Not able to create a customer master record with US as the country code

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is *NO JURISDICTION CODE* COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
I have checked the field in the account group(OBD2) but tax code is in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message,
but when I tried checking the settings for a different company code's customer data base (us in county code)
I can see that there is a number mentioned in the address tab under tax jurisdiction field (beside time zone) which is not populating for this company code.
So, do anyone know where exactly we mention this number so that it populates in that field of address.
Hope am clear.
hope to receive a solution
thanks & regards
vinila

Hi,
You need to maintain the JURISDICTION CODE for country US. This JURISDICTION CODE code mainatanance purely FI/CO part.. it depends on the country's tax procedures.. Better take the help from your FI/CO consultant..
Menu path for Defining tax jurisdiction code
IMG -- Financial accounting -- Financial accounting global settings -- tax on sales and purchases -- basic settings -- define tax jurisdiction
reward if helps
Muthu
Edited by: Muthupandiyan on Mar 14, 2008 11:09 AM

Similar Messages

Create customer master record with reference

Hello guys,
I'm trying to create a customer master record with reference using XD01 (existing in the referent company code only) but no data are copied at the general level of the customer (not only the address data but also these contained in KNA1). Is there something I can do in order to get the referent data?
Thanks

Only data that does not refer directly to the customer/vendor is copied from the reference account to the new account, that is,no address information, and so on.

Create customer master record with reference to existing division

how to create customer master record with reference to existing division?

what type of reports sd consultant configure in implementation project?and in supporting project?

Is there a BAPI or Function module can create a Customer Master record?

Hi experts,
In SE37, Is there a BAPI or Function module can create a Customer Master record?
Regards

BAPI_CUSTOMER_CREATEFROMDATA1
also see this thread.
Re: Create customer record in SAP via BAPI
кu03B1ятu03B9к

Facing Problem in creation on Customer Master Record with reference

Dear SAP Experts,
I am making a New Customer master record with referenec to existing one. Account Group """ Stock Transfer - Depot""" do not use internal no assignment, we put external no to customer code. but when we enter the customer master with reference to existing one, system shows the error.....enter a no between A001 and Z999.
Customer Record Details-
Account Group - Stock Transfer Depot
Customer - 1101
Compnay Code- 1000
Sales Organisation - 1000
Distribution Channel -20
Division - 01
Reference:
Customer - 2001
Comapny Code - 2000
Sales Organisation - 2000
Distribution Channel - 20
Division - 01
Error: ENTER A NO BETWEEN A001 AND Z999
I m not getting why system showing this type of error, should i need to configure new customer code sumwhere in IMG if yes please let me know.
Lokking forward for your quick response on the same.
Regards
Parul Deshwal

Hi Parul Deshwal,
- The number range is created in XDN1.
- The number range is assigned to the account group "Stock Transfer - Depot" in SAP Customizing Implementation Guide>Financial Accounting>Accounts Receivable and Accounts Payable>Customer Accounts>Master Data>Preparations for Creating Customer Master Data>Assign Number Ranges to Customer Account Groups
Remember - If you are entering an external number it generally means the number is created in an external system and replicated to your system.
Help - Check what external number was used last by doing SE16 on table KNA1 and use the account group "Stock Transfer - Depot" as a selection parameter.
Best regards,
Glynn

I am currently in Cameroon, Africa and after arriving here, I added Global services to my plan in hopes to be able to use my phone to call local numbers. When I dial local numbers in Cameroon, with or without the country code, the call fails. I suspect

I am currently in Cameroon, Africa and after arriving here, I added Global services to my plan in hopes to be able to use my phone to call local numbers. When I dial local numbers in Cameroon, with or without the country code, the call fails. I suspect it may be that the phone is 3G and this area only supports 2G. Help!

cctga,
We appreciate you taking the time to reach out to us. I am sorry to hear that you are having trouble while traveling. We definitely want to make sure you have all available options. Normally when traveling internationally we reccommend setting up international services prior to leaving. When you added the services did you do so online or with a rep? It would be best to contact our global department in order to troubleshoot any and all issues with services while international http://vz.to/17KseUf.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

Not able to create rows in a table with dependent columns in an OAF page.

We have a table in an OAF page which has the property "Records Displayed" set as "10". Hence pagination kicks in for more than 10 rows in the table. "Add rows" is enabled in this table. The table also has 'detail' component.
In this table, we have created 2 new columns (dropdowns) using personalization. Dropdown 2 is dependent on the value selected in Dropdown1. Both are required fields.
We are able to add new rows to the table. All the columns render properly. Dropdown 2 also renders properly depending on the values selected in Dropdown1. There is no issue until we add the 10th row (remember the number of displayed records in the tabble is 10). When we add the 10th row, the fields appear properly. Dropdown1 values are displayed as expected. But when we select a value in Dropdown1, Dropdown2 does not refresh and get populated with the expected values (depending on Dropdown1 values). Dropdown2 remains blank. But this happens only when the 10th row is added. Since Dropdown2 is a required field and since Dropdown2 is not refreshed with values depending on Dropdown1, the records cannot be saved.
There seems to be a problem with refresh when the nth row is added to the table where 'n' is the Records displayed in the table (pagination).
If we change the Records Displayed to say 15 then we have the above problem when adding the 15th row. 14 rows can added to the table without an issue.
Can a workaround (other than increasing the number of displayed records) be provided for this issue?

