Not able to create new item

Hi ,
I am trying to create a new item at the master level and getting the following message :
You are only authorized to access company 'ABC1000' .
Value secured: You Are Only Authorised To Access Company 'ABC1000' .
I am not able to change the accounts to ABC1000 in the cost of goods sold accounts and other accounts in the item creation screen.
Is there any profile options that I am missing?
Regards,

Just keep in mind there might be other security rules that you may have to change as well.
Sandeep Gandhi

Similar Messages

Not able to create new folder in list/library sharepoint 2013 foundation

I am not able to create new folder in library and also not able to edit existing list item
Below is the error:
Getting Error Message for Exception
System.Web.HttpUnhandledException (0x80004005): Exception of type
'System.Web.HttpUnhandledException' was thrown. --->
System.NullReferenceException: Object reference not set to an
instance of an object. at
Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureList()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureListAndFor
m() at
Microsoft.SharePoint.WebPartPages.ListFormWebPart.UseLegacyForm()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.CreateChildCont
rols() at System.Web.UI.Control.EnsureChildControls() at
Microsoft.SharePoint.WebPartPages.WebPart.get_WebPartMenu() at Mi
crosoft.SharePoint.WebPartPages.ListFormWebPart.CreateWebPartMenu()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.OnLoad(Ev...
Please help.It happens only on few sub sites

Hi V_K04,
You said that it happened only on few sub sites, whether this issue occurred on some subsites, and some subsite worked well.
Please check whether there are some differences between the subsites that worked well and the problematic subsites.
Whether this issue occurred on all libraries and lists on problematic subsites.
Whether there are some customizations in these problematic libraries and lists.
Please create a new library and a new list, test again, compare the result.
BestRegards,
Wendy
Wendy Li
TechNet Community Support

Not able to create new e-mail on N8 using Mail for...

Not able to create new e-mail on N8 using Mail for Exchange.
Currently using google for my domain, but settings are the same as explained on the google Sync webpage: http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=147951
When creating reply on mail the application crashes. When creating new mail it says "Kan bewerking niet uitvoeren" in english: "Unable to execute action".
Any idea why creating mail is not possible?
Regards,
Joris

problem is known
more info there:
/t5/Nseries-and-S60-Smartphones/N8-syncing-with-Google-contacts-amp-calendar/td-p/772020
there is little workaround aslo.

Not able to create new entry in RSADMIN Table

Hi All,
        I am going thru the OSS note 1275837 (Note 1275837 - PrecServer: process based load distribution (ABAP part)), as it recommends
        add the entry "BWPREC_USE_NEW_LOAD" with value "X" in table "RSADMIN"
      When I check in SE11 and SE16 there is no option to create button for above entry in table RSADMIN.
      Please advise for any help to create above entry.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Jan 11, 2010 4:20 PM
   I got access key from our basis team. But still not able to create new entry as mentioned in OSS note. Any further help....
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Jan 11, 2010 9:13 PM

Hi
Goto SM30 - Table Maintanance Generator and enter the table name and click on button maintain ,it will show the error message
"The maintenance dialog for RSADMIN is incomplete or not defined" because the table maintenance is not allowed manually.
First Option
When you double click the error message a performance assistant screen will open in that you can see Procedure
"Generate the required maintenance dialog" click on that and try to maintain the table using Access Key, as i dont have access key i have not tried this option.
Second Option
You can write an SE38 program with an insert statement.
TABLES rsadmin.
DATA: wa TYPE rsadmin.
wa-object = 'object name'.
wa-value = 'X'.
INSERT into rsadmin values wa.
Thanks

Not able to create new users or groups

hi all,
We have configured multiple LDAPs by changing XML file.
But now we are not able to create new users or groups.It is giving error saying that "Adapter is configured as read-only"
Can anybody help me out in this problem.
Thanking You,
Amol.

For multiple LDAPs to work we have downloaded the Xml file namely "Flat hierarchy + Database "
We made the necessary changes and then uploaded it.
Now we want to create users or groups in portal-database and not in LDAP. But it is throwing error saying that "Adapter is read only". We suppose that it is trying to create users and groups in LDAP.
So can anyone help us to create users or groups in portal-database.
Thanking You,
Amol.

Question - are we not able to create indexed items in custom folders?

