Not able to create customer master data with country code US

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
Request you to provide me with a solution.
Thanks & Regards
VK

Hey all,
I have checked the field in the account group(OBD2) but its in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
so, do anyone know where exaclty we mention this number so that it populates in that field of address.
hope am clear
hope to receive  a solution
thanks & regards
vinila

Similar Messages

  • Steps to create customized Master  data infoobjects in BI 7

    Hi all,
    Can anyone please send the detailed steps to create customized master data infoobject in BI7,and also the data is to be extracted from two different datasources from two different source systems.
    Regards,
    G.Monica Roja Flora.

    Some data modelling tips while creating master data infoobject and extracting data from different source systems -
    If there are identical characteristic values describing different objects for the same characteristic in various source systems, you have to convert the values in such a way in SAP BW so as to make them unique.
    For example, the same customer number may describe different customers in different source systems.
    You can carry out conversion in the transfer rules for this source system or in the transfer routine for the characteristic.
    If work involved in conversion is too great, you can compound the characteristic to the InfoObject Source System ID (0SOURSYSTEM). This means it is automatically filled with master data. The Source System ID is a 2-character identifier for a source system or a group of source systems in BW. The source system ID is updated with the ID of the source systems that provides the data. Assigning the same ID to more than one source system creates a group of source systems. The master data is unique within each group of source systems.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6399e07211d2acb80000e829fbfe/content.htm
    Hope it Helps
    Chetan
    @CP..

  • How to create customer master data for walking customer in retail

    hi experts !!!!!!
    for retail industry e.g books trading industry
    how to create customer master data for walking customer in retail
    its dummy or one time customer
    if i create one time customer then same customer number can i use for every new order and every new customer how ?????
    thanks

    Dear Hanumant,
    As per my view,,
    You can use one time customer functionality to full fill your requirement.
    When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
    Same one time customer number you can use for every new order through maintaining different data.
    I hope this will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

  • Not able to create a material document with movement type 103

    I am not able to create a material document with movement type 103,
    The system is populating the value as 101 .
    How do I create a matdoc with movement type 103?

    What is the error you receive? Please specify with message number.
    On MIGO, you need to change the default value mvmt type value to 103 before you enter the PO number to be able to do 103.
    Once this defualt value is set, you can enter the PO and item number in the document number fields and proceed with 103.
    But you cannot change the mvmt type for already entered items from 101-103 or vice versa.
    I think the 101-103 and 103-101 mvmt type conversion message is standard error message

  • Create customer master record with reference to existing division

    how to create customer master record with reference to existing division?

    what type of reports sd consultant configure in implementation project?and in supporting project?

  • Error while creating customer master data

    dear sir,
    i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
      again while creating one with same name showing error while maintaing sales level data
    Check: Table KNA1 does not exist, table KNVI does
    Message no. F2061
    plz help how do i rectify this problem and maintain the same cutomer no (external) again.
    regards,
    Debesh

    Hi,
    you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
    XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
    Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
    If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
    regards
    Vivek.
    Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM

  • Create customer master record with reference

    Hello guys,
    I'm trying to create a customer master record with reference using XD01 (existing in the referent company code only) but no data are copied at the general level of the customer (not only the address data but also these contained in KNA1). Is there something I can do in order to get the referent data?
    Thanks

    Only data that does not refer directly to the customer/vendor is copied from the reference account to the new account, that is,no address information, and so on.

  • Create Material Master Data with BAPI

    Hi,
    I don't know using of BAPI. I want using BAPI_MATERIAL_SAVEDATA bapi for creating material master data for Basic Data1, Basic Data2, Purchasing and MRP views. Does anybody can help me ?
    Thank you
    Good night

