Not able to connect with my router, but other networks work ok.

I have a 2d generation iPod Touch. I can't connect to my home network that operates on a DLink DIR-628 router. However I can connect to other access points with no trouble at all. When my iPod tries to connect with my router, it asks for my password and I enter the password I think is correct, but it won't accept it. When I check the router web page there is no password visible. Does the problem lie with the Router or with the iPod Touch? I have three other computers and two wireless printers that are operating through the router with no problem at all.

Have you tried:
- Resetting your iPod:
- Resetting network settings on the iPod: Setting>General>reset>Reet Network Settins
- Powering off and then back on your router
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Similar Messages

  • In Aperture 3.4.1, I am not able to connect with referenced files on a network

    I am running OS X 10.8.2 and Aperture 3.4.1, and am unable to connect with referenced files on a network.  Specifically, the referenced files reside on my iMac and I am attempting to connect to them from my MBP.  They appear in red in the dialogue box.  While I know this has been a long standing issue in other versions, I was hoping it had been solved by now.  Any assistance will be appreciated.
    Thanks -
    Dudley

    http://support.apple.com/kb/HT5922
    If you want to mirror your desktop, see:
    http://support.apple.com/kb/HT5404
    Regards.

  • Officejet not able to connect with MAC wirelessly but will connect to W7 PC

    I have a 6700 Office jet and have it setup to print wirelessly with a W7 PC. The Mac will not connect to the printer wirelessly but will print via usb connection. Any hints?

    Hi jecp,
    It sounds like the router is not broadcasting the Bonjour protocol. The Mac uses Bonjour and the Windows uses DHCP. You may need to contact the Internet Service Provider (IPS), but you can try the steps below, I have seen success with a simple reboot.
    Leave the printer on and unplug the power cable
    Shut down the Mac, Click the Apple Icon and select Shut Down
    Leave the router on and unplug the power cable, do not press any buttons
    After one full minute, plug the router back in and wait for the lights to illuminate again and stedily
    Plug the printer back in and wait for the wireless light to become solid
    Turn the computer back on
    Now try to add the printer to the Print and Scan in System Preferences.
    Please let me know if this resolves the issue. I am happy to provide additional assistance if necessary.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Network Devices not able to connect to the Internet, but local network has no issues.

    Hello All,
    I have been having this problem for the past 4 months or so(ever since I got the server).  I have a Windows Server 2012 R2 machine running a DHCP server.  I have 2 network devices installed on it.  One hardwired to the motherboard and one
    connected by a PCI-E slot.  I got a second card because I thought something was going on with the primary NIC.  However I have the same issue with the 2nd NIC.  I have remedied the issue by setting the server to restart every 2 days, very inconvenient. 
    After restart, everything is fine for 2 days.  All drivers are fully up-to-date and Windows is up-to-date as of last months' updates.  I also updated BIOS to the latest version.  Any help will be much appreciated.
    I have ruled out hardware issues, and here are my specs:
    Intel Core i7 3rd Gen @3.4GHz
    8GB DDR3 RAM
    Server 2012 R2 Standard 64-Bit
    Intel On-board Gigabit Ethernet
    TrendNet Gigabit PCI-E (Realtek Chip embedded, uses Realtek drivers)
    Thanks

    Hi,
    Is DHCP the only service that the server is used for?
    What are you using for DNS?
    When internet connectivity is lost on a client device, what does IPConfig show (a correctly assigned DHCP address or an APIPA address)?
    Is DHCP AD Integrated?
    How long is the DHCP lease?
    Steven Hodson | http://www.stevenhodson.com | @_hodders
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This posting is provided "AS IS" with no warranties, and confers no rights.

  • My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help.... :(

    My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help....

    No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.

