Not able to create Follow up transaction since it has been grayed out
Hi Experts,
We have a scenario where in we will create the Sales Transactions (OR) in ECC and then it will replicates to CRM.
In CRM we wants to create Returns Order (RE) as a follow up Transaction to OR (which is replicated from ECC to CRM) .
When I tried to create Returns Order (RE) in CRM as a follow up document to Sales Transaction (OR), the follow up Transaction CRM Returns (RE) has been grayed out. I mean it is in display mode only.
And then I created Sales Transaction (OR) in CRM itself and then I tried to create follow up Returns Transaction (RE) I was able to create.
But I am not able to Create Returns Order (RE) for the Sales Transactions (OR) that have been replicated from ECC to CRM.
Can anybody help me in resolving this issue. Any help ful answer will be rewarded with points.
Thanks in advance,
-Frederick Johnson.
Hi Fredrick,
Please check, whether you have completed all the steps for Copying Control for Business Transactions in the following path in IMG:
SPRO->Customer Relationship Management->Transactions->Basic Settings->Copying Control for Business Transactions:
- Define Copying Control for Transaction Types
In this step, you define the control for copying business transaction types.
To do this, you enter a source tranaction type and a target transaction type, and define the corresponding conditions for this combination.
- Define Copying Control for Item Categories
In this step, you define the control for copying item categories.
To do so, you enter a source item category and a target item category, and define the corresponding conditions.
- Define Item Category Determination when Copying
In this step, you define a specific item category determination which should be run during copying. The item category is used to find the target item category in the source transaction for the transaction type in the target transaction. This means that the transaction type for the source transaction is not relevant for the item category determination.
If the system cannot find an entry for the copying transaction in this table, the item category is found in the target transaction using the normal item category determination.
This might help you
regards
Srikantan
Similar Messages
-
Not able to save photos on iPhone 5, which has been taken by iPhone 5 camera.
Not able to save photos on iPhone 5, which has been taken by iPhone 5 camera.
Hi, I have a 32 gb I phone 5 which has 25GB space remaining and I tried doing a reset but the photos still keep disappearing. Advise another solution...............
-
I purchased a rental and it did not load all the way andI was never able to watch it. Since I can't ever get anyone on the phone, does anyone have any idea how to either get credit or be able to try i again without getting charged?
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
Service Ticket : Create Follow-Up Transaction
Hi everybody,
I'm facing a problem in creating a follow up transaction in Interaction Center Web UI.
I'm working with Service Tickets, I made the customizing for the copy control to Service Order, and I'm able to create follow-up transaction from SAP GUI. But on IC Web UI , when I click on Create Follow-Up button on Service Ticket's view , I get an info message that tells me the operation has been created, that's non true!
Please help, thanks in advance,
Paolo F.C.Hi Sreekanth,
thank you very much for your reply!
I'm still not able to produce the follow up Service Order from Service Tiket, I don't see it in the Business Context.
But you helped me anyway, because there I saw the Interaction Record , I tried to create a follow up Service
Order from it, and it works!
So probably I made some mistake in customizing, I'll try to compare the copy control of Interaction Record
the one for Service Tiket to underdstand.
So the question is not answered yet, but I'll give you some points 'cause you helped me!
Greetings,
Paolo F.C. -
Not able to create function in ALBPM Studio 6.0
Hi,
I am trying to write a method that returns a string.
But i keep on getting an error which says that return statement can only be present in functions.
Now I tried all possible ways but i was not able to create a function.
Could anyone please help me out with creating a function in ALBPM. else tell me how do i return a string from a method.Hi,
I suspect you have written a method having String return type but the method does not have return statement.
Go to the Catalogue component->BPM Object->Right click on the BPM object and select New Method->Give the method name. Now the method window will be opened. Go to the propertied tab of the right most panel. Set the return type as string. In the method window editor write your business logic. The below mentioned code is for sample one.
String msg = "Hello World";
return msg;
Bibhu -
Not able to create a universe when using nav. att. 0MATL_TYPE in the query
Dear experts,
A few days ago I posted a message in the BO General Category due to this error and I was adviced to install SP19 in BW (3.5). We've allready installed it but the issue is still arising. I am posting this thread now in this category since maybe the other category was too general and this one a little bit more specified.
The error we are having is the following:
We are having an issue when trying to create a universe over a BEx query which uses navigational attribute 0MATL_TYPE of 0MATERIAL (0MATERIAL__0MATL_TYPE).
No matter where do we insert this nav. attribute in the query (lines, columns, free characteristics...) that we are not able to create the universe. We receive a message when trying to create it such as "error without message"
We have other navigational attributes from several characteristics which are not giving us any problems in universes, just nav attributes 0MATL_TYPE and a Z characteristic (ZMATPR) which is the same as 0MATL_TYPE (it is defined the same way, not related).
