Not able to copletly Uninstall directory server
Hi All,
I am trying to install Portal server(7.0), directory server,access manager,with SRAG on single machine.
Start from begining I am getting the error Portal server installation failed and configuration failed.
I uninstalled through ./unistalled command and also removed SUNW Package from /opt, /etc/opt ,/var/opt/ and moved the product registery file . First time it unistalled sucessfully. Then second time i tried to installe the same , again failed .
I am trying to unistalled and i saw the summary , i am seeing that DS is patially unistalled .i removed all the SUNW packege and mps directory as define above
But Installing in next time(it means 3 rd time) it is showing DS is installed and i am going with installed DS , Then in installing process it is asking Access manager Directory server host name -I m giving some maching host name but is saying error in host name please provide correct host name.
Now I am unable in install and uninstall both is stucked now .
Can you please help me on this sitution.
Portal server version 7.0
access manager 7.0
DS(directory server) version 5.2
Thanks,
Hi,
there is a solution. I recommend to make a file included a list of all JES packages (look at JES install media), but dont remove shared_components packages, they include Solaris system packages !
http://swforum.sun.com/jive/thread.jspa?threadID=104413
Peter
Similar Messages
-
Not able to completly Uninstall Directory Server
Hi All,
I am trying to install Portal server(7.0), directory server,access manager,with SRAG on single machine.
Start from begining I am getting the error Portal server installation failed and configuration failed.
I uninstalled through ./unistalled command and also removed SUNW Package from /opt, /etc/opt ,/var/opt/ and moved the product registery file . First time it unistalled sucessfully. Then second time i tried to installe the same , again failed .
I am trying to unistall and i saw the summary , i am seeing that DS is patially unistalled .i removed all the SUNW packege and mps directory as define above
But Installing in next time(it means 3 rd time) it is showing DS is installed and i am going with installed DS , Then in installing process it is asking Access manager Directory server host name -I m giving some maching host name but is saying error in host name please provide correct host name.
Now I am unable in install and uninstall both is stucked now .
Can you please help me on this sitution.
Portal server version 7.0
access manager 7.0
DS(directory server) version 5.2
Thanks,
Message was edited by:
Raja_Perumal_Rhi Raja,
THe machine name u r giving has slapd running on it ?? -
Old Netscape console 4.2 not working properly with new Directory Server 5.2
After successfully installing Messaging Server 5.2 and applying patch 2, the old Netscape Console doesn't work properly, I tried running the script which is given in the link
http://docs.sun.com/source/816-6734-10/index.html
which hobbles the server by creating a set of dummy jar files in order for the directory server console not making any changes on the messaging server. At first I got these messages:
Failed to install a local copy of msgadmin52.jar or one of its supporting files: not a ZIP file (END header not found)
I got the same message for these 2 files:
admserv42.jar
msgadmin52.jar
After that I made real dummy jar files using a zero-length file I created with touch and I got these messages:
class com.netscape.management.admser.AdminServer not found
After that I erased all the files created by the script and I get these messages:
failed to install a copy of admserv51.jar or one of its supporting files: null
failed to install a copy of msgadmin.jar or one of its supporting files: msgadmin52.jar not found at http://192.168.10.205:5001/
and for admserv42.jar I get the same message
Does anyone have a clue on what to do next??
thanks in advance
EduardoThe thing is that the netscape console 4.5 won't work properly with messaging server 5.2, and the directory server console is not working properly for the directory server. I already know the limitations about these consoles since it is explained in the doc where the procedure of migrating from a 4.x directory server to 5.1. I
-
Not able to start the weblogic server ....
Hi All,
I am using JDeveloper 11.1.1.6 .