  • Datareader is not able to connect with database-Urgent

    Hi All,
    All of a sudden the Datareader component in my ML experiment is not able to connect with database with the following error:
    [ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: The value's length for key 'password' exceeds it's limit of '128'.
    Module finished after a runtime of 00:00:00.2031339 with exit code -2
    Module failed due to negative exit code of -2
    It complains about the password being long-but the same credentials I have been using for the last 2 months and still able to use it to run sql queries on that same database using the management portal.
    It appears that Azure encrypts the password and that encrypted password is too long...just my guess after looking that the output.Inside Ml it just says as internal error
    Would appreciate if someone can point to the issue at the earliest...(There is a demo early next week)
    Subscription:Enterprise,
    LOCATION: East Asia
    Regards,
    Biswajit

    Hi,
    Please check this url:
    https://studio.azureml.net/Home/ViewWorkspace/bc85d4f81d2246c4b1430eb395229a3a?&hashSeg=#Workspaces/Experiments/Experiment/bc85d4f81d2246c4b1430eb395229a3a.f-id.11776ae4400f4c1aa9f58308c30810fa/ViewExperiment
    which is an experiment which I created doing save as of the experiment in which the data reader works.
    I stripped everything except the data reader and setup the rest of the components...I finally have to write the results back ,so also pulled a Writer component.
    Now,the data reader works fine..but the Writer fails:
    Error 0071: Incorrect username "acnadmin" or password is passed
    Strangely,its the same credentials set in the DataReader.
    Looks like all the DataInput/Output components created recently only have the problem.
    Once again,while the datareader in this case passes the password in plain text,the writer encrypts,hence fails.

  • I am not able to connect with Itunes Match. I constantly receive the message error 4010

    I am not able to connect with Itunes Match. I constantly receive the error 4010.

    I can run the general "Update iTunes Match" from the menu but cannot add individual tracks by right-clicking (control-clicking) on them the way I usually do. Then I get the 4010 error message.
    Based on other posts here, I can assume the problem is not just me.

  • BAPI not able to connect with Livecache

    Hello All,
       I am using "BAPI_PIRSRVAPS_GETLIST" .
       But not get pegging detail. When I debug it is not able to connect with livecache.
       How to use BAPI FM in Program, How to connect with livecache ?
       Anybody has sample ABAP program for this ?
    Thanks in Advance
    Amisha

    Hi All,
    When I try to use BAPI <b>BAPI_PIRSRVAPS_GETLIST</b> I am not getting pegging information, please help me.
    Thanks,
    Srinivasa.

  • Not able to connect with iTunes

    its has been 6 days already and i am not able to connect with itunes to purchase something.
    i have used visa and mastercard and i also have money credited to my account.
    please help!

    Hello FoxyNix
    Check out the steps below to troubleshoot you issue with connecting to the iTunes Store on your iPhone
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time. 
Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Regards,
    -Norm G.

  • I am not able to connect with another ipod via bluetooth can u pls help me

    i am not able to connect with another ipod via bluetooth can u pls help me

    Are yo trying to pair via an app that supports BT pairing?  If you are I would try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -Resetting network settings on the iPod: Settings>General>Reset>Reset Network Settings

  • Not able to connect with Sql Server Database

    Hi,
    I'm not able to connect with Sql Server database.during making connection I'm getting the following error:
    "Status : Failure -I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property."
    Please help
    Regards,
    Neeraj Goel

    Hi,
    I'm using Sql Server 2000.
    I downloaded the driver from the given site and still having the same problem. Do I need to copy the driver file in some specific folder.
    Regards,
    Neeraj Goel

  • HT4623 I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. since the late os upgrace I have not been able to connect w

    I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. Since the late os upgrace I have not been able to connect with face time.

    Read http://support.apple.com/kb/ts3367

  • I have iphone 6 plus and not able to connect with my Nokia bluetooth device

    not able to connect with bluetooth devices

    iPhone only does limited forms of bluetooth connections, such as with speakers.
    You cannot transfer files from an iPhone to a Nokia phone using bluetooth.
    What type of Nokia device are trying to connect with? Is the Nokia in pairing mode?
    What exactly are you attempting to do?