We are working with:
BW 3.5 - SP19, BEx 3.x
BOBJ XI 3.0 (without service pack or fix pack)
Does any one have any clue on what could be the reason for this issue??
Thanks in advance for your interest!
Best regards!!!!
CeciliaHello Ingo,
First of all thanks for your help, since we are really concerned about this issue.
We have been analysing the file you have talked us about. The thing is that a week and a half ago we had to write an OSS message to SAP concerning another issue, and we were recommended to install note 1260004 which involves editing the registry in order to show SOFA logs, and if we have understood correcty, the file you have given us modifies as well the server registry in order to show sofa logs.
Does the file you have given us includes new information in the SOFA logs, what is the difference between what we have changed with the SAP note and what you have given us?
Nevertheless, we have retrieved two logs from two executions (having navigational attribute 0MATL_TYPE in the query from which we want to create the universe) in case you could help us to interpret the informations given since we are not able to understand it. (You can seen them below my signature.....haven't find a way to attach files....sorry....)
Thank's very much in advance for your help!!!! This is so disconcerting.......
Best regards!
No way , I cannot copy the logs since the message format is destroyed when I copy it..... If you need it please inform me and we will send it to you!
Thanks again for the help!!!
Cecilia
Edited by: Cecilia Guerra on May 11, 2009 1:56 PM
Edited by: Cecilia Guerra on May 11, 2009 2:09 PM -
Not able to create sales order using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
Hi Experts,
I am not able to create sales order . I am using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
to create sales order .I am passing external sales order number to the parameter
SALESDOCUMENTIN.
I am getting following error.
"524 |Only quantity 1 EA is allowed (Item 00001"
Here EA is UOM(Unit of measurement).
Below is the sample program through which i am trying to create the sales order.
*& Report ZSDC_SALES_TEST
report zsdc_sales_test.
*DATA: wa_bapi_header TYPE bapisdhd1.
Include Name - ZSDC_SALES_ORD_UPLOAD_TOP
Program Name - ZSDC_SALES_ORD_UPLOAD_1393
Program Title - Include for Data Declaration and selection screen
Created by - Lalitha W
Created on - 18-Nov-2008
Object ID - SD_C_1393_SALES_ORDER_UPLOAD
Request Id - SD3K905579
Description - This is a common INCLUDE for data declarations and
*selection screen details.
HISTORY
Date |Developer |Req by | Description |Reference ID
| | | |
| | | |
TYPE-POOLS
*TYPE-POOLS: truxs, abap, slis.
TABLES
*TABLES: t100.
TYPES
types:begin of ty_header,
auart(4) type c, " Sales Order Type
vkorg(4) type c, " Sales Organization
vtweg(2) type c, " Distrubution Channel
spart(2) type c, " Division
kunnr_1(10) type c, " Sold to Party
kunnr_2(10) type c, " Ship to Party
augru(3) type c, " Order Reason
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
ketdat(10) type c, " Required Delivery Date
zterm(4) type c, " Payment Terms
inco1(3) type c, " Inco Terms -1
inco2(28) type c, " Inco Terms -2
prsdt(10) type c, " pricing date
waerk(5) type c, " Document Currency
vkbur(4) type c, " Sales Office
vkgrp(3) type c, " Sales group
pltyp(2) type c, " Price List type
kdgrp(2) type c, " Customer Group
bstkd_e(35) type c, " Ship-to-party PO number
submi(10) type c, " Collective Number
bname(35) type c, " Name
ihrez(12) type c, " Your Reference
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
partner_1(25) TYPE c, " Partner(Bill To Party Number)
partner_2(25) TYPE c, " Partner(Payer Number)
partner_3(25) TYPE c, " Partner(Sales Responsible Number)
partner_4(25) TYPE c, " Partner(Order admin)
partner_5(25) TYPE c, " Partner(Contact person)
partner_1(10) type c, " Partner(Bill To Party Number)
partner_2(10) type c, " Partner(Payer Number)
partner_3(10) type c, " Partner(Sales Responsible Number)
partner_4(10) type c, " Partner(Order admin)
partner_5(10) type c, " Partner(Contact person)
tdspras_1(2) type c,
text_1(500) type c, " Text Before Items Z012
tdspras_2(2) type c,
text_2(500) type c, " Invocie Up Z034
tdspras_3(2) type c,
text_3(500) type c, " Invocie Down Z035
tdspras_4(2) type c,
text_4(500) type c, " Customer Reference Continue Z018
tdspras_5(2) type c,
text_5(500) type c, " Dispatch Marks/ Order Z019
tdspras_6(2) type c,
text_6(500) type c, " Ordered By Z003
tdspras_7(2) type c,
text_7(500) type c, " Sales Parameters Z002
kvgr1(3) type c, " Industry
kvgr2(3) type c, " customer BU
end of ty_header.