I am not able to start the weblogic server .I am getting below Exception .I am not sure where I need to check,,
Error at line:2333 col:31 '' expected a valid beginning name character
at weblogic.xml.babel.scanner.Name.read(Name.java:33)
at weblogic.xml.babel.scanner.Name.read(Name.java:20)
at weblogic.xml.babel.scanner.OpenTag.read(OpenTag.java:58)
at weblogic.xml.babel.scanner.Scanner.startState(Scanner.java:251)
at weblogic.xml.babel.scanner.Scanner.scan(Scanner.java:178)
at weblogic.xml.babel.baseparser.BaseParser.accept(BaseParser.java:533)
at weblogic.xml.babel.baseparser.Space.parse(Space.java:19)
at weblogic.xml.babel.baseparser.BaseParser.parseElement(BaseParser.java:474)
at weblogic.xml.babel.baseparser.BaseParser.parseSome(BaseParser.java:326)
at weblogic.xml.stax.XMLStreamReaderBase.advance(XMLStreamReaderBase.java:195)
at weblogic.xml.stax.XMLStreamReaderBase.next(XMLStreamReaderBase.java:237)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunctionParameters(StaxPolicyStoreParser.java:2207)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunction(StaxPolicyStoreParser.java:2135)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunctions(StaxPolicyStoreParser.java:2072)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processAppPolicy(StaxPolicyStoreParser.java:796)
at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processPolicyStore(StaxPolicyStoreParser.java:521)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:120)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:411)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.<init>(XmlDataStore.java:276)
at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.getInstance(XmlDataStore.java:209)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:492)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:276)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)
at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
at oracle.security.jps.internal.policystore.PolicyUtil$2.run(PolicyUtil.java:2827)
at oracle.security.jps.internal.policystore.PolicyUtil$2.run(PolicyUtil.java:2821)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2821)
at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<Jul 19, 2013 11:11:09 AM IST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: Cannot read from policy store. Reason is PolicyStore Error, javax.xml.stream.XMLStreamException: Error at line:2333 col:31 '
Thanks ...hi user,
did you check this.
diehn.net/blog &raquo; Blog Archive &raquo; Weblogic AdminServer refused to start &#8211; truncated syste… -
Not able to start Integrated Weblogic server
Hi All,
I have installed Jdeveloper & Weblogic server in my system. I am able to deploy my SOA peojects in em console. But when i try to run a JSF project , it is throwing an error message like not able to start Integrated Weblogic Server. And Could not read old style optfile from D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt. I dont have my middleware in D:\OracleOSB\Middleware, But i have created the Middleware home in D:\Oracle\Middleware.
I reinstalled SOA sutie, Jdeveloper & Weblogic server but stilll then i am getting the same error when i try to start Integrated Weblogic server. Please find below the error message:
*** Using port 7101 ***
C:\Users\249103\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
The system cannot find the path specified.
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=D:\OracleOSB\Middleware\wlserver_10.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrf.jar;D:\OracleOSB\Middleware\wlserver_10.3\server\lib\xqrl.jar
PATH=D:\OracleXE\app\oracle\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2123-windows-ia32, compiled mode)
Starting WLS with line:
D:\Oracle\MIDDLE~1\JROCKI~1.0-6\bin\java -Xms256m -Xmx512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\OracleOSB\Middleware\wlserver_10.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -da -Dplatform.home=D:\OracleOSB\Middleware\wlserver_10.3 -Dwls.home=D:\OracleOSB\Middleware\wlserver_10.3\server -Dweblogic.home=D:\OracleOSB\Middleware\wlserver_10.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=D:\OracleOSB\Middleware\oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\OracleOSB\Middleware\oracle_common\modules\oracle.ossoiap_11.1.1,D:\OracleOSB\Middleware\oracle_common\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= weblogic.Server
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
[ERROR][cgdir ] Could not read old style optfile from D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt: Could not open D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt
Exception in thread "Main Thread" java.lang.NoClassDefFoundError: weblogic/Server
Caused by: java.lang.ClassNotFoundException: weblogic.Server
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: weblogic.Server. Program will exit.
Process exited.
Can anyone help me to overcome this issue.
thanks in advance.Try checking the "C:\Users\249103\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd" startup file. It seems containing old references to D:\OracleOSB instead of D:\Oracle ...
-
Not able to connect with Sql Server Database
Hi,
I'm not able to connect with Sql Server database.during making connection I'm getting the following error:
"Status : Failure -I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property."