Hi,
I suspect you have written a method having String return type but the method does not have return statement.
Go to the Catalogue component->BPM Object->Right click on the BPM object and select New Method->Give the method name. Now the method window will be opened. Go to the propertied tab of the right most panel. Set the return type as string. In the method window editor write your business logic. The below mentioned code is for sample one.
String msg = "Hello World";
return msg;
Bibhu

HT1491 I am not able to purchase more coins for matching with friends. The window says to contact iTunes support to complete my purchase. How do I do this?

iTunes is not letting me purchase coins for matching with friends. The message tells me to contact iTunes support to complete the transaction. How do I do this?

You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Account Group and partner functions in customer master records

Hi Gurus,
I need your help to confirm the following understand if correct:
1. To create customer master record for partner function Ship-To, need to create a customer master record using the uniquely assigned account group for Ship-To , that is, 0002 . In this ship-to master record, define in its partner function tab, the other partner functions related to it.
2. To create the above, it cannot be achieved by just assigning the partner functions in the partner function tab of SOLD-To customer master record , created using account group 0001.
Question:
1. How does the system know or allow what codes a user can select (f4) or enter manually when defining in customer master record's partner function tab, the partner functions and their respective codes?
How is this controlled? Is it by user authorization? or will user / sales administrator be able to select any codes tied to a partner function?
2. Lets say there are 2 partner functions : Sales employee VE and 9E called Sales Representative. Both of these partner functions are of Partner Type PE.
When defining in customer master record's partner function tab, how does the system know what codes is selectable for the administrator for each of these partner functions?
best regards
M Russo

hi russo,
this is to inform you that,
1. yes you are right.
2. you need to follow the steps as you said.
Question:
1. that you can find in the search basing on account group for partners. that assignment we should know russo which SH to be assigned to which SP. no need to have authorization for that, make a note of the list of SH and SP to be assigned that's all.
yes, he will able to select any SH from the list but make sure that we assign the correct SH to the list of SP.
2. that you will be defining it in Partner Determination Procedures. at the time of CMR creation you have to select the correct code that will get populated in sales order.
hope this clears your issue.
balajia

I am not able to create a new tab, eventhough i have tried all ways to do it.

Normally the existing (current) tab has at the end an "+", and that gives you the option to make a new tab to the right. My Firefox tab does not have the "+", and I'm not able to create a new tab for another link. The new tab option is not working on my Mozilla internet browser.

Use Hotkey CTRL + T to Open a Blank Tab. Do the following too:
go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check and tell if its working.

Not able to create customer master data with country code US

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
Request you to provide me with a solution.
Thanks & Regards
VK

Hey all,
I have checked the field in the account group(OBD2) but its in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
so, do anyone know where exaclty we mention this number so that it populates in that field of address.
hope am clear
hope to receive a solution
thanks & regards
vinila

Internal number not showing while creating customer master record

Dear All.
After creation of account group and doing patner determination procedure, while creating customer master record it is showing all the 4 functions of partner in partner function tab page but the internal number is not displaying. I have set number range internally.
Thanks..
CG Balaji

> Dear All.
>
> After creation of account group and doing patner
> determination procedure, while creating customer
> master record it is showing all the 4 functions of
> partner in partner function tab page but the internal
> number is not displaying. I have set number range
> internally.
>
> Thanks..
>
> CG Balaji
Hi,
In your partner determination procedure for Customer master, apart from assigning a Pratner proc to your A/c grp, you also need to maintain the combination of your a/c group with the partner functions that you have in your procedure.
On the left side panel, you have a link (i think 5th) saying Account group - Function assignment. In this, maintian the partner functions that you want to your a/c grp.
This will allow taking INTERNAL numbers during customer creation.
Thanks and reward points if useful

Automaticaly create customer master record

Hi, can you create customer master record from employee data (HR) like you do with RPRAPA00 for vendors?
Thanks

Hello Madhu, can you elaborate your affirmation? I can only find references for vendors in that program and I need CUSTOMER master data creation. The documentation you mention does not clarify this or any identical functionality for customers!
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b6/cd981949e911d189060000e8322f96/frameset.htm
Thanks again.
Sérgio.

Details regarding Create customer master record

Hi,
Can anyone gv info regarding Creating customer master record.
I need Existing Bapi's for the same.
Thanks in advance.
Purna

Check out the bapi:BAPI_CUSTOMER_CREATEFROMDATA1.
To know of how to use it, check its documentation, it is very well documented.
hi karthik, shaik can not reward points as he did not mark this as a question.
Regards
Gopi

Send SMS while creating Customer Master Record using XD01?

Hi Experts,
We have a requirement that " Send SMS from XD01 (customer Master)". Send SMS to customer's mobile after successfully creating customer master record by pressing SAVE button in XD01 tcode.
Successfully, sending SMS through the ABAP program.
How to send SMS from XD01 tcode? I tried using USER-EXIT "SAPMF02D", but it is not sending and giving error message. If I send through the program, it is sending and working fine.
Whether I have to use Work Flows or any other solutions?
Please help me out.
thanks in advance.
Regards
Saray.

Hi,
Can you please paste your code here?
Also check BADI CUSTOMER_ADD_DATA in se18.
Regards,
Amit

Not able to create a customer master record with US as the country code

Similar Messages

Maybe you are looking for