types: begin of ty_item,
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
bstkd_e(35) type c, " Ship-to-party PO number
posnr(6) type c, " POSTION NUMBER
matnr(18) type c, " Material Number
kwmeng(18) type c, " Order Quantity
pstyv(4) type c, " Sales doc. item categ
kursk(18) type c, " EXCHANGE RATE****
ffprf(8) type c, " DIP PROFILE
werks(4) type c, " Delivering Plant
vstel(4) type c, " SHIPPING POINT
lgort(4) type c, " STORAGE LOCATION
route(6) type c, " Route
kurrf(18) type c, " EXCHANGE RATE-FI
ntgew(18) type c, " Net Weight
brgew(18) type c, " Gross Weight
gewei(3) type c, " Weight Unit
prctr(10) type c, " profit center
abgrs(6) type c, " RESULT ANALYSIS KEY
kalsm_k(4) type c, " COSTING SHEET
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
text_1(500) type c, " material Text 0001
tdspras_1(1) type c,
text_2(500) type c, " Pr Text 9001
tdspras_2(1) type c,
end of ty_item.
types: begin of ty_schedule_line,
bstkd(35) type c, "PO number
bstdk(10) type c, "PO date
bstkd_e(35) type c, "Ship-to-party PO number
posnr(6) type c, "sales doc.Item
etdat(10) type c, "Schedule line date
wmeng(2) type c, "Order Quantity
end of ty_schedule_line.
types: begin of ty_err ,
auart(4) type c, " Sales Order Type
vkorg(4) type c, " Sales Organization
vtweg(2) type c, " Distrubution Channel
spart(2) type c, " Division
kunnr_1(10) type c, " Sold to Party
kunnr_2(10) type c, " Ship to Party
augru(3) type c, " Order Reason
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
ketdat(10) type c, " Required Delivery Date
zterm(4) type c, " Payment Terms
inco1(3) type c, " Inco Terms -1
inco2(28) type c, " Inco Terms -2
prsdt(10) type c, " pricing date
waerk(5) type c, " Document Currency
vkbur(2) type c, " Sales Office
vkgrp(3) type c, " Sales group
pltyp(2) type c, " Price List type
kdgrp(2) type c, " Customer Group
bstkd_e(35) type c, " Ship-to-party PO number
submi(10) type c, " Collective Number
bname(35) type c, " Name
ihrez(12) type c, " Your Reference
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
partner_1(25) type c, " Partner(Bill To Party Number)
partner_2(25) type c, " Partner(Payer Number)
partner_3(25) type c, " Partner(Sales Responsible Number)
partner_4(25) type c, " Partner(Order admin)
partner_5(25) type c, " Partner(Contact person)
tdspras_1(2) type c,
text_1(500) type c, " Text Before Items Z012
tdspras_2(2) type c,
text_2(500) type c, " Invocie Up Z034
tdspras_3(2) type c,
text_3(500) type c, " Invocie Down Z035
tdspras_4(2) type c,
text_4(500) type c, " Customer Reference Continue Z018
tdspras_5(2) type c,
text_5(500) type c, " Dispatch Marks/ Order Z019
tdspras_6(2) type c,
text_6(500) type c, " Ordered By Z003
tdspras_7(2) type c,
text_7(500) type c, " Sales Parameters Z002
kvgr1(3) type c, " Industry
kvgr2(3) type c, " customer BU
message(600) type c,
end of ty_err.
types: begin of ty_t685a,
kschl type kschl,
krech type krech,
end of ty_t685a.
INTERNAL TABLES
***header
data: g_krech_1(4) type c, " Calculation type for condition
g_krech_2(4) type c, " Calculation type for condition
g_krech_3(4) type c. " Calculation type for condition
g_krech_4(4) TYPE c, " Calculation type for condition
g_krech_5(4) TYPE c, " Calculation type for condition
g_krech_6(4) TYPE c, " Calculation type for condition
g_krech_7(4) TYPE c, " Calculation type for condition
g_krech_8(4) TYPE c, " Calculation type for condition
g_krech_9(4) TYPE c, " Calculation type for condition
g_krech_10(4) TYPE c, " Calculation type for condition
g_krech_11(4) TYPE c, " Calculation type for condition
g_krech_12(4) TYPE c, " Calculation type for condition
g_krech_13(4) TYPE c, " Calculation type for condition
g_krech_14(4) TYPE c, " Calculation type for condition
g_krech_15(4) TYPE c, " Calculation type for condition
g_krech_16(4) TYPE c, " Calculation type for condition
g_krech_17(4) TYPE c, " Calculation type for condition
g_krech_18(4) TYPE c, " Calculation type for condition
g_krech_19(4) TYPE c, " Calculation type for condition
g_krech_20(4) TYPE c. " Calculation type for condition
Items
data: g_krech_item_1(4) type c, " Calculation type for condition
g_krech_item_2(4) type c, " Calculation type for condition
g_krech_item_3(4) type c. " Calculation type for condition
g_krech_item_4(4) TYPE c, " Calculation type for condition
g_krech_item_5(4) TYPE c, " Calculation type for condition
g_krech_item_6(4) TYPE c, " Calculation type for condition
g_krech_item_7(4) TYPE c, " Calculation type for condition
g_krech_item_8(4) TYPE c, " Calculation type for condition
g_krech_item_9(4) TYPE c, " Calculation type for condition
g_krech_item_10(4) TYPE c, " Calculation type for condition
g_krech_item_11(4) TYPE c, " Calculation type for condition
g_krech_item_12(4) TYPE c, " Calculation type for condition
g_krech_item_13(4) TYPE c, " Calculation type for condition
g_krech_item_14(4) TYPE c, " Calculation type for condition
g_krech_item_15(4) TYPE c, " Calculation type for condition
g_krech_item_16(4) TYPE c. " Calculation type for condition
data: it_t685a type standard table of ty_t685a.