Please help
Regards,
Neeraj GoelHi,
I'm using Sql Server 2000.
I downloaded the driver from the given site and still having the same problem. Do I need to copy the driver file in some specific folder.
Regards,
Neeraj Goel -
Not Able to Promote DC to server even i am using built in Administrator Account.
hi,
i am facing below mentioned issue from last 4 to 5 days and i am very frustrating about this error and nobody give me a proper solution. if any anybody facing this kind of issue please give me a solution this will very helpful for me.
"Windows Server 2012 domain controllers have a default for the security setting named "Allow cryptography algorithms compatible with Windows NT 4.0" that prevents weaker cryptography algorithms when establishing security channel sessions."
Thanks & Regards,
Sushant Chavan.Hi Sushant,
>>Not Able to Promote DC to server even i am using built in Administrator Account.
I have seen your thread "Verification of prerequisites for Domain Controller promotion failed" and provided a reply.
Verification of prerequisites for Domain Controller promotion failed
http://social.technet.microsoft.com/Forums/en-US/23f33ffa-a847-47bc-81d4-569f8e195886/verification-of-prerequisites-for-domain-controller-promotion-failed?forum=winserver8gen
In the reply, it provides a step-to-step guidance for setting up a Windows Server 2012 Domain Controller. Have we followed it to promote the server?
Best regards,
Frank Shen -
Not able to boot OES admin server
Hi,
I am not able to boot the admin server after running the install-ales-schema.bat. It gives Arme not Ready Exception.
<Apr 24, 2010 9:03:12 PM CDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: Weblogic.security.SecurityInitializationException: User admin is not permitted to boot the server; The server policy may have changed i
n such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions. weblogic.security.SecurityInitializationException: User admin is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
BootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:991)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
Edited by: user12057577 on Apr 24, 2010 3:17 AMHi,
Can you mention the steps you used before running the ales_install script? Which WLS version are you using for Admin Server? Is it CP3 or CP4 patched? -
Hello friends..i m not able to connect MS SQL SERVER 2005 FROM cmd prompt
dear friends,
i m not able to connect MS SQL SERVER from command prompt..
do you know how to connect from command prompt or any other ways to connect to database only for delete SAP* user purpose.
thanks
zaheerHi,
you can use the SQLCMD tool:
Microsoft (R) SQL Server Command Line Tool
Version 10.50.1600.1 NT x64
Copyright (c) Microsoft Corporation. All rights reserved.
usage: Sqlcmd [-U login id] [-P password]
[-S server] [-H hostname] [-E trusted connection]
[-N Encrypt Connection][-C Trust Server Certificate]
[-d use database name] [-l login timeout] [-t query timeout]
[-h headers] [-s colseparator] [-w screen width]
[-a packetsize] [-e echo input] [-I Enable Quoted Identifiers]
[-c cmdend] [-L[c] list servers[clean output]]
[-q "cmdline query"] [-Q "cmdline query" and exit]
[-m errorlevel] [-V severitylevel] [-W remove trailing spaces]
[-u unicode output] [-r[0|1] msgs to stderr]
[-i inputfile] [-o outputfile] [-z new password]
[-f <codepage> | i:<codepage>[,o:<codepage>]] [-Z new password and exit]
[-k[1|2] remove[replace] control characters]
[-y variable length type display width]
[-Y fixed length type display width]
[-p[1] print statistics[colon format]]
[-R use client regional setting]
[-b On error batch abort]
[-v var = "value"...] [-A dedicated admin connection]
[-X[1] disable commands, startup script, enviroment variables [and exit]]
[-x disable variable substitution]
[-? show syntax summary]
You have to have the SQL Server tools installed on the box, to get sqlcmd.
You then can connect with SQL authentication
sqlcmd -S <Servername\Instancename> -U user -P password
or with windows authentication
sqlcmd -S <Servername\Instancename> -E
Best regards
Clas -
Project was not able to connect to project server
We have a user running Project 2007 who gets the following error when trying to open Project:
"Project was not able to connect to project server because of the following error: the credentials you used to login may not be correct."
