sometimes , the time capsule is not able to connect and it take a few min. to connect again , even using the airport utilities cannot connect , it shows like is out of the range , when is connect to the line , also cannot use using the new ipad, iphone 4s or airport .

janeyq wrote:
If we replace our Time Capsule, what is the best way to handle the data stored on the old TC?
Archive the material via airport utility (old v5 not v6).. to a USB drive of suitable size for all the data.
Do this before the TC dies. Once dead you will have no choice but to repair it.. or to open and remove the HD and put it in a holder.

Not able to connect to wifi

hi over there,
I just bought curve 9220 and started using it with wifi at home, unfortuantely it keeps saying "not able to connect to network" or " Failed to get an IP address".
Can anyone give me the solution to this pllzzzzzzzzzzzzzzzzz

I'm sorry, but what I requested was that you provide her all of the steps you conduct to attempt any connection, and all of the specific results from each step. For instance, first you go to Manage Connections, then what happens at that point? And what's the next step you take, and it's result? Step by step please, so that we can understand exactly what you are doing, and please include complete error message text if any.
Thanks.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Not able to connect to iTune Store through iTunes on my Windows pc(Windows Vista 64 bits)

I have got a new iPhone 5. I installed iTunes(11.0.1.12) on my home pc (Windwos Vista 64 Bits). However its not able to connect to iTuneStore. It just showing "Accessing iTune Store" nothing happens afterwards. KIndly help me out with this.

There are several things, any one of which or any combo of which may help. So sometimes you have to fiddle to find what works.
Give your device a reset. Hold down the sleep and home keys past when you see the red power down slider and until you see the silver apple. Let it reboot and try again.
Swap out your charger and cable, see if that fixes it or if the issue continues. Try a different USB port.
Make sure your iTunes is up to date. If you have iOS6+ then you need iTunes 11.
Uninstall and reinstall iTunes. You can also look in the control panel and add/remove programs, see if there's something like the apple mobile device driver/control and remove that, then plug your device back in. That is what tells your computer what to do with the iPad.

Clients not able to connect to MS exchange server over a cisco switch

Hello,
I have a Cisco L3 switch.
I have a Exchange server and until i split the network into every thing was working ok, meaning the clients can connect to the Exchange without issues.
But after i split the network into 2 vlans, moving the exchange in one vlan and the clients in another vlan, i have complains saying that the users are not able to connect to exchange periodically.
Even users from the same subnet also cannot connect to the exchange often.
Meaning the clients can connect to the exchange and suddenly it will stop working. at the same time i can ping the exchange and that shows there is no routing issue or LAN issue.
But still clients cant connect to the exchange, when i reboot it will start working again for some time.
wondering whether it could be related to any network related issue or MTU or PMTUD issues.
The whole issue started only after we split the network into two vlans.

If you have physical access to the switch, it may save time to look at the port LEDs which give you the link status or may indicate an error condition (if red or orange). The table below describes the LED status indicators for Ethernet modules or fixed-configuration switches:
http://www.cisco.com/en/US/customer/products/hw/switches/ps700/products_tech_note09186a008015bfd6.shtml

Not able to connect to database some times

some times i am not able to connect to my database via sqlplus.
after entering this command, we don't receive any response. please help.
-bash-3.2$ sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jan 23 11:11:36 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: /as sysdba

Hi Emran,
Set sufficient value of processes/sessions in init/spfile of database , might be session limit of DB is getting exceeded & restricting new connection.
Check alert log & below query o/p , CURRENT_UTILIZATION < MAX_UTILIZATION to get connection to DB
select * from v$resource_limit;Also , try to connect as sqlplus prelim & do hang analyze , refer below link
http://blog.tanelpoder.com/2012/05/08/oradebug-hanganalyze-with-a-prelim-connection-and-error-can-not-perform-hang-analysis-dump-without-a-process-state-object-and-a-session-state-object/
sqlplus -prelim "/as sysdba"
ORADEBUG HANGANALYZE 3Thanks,
Ajay More
http://www.moreajays.com

Not able to connect USB link on WRT160NL router

Similar Messages

Maybe you are looking for