data: wa_bapi_header type bapisdhd1,
wa_bapi_headerx TYPE bapisdhd1x,
it_bapi_item type table of bapisditm,
it_bapi_itemx TYPE TABLE OF bapisditmx,
it_bapi_cond type table of bapicond,
it_bapi_condx TYPE TABLE OF bapicondx,
it_bapi_partner type table of bapiparnr,
it_bapi_shdl type table of bapischdl,
it_bapi_shdlx TYPE TABLE OF bapischdlx,
it_bapi_order_text type TABLE OF BAPISDTEXT,
it_bapireturn type table of bapiret2.
data: wa_bapi_item like line of it_bapi_item,
wa_bapi_itemx LIKE LINE OF it_bapi_itemx,
wa_bapi_cond like line of it_bapi_cond,
wa_bapi_condx LIKE LINE OF it_bapi_condx,
wa_bapi_partner like line of it_bapi_partner,
wa_bapi_shdl like line of it_bapi_shdl,
wa_bapi_shdlx LIKE LINE OF it_bapi_shdlx,
wa_bapi_order_text like LINE OF it_bapi_order_text,
wa_bapireturn like line of it_bapireturn.
*DATA: zmode(1) VALUE 'N'.
data: it_header type standard table of ty_header.
*DATA: it_temp_header TYPE STANDARD TABLE OF ty_header.
data: it_item type standard table of ty_item.
*DATA: it_temp_item TYPE STANDARD TABLE OF ty_item.
data: it_err type standard table of ty_err.
data: it_fline1 type standard table of tline,
wa_fline1 type tline.
data: it_thead1 type thead.
data: it_fline2 type standard table of tline,
wa_fline2 type tline.
data: it_thead2 type thead.
data: it_fline3 type standard table of tline,
wa_fline3 type tline.
data: it_thead3 type thead.
data: it_fline4 type standard table of tline,
wa_fline4 type tline.
data: it_thead4 type thead.
data: it_fline5 type standard table of tline,
wa_fline5 type tline.
data: it_thead5 type thead.
data: wa_header like line of it_header,
wa_item like line of it_item,
wa_err type ty_err,
wa_bill LIKE LINE OF it_bill,
wa_bill1 LIKE LINE OF it_bill,
wa_iterr like line of it_err,
wa_t685a like line of it_t685a.
wa_bill_item TYPE ty_bill_item.
data: it_schedule_line type standard table of ty_schedule_line,
wa_schedule_line type ty_schedule_line.
data: sales_order_no type bapivbeln-vbeln.
data: ext_sales_order_no type bapivbeln-vbeln.
Variable to be used to separate the fields which are concatenated by a
runtime character
*DATA: g_tabchar(1) TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
*DATA: wa_truxs_t_text_data TYPE truxs_t_text_data.
*DATA: g_filename TYPE string,
g_path TYPE string,
g_fullpath TYPE string,
g_user_action TYPE i,
g_file_encoding TYPE abap_encoding.
*DATA : g_text(8192),
data : g_mstring1(100) type c,
g_mstring2(100) type c,
g_mstring3(100) type c,
g_mstring4(100) type c,
g_mstring5(100) type c.
data: g_count1 type ebelp,
g_str_count1(6) type c.
data: g_count type ebelp,
g_str_count(6) type c.
*DATA: f_subrc LIKE sy-subrc,
f_subrc1 LIKE sy-subrc,
f_error(500) TYPE c,
item1(27) TYPE c,
item2(27) TYPE c,
item3(27) TYPE c,
item4(27) TYPE c,
i TYPE ekpo-ebelp.