    Hi,
    Please refer to the documentation below:
    BAPI_MATERIAL_SAVEDATA
    Short Text
    Create and Change Article Master Data
    Functionality
    You use this method to create new material master data or to change existing material master data. The data on a material can be transferred for each call.
    When creating material master data, you must transfer the material number, the material type, and the industry sector to the method. You must also enter a material description and its language.
    When changing material master data, you need enter only the material number.
    In the header data, you must select at least one view for which data is to be created. Depending on the view selected, you must maintain other required parameters. If you do not enter values for all of the required parameters, the method is ended with an error message.
    The corresponding fields in the tables (such as CLIENTDATA) must first be supplied with data by the calling program. An indicator must also be set for each of these fields so that the data is written to the database by the method. This requires the calling program to supply the corresponding field with the indicator in a checkbox table (for example, CLIENTDATAX). Checkbox tables exist for tables that do not contain any language-dependent texts (MAKT, MLTX), International Article Numbers (MEAN), or tax classifications (MLAN). Several data records for a material can be created in these tables.
    If a structure contains fields for units of measurement (such as structure CLIENTDATA, field BASE_UOM), language indicators (such as structure MATERIALDESCRIPTION, field LANGU), or country indicators (such as structure TAXCLASSIFICATIONS, field DEPCOUNTRY), there is always a field of the same name with the ending _ISO. This makes it possible to transfer either the internally used SAP code or a standardized ISO code for the units of measurement, language indicators, or country indicators. ISO codes are converted to an SAP code internally for further processing. The ISO code is used only if the SAP code is not transferred. If you use ISO codes, there must be a unique assignment of the ISO code to the SAP code in the following activities in Customizing for Global Parameters:
    Check Units of Measurement
    Define Countries
    If you want to maintain long texts (basic data texts, internal comments, purchase order texts, material memos, or sales texts) or customer-defined fields for a material, some special conditions have to be observed. They are described in the documentation for parameters MATERIALLONGTEXT and EXTENSIONIN.
    Parameters
    HEADDATA
    CLIENTDATA
    CLIENTDATAX
    PLANTDATA
    PLANTDATAX
    FORECASTPARAMETERS
    FORECASTPARAMETERSX
    PLANNINGDATA
    PLANNINGDATAX
    STORAGELOCATIONDATA
    STORAGELOCATIONDATAX
    VALUATIONDATA
    VALUATIONDATAX
    WAREHOUSENUMBERDATA
    WAREHOUSENUMBERDATAX
    SALESDATA
    SALESDATAX
    STORAGETYPEDATA
    STORAGETYPEDATAX
    FLAG_ONLINE
    FLAG_CAD_CALL
    NO_DEQUEUE
    NO_ROLLBACK_WORK
    RETURN
    MATERIALDESCRIPTION
    UNITSOFMEASURE
    UNITSOFMEASUREX
    INTERNATIONALARTNOS
    MATERIALLONGTEXT
    TAXCLASSIFICATIONS
    RETURNMESSAGES
    PRTDATA
    PRTDATAX
    EXTENSIONIN
    EXTENSIONINX
    Exceptions
    Function Group
    1001UEB
    Thanks,
    Sandeep.

  • Dump while creating customer master data

    Hi,
    I am trying to create customer master record using XD01.  I am getting express document error:
    "Acct group Sold-to party uses ext. no. assignment. Specify an account number"
    I have maintained the external number range from 000000... to ZZZZZZ.... and have also maintained account group.
    Below are the error details:                                                                               
    "MESSAGE_TYPE_X" " "                                                                               
    "SAPLSZA0" or "LSZA0U47"                                                                     
        "ADDR_SAVE_INTERN"     
    Source Code Extract                                                                               
    Line
    SourceCde                                                                               
    523
           call function 'TR_WRITE_LOG'                                                         
      524
             exporting                                                                               
    525
               iv_log_type             = 'FILE'                                                 
      526
              iv_logname_file         = lv_logfile                                              
      527
          IV_LOGNAME_DB           =                                                          
      528
           iv_logname_memory       = lv_protfile                                             
      529
               iv_append_mode          = prot_append_mode                                       
      530
               iv_condense             = ' '                                                    
      531
             tables                                                                               
    532
               it_msgs                 = msg_tab                                                
      533
             exceptions                                                                               
    534
               invalid_input           = 1                                                      
      535
               file_access_error       = 2                                                      
      536
               db_access_error         = 3                                                      
      537
               others                  = 4                                                      
      538
    539
           if sy-subrc <> 0.                                                                    
      540
             message id sy-msgid type sy-msgty number sy-msgno                                  
      541
                     with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.                                  
      542
           endif.                                                                               
    543
                                                                                    544
                                                                                    545
           message x842 with '&1' raising database_error.                                       
      546
                                                                                    547
         endif.                                                                               
    548
    Ende Fangschaltung -
      549
    *xxxi-                                                                               
    550
       END-OF-DEFINITION.                                                                       
      551
                                                                                    552
                                                                                    >>>>>
       write_to_db  adrc   .                                                                    
      554
    WRITE_TO_DB  ADRCT  .                                     "*912d                         
      555
       DELETE adrct FROM TABLE adrct_d.                          "*912i                         
      556
       IF sy-subrc <> 0.                                         "*912i                         
      557
         MESSAGE a840 WITH 'ADRCT' RAISING database_error.       "*912i                         
      558
       ENDIF.                                                    "*912i                         
      559
       UPDATE adrct FROM TABLE adrct_u.                          "*912i                         
      560
       IF sy-subrc <> 0.                                         "*912i                         
      561
         MESSAGE a841 WITH 'ADRCT' RAISING database_error.       "*912i                         
      562
       ENDIF.                                                    "*912i                         
      563
       MODIFY adrct FROM TABLE adrct_i.                          "*912i                         
      564
       IF sy-subrc <> 0.                                         "*912i                         
      565
         MESSAGE a842 WITH 'ADRCT' RAISING database_error.       "*912i                         
      566
       ENDIF.                                                    "*912i                         
      567
       write_to_db  adrp   .                                                                    
      568
       write_to_db  adcp   .                                                                    
      569
       write_to_db  adrt   .                                                                    
      570
       write_to_db  adr2   .                                                                    
      571
       write_to_db  adr3   .                                                                    
      572
       write_to_db  adr4   .                                                                    
    I will reward all the helpful answers.
    Thanks,
    Mohit.

