Not able to create new repots and view existing reports.

When I try to create new reports I get the following message and then system disconnects from the server.
"Could not determine a value for variable 0DAT from the authorizations"
Please help.

Hi,
Check the foolwing links, one of them could help you:
/message/1507585#1507585 [original link is broken];&#56577;
Re-appearing variable
/message/2477142#2477142 [original link is broken]
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Similar Messages

Not able to create new e-mail on N8 using Mail for...

Not able to create new e-mail on N8 using Mail for Exchange.
Currently using google for my domain, but settings are the same as explained on the google Sync webpage: http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=147951
When creating reply on mail the application crashes. When creating new mail it says "Kan bewerking niet uitvoeren" in english: "Unable to execute action".
Any idea why creating mail is not possible?
Regards,
Joris

problem is known
more info there:
/t5/Nseries-and-S60-Smartphones/N8-syncing-with-Google-contacts-amp-calendar/td-p/772020
there is little workaround aslo.

Not able to create new folder in list/library sharepoint 2013 foundation

I am not able to create new folder in library and also not able to edit existing list item
Below is the error:
Getting Error Message for Exception
System.Web.HttpUnhandledException (0x80004005): Exception of type
'System.Web.HttpUnhandledException' was thrown. --->
System.NullReferenceException: Object reference not set to an
instance of an object. at
Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureList()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureListAndFor
m() at
Microsoft.SharePoint.WebPartPages.ListFormWebPart.UseLegacyForm()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.CreateChildCont
rols() at System.Web.UI.Control.EnsureChildControls() at
Microsoft.SharePoint.WebPartPages.WebPart.get_WebPartMenu() at Mi
crosoft.SharePoint.WebPartPages.ListFormWebPart.CreateWebPartMenu()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.OnLoad(Ev...
Please help.It happens only on few sub sites

Hi V_K04,
You said that it happened only on few sub sites, whether this issue occurred on some subsites, and some subsite worked well.
Please check whether there are some differences between the subsites that worked well and the problematic subsites.
Whether this issue occurred on all libraries and lists on problematic subsites.
Whether there are some customizations in these problematic libraries and lists.
Please create a new library and a new list, test again, compare the result.
BestRegards,
Wendy
Wendy Li
TechNet Community Support

Not able to create new entry in RSADMIN Table

Hi All,
        I am going thru the OSS note 1275837 (Note 1275837 - PrecServer: process based load distribution (ABAP part)), as it recommends
        add the entry "BWPREC_USE_NEW_LOAD" with value "X" in table "RSADMIN"
      When I check in SE11 and SE16 there is no option to create button for above entry in table RSADMIN.
      Please advise for any help to create above entry.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Jan 11, 2010 4:20 PM
   I got access key from our basis team. But still not able to create new entry as mentioned in OSS note. Any further help....
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Jan 11, 2010 9:13 PM

Hi
Goto SM30 - Table Maintanance Generator and enter the table name and click on button maintain ,it will show the error message
"The maintenance dialog for RSADMIN is incomplete or not defined" because the table maintenance is not allowed manually.
First Option
When you double click the error message a performance assistant screen will open in that you can see Procedure
"Generate the required maintenance dialog" click on that and try to maintain the table using Access Key, as i dont have access key i have not tried this option.
Second Option
You can write an SE38 program with an insert statement.
TABLES rsadmin.
DATA: wa TYPE rsadmin.
wa-object = 'object name'.
wa-value = 'X'.
INSERT into rsadmin values wa.
Thanks

Not able to create new users or groups

hi all,
We have configured multiple LDAPs by changing XML file.
But now we are not able to create new users or groups.It is giving error saying that "Adapter is configured as read-only"
Can anybody help me out in this problem.
Thanking You,
Amol.

For multiple LDAPs to work we have downloaded the Xml file namely "Flat hierarchy + Database "
We made the necessary changes and then uploaded it.
Now we want to create users or groups in portal-database and not in LDAP. But it is throwing error saying that "Adapter is read only". We suppose that it is trying to create users and groups in LDAP.
So can anyone help us to create users or groups in portal-database.
Thanking You,
Amol.

Users not able to create new ojects in Integration Repository

Hi,
    We did a heterogeneous copy of PI from AIX to HPUX. After that we have done few post installation steps w.r.to PI Specific usage type.
    all the developers are able to login to the integration repository, but when they are trying to "Edit" or "Create" new objects they are getting the following error
"You are not permitted to create new objects since the software component cannot be changed".
   this is working with PISUPER user but not with any development user id and passwd.
    any response is higly appreciated.
Thanks
Sourav

Hey NM,
    Thanks a lot for your suggestion. problem got resolved when i did what you said (checking the attributes with developers user id's)
Thanks
Sourav

Not able to create new item

Hi ,
I am trying to create a new item at the master level and getting the following message :
You are only authorized to access company 'ABC1000' .
Value secured: You Are Only Authorised To Access Company 'ABC1000' .
I am not able to change the accounts to ABC1000 in the cost of goods sold accounts and other accounts in the item creation screen.
Is there any profile options that I am missing?
Regards,

Just keep in mind there might be other security rules that you may have to change as well.
Sandeep Gandhi

Not able to create New Transformation file in BPC

I am getting error in BPC 10.0 when creating new transformation file from the EPM tab in Excel.
When i click on create New transformation then some garbage value appear on the Excel cells. Problem with Authorization is not the case as i have checked all the authorizations in BI and BPC.
Attached is the screen shot of the same.