*DATA: g_billplan_header TYPE c,
g_billplan_item TYPE c.
data : g_external_so type vbak-vbeln. "SO
SELECTION-SCREEN
selection-screen begin of block frame1 with frame title text-001 .
parameters:p_file1 type rlgrap-filename, "OBLIGATORY, "Header data.
p_file2 type rlgrap-filename, "OBLIGATORY, "Item Data.
p_file3 type rlgrap-filename, "Schedule line.
p_file4 type rlgrap-filename ."OBLIGATORY. "Error file.
selection-screen end of block frame1.
start-of-selection.
wa_bapi_header-doc_type = 'Z0MX'. "order type
wa_bapi_header-sales_org = '0130'."sales org
wa_bapi_header-distr_chan = '13'. "distr channel
wa_bapi_header-division = '13'. "division
Old code from copied program
wa_bapi_header-purch_no_s = wa_header-kunnr_2. " Ship to party
New code as required in Finland project
We are using to Header ->Order Tab -> Ship to Party -> Purchase order no (BSTKD_E) to store Old legacy SO number
wa_bapi_header-purch_no_s = 'MX100443'. "External SO i.e Old legacey SO number
wa_bapi_header-ref_1_s = '0000666666'. "Sold to party
wa_bapi_header-ord_reason = wa_header-augru.
wa_bapi_header-purch_no_c = 'ddr1234'. " PO number
wa_bapi_header-purch_date = sy-datum. " PO date
wa_bapi_header-req_date_h = sy-datum. " Required Delivery Date
wa_bapi_header-pmnttrms = '01'. " Payment Terms
wa_bapi_header-incoterms1 = wa_header-inco1.
wa_bapi_header-incoterms2 = wa_header-inco2.
wa_bapi_header-price_date = wa_header-prsdt. " Pricing date
wa_bapi_header-currency = wa_header-waerk. " Document Currency
wa_bapi_header-sales_grp = wa_header-vkgrp. " Sales group
wa_bapi_header-price_list = wa_header-pltyp. " Price list type
wa_bapi_header-cust_group = wa_header-kdgrp. " Cust Group
wa_bapi_header-ship_type = wa_header-vsart. " Shipping Type
wa_bapi_header-purch_no_s = wa_header-bstkd_e. " Ship-to-party po number
wa_bapi_header-collect_no = wa_header-submi. " Collective No.
wa_bapi_header-name = wa_header-bname. " Name
wa_bapi_header-ref_1 = wa_header-ihrez. " Your Reference
wa_bapi_header-cust_grp1 = wa_header-kvgr1. " Industry
wa_bapi_header-cust_grp2 = wa_header-kvgr2. " Customer BU
*ENDFORM. " f_header
IF wa_header-partner_1 IS NOT INITIAL.
wa_bapi_partner-partn_role = 'AG'.
wa_bapi_partner-partn_numb = '0000666666'.
wa_bapi_partner-itm_number = '000000'.
append wa_bapi_partner to it_bapi_partner.
clear wa_bapi_partner.
ENDIF.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = wa_header-partner_2
importing
output = wa_header-partner_2.
IF wa_header-partner_2 IS NOT INITIAL.
wa_bapi_partner-partn_role = 'WE'.
wa_bapi_partner-partn_numb = '0000666666'.
wa_bapi_partner-itm_number = '000000'.
append wa_bapi_partner to it_bapi_partner.
clear wa_bapi_partner.
ENDIF.
perform f_item.
data : order_items_inx type table of bapisditmx with header line.
order_items_inx-material = 'X'. "
order_items_inx-target_qty = 'X'. "
order_items_inx-comp_quant = 'X'. "
order_items_inx-trgqty_den = 'X'.
order_items_inx-rnddlv_qty = 'X'.
order_items_inx-updateflag = 'I'.
order_items_inx-target_qu = 'X'.
order_items_inx-plant = 'X'. "
append order_items_inx.
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
exporting
salesdocumentin = 'MX11111152'
order_header_in = wa_bapi_header
order_header_inx = wa_bapi_headerx
importing
salesdocument = sales_order_no
tables
return = it_bapireturn
order_items_in = it_bapi_item
order_items_inx = order_items_inx
order_partners = it_bapi_partner
order_conditions_in = it_bapi_cond.
if sy-subrc is initial.
commit work.
endif.
*& Form f_item
text
form f_item .
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = wa_item-posnr
importing
output = wa_item-posnr.
wa_item-posnr = '000010'.
IF sy-subrc EQ 0. "IS INITIAL.
move wa_item-posnr to g_str_count."commented out by shakti
ENDIF.
wa_bapi_item-itm_number = wa_item-posnr. " Line item
WA_BAPI_ITEM-PO_ITM_NO = WA_ITEM-EBELP.
wa_bapi_item-division = wa_item-spart.
wa_bapi_item-purch_no_c = 'ddr1234'. " po number
wa_bapi_item-purch_date = sy-datum. " po date
wa_bapi_item-purch_no_s = 'MX11111112'. " Ship-to-party po number
wa_item-matnr = 'MAXIMO_SERVICE'.
call function 'CONVERSION_EXIT_MATN1_INPUT'
exporting
input = wa_item-matnr
importing
output = wa_item-matnr
exceptions
length_error = 1
others = 2.
if sy-subrc is initial.
wa_bapi_item-material = wa_item-matnr. "material
endif.
wa_bapi_item-target_qty = '1'. " Order qty
wa_bapi_item-comp_quant = '1'.
wa_bapi_item-target_qu = 'EA'.
wa_bapi_item-fixed_quan = '1'.
wa_bapi_item-comp_quant = wa_item-kwmeng.
wa_bapi_item-trgqty_den = '1'.
wa_bapi_item-rnddlv_qty = wa_item-kwmeng.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_item-ps_psp_pnr
IMPORTING
output = wa_item-ps_psp_pnr.
