Not able to connect with remote speakers after successfully set up

I just finished setting up successfully (joining existing wireless network) but when I go to Itunes and select my remote speakers it just goes connecting to airport and then stops. Any ideas why?

You might want to try upgrading to the latest version of JavaMail (1.4.3), which makes use
of SSL somewhat simpler. Also, the file SSLNOTES.txt included with JavaMail has some
tips for debugging problems such as this, as does the JavaMail FAQ.
Most often this error is caused by not having the appropriate certificates in your local trust
store. The JDK normally comes with the required root certificates, but if you're running in
an application server environment you might be using a different trust store.

Similar Messages

Datareader is not able to connect with database-Urgent

Hi All,
All of a sudden the Datareader component in my ML experiment is not able to connect with database with the following error:
[ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: The value's length for key 'password' exceeds it's limit of '128'.
Module finished after a runtime of 00:00:00.2031339 with exit code -2
Module failed due to negative exit code of -2
It complains about the password being long-but the same credentials I have been using for the last 2 months and still able to use it to run sql queries on that same database using the management portal.
It appears that Azure encrypts the password and that encrypted password is too long...just my guess after looking that the output.Inside Ml it just says as internal error
Would appreciate if someone can point to the issue at the earliest...(There is a demo early next week)
Subscription:Enterprise,
LOCATION: East Asia
Regards,
Biswajit

Hi,
Please check this url:
https://studio.azureml.net/Home/ViewWorkspace/bc85d4f81d2246c4b1430eb395229a3a?&hashSeg=#Workspaces/Experiments/Experiment/bc85d4f81d2246c4b1430eb395229a3a.f-id.11776ae4400f4c1aa9f58308c30810fa/ViewExperiment
which is an experiment which I created doing save as of the experiment in which the data reader works.
I stripped everything except the data reader and setup the rest of the components...I finally have to write the results back ,so also pulled a Writer component.
Now,the data reader works fine..but the Writer fails:
Error 0071: Incorrect username "acnadmin" or password is passed
Strangely,its the same credentials set in the DataReader.
Looks like all the DataInput/Output components created recently only have the problem.
Once again,while the datareader in this case passes the password in plain text,the writer encrypts,hence fails.

I have iphone 6 plus and not able to connect with my Nokia bluetooth device

not able to connect with bluetooth devices

iPhone only does limited forms of bluetooth connections, such as with speakers.
You cannot transfer files from an iPhone to a Nokia phone using bluetooth.
What type of Nokia device are trying to connect with? Is the Nokia in pairing mode?
What exactly are you attempting to do?

I am not able to connect with Itunes Match. I constantly receive the message error 4010

I am not able to connect with Itunes Match. I constantly receive the error 4010.

I can run the general "Update iTunes Match" from the menu but cannot add individual tracks by right-clicking (control-clicking) on them the way I usually do. Then I get the 4010 error message.
Based on other posts here, I can assume the problem is not just me.

I am not able to connect with another ipod via bluetooth can u pls help me

i am not able to connect with another ipod via bluetooth can u pls help me

Are yo trying to pair via an app that supports BT pairing? If you are I would try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-Resetting network settings on the iPod: Settings>General>Reset>Reset Network Settings

BAPI not able to connect with Livecache

Hello All,
   I am using "BAPI_PIRSRVAPS_GETLIST" .
   But not get pegging detail. When I debug it is not able to connect with livecache.
   How to use BAPI FM in Program, How to connect with livecache ?
   Anybody has sample ABAP program for this ?
Thanks in Advance
Amisha

Hi All,
When I try to use BAPI <b>BAPI_PIRSRVAPS_GETLIST</b> I am not getting pegging information, please help me.
Thanks,
Srinivasa.

Not able to connect with iTunes

its has been 6 days already and i am not able to connect with itunes to purchase something.
i have used visa and mastercard and i also have money credited to my account.
please help!

Hello FoxyNix
Check out the steps below to troubleshoot you issue with connecting to the iTunes Store on your iPhone
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.  Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular. Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Regards,
-Norm G.

Not able to connect with Sql Server Database

Hi,
I'm not able to connect with Sql Server database.during making connection I'm getting the following error:
"Status : Failure -I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property."
Please help
Regards,
Neeraj Goel

Hi,
I'm using Sql Server 2000.
I downloaded the driver from the given site and still having the same problem. Do I need to copy the driver file in some specific folder.
Regards,
Neeraj Goel

My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help.... :(

My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help....

No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.

HT4623 I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. since the late os upgrace I have not been able to connect w

I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. Since the late os upgrace I have not been able to connect with face time.

