Not able to create a Task List for Charm Retrofit

Hi All,
we are trying to implement retrofit for our client. Created two projects one for implementation and one id maintenance and defined the system landscape for both.
I have checked the RFC connection for all the systems involved and all works fine. IMG projects are created successfully for both.
Problem comes when we are creating a maintanance cycle or task list after activating the change request management. We always get a logon screen after giving the name of task list and press ok. First we thought it could be the trusted RFC issue but trusted RFC for the current user is working fine.
Could anyone know what is the problem and if you faced the same issue pls share your experience what all did you try to rectify it.
Thanks
Tripti

Hi,
BC sets are active. I have already checked, it ended up in warning but its general we can avoid it. One thing which we found out was thi error when I am checking the application log for the project
System cancel RFC destination SM_GTDCLNT020_TMW, Call TMW_SET_PROJECT_SWITCHES: No authorization to change file /usr/sap/gttrans/a ctlog/GTDZP000XX.GTD
I don't understand what exactly is this error about but informed the authorization team regarding this.
Any idea?
Thanks,
Tripti

Similar Messages

Not able to create Schedule Task in OIM 9.1.0.2

Hi,
I created one Java program and created Jar file. Then placed in Schduled Task folder.
When I try to create one Schedule Task in OIM web console, I am not able to see the Class File name in the list.
Please let me know what could be the reason for this.
Thansk for your help.

In OIm Web console, there is one serach where we can serach the required class file. I am not able to see the class file in the list where as I am able to see other class files for other scheduled Tasks.
But I am not able to see my Class file.
When I try to paste the full class file path in Design Console, It gives an error saying No database read.
This is very urgent for me to create the scheduled Task.
Any idea??

Not able to create the purchase requisition for the subcontracting process

Dear Gurus,
There is a process order with the component which is to be handled in the subcontracting .Earlier we are able to create the purchase requsition with the creation of the process order .But recently I am not able to do so .I am getting the "The value of the field Reservation/Purchase requsition as Never" .I have checked with the settings in the procurement type in the MRP2 view of the material master which is "X" ,the validity of the outline agreement and contract which is OK.Can you please help on this.

Hi Venkata,
Check this links:
http://help.sap.com/saphelp_nw70/helpdata/EN/84/0cb892edfbc34290c1685132006662/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/58/54f9c1562d104c9465dabd816f3f24/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/f3/914f3445194d468f652d45494230b1/content.htm
Which database and OS is your BW server on? Not all of them are supported for SQL server
Hope this helps.
Regards,
Diego

I'm not able to create a security seal for Yahoo.

When I go to Yahoo.com, in order to log on, I must enter my user name and password. In order to insure that I'm truly on the Yahoo site, I'm asked to install a security seal. In attempting to create the seal, I continue to receive an error message.

Is that seal using cookies or is it created via other means?
*http://support.mozilla.com/kb/Cookies
*http://kb.mozillazine.org/Cookies

Not able to create new paragraph format for copied layout of WESCHEINVERS3

hi all,
Iam facing one of the pecular problem I copied WESCHEINVERS3 into Zlayout from client 000.
when i tried to create new paragraph format I found the create element greyed out I have never seen this issue earlier.
May I know why the menu path paragraph->EDIT->create element is greyed out.
thanks

Hi,
U can create new paragraph formats, windows, character formats etc., only in original language of the FORM.. I guess u were trying to create a new paragraph format in 'EN' but the original language of form 'WESCHEINVERS3' is 'DE', so u can create the new paragaraph format in the copied Z form only in DE language.
Try to open the Z FORM in DE and create the Paragraph format...
Hope it helps!!
Rgds,
Pavan

Not able to create EAR file for WAR file extracted project

Hi Experts,
I am trying to import a WAR file, make changes to the project and create an EAR file for the same. I am not able to remove import
errors despite of adding required jar files to it.
Also, I am not able to create an EAR file for the same.
I have copied the steps here with screen shots. Below are the steps :
Import WAR file in NWDS 7.3 – Enterprise Portal perspective
Select WAR file to create WAR and EAR project for it.
Project created with import errors. e.g – com.sapportals.portal.prt*
Found jar file from Class – target jar file table.
e.g – for Class com.sapportals.portal.prt.resource.IResource needed jar file is tc~epbc~prt~api.jar
Copied required jar files in WEB-INF -> lib folder.
Configure Build path and Add External jars.
Portalapp file screen shot
I think errors should go now, but they still exist.
Next I right click on WAR project and tried updating related EAR project.
Next, Export EAR file from EAR project.
I have tried both EAR types.
But EAR file is not created.
Please help me in removing the errors.
Thanks in advance :-)
Anubha Pandey