    Hi Farhan,
    All the info you need is available in note 956054. This contains info on the customizing settings, etc.
    The role that you need to maintain is also a part of the customizing setup that is covered within the note.
    Hope this helps you.
    Cheers,
    Rishu.

  • Internal number not showing while creating customer master record

    Dear All.
    After creation of account group and doing patner determination procedure, while creating customer master record it is showing all the 4 functions of partner in partner function tab page but the internal number is  not displaying. I have set number range internally.
    Thanks..
    CG Balaji

    > Dear All.
    >
    > After creation of account group and doing patner
    > determination procedure, while creating customer
    > master record it is showing all the 4 functions of
    > partner in partner function tab page but the internal
    > number is  not displaying. I have set number range
    > internally.
    >
    > Thanks..
    >
    > CG Balaji
    Hi,
    In your partner determination procedure for Customer master, apart from assigning a Pratner proc to your A/c grp, you also need to maintain the combination of your a/c group with the partner functions that you have in your procedure.
    On the left side panel, you have a link (i think 5th) saying Account group - Function assignment. In this, maintian the partner functions that you want to your a/c grp.
    This will allow taking INTERNAL numbers during customer creation.
    Thanks and reward points if useful

  • Not able to Create TABLESPACE PSAPROLL|PSAPUNDO    with 728 MB

    Hi Experts,
                   When i an trying to upgrade PI 7.0 to pi 7.1 with EHP1 in checks roadmap in abap it throws error like
    ERROR> Insufficient free space in the database as follows:
    Create TABLESPACE PSAPROLL|PSAPUNDO    with 728 MB
    INFO> To adjust the size of your tablespaces, you may use the commands
          in file '/oracle/stage/upg/abap/log/ORATBSXT.LST' using the 'brspace' utility.
          Please copy the file before making changes, as it may be
          overwritten in subsequent upgrade phases.
    In the location
    '/oracle/stage/upg/abap/log/ORATBSXT.LST
    These are examples for brspace commands to extend/create the required
    tablespaces. You can adapt them according to your own needs.
    Add option '-c force' to call the commands in batch mode.
    Change option '-autoextend' to 'yes' and set '-maxsize' and '-incrsize'
    to create autoextensible segments.
    brspace -function tscreate -tablespace PSAPROLL|PSAPUNDO -owner SAPSR3 -size 728 -autoe
    xtend no
    info while creating : PSAPUNDO: Command not found.
    with the help of this above command i am not able to create the tablespace.
    My Existing tabelspaces are
    PSAPSR3
    PSAPSR3700
    PSAPSR3DB
    PSAPSR3USR
    PSAPTEMP
    PSAPUNDO1
    SYSAUX
    SYSTEM
    Plz help me on this ASAP.
    Thanks,
    Hari

    Your real problem is that PSAPUNDO does not exist. For an unknown reason you are using PSAPUNDO1. so, you must fix this:
    shutdown your DB.
    rename tablespace PSAPUNDO1 to PSAPUNDO. this can be done with:
    brspace -c force -f tsalter -a rename -t PSAPUNDO1 -n PSAPUNDO
    you will also need to change parameter undo_tablespace to PSAPUNDO
    if using initSID.ora, change this manually. or else, do this:
    alter system set undo_tablespace=PSAPUNDO scope=both;
    you might need to restart your database.
    good luck.

  • Not able to load text master data for customer infoobject

    Hi Guys,
    I am not able  load master data text to the customer infoobject.
    I have a infoobject-A which is loaded with 1000 records, out of which only 100 records are with text and remaining are without text.
    I have run a repair full request(extraction from ECC) and
    i can see data till PSA(the 100 records which are with text are no more available in ECC now).remaining 900 records are available with text till PSA but not updating to target infoobject.
    I have 3.X flow and i have checked transfer rules update rules and tried everythign from side-but no use-still not not working.
    Please post your suggestions.
    Thanks in advance
    Regards,
    Siva

    Hi Ramanjaneyulu,
    Transferrules screen shot:-
    update rules
    Regards,
    Siva

  • I'm not able to create a iphoto calendar with the correct birthday entries.