IF sy-subrc = 0.
wa_bapi_item-wbs_elem = wa_item-ps_psp_pnr.
ENDIF.
wa_bapi_item-item_categ = 'ZMAX'.
wa_bapi_item-ex_rate_fi = wa_item-kurrf.
wa_bapi_item-dli_profil = wa_item-ffprf. " Dynamic item processor profile
wa_bapi_item-route = wa_item-route. " route
wa_bapi_item-exchg_rate = wa_item-kursk.
wa_bapi_item-plant = '2090'. " Plant
wa_bapi_item-ship_point = 'FN11'. " Shipping point
wa_bapi_item-store_loc = wa_item-lgort. " stg loc
REPLACE ALL OCCURRENCES OF ',' IN wa_item-ntgew WITH '.'.
REPLACE ALL OCCURRENCES OF ',' IN wa_item-brgew WITH '.'.
wa_bapi_item-net_weight = wa_item-ntgew. "
wa_bapi_item-gross_wght = wa_item-brgew. "
call function 'CONVERSION_EXIT_CUNIT_INPUT'
exporting
input = wa_item-gewei
language = sy-langu
importing
output = wa_item-gewei.
EXCEPTIONS
unit_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
wa_bapi_item-untof_wght = 'KG'. " weight unit
replace all occurrences of ',' in wa_item-kursk with '.'.
replace all occurrences of ',' in wa_item-kurrf with '.'.
wa_bapi_item-profit_ctr = wa_item-prctr. " Profit center
wa_bapi_item-resanalkey = wa_item-abgrs. " RESULT ANALYSIS KEY
wa_bapi_item-cstg_sheet = wa_item-kalsm_k. " COSTING SHEET
append wa_bapi_item to it_bapi_item.
endform. " f_item
Thanks & regards,
Chetansee the following to create sales order:-
*& Report ZSALESORDER
*&DEVELOPED BY JANI KRUPA 4.10.2008
REPORT ZSALESORDER.
Parameters
Sales document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d .
SELECTION-SCREEN END OF LINE.
Complete Deliver
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text10 FOR FIELD p_autlf.
PARAMETERS: p_autlf TYPE autlf DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
DATA: lt_schedules_ink TYPE STANDARD TABLE OF bapisdhead1
WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
v_text10 = 'Complete delivery'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
header-COMPL_DLV = p_autlf.
header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF. -
I am not able to create a new tab, eventhough i have tried all ways to do it.
Normally the existing (current) tab has at the end an "+", and that gives you the option to make a new tab to the right. My Firefox tab does not have the "+", and I'm not able to create a new tab for another link. The new tab option is not working on my Mozilla internet browser.
Use Hotkey CTRL + T to Open a Blank Tab. Do the following too:
go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check and tell if its working. -
Not able to create a customer master record with US as the country code
Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is *NO JURISDICTION CODE* COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
I have checked the field in the account group(OBD2) but tax code is in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message,
but when I tried checking the settings for a different company code's customer data base (us in county code)
I can see that there is a number mentioned in the address tab under tax jurisdiction field (beside time zone) which is not populating for this company code.
So, do anyone know where exactly we mention this number so that it populates in that field of address.
Hope am clear.
hope to receive a solution
thanks & regards
vinilaHi,
You need to maintain the JURISDICTION CODE for country US. This JURISDICTION CODE code mainatanance purely FI/CO part.. it depends on the country's tax procedures.. Better take the help from your FI/CO consultant..
Menu path for Defining tax jurisdiction code
IMG -- Financial accounting -- Financial accounting global settings -- tax on sales and purchases -- basic settings -- define tax jurisdiction
reward if helps
Muthu
Edited by: Muthupandiyan on Mar 14, 2008 11:09 AM -
Not able to create index for organization
in transaction ses_admin, i created an index for business object BAS_BUPA of type 1,ie individual account.
However, i am not able to create index for BAS_BUPA of type 2
It says "No entry in table SIC_INDEX_MAIN for index object BAS_BUPA and index 2"hi,
The index is for Business Partner, so it includes both Persons and Organizations. So, only one index needs to be created for both.