Hi Anubha,
I feel that you're missing JAR dependencies and hence not able to resolve the above import errors.
Please go through the below thread for the AFP Masthead customization and follow the same:
How to download and change AFP Masthead on SAP Portal 7.3
Hope, this will help!!!
BR,
Anurag

Error while creating configurable task list

Dear Expert,
I am trying to create configurable task list for equipments and I want to use this task list for preventive maintenance cycle. In following steps I will tell you what i did in the process.
Step1:- Characteristic is created and different values are assigned to this.
Step2:- Class with class type 300 is created, characteristic is assigned to this class
Step3:- Equipments are created and class created in above steps is assigned to them and character values are set for them
Step4:- General maintenance task list created
Step5:- Configuration profile for task list with same class is created
now while creating the object assignment in the task list operation, in the dependency basic data I am getting error ' No source code entered'. Please guide me what data do I need to enter in this basic data and where I am doing wrong.
I try to follow the previous discussion regarding the same topic, but unable to create this object dependency assignment.
Thanx in advance, for your help.
Regards,
Parag

Hi Parag,
See this document.Configurable Tasklist
I hope you will be able to connect and correct your process accordingly.
Step3 here (CU01) is related to your issue.
You are expected to give a code shown like that in the Editor above Assignments in the Tasklist Extras menu (Takes to CU01)
Jogeswara Rao K

Not able to create Follow up transaction since it has been grayed out

Hi Experts,
We have a scenario where in we will create the Sales Transactions (OR) in ECC and then it will replicates to CRM.
In CRM we wants to create Returns Order (RE) as a follow up Transaction to OR (which is replicated from ECC to CRM) .
When I tried to create Returns Order (RE) in CRM as a follow up document to Sales Transaction (OR), the follow up Transaction CRM Returns (RE) has been grayed out. I mean it is in display mode only.
And then I created Sales Transaction (OR) in CRM itself and then I tried to create follow up Returns Transaction (RE) I was able to create.
But I am not able to Create Returns Order (RE) for the Sales Transactions (OR) that have been replicated from ECC to CRM.
Can anybody help me in resolving this issue. Any help ful answer will be rewarded with points.
Thanks in advance,
-Frederick Johnson.

Hi Fredrick,
Please check, whether you have completed all the steps for Copying Control for Business Transactions in the following path in IMG:
SPRO->Customer Relationship Management->Transactions->Basic Settings->Copying Control for Business Transactions:
- Define Copying Control for Transaction Types
In this step, you define the control for copying business transaction types.
To do this, you enter a source tranaction type and a target transaction type, and define the corresponding conditions for this combination.
- Define Copying Control for Item Categories
In this step, you define the control for copying item categories.
To do so, you enter a source item category and a target item category, and define the corresponding conditions.
- Define Item Category Determination when Copying
In this step, you define a specific item category determination which should be run during copying. The item category is used to find the target item category in the source transaction for the transaction type in the target transaction. This means that the transaction type for the source transaction is not relevant for the item category determination.
If the system cannot find an entry for the copying transaction in this table, the item category is found in the target transaction using the normal item category determination.
This might help you
regards
Srikantan

I am not able to create a new tab, eventhough i have tried all ways to do it.

Normally the existing (current) tab has at the end an "+", and that gives you the option to make a new tab to the right. My Firefox tab does not have the "+", and I'm not able to create a new tab for another link. The new tab option is not working on my Mozilla internet browser.

Use Hotkey CTRL + T to Open a Blank Tab. Do the following too:
go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check and tell if its working.

Inbound document not able to created from an outbound message EDI

Dear all,
Our inbound delivery was not able to create automatically during GI for an outbound delivery. Our inbound delivery is created via an EDI output type in the header of the outbound delivery as soon as the GI is posted.
All along, all the inbound docs are able to generate. However, for this particular outbound document, which has already GI, does not trigger the inbound document creation, and I notice that the output type message having a red light status in the message output.
When I checked the error processing log on this output message type (i.e. the red status), error message said
No goods receiving point for the combination of plant 1120 and stor.loc.
Message no. VL377
Diagnosis
No goods receiving point could be found for plant 1120 and storage location for the inbound delivery item. The delivery should still take place for the goods receiving point .
System Response
The system does not permit creation of and/or changes to the inbound delivery item.
Procedure for System Administration
Check your settings in Customizing for Determining the goods receiving point.
The funny thing is I check the SPRO setup (i.e. Assign Goods Receiving Points for Inbound Deliveries), and I notice that the goods receipt point has been assigned and configured. Further, other Delivery Order which is having the same data, does not generate such error in the message output, and the inbound is able to create.
WHy?
thanks.
Edited by: tuffy on May 12, 2011 12:04 PM

Hi Sudhir,
This is a production thus, I don't want to save the inbound delivery, but it seem no problem of creating it, I will have the business create it.
So, how do i debug the idoc?
at first how do I find the idoc number of the failed transaction as when i go to the output message (i.e. in DO header) and check the processing log, system said..
Object 0082658402 (i.e. DO number)
output type: Stk Transfe Crte Deliv
Processing log for program /spe/sto_id_processing
no goods receiving point for the combination of plant 1120 and stor loc
no inbound delivery create for the replenishment order
There is IDOC no for this faild message (though GI is incurs)?
thanks.