Just a question here. I would like to use the index/Value option for parameters in a workbook. This is where the List of Values drop down box for the parameter would show both the index number and the value and let you choose to select based on the index or on the value. An obvious example of this would be with months, where you would have January (1), February (2), March (3), and so forth. To do this, you have to set up indexed items in Discoverer Administrator.
That is where I am running into a problem/issue. I am not being able to pick an item and click to look at its properties, scroll down to the Indexed Item property, click on that property, and get a list of items to pick from. On the indexed item property I see a value of <None>, and when I click on that property, no list of items pops up.
I have defined indexed items before, but that was always done on regular folders (imported from the database). In this case, I am working with a custom folder.
The SQL that I have keyed in for this custom folder is this -
SELECT flex_value, description, flex_value_set_id, flex_value_id
FROM fnd_flex_values_vl
WHERE flex_value_set_id = 1011187
ORDER BY flex_value;
FND_FLEX_VALUES_VL is an Oracle view, that combines Oracle tables FND_FLEX_VALUES and FND_FLEX_VALUES_TL.
My goal would be to show both the FLEX_VALUE and the DESCRIPTION in the parameter to the users, so they can better decide what value(s) they want to pick. This is a general ledger application that I am working with, with the General Ledger account number segments and the Flexfield value set for each segment (we are using 7 segments to define our general ledger account number).
Am I not able to define indexed items when working with a custom folder? The documentation is not real clear. It talks about simple folders and complex folders, but does not mention custom folders, at least that I can find. Or perhaps I need to do something different with how I code the SQL for the custom folder to enable me to define indexed items in the custom folder?
Hope this makes some sense. Always a challenge to explain the situation in a clear manner. Thanks for any insight/assistance anyone can give me on this.
John Dickey

Ahh, those picky little details. Once I created an Item Class LOV on my item, then I could click on the Indexed Item property and get the list of fields in the folder to show up and pick my item (to be the indexed item) from that list. I went back to the user guides and the documentation sure does not indicate this requirement. For example, in the Discoverer Administrator guide, you have the section (page 9-30 in the version I have) titled "How to assign an indexed item to an item". Nowhere in that section does it say that you have to create an Item Class LOV first to be able to do this. Though it does show how if you do not have an LOV on the item you pick to be the indexed item, you will be prompted to create an LOV for that item. In the past I had my LOVs created first. This time I was trying to do the indexed item first before creating my LOVs. So lesson learned - you have to create an Item Class LOV first before you can assign an indexed item to an item.
Thanks for the assistance.
John Dickey

Users not able to create new ojects in Integration Repository

Hi,
    We did a heterogeneous copy of PI from AIX to HPUX. After that we have done few post installation steps w.r.to PI Specific usage type.
    all the developers are able to login to the integration repository, but when they are trying to "Edit" or "Create" new objects they are getting the following error
"You are not permitted to create new objects since the software component cannot be changed".
   this is working with PISUPER user but not with any development user id and passwd.
    any response is higly appreciated.
Thanks
Sourav

Hey NM,
    Thanks a lot for your suggestion. problem got resolved when i did what you said (checking the attributes with developers user id's)
Thanks
Sourav

Not able to see new Item in OPM-ASCP

Hi everyone,
I am working on OPM-ASCP.I have defined a Forecast Set,Schedule and a Sourcing Rule.When I am trying to assign the Sourcing Rule to an assignment set i am not getting my new item in the LOV.Please tell me what should i do?
regards and thanks in advance,
VAS.

Hi ,
I think you are doing al this from RSA1. Please user RSA1OLD for making any changes to 3.x data source.This avoids a lot confusions in terms of proposal and fields tabs which exists as a part 7.0 data source..
In RSA1OLD , go to the change mode of data source you will be able to add the new fields.
Hope this solves your issue.
-Vikram

Not able to edit News Items in KM

Hi,
While trying to edit the News items in Content Management of SAP EP, getting the below error.
java.lang.NoSuchMethodError: com/sapportals/wcm/repository/manager/cm/persistence/ITransactionContext.getResourcesForDeletionOnCommit()Ljava/util/Map;
t com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.addForDeleteOnCommit(BasicPersistenceDB.java:5487)
at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.releaseContent(BasicPersistenceDB.java:5112)
at com.sapportals.wcm.repository.manager.cm.CmRepository.isRollbacked(CmRepository.java:2054)
at com.sapportals.wcm.repository.manager.cm.persistence.TransactionContext$DefaultTransactionContext.wasRollbacked(TransactionContext.java:109)
at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.rollback(BasicPersistenceDB.java:491)
at com.sapportals.wcm.repository.manager.cm.CmNamespaceAndContentManager.setContent(CmNamespaceAndContentManager.java:2391)
at com.sapportals.wcm.repository.ResourceImpl.internalUpdateContent(ResourceImpl.java:3878)
at com.sapportals.wcm.repository.ResourceImpl.updateContent(ResourceImpl.java:1888)
at com.sapportals.wcm.service.xmlforms.utils.ResManager.updateResource(ResManager.java:660)
at com.sapportals.wcm.service.xmlforms.utils.ResManager.createOrUpdateResourceWithPropertyErrors(ResManager.java:833)
at com.sapportals.wcm.service.xmlforms.project.Project.doSave(Project.java:439)
at com.sapportals.wcm.service.xmlforms.project.Project.postStream(Project.java:295)
at com.sapportals.wcm.service.xmlforms.project.Project.saveItem(Project.java:371)
at com.sapportals.wcm.app.xmlforms.EditServlet.doGetAction(EditServlet.java:173)
at com.sapportals.wcm.app.xmlforms.XFBaseServlet.doGet(XFBaseServlet.java:241)
at com.sapportals.wcm.app.xmlforms.XFBaseServlet.doPost(XFBaseServlet.java:261)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.wcm.app.xmlforms.XFBaseServlet.service(XFBaseServlet.java:134)
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:322)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:557)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Please let me know, how to overcome this error.