Read http://support.apple.com/kb/ts3367

Dispatcher stopped and not able to connect with sql server

Hi ,
                   In one of test system disp+work is started and then within no time its stopped.
I am able to connect with sql server 2005 database but while starting sap dispatcher is stopping.
Here is the log of dev_wo
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Thu Jan 05 07:24:02 2012
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' ...
B Library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno      11
M sid        DE1
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    75
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        988
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 988) [dpxxdisp.c   1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          23936     (1408)
M DpShMCreate: sizeof(tm_adm)          3994272     (19872)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1440)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 07F90040, size: 4659000)
M DpShMCreate: allocated sys_adm at 07F90040
M DpShMCreate: allocated wp_adm at 07F91E40
M DpShMCreate: allocated tm_adm_list at 07F97BC0
M DpShMCreate: allocated tm_adm at 07F97BF0
M DpShMCreate: allocated wp_ca_adm at 08366E90
M DpShMCreate: allocated appc_ca_adm at 0836CC50
M DpShMCreate: allocated comm_adm at 0836EB90
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 083EFA50
M DpShMCreate: allocated gw_adm at 083EFA90
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 083EFAC0
M DpShMCreate: allocated wall_adm at 083EFAC8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Jan 05 07:24:03 2012
M ThInit: running on host sugarland
M
M Thu Jan 05 07:24:04 2012
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SUGARLAND\DE1] <> Prof(dbs/mss/server) [SUGARLAND]. Profile value will be used.
C Thread ID:708
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll'
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      72
C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SUGARLAND
C CopyLocalParameters: dbuser is 'de1'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:24:19 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:24:34 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:24:49 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:25:05 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:25:21 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:25:37 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Thu Jan 05 07:25:37 2012
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10354
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 988) [dpnttool.c   327]
Please help me on this
Thanks
Srikanth

Hi Amit,
             I restarted the system but dispatcher still in same stage.
Here is the log for dev_w0
========================================
Fri Jan 06 03:41:06 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Fri Jan 06 03:41:06 2012
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10354
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3632) [dpnttool.c   327]

Not able to connect database remotely

Hi All,
I have an issue with remote connectivity to database EAIDEV.
Application Team is not able to connect to EAIDEV database as jcaps_user.
Here is the connection string :
Server Name : 10.1.32.66
Port : 1622
User id : jcaps_user
Coud any one plz help me on this ?
Thanks a lot.

tvenkatesh07 wrote:
Hi All,
I have an issue with remote connectivity to database EAIDEV.
Application Team is not able to connect to EAIDEV database as jcaps_user.
Here is the connection string :
Server Name : 10.1.32.66
Port : 1622
User id : jcaps_userWell, what's the error that they are facing?
Aman....
>
Coud any one plz help me on this ?
Thanks a lot.

Upgrade to iTunes 7.2 broke connection with remote speakers

There have been a few discussions about the inability of iTunes to connect to remote speakers in the past, and I found one that was answered regarding an upgrade to 7.0 back in September 2006 - b noir recommended the help article posted on his page: http://docs.info.apple.com/article.html?artnum=304371
My issue is the same as the one posted in Sept. 2006, but it only started when I downloaded the upgrade to iTunes 7.2. I see the remote speakers greyed out in my iTunes speaker list but can't select them. The fix in the help article above of configuring IPv6 doesn't help. Has anyone else run into this/have any suggestions for me? My wireless network consists of 2 Airport Expresses; the extension is the one hooked up to my speakers.
Many, many thanks!

I'm experiencing something similar where my remote speakers are working well from my Macs (wired) and Windows Vista laptop (wireless) but do not show up at all from my Windows XP desktop (wired).
I do have Symantec Personal Firewall running, but I have (1) trusted my local internal network, (2) explicitly opened ports 3689 and 5353 and (3) tried it with the firewall disabled with no luck. I do not have Windows Firewall running, and I don't believe I have anything else that would be limiting network traffic. I do not have Bonjour or Rendevous services running. I can ping the AEs just fine (I have 3 AEs), and I am on the same subnet. I have selected LOOK FOR REMOTE SPEAKERS in the iTunes settings, and I am running the latest version of iTunes (7.2). I have also not tried downgraded to an earlier version of iTunes, but for now I'd rather get this fixed in another fashion as 7.2 works well from my other machines.
I hope the above description (with fixes recommended by other users in other threads) is helpful. I appreciate any input or feedback people may have.

Reporting Services not able to connect with sharepoint

HI
We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion that not able to connect to the reporting services.
Request you to throw some light on the same.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hi Geeth,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
your SQL Server and SharePoint? It is benefit for us to do further analysis.
References:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

TS3992 I am not able to connect with iCloud since I updated to the new iOS 6.0

I am not able to connect to iCloud after updating to the new iOS 6.0. I have frequent message about my settings in iCloud and Facebook and iTunes, anything I can do to resolve this problem? I have an iPhone 4S

What happens when you try?

Not able to connect with remote speakers after successfully set up

Similar Messages

Maybe you are looking for