    Hello,
    I use the latest Iphoto version and OS X 10.9.
    I tried to create a calendar in iphoto that includes all birthday information of my family. Unfortunately I'm not able to do this.
    I tried two differnt ways to get the information into the calendar.
    First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
    Therefore I have to get the information into the calendar in a different way. For that I created a new calendar in ICal and created for each Birthday entries.
    I select the option in the Iphoto calendar to show the new calendar in iPhoto. But the result was worse than with the first solution. Only few entries was shown in the calender.
    Do anybody have an idea how can I solve this issue.
    Thank you in advanced,
    Philipp

    First of all I' tried to use the option of the calendar to get the information of my contacts and it partly worked. Some dates were missing and I was not able to modify or add additional birthdays in the calendar. I checked my contacts and the information was there but not shown in the Iphoto Calendar.
    Do the birthdays (from Contacts) show correctly in the Calendar app? Sometimes there is a formatting problem with the date string in the Contacts. If the Birthdays do not show correctly in the Calendar.app, try to delete them from Contacs and enter them again, and check, if they now are showing correctly in Calendar. Quit both Contacts and Calendar.
    Then restart iPhoto, and in the "Settings" for your Photo Calendar disable the Birthdays option, and then turn it on again.
    Any changes you do to the birthdays in Contacts may only appear in iPhoto Calendars after Calendar or Contacts wrote their databases, and iPhoto will read these databases, when you enable the "Birthdays" option. Toggling this option on and off will ensure, that the new Contacs info will be read.
    -- Léonie

  • Not able to create a web project with jsf or jsp or struts or spring

    Hi,
    I am trying to create a dynamic web project with jsf or jstl or struts or spring or any of web options available for a web project, but I am not able to do it.
    When I choose any of these options, the wizard asks me to "select an existing jstl/jsf/Spring 2.0 library, or click Add to add a new library." and since it doesn't show any existing libraries there, I clicked on add new library. When I click add, it opens a new dialog box where it has two options :
    1. to use spring/jstl/jsf lib from bea web site - when I choose this option, it tries to connect to the bea web site and gives me error that "connect time out". I don't know why it is not able to connect to the internet. I am not able to see the help also. There it gives error "The requested URL could not be retrieved".
    2. to use libraries from an existing spring installation - I provide the path of a directory where spring lib are, but then it gives me error that this is not a valid installation.
    On another machine, I am able to see the help contents, but still not able to get these libraries from the bea site.
    Please help.
    Thanks in advance,
    Sushma

    Hi Sushma,
    The issue you are facing has been addressed and will be part of the next release. For the current release, please follow the steps listed below.
    Send an email to [email protected] with details on specific facets you are trying to enable on your project.
    You will be provided with a url where you can download the required jars and details on how to manually add the jars to the workspace which will prevent the download on demand scenario.
    Cheers
    Raj

  • Need to Create Customer Master Data under Multiple Sales Areas

    Hi Gurus,
             My requirement is to create a customer under multiple sales areas by processing the Inbound Idoc function module "IDOC_INPUT_DEBITOR"( After generating Outbound Idoc and outbound is processed successfully).
             But, when I am trying to send the multiple sales areas information in segment "E1KNVVM". It is creating the customer under first sales area filled in first E1KNVVM segment and it is giving error that "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1" and it is not creating the customer under other sales areas.
            Following are the details of the Outbound Idoc which I have processed.
            Idoc Basic type : DEBMAS06
            Message          : DEBMAS
            I have filled required fields in E1KNA1M and E1KNVVM segments. But filled E1KNVVM segments  twice with different sales area data.
          Please help in solving this problem?

    is it really just one IDOC?
    I have never seen that SAP just does a part of one IDOC.
    the structure of DEBMAS ist like this:
    E1KNA1M
    --E1KNVVM
    E1KNVPM
    E1KNVDM
    E1KNVIM
    --E1KNB1M
    which means for your example it should be like this
    E1KNA1M
    --E1KNVVM
    E1KNVPM
    E1KNVDM
    E1KNVIM
    --E1KNVVM
    E1KNVPM
    E1KNVDM
    E1KNVIM
    --E1KNB1M
    and in this case I am very certain that it would never just process and create the part for one sales area.
    Maybe your customer already exists from ealier tests with just one sales area.
    Display your IDOC in WE02 or WE05 and make sure you have a value in name1 field

Maybe you are looking for