The users PC had been disjoined and rejoined to our domain to fix a separate issue and since doing that she is getting this error when trying to open project. We have confirmed her network credentials are good and she is able to access other network resources
with no problem.
Thanks
Hank VareSorry for the abbreviation used, by PWA i mean Project Web Access, which is the other interface for Project server essentially the IE where you open the Project Web App
I asked this based on the assumption given the error "Project was not able to connect to project server "
Hence assuming you are trying to connect to project server and you have a project server environment, if that's not the case and you are working standalone then navigate to Start >> All programs >> Microsoft office >> Microsoft Office tools
>> Microsoft Project Server Accounts >> Select the computer and Set it as default
Thanks | epmXperts | http://epmxperts.wordpress.com -
Not able to select physicalschema directory for file data server in ODI 11g
Hi,
I am a beginner to ODI tech and stuck up with an error while doing a tutorial (mentioned in this link - http://st-curriculum.oracle.com/obe/fmw/odi/odi_11g/ODIproject_ff-to-ff/ODIproject_flatfile-to-flatfile.htm).
While creating a physical schema for default file server(FILE_GENERIC) , I am not able to select schema directories and the name field with value 'FILE_GENERIC.Directory' is grayed out (non editable)
I have gone through many documents but could not find any relevant information for this.
So could you please let me know if any configurations required for this?
Thanks,
AnushaHi Oleg,
Thanks for your reply.
While creation of physical schema , Name field is grayed out , is that the default behaviour of the screen? because in the tutorial I could see the name filead is pointing to a file directory path.
Thanks,
Anusha -
I have weblogic server 5.1.0 with the sp8 running on Windows NT server 4.0.
The weblogic server is configured to use LDAP realm (Netscape directory
server 4.12).
When I try to run weblogic server and I am getting the following errors:
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.ExceptionInInitialize
or: weblogic.security.ldaprealm.LDAPRealmException: cannot connect to ldapse
without a principal to authenticate as
at weblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
.java, Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.ExceptionInInitializerError: weblogic.security.ldaprealm.LDAPRealm
ption: cannot connect to ldapserver without a principal to authenticate as
at weblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
.java, Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
And here is the my ldaprealm.properties file
netscape.server.host=localhost
netscape.server.port=389
netscape.server.ssl=false
netscape.server.principal=uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot
netscape.server.credential=password
netscape.user.dn=ou=People, o=towers.com
netscape.user.filter=(&(uid=%u)(objectclass=person))
netscape.group.dn=ou=Groups, o=towers.com
netscape.group.filter=(&(cn=%g)(objectclass=groupofuniquenames))
netscape.membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquename
s))
By looking at the error message, it seems like the "server.principal" and
"server.credential" info is not correct.
But I was able to use the same Netscape Directory server with Welogic 5.1.0
with sp4, although the ldaprealm.properties file has somewhat different
format.
Did anyone have similar problems with sp8?
Thanks in advance for any suggestions.BEA support just gave me the solution.
They told me to uncomment out the line
server.alias=netscape
in the ldaprealm.properties file
And I am able to start weblogic with my NIS
Thanks
"Enrique" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
Have you try to remove the "system" user on the LDAP server?
Regards.
"Honghai Zhang" <[email protected]> wrote:
I have weblogic server 5.1.0 with the sp8 running on Windows NT server
4.0.
The weblogic server is configured to use LDAP realm (Netscape directory
server 4.12).