The functioning is correct, just that i missed it. -
Not able to create EAR file for WAR file extracted project
Hi Experts,
I am trying to import a WAR file, make changes to the project and create an EAR file for the same. I am not able to remove import
errors despite of adding required jar files to it.
Also, I am not able to create an EAR file for the same.
I have copied the steps here with screen shots. Below are the steps :
Import WAR file in NWDS 7.3 – Enterprise Portal perspective
Select WAR file to create WAR and EAR project for it.
Project created with import errors. e.g – com.sapportals.portal.prt*
Found jar file from Class – target jar file table.
e.g – for Class com.sapportals.portal.prt.resource.IResource needed jar file is tc~epbc~prt~api.jar
Copied required jar files in WEB-INF -> lib folder.
Configure Build path and Add External jars.
Portalapp file screen shot
I think errors should go now, but they still exist.
Next I right click on WAR project and tried updating related EAR project.
Next, Export EAR file from EAR project.
I have tried both EAR types.
But EAR file is not created.
Please help me in removing the errors.
Thanks in advance :-)
Anubha PandeyHi Anubha,
I feel that you're missing JAR dependencies and hence not able to resolve the above import errors.
Please go through the below thread for the AFP Masthead customization and follow the same:
How to download and change AFP Masthead on SAP Portal 7.3
Hope, this will help!!!
BR,
Anurag -
Not able to create interactive pdf
Hello everyone,
I'm not able to create an offline pdf using exclusively ABAP. I tried using the tutorial "Offline Interactive Forms Using ABAP" but i'm missing something. I allready created the form using transaction SFP, and my ABAP program is like this:
REPORT ztest_interactive_forms.
DATA: wa_lfa1 LIKE lfa1.
DATA: fm_name TYPE funcname.
DATA: fp_outputparams TYPE sfpoutputparams.
DATA: fp_docparams TYPE sfpdocparams.
DATA: fp_formoutput TYPE fpformoutput.
PARAMETERS: p_lifnr LIKE lfa1-lifnr.
START-OF-SELECTION.
SELECT SINGLE lifnr name1 name2 ort01 FROM lfa1 INTO CORRESPONDING FIELDS OF wa_lfa1 WHERE lifnr = p_lifnr.
first get name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = 'ZTEST_NCS'
IMPORTING
e_funcname = fm_name.
Set output parameters and open spool job
fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
fp_outputparams-getpdf = 'X'. " launch print preview
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
Set form language and country (->form locale)
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
Now call the generated function module
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
vendor_data = wa_lfa1
IMPORTING
/1bcdwb/formoutput = fp_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
When function module "fm_name" is called, variable fp_formoutput is returned blank (0 pages).
Can anyone help or suggest something ?
Thank you in advance,
Nuno SantosHi,
The default export parameter is /1bcdwb/formoutput of type
fpformoutput. This parameter has to be evaluated in the calling program if the
resulting document needs to be handled by the program itself. Export parameters
can be added only for those interfaces that are compatible with Smart Forms.
There is also only one standard exporting parameter of the form's generated
function module: /1bcdwb/formoutput of type fpformoutput. It contains three
fields:
. pdf: Contains the PDF data in hexadecimal form if parameter getpdf of
function module FP_JOB_OPEN is set to 'X'. This is required if your
program has a download functionality or if you want to pass on your PDF to
Business Communication Service to fax or e-mail it.
Detail information on Business Communication Service can be found in the
SAP Library, Topic .Generic Business Tools for Application Developers
(BC-SRV-GBT).. See also standard demo reports BCS_EXAMPLE_...
. pdl: contains the PDL data in hexadecimal form if parameter getpdl of
function module FP_JOB_OPEN is set to 'X'.
. pages: returns the number of pages that have been printed.
There is also only one standard exporting parameter of the form's generated
function module: /1bcdwb/formoutput of type fpformoutput. It contains three
fields:
. pdf: Contains the PDF data in hexadecimal form if parameter getpdf of
function module FP_JOB_OPEN is set to 'X'. This is required if your
program has a download functionality or if you want to pass on your PDF to
Business Communication Service to fax or e-mail it.
Detail information on Business Communication Service can be found in the
SAP Library, Topic .Generic Business Tools for Application Developers
(BC-SRV-GBT).. See also standard demo reports BCS_EXAMPLE_...
. pdl: contains the PDL data in hexadecimal form if parameter getpdl of
function module FP_JOB_OPEN is set to 'X'.
. pages: returns the number of pages that have been printed.
Note:
. getpdf: If set to 'X', the /1bcdwb/formoutput-pdf field of the form's generated
function module will contain the PDF data in hexadecimal form. This is
helpful for further processing the PDF file. A preview will not be possible if
getpdf = 'X'
Hope this will be helpfull.