Not able to create new folder in list/library sharepoint 2013 foundation

I am not able to create new folder in library and also not able to edit existing list item
Below is the error:
Getting Error Message for Exception
System.Web.HttpUnhandledException (0x80004005): Exception of type
'System.Web.HttpUnhandledException' was thrown. --->
System.NullReferenceException: Object reference not set to an
instance of an object. at
Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureList()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureListAndFor
m() at
Microsoft.SharePoint.WebPartPages.ListFormWebPart.UseLegacyForm()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.CreateChildCont
rols() at System.Web.UI.Control.EnsureChildControls() at
Microsoft.SharePoint.WebPartPages.WebPart.get_WebPartMenu() at Mi
crosoft.SharePoint.WebPartPages.ListFormWebPart.CreateWebPartMenu()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.OnLoad(Ev...
Please help.It happens only on few sub sites

Hi V_K04,
You said that it happened only on few sub sites, whether this issue occurred on some subsites, and some subsite worked well.
Please check whether there are some differences between the subsites that worked well and the problematic subsites.
Whether this issue occurred on all libraries and lists on problematic subsites.
Whether there are some customizations in these problematic libraries and lists.
Please create a new library and a new list, test again, compare the result.
BestRegards,
Wendy
Wendy Li
TechNet Community Support

Not able to see published task and not able to reset version for the task

Hi,
Created a task ,validated,by selecting the task clicked Publish button in tools to publish the task.
In Client Application(Callcenter) navigated Administration-Business Process->Task Deployment
Here not able to see published task to activate.
Tried twice by copying record but not able to see.
I am not able to reset version for the task created.
Could you please let me know how to overcome these.
Using sample database of siebel8.0.0.5
Thank you

Hi Dude,
To trobleshoot this you need to do the following steps:
1) cross check in tools the srf which you are compling , the same srf should be used by the clent application i.e. call center
2) the secound thing is in the Siebel tools there is a toolbar at the top, from where you have published the task, there beside you will find a button called Revise you can revise you task, first select task and click revise button.
3) and also you remember a task which you create is validated by right clicking the task record and choose validate.
4) remember, a task which you create should be registered same as like responsibilities, by navigating to Administration-Applicatrion > Task
Register the task with same name as you have used in Siebel Tools.
As, for best practices after creating a task first validate it, then after register it in Administration-Applicatrion > Task , then after toolbar there is a button callled publish and activate click that one .
and that's All.
Regards,
Neeraj Verma

Not able to create new e-mail on N8 using Mail for...

Not able to create new e-mail on N8 using Mail for Exchange.
Currently using google for my domain, but settings are the same as explained on the google Sync webpage: http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=147951
When creating reply on mail the application crashes. When creating new mail it says "Kan bewerking niet uitvoeren" in english: "Unable to execute action".
Any idea why creating mail is not possible?
Regards,
Joris

problem is known
more info there:
/t5/Nseries-and-S60-Smartphones/N8-syncing-with-Google-contacts-amp-calendar/td-p/772020
there is little workaround aslo.

Not able to create index for organization

in transaction ses_admin, i created an index for business object BAS_BUPA of type 1,ie individual account.
However, i am not able to create index for BAS_BUPA of type 2
It says "No entry in table SIC_INDEX_MAIN for index object BAS_BUPA and index 2"

hi,
The index is for Business Partner, so it includes both Persons and Organizations. So, only one index needs to be created for both.
The functioning is correct, just that i missed it.

I moved from the UK to Sweden. My trial expired in the UK but I was not able to purchase CC in Sweden for some reason. I was told to create a new account in Sweden with a new Adobe ID. When I did, the trial downloads did not work and I could not purchase

I moved from the UK to Sweden. My trial expired in the UK but I was not able to purchase CC in Sweden for some reason. I was told to create a new account in Sweden with a new Adobe ID. When I did, the trial downloads did not work and I could not purchase the CC at discount price.

Moving this discussion to the Adobe Creative Cloud forum.
Kriskristferson if you are facing difficulties with your order then please contact our support team directly at Contact Customer Care.

Not able to create a Task List for Charm Retrofit

Similar Messages

Maybe you are looking for