When I try to run weblogic server and I am getting the following errors:***************************************************************************
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException:
java.lang.ExceptionInInitialize
or: weblogic.security.ldaprealm.LDAPRealmException: cannot connect toldapse
without a principal to authenticate as
atweblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
..java, Compiled Code)
atweblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
atweblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.ExceptionInInitializerError:weblogic.security.ldaprealm.LDAPRealm
ption: cannot connect to ldapserver without a principal to authenticate
as
atweblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
..java, Compiled Code)
atweblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
atweblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)***************************************************************************
And here is the my ldaprealm.properties file////////////////////////////////////////////////////////////////////////////
netscape.server.host=localhost
netscape.server.port=389
netscape.server.ssl=false
netscape.server.principal=uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot
netscape.server.credential=password
netscape.user.dn=ou=People, o=towers.com
netscape.user.filter=(&(uid=%u)(objectclass=person))
netscape.group.dn=ou=Groups, o=towers.com
netscape.group.filter=(&(cn=%g)(objectclass=groupofuniquenames))
netscape.membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquename
s))////////////////////////////////////////////////////////////////////////////
By looking at the error message, it seems like the "server.principal" and
"server.credential" info is not correct.
But I was able to use the same Netscape Directory server with Welogic5.1.0
with sp4, although the ldaprealm.properties file has somewhat different
format.
Did anyone have similar problems with sp8?
Thanks in advance for any suggestions. -
Not able to login into presentations server
Hi,
I have installed OBIEE in my local machine. As a part of report creation I have created an rpd file and changed the NQSConfig.ini file as mentioned in
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/bi_admin/biadmin.html.
Then I have re-started the OC4J server and all the OBIEE services. Then I open the Presentation Services, I am not able to log in. The error shown is
Error Codes: WH4KCFW6:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
+State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 12008] Unable to connect to port 9703 on machine . [nQSError: 12010] Communication error connecting to remote end point: address = ; port = 9703. [nQSError: 12002] Socket communication error at call=: (Number=-1) Unknown (HY000)+
I have checked the Log file (NQServer.log file in /OracleBI/Server/log folder). The Entries in the Log file are like this
2009-10-27 18:00:42
[36007] Loading repository C:\OBIEE\OracleBI\server\Repository\EventHub.rpd.
2009-10-27 18:00:42
[14055] Loading subject area: EventHub ...
2009-10-27 18:00:42
[14056] Finished loading subject area: EventHub.
2009-10-27 18:00:42
[43030] : Oracle BI Server started. Version: 10.1.3.4.1.090414.1900.
2009-10-29 14:09:42
[nQSError: 12002] Socket communication error at call=send: (Number=10038) An operation was attempted on something that is not a socket.
2009-10-29 14:29:23
[43031] : Oracle BI Server shutdown.
2009-10-29 14:29:26
[14058] Unloaded all subject areas.
2009-10-29 15:01:55
[36007] Loading repository C:\OBIEE\OracleBI\server\Repository\EventHub.rpd.
2009-10-29 15:01:55
[14055] Loading subject area: EventHub ...
2009-10-29 15:01:55
[14056] Finished loading subject area: EventHub.
2009-10-29 15:01:55
[43030] : Oracle BI Server started. Version: 10.1.3.4.1.090414.1900.
I have already gone through the forums which are already logged reporting the same error. But I dint get any pointers to the solution.
Please let me know what might have gone wrong and how I can login to the Presentation Server and continue with report creation. Please let me know if you need further information on this .
Thanks in advance for your time,
Raj KumarHi,
The following is the NQSConfig.ini file.
# NQSConfig.INI
# Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
# INI file parser rules are:
# If values are in literals, digits or _, they can be
# given as such. If values contain characters other than
# literals, digits or _, values must be given in quotes.
# Repository Section
# Repositories are defined as logical repository name - file name
# pairs. ODBC drivers use logical repository name defined in this
# section.
# All repositories must reside in OracleBI\server\Repository
# directory, where OracleBI is the directory in which the Oracle BI
# Server software is installed.
[ REPOSITORY ]
Star = EventHub.rpd, DEFAULT;
# Query Result Cache Section
[ CACHE ]
ENABLE = NO;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS = "C:\OBIEE\OracleBIData\cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
// Cluster-aware cache
// GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
// MAX_GLOBAL_CACHE_ENTRIES = 1000;
// CACHE_POLL_SECONDS = 300;
// CLUSTER_AWARE_CACHE_LOGGING = NO;
# General Section
# Contains general server default parameters, including localization
# and internationalization, temporary space and memory allocation,
# and other default parameters used to determine how data is returned
# from the server to a client.
[ GENERAL ]
// Localization/Internationalization parameters.