Regards
Adil
Edited by: Syed Abdul Adil on Jun 17, 2008 4:23 PM
Edited by: Syed Abdul Adil on Jun 17, 2008 4:24 PM -
Hello everyone,
I'm not able to create an offline pdf using exclusively ABAP. I tried using the tutorial "Offline Interactive Forms Using ABAP" but i'm missing something. I allready created the form using transaction SFP, and my ABAP program is like this:
REPORT ztest_interactive_forms.
DATA: wa_lfa1 LIKE lfa1.
DATA: fm_name TYPE funcname.
DATA: fp_outputparams TYPE sfpoutputparams.
DATA: fp_docparams TYPE sfpdocparams.
DATA: fp_formoutput TYPE fpformoutput.
PARAMETERS: p_lifnr LIKE lfa1-lifnr.
START-OF-SELECTION.
SELECT SINGLE lifnr name1 name2 ort01 FROM lfa1 INTO CORRESPONDING FIELDS OF wa_lfa1 WHERE lifnr = p_lifnr.
first get name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = 'ZTEST_NCS'
IMPORTING
e_funcname = fm_name.
Set output parameters and open spool job
fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
fp_outputparams-getpdf = 'X'. " launch print preview
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
Set form language and country (->form locale)
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
Now call the generated function module
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
vendor_data = wa_lfa1
IMPORTING
/1bcdwb/formoutput = fp_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
When function module "fm_name" is called, variable fp_formoutput is returned blank (0 pages).
Can anyone help or suggest something ?
Thank you in advance,
Nuno SantosDoes this happen with all ID files or just some files? What OS? Try to create a one work ID file with Times New Roman and let the file contain a single word? Can you create a pdf?
-
Hi seniors,
While doing testing in QA i am not able to creat the infotype 0008 .
I have schecked the table T510A,there i could find the Pay Roll Types & PayrollScale Area ,
Even system automatically picks up the data but when i am tring to select the wage types its not accepting any and throughing an error of 01 not available in T510A.
What could be the possible reason.please help.Hi Lata & Nasim,
Thanks for the updates,I have gone through all the system settings in QA which i had transported from DEV .
I have checked all the possible settings and features,everything is in place.
Do i need to Reactivate all the features in QA again.
Now out of my 23 Infotypes configured in actions following are also not working.
0077,0094,0009,0185-no subtye avilable,i am even not able to maintain them in PA30.
what could be the possible reasons for thiese errors in QA.
Please guide.
Edited by: srssaphr09 on Mar 25, 2011 1:59 PM
Edited by: srssaphr09 on Mar 25, 2011 2:26 PM -
TF400463 :Can not able to create team project in tfs 2013
HI
When am trying to create new project in TFS Collection I cant able to create a project. Since am getting the below error "TF400463 Project Creation failed with error: Object reference not set to an instance of an object"Hi
since the problem not yet solved ... can you share some more details so that I can try it .. find the below error message which am getting ...
Error Code : TF400463
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe"
stroked="f"><v:stroke joinstyle="miter"><v:formulas><v:f eqn="if lineDrawn pixelLineWidth 0"><v:f eqn="sum @0 1 0"><v:f eqn="sum 0 0 @1"><v:f eqn="prod @2 1 2"><v:f
eqn="prod @3 21600 pixelWidth"><v:f eqn="prod @3 21600 pixelHeight">
<v:f eqn="sum @0 0 1">
<v:f eqn="prod @6 1 2">
<v:f eqn="prod @7 21600 pixelWidth">
<v:f eqn="sum @8 21600 0">
<v:f eqn="prod @7 21600 pixelHeight">
<v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype><v:shape alt="cid:[email protected]" id="_x0000_i1025" style="width:723pt;height:275.25pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\arockia_kumar.ITLINFOSYS\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
</v:imagedata></v:shape>
Maybe you are looking for
-
How to display a modal message while processing in a thread.
I have difficulty in display a modal dialog while in processing in a background. I have created the following class. package fedex.screen.component; import java.awt.*; // This infobox is a modal dialog which display static text and stay // on screen
-
Getting error in SAP Authentication configuration for BO Edge 3.1 SP3
Hi, I have installed BusinessObject Edge Series 3.1 SP3 and BusinessObject XI 3.1 SAP SP3 on Windows 2008 server. I am trying to configure SAP Authentication between BO and BI server. In CMC i have provided all the details under Entitlement System an
-
Adobe Reader X Help internet link
Hi, could anyone let me know how to fix the problem in Adobe Reader X when you click Help from the menu bar followed by Adobe Reader X Help. Instead of taking you to an Adobe help page via a web browser, you get the error; "Online Help content canno
-
Am I allowed to publish an application with a Windows Media Player control in it?
Just like the title says, am I allowed to publish an application with a AxWindowsMediaPlayer control in it? I don't want to get sued just because of this. Thanks!
-
Oracle Database 10g Express Edition installing on win2003 SP2
We are trying to install oracleXE on W2k3 SP2 and getting failed after diplaying "Publishing product information" at final stage. Noting is prompted after this step.