Ravi,
you might like to check (and implement) SAP Note 898637.
Hope this is help full!!!
Regards
Vijay K

Not able to create New Transformation file in BPC

I am getting error in BPC 10.0 when creating new transformation file from the EPM tab in Excel.
When i click on create New transformation then some garbage value appear on the Excel cells. Problem with Authorization is not the case as i have checked all the authorizations in BI and BPC.
Attached is the screen shot of the same.

Hello Nidheesh,
Can you check in UJFS Tcode whether you have file named newconversiontable.xlt and newtransformation.xlt in \ROOT\WEBFOLDERS\ADMINTEMPLATES.
Also can you check the Language settings of yours in Excel Option
Regards
Bhagyesh Ravange

Not able to create new repots and view existing reports.

When I try to create new reports I get the following message and then system disconnects from the server.
"Could not determine a value for variable 0DAT from the authorizations"
Please help.

Hi,
Check the foolwing links, one of them could help you:
/message/1507585#1507585 [original link is broken];&#56577;
Re-appearing variable
/message/2477142#2477142 [original link is broken]
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Not able to create new domian name while sign up

Hi All, I am unable to create new domain name with the name of as I want . Kindly let me know how can I do this. Below is the error which occurs while user creation.
Please help me out I need to implement Windows Intune in my organization.
Thanks Shankar kumar

You can certainly try Shankar. You will find the telephone number you require here
http://support.microsoft.com/gp/customer-service-phone-numbers/en-ie
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Not able to create new paragraph format for copied layout of WESCHEINVERS3

hi all,
Iam facing one of the pecular problem I copied WESCHEINVERS3 into Zlayout from client 000.
when i tried to create new paragraph format I found the create element greyed out I have never seen this issue earlier.
May I know why the menu path paragraph->EDIT->create element is greyed out.
thanks

Hi,
U can create new paragraph formats, windows, character formats etc., only in original language of the FORM.. I guess u were trying to create a new paragraph format in 'EN' but the original language of form 'WESCHEINVERS3' is 'DE', so u can create the new paragaraph format in the copied Z form only in DE language.
Try to open the Z FORM in DE and create the Paragraph format...
Hope it helps!!
Rgds,
Pavan

Not able to create New BI Semantic Model Connection

Hi,
I am facing some issues in creating BI Semantic Model connection,It says below Error.
<contenttemplate>
There were errors found while validating the page:
Cannot connect to the server or database.
Please help me to fix these Error.
</contenttemplate>

Hi,
Now i am able to configure the BISM successfully but if i try to open the Create POWER view report i am getting these Error Message.
Error Message:-
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'http://cmfabduappd1vm5/sites/two/alnahari/PowerPivot%20Gallery/Sharepoint_MGEC.bism'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem
xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'http://cmfabduappd1vm5/sites/two/alnahari/PowerPivot%20Gallery/Sharepoint_MGEC.bism'. Verify that the connection information
is correct and that you have permissions to access the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.DataExtensions</Source><Message>The metadata discovery operation DISCOVER_CSDL_METADATA returned
invalid content. Verify that the connection string and permissions are correct.</Message></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>

Not able to create new user (account)

I would like to create a new user on my account, but when I click on the + sign I get no response. It is not grey'd out, and appears to be an option - the lock is open, and I am the adminstrator signed in as such(there is currently only one account on the compuer)
I've tried the obvious solutions like restarting. Any tips?
Thanks!

To confirm:
This is in reference to OS 10.3.9 user accounts - not iPod.
I didn't mean to post in this forum!

Not able to create new item

Similar Messages

Maybe you are looking for