LOCALE = "English-usa";
SORT_ORDER_LOCALE = "English-usa";
SORT_TYPE = "binary";
// Case sensitivity should be set to match the remote
// target database.
CASE_SENSITIVE_CHARACTER_COMPARISON = OFF ;
// SQLServer65 sorts nulls first, whereas Oracle sorts
// nulls last. This ini file property should conform to
// that of the remote target database, if there is a
// single remote database. Otherwise, choose the order
// that matches the predominant database (i.e. on the
// basis of data volume, frequency of access, sort
// performance, network bandwidth).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh:mi:ss" ;
DATE_DISPLAY_FORMAT = "yyyy/mm/dd" ;
TIME_DISPLAY_FORMAT = "hh:mi:ss" ;
// Temporary space, memory, and resource allocation
// parameters.
// You may use KB, MB for memory size.
WORK_DIRECTORY_PATHS = "C:\OBIEE\OracleBIData\tmp";
SORT_MEMORY_SIZE = 4 MB ;
SORT_BUFFER_INCREMENT_SIZE = 256 KB ;
VIRTUAL_TABLE_PAGE_SIZE = 128 KB ;
// Analytics Server will return all month and day names as three
// letter abbreviations (e.g., "Jan", "Feb", "Sat", "Sun").
// To use complete names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO ; // default is no
// Aggregate Persistence defaults
// The prefix must be between 1 and 8 characters long
// and should not have any special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_" ;
# Security Section
# Legal value for DEFAULT_PRIVILEGES are:
# NONE READ
[ SECURITY ]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL = NO;
MINIMUM_PASSWORD_LENGTH = 0;
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; // default is no.
#SSL=NO;
#SSL_CERTIFICATE_FILE="servercert.pem";
#SSL_PRIVATE_KEY_FILE="serverkey.pem";
#SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
#SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
#SSL_VERIFY_PEER=NO;
#SSL_CA_CERTIFICATE_DIR="CACertDIR";
#SSL_CA_CERTIFICATE_FILE="CACertFile";
#SSL_TRUSTED_PEER_DNS="";
#SSL_CERT_VERIFICATION_DEPTH=9;
#SSL_CIPHER_LIST="";
# There are 3 types of authentication. The default is NQS
# You can select only one of them
#----- 1 -----
#AUTHENTICATION_TYPE = NQS; // optional and default
#----- 2 -----
#AUTHENTICATION_TYPE = DATABASE;
# [ DATABASE ]
# DATABASE = "some_data_base";
#----- 3 -----
#AUTHENTICATION_TYPE = BYPASS_NQS;
# Server Section
[ SERVER ]
SERVER_NAME = Oracle_BI_Server ;
READ_ONLY_MODE = NO; // default is "NO". That is, repositories can be edited online.
MAX_SESSION_LIMIT = 2000 ;
MAX_REQUEST_PER_SESSION_LIMIT = 500 ;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; // default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; // default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; // default is 20
CLIENT_MGMT_THREADS_MAX = 5; // default is 5
# The port number specified with RPC_SERVICE_OR_PORT will NOT be considered if
# a port number is specified in SERVER_HOSTNAME_OR_IP_ADDRESSES.
RPC_SERVICE_OR_PORT = 9703; // default is 9703
# If port is not specified with a host name or IP in the following option, the port
# number specified at RPC_SERVICE_OR_PORT will be considered.
# When port number is specified, it will override the one specified with
# RPC_SERVICE_OR_PORT.
SERVER_HOSTNAME_OR_IP_ADDRESSES = "ALLNICS"; # Example: "hostname" or "hostname":port
# or "IP1","IP2":port or
# "hostname":port,"IP":port2.
# Note: When this option is active,
# CLUSTER_PARTICIPANT should be set to NO.
ENABLE_DB_HINTS = YES; // default is yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = NO; # If this is set to "YES", comment out