  • Dispatcher stopped and not able to connect with sql server

    Hi ,
                       In one of test system disp+work is started and then within no time its stopped.
    I am able to connect with  sql server 2005 database but while starting sap  dispatcher is stopping.
    Here is the log of  dev_wo
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Thu Jan 05 07:24:02 2012
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' ...
    B  Library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' loaded
    B  Version of 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' is "700.08", patchlevel (0.72)
    B  New connection 0 created
    M sysno      11
    M sid        DE1
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    75
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        988
    M
    M  kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
    M  length of sys_adm_ext is 572 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 988) [dpxxdisp.c   1299]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          23936     (1408)
    M  DpShMCreate: sizeof(tm_adm)          3994272     (19872)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1440)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 07F90040, size: 4659000)
    M  DpShMCreate: allocated sys_adm at 07F90040
    M  DpShMCreate: allocated wp_adm at 07F91E40
    M  DpShMCreate: allocated tm_adm_list at 07F97BC0
    M  DpShMCreate: allocated tm_adm at 07F97BF0
    M  DpShMCreate: allocated wp_ca_adm at 08366E90
    M  DpShMCreate: allocated appc_ca_adm at 0836CC50
    M  DpShMCreate: allocated comm_adm at 0836EB90
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 083EFA50
    M  DpShMCreate: allocated gw_adm at 083EFA90
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 083EFAC0
    M  DpShMCreate: allocated wall_adm at 083EFAC8
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Thu Jan 05 07:24:03 2012
    M  ThInit: running on host sugarland
    M 
    M Thu Jan 05 07:24:04 2012
    M  calling db_connect ...
    C  Warning: Env(MSSQL_SERVER) [SUGARLAND\DE1] <> Prof(dbs/mss/server) [SUGARLAND]. Profile value will be used.
    C  Thread ID:708
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      72
    C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
    C  np:(local) connection used on SUGARLAND
    C  CopyLocalParameters: dbuser is 'de1'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:24:19 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:24:34 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:24:49 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn to np:(local).
    C  Retrying without protocol specifier: (local)
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:25:05 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:25:21 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C 
    C Thu Jan 05 07:25:37 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn. 0
    B  ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Thu Jan 05 07:25:37 2012
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10354
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 988) [dpnttool.c   327]
    Please help me on this
    Thanks
    Srikanth

    Hi Amit, 
                 I restarted the system but dispatcher still in same stage.
    Here is the log for dev_w0
    ========================================
    Fri Jan 06 03:41:06 2012
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn. 0
    B  ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Fri Jan 06 03:41:06 2012
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10354
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3632) [dpnttool.c   327]

  • Monitor not able to connect with Dell Laptop

    Hi,
    I have a dell Laptop Dell inspiron 3521 this has got only an HDMI Port as output, I can connect this laptop to other monitor, & TVs with HDMI but cannot do so with my HP2311F Part number LA176AA. I have also tried to connect the latptop using a HDMI to VGA convertor.
    Manish

    Hello Manish_Das,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that you are not able to connect to your HP monitor, and I would be happy to assist you! To begin, I will need to ask you a few questions:
    What version of Windows do you have installed on your computer?
    Has your computer completed all of its important Windows Updates?
    Are you able to connect your monitor to a different computer?
    In the meantime, I recommend following this document on when the Monitor is Blank. This should help diagnose any possible connection or hardware issues that may be present. In addition, I also suggest downloading the HP 2311f 23 inch Diagonal LED Monitor Drivers for your laptop.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Maybe you are looking for

  • ICal alarm problem

    I set alarms for most calendar events. They work fine if I have the computer turned on when the alarm is scheduled to go off. However, alarms will not show up if they are scheduled to go off when my Mac is not turned on. For example, if I set an alar

  • WUC-015 on 9iDS

    I am trying get CLIENT_TEXT_IO working on 9iDS (and later to 9ias) ubt I get the WUC-015 error. I am confused as to what all has to be configured on the DS as opposed to 9ias. Can someone give me the steps as to what to do on DS to keep from getting

  • Enhancement object does not exist for enhancement implementation

    Hi Experts, When i tried activating my implementation, i got the sujected error. any kind of inputs will be very helpful. This is an existing implementation and was last changed in October, I just wanted to added few more changes to that. Here is the

  • Saving photos as a jpeg

    When I open Lightroom to develop and then send to CS3 to fine tune, I can not save the photo anywhere as a jpeg. So once I am finished and want a jpeg version, how can I get it to save that way? Thanks. (Note: Starting from RAW images)

  • How to get old bills?

    Hello, I am trying to download all my old BT bills. The system only lets me download the 15 most recent. Is is possible to download all the other bills from my account history?