# SERVER_HOSTNAME_OR_IP_ADDRESSES. No specific NIC support
# for the cluster participant yet.
// Following required if CLUSTER_PARTICIPANT = YES
#REPOSITORY_PUBLISHING_DIRECTORY = "<dirname>";
#REQUIRE_PUBLISHING_DIRECTORY = YES; // Don't join cluster if directory not accessible
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
# Dynamic Library Section
# The dynamic libraries specified in this section
# are categorized by the CLI they support.
[ DB_DYNAMIC_LIBRARY ]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
OCI7 = nqsdbgatewayoci7;
OCI8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
ESSBASE = nqsdbgatewayessbasecapi;
# User Log Section
# The user log NQQuery.log is kept in the server\log directory. It logs
# activity about queries when enabled for a user. Entries can be
# viewed using a text editor or the nQLogViewer executable.
[ USER_LOG ]
USER_LOG_FILE_SIZE = 10 MB; // default size
CODE_PAGE = "UTF8"; // ANSI, UTF8, 1252, etc.
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = NO;
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "<Database>"."<Connection Pool>" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
# Query Optimization Flags
[ OPTIMIZATION_FLAGS ]
STRONG_DATETIME_TYPE_CHECKING = ON ;
# CubeViews Section
[ CUBE_VIEWS ]
DISTINCT_COUNT_SUPPORTED = NO ;
STATISTICAL_FUNCTIONS_SUPPORTED = NO ;
USE_SCHEMA_NAME = YES ;
USE_SCHEMA_NAME_FROM_RPD = YES ;
DEFAULT_SCHEMA_NAME = "ORACLE";
CUBE_VIEWS_SCHEMA_NAME = "ORACLE";
LOG_FAILURES = YES ;
LOG_SUCCESS = NO ;
LOG_FILE_NAME = "C:\OBIEE\OracleBI\server\Log\CubeViews.Log";
# MDX Member Name Cache Section
# Cache subsystem for mapping between unique name and caption of
# members for all SAP/BW cubes in the repository.
[ MDX_MEMBER_CACHE ]
// The entry to indicate if the feature is enabled or not, by default it is NO since this only applies to SAP/BW cubes
ENABLE = NO ;
// The path to the location where cache will be persisted, only applied to a single location,
// the number at the end indicates the capacity of the storage. When the feature is enabled,
// administrator needs to replace the "<full directory path>" with a valid path,
// e.g. DATA_STORAGE_PATH = "C:\OracleBI\server\Data\Temp\Cache" 500 MB ;
DATA_STORAGE_PATH = "C:\OBIEE\OracleBIData\cache" 500 MB;
// Maximum disk space allowed for each user;
MAX_SIZE_PER_USER = 100 MB ;
// Maximum number of members in a level will be able to be persisted to disk
MAX_MEMBER_PER_LEVEL = 1000 ;
// Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB ;
# Oracle Dimension Export Section
[ ORA_DIM_EXPORT ]
USE_SCHEMA_NAME_FROM_RPD = YES ; # NO
DEFAULT_SCHEMA_NAME = "ORACLE";
ORA_DIM_SCHEMA_NAME = "ORACLE";
LOGGING = ON ; # OFF, DEBUG
LOG_FILE_NAME = "C:\OBIEE\OracleBI\server\Log\OraDimExp.Log";
One more thing is that I have kept the BI server (OC4J server) runnung.
Does the time of the error in NQSServer.log match with when you try to login to Presentation Services?
I donot see any error matching the time of loginto presentation services. -
Dispatcher stopped and not able to connect with sql server
Hi ,
In one of test system disp+work is started and then within no time its stopped.
I am able to connect with sql server 2005 database but while starting sap dispatcher is stopping.
Here is the log of dev_wo
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Jan 05 07:24:02 2012
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' ...
B Library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 11
M sid DE1
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 988
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 988) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 23936 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07F90040, size: 4659000)
M DpShMCreate: allocated sys_adm at 07F90040
M DpShMCreate: allocated wp_adm at 07F91E40
M DpShMCreate: allocated tm_adm_list at 07F97BC0
M DpShMCreate: allocated tm_adm at 07F97BF0
M DpShMCreate: allocated wp_ca_adm at 08366E90
M DpShMCreate: allocated appc_ca_adm at 0836CC50
M DpShMCreate: allocated comm_adm at 0836EB90
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 083EFA50
M DpShMCreate: allocated gw_adm at 083EFA90
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 083EFAC0
M DpShMCreate: allocated wall_adm at 083EFAC8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Jan 05 07:24:03 2012
M ThInit: running on host sugarland
M
M Thu Jan 05 07:24:04 2012
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SUGARLAND\DE1] <> Prof(dbs/mss/server) [SUGARLAND]. Profile value will be used.
C Thread ID:708
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\DE1\SYS\exe\uc\NTI386\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SUGARLAND
C CopyLocalParameters: dbuser is 'de1'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:24:19 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:24:34 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:24:49 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:25:05 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:25:21 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Thu Jan 05 07:25:37 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Jan 05 07:25:37 2012
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 988) [dpnttool.c 327]
Please help me on this
Thanks
SrikanthHi Amit,
I restarted the system but dispatcher still in same stage.
Here is the log for dev_w0
========================================
Fri Jan 06 03:41:06 2012
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 2, sev 0), Named Pipes Provider: Could not open a connection to SQL Server [2].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sugarland_DE1_11 on host sugarland (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Fri Jan 06 03:41:06 2012
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3632) [dpnttool.c 327] -
JMS adapter: JNDI not able to connect to TIBCO server.
Hi All,
We are facing a strange problem here related to JMS adapter. We are trying to connect to TIBCO using JMS adapter.
We have 3 different Business Services, all the three using JMS channels. All the JMS channels are connecting to the same server on same port 7222. We have every thing same in all the JMS channels except the Que Name and the queue/log on user.
All the channels under 1 particular services are working fine while under the other two are giving below error:
===========================================
Channel error occurred; detailed error description: com.sap.aii.adapter.jms.api.connector.ConnectorException: Error looking up connection factoryQueueConnectionFactory, for profile: ConnectionProfile of channel: <Interface name> on node: <server node> having object id:<Object ID>: javax.naming.ServiceUnavailableException: Failed to query JNDI: Failed to connect to any server at: tcp://<host1>:7222, tcp://<host2>:7222<br> at com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createConnectionFactory(JndiConnectorImpl.java:135)<br>
=============================================
Below are the basic JMS configuration:
1. QueueConnectionFactory
2. com.tibco.tibjms.naming.TibjmsInitialContextFactory
We are on PI 7.0 and working with both Sender and Receiver JMS adapters.
Looking for your help.
Regards,
RahulHI,
Please reply me for this question, or to the other one JNDI not able to connect . Both aer one and the other are same.
--Khaleel
Maybe you are looking for
-
Error in Adobe Captivate 4: "unable to decode and import the selected wav - mp3 file"
Good day! I have a problem. When i want to import music file from standart Gallery, i see the mistake: unable to decode and import the selected wav - mp3 file. I can't import mp3,wav files... In Adobe Help site i have found this: http://help.adobe.co
-
Adobe Reader will not work in my browser
Hello all- Unfortunately, I had to replace my hard drive recently. When I reinstalled everything and tried to get Reader to work in a browser, it would not. I am on a Windows 7 computer and have Acrobat Pro 9. I usually use Firefox. However, I've che
-
I am creating an XY graph and manipulating the colors of the plots, background, etc. I am saving this graph to JPEG using the Write JPEG File vi and after it is saved I import it inot a test report. This works fine in color, but when I create a B&W
-
MAX( ) function in 2 columns... Wrong Data
Hi Folks, I have A DDIC Table with mandt, Destination, Date, Time, KUNNR and some other columns. Now I want to determine the LATEST entry for a KUNNR. Now I did: SELECT mandt desti kunnr MAX( erdat ) MAX( ertim ) [..other nonkey fields.
-
How can I turn off the daily nagging about software updates?
How can I turn off the daily nagging about software updates? I am _very_ annoyed at having to answer this every day, day after day after day.