Hello Nidheesh,
Can you check in UJFS Tcode whether you have file named newconversiontable.xlt and newtransformation.xlt in \ROOT\WEBFOLDERS\ADMINTEMPLATES.
Also can you check the Language settings of yours in Excel Option
Regards
Bhagyesh Ravange

Not able to create new paragraph format for copied layout of WESCHEINVERS3

hi all,
Iam facing one of the pecular problem I copied WESCHEINVERS3 into Zlayout from client 000.
when i tried to create new paragraph format I found the create element greyed out I have never seen this issue earlier.
May I know why the menu path paragraph->EDIT->create element is greyed out.
thanks

Hi,
U can create new paragraph formats, windows, character formats etc., only in original language of the FORM.. I guess u were trying to create a new paragraph format in 'EN' but the original language of form 'WESCHEINVERS3' is 'DE', so u can create the new paragaraph format in the copied Z form only in DE language.
Try to open the Z FORM in DE and create the Paragraph format...
Hope it helps!!
Rgds,
Pavan

Not able to create new domian name while sign up

Hi All, I am unable to create new domain name with the name of as I want . Kindly let me know how can I do this. Below is the error which occurs while user creation.
Please help me out I need to implement Windows Intune in my organization.
Thanks Shankar kumar

You can certainly try Shankar. You will find the telephone number you require here
http://support.microsoft.com/gp/customer-service-phone-numbers/en-ie
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Creating new TableSpace and shifting existing ....

I created a database but it is using the default tablespace. I want to create a new tablespace and want to configure existing database to use new tablespace. How to do this? The database is having enough records.

>>alter user scott default tablespace system; 
 
Assume the default tablespaces for users USER1 and 
USER2 are TS1 and TS2 respectively, specified 
explicitly during user creation. The current 
default tablespace for the database is TS2, but 
later, the database default tablespace is changed to 
TS1. Even though USER2's default tablespace was 
explicitly specified as TS2 
 
 
sys@ORCL> create user user1 identified by user1 default tablespace system;
User created.
Elapsed: 00:00:00.06
sys@ORCL> create user user2 identified by user2 default tablespace system;
User created.
Elapsed: 00:00:00.01
sys@ORCL> select property_value
2 from database_properties
3 where property_name = 'DEFAULT_PERMANENT_TABLESPACE';
PROPERTY_VALUE
USERS
Elapsed: 00:00:00.00
sys@ORCL> select default_tablesapce
2 from dba_users
3 where username
4
sys@ORCL> select username, default_tablespace
2 from dba_users
3 where username in ('USER1', 'USER2');
USERNAME DEFAULT_TABLESPACE
USER1 SYSTEM
USER2 SYSTEM
Elapsed: 00:00:00.01
sys@ORCL> alter database default tablespace example;
Database altered.
Elapsed: 00:00:00.01
sys@ORCL> select username, default_tablespace
2 from dba_users
3 where username in ('USER1', 'USER2');
USERNAME DEFAULT_TABLESPACE
USER1 SYSTEM
USER2 SYSTEM
Elapsed: 00:00:00.01
sys@ORCL> select property_value
2 from database_properties
3 where property_name = 'DEFAULT_PERMANENT_TABLESPACE';
PROPERTY_VALUE
EXAMPLE
Elapsed: 00:00:00.00
sys@ORCL>

Not able to create New BI Semantic Model Connection

Hi,
I am facing some issues in creating BI Semantic Model connection,It says below Error.
<contenttemplate>
There were errors found while validating the page:
Cannot connect to the server or database.
Please help me to fix these Error.
</contenttemplate>

Hi,
Now i am able to configure the BISM successfully but if i try to open the Create POWER view report i am getting these Error Message.
Error Message:-
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'http://cmfabduappd1vm5/sites/two/alnahari/PowerPivot%20Gallery/Sharepoint_MGEC.bism'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem
xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'http://cmfabduappd1vm5/sites/two/alnahari/PowerPivot%20Gallery/Sharepoint_MGEC.bism'. Verify that the connection information
is correct and that you have permissions to access the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.DataExtensions</Source><Message>The metadata discovery operation DISCOVER_CSDL_METADATA returned
invalid content. Verify that the connection string and permissions are correct.</Message></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>

Not able to create new user (account)

I would like to create a new user on my account, but when I click on the + sign I get no response. It is not grey'd out, and appears to be an option - the lock is open, and I am the adminstrator signed in as such(there is currently only one account on the compuer)
I've tried the obvious solutions like restarting. Any tips?
Thanks!

To confirm:
This is in reference to OS 10.3.9 user accounts - not iPod.
I didn't mean to post in this forum!

Not able to create new repository

H,
While creating the new repository under Virtaul Content Repository, i am getting follwing error. Please help
The Repository class: com.documentum.beaspi.webcache.WebCacheRepository is not a valid implementation. Please check your classpath.
I have put dmcmspi.jar in ear\EarContent\APP-INF\lib and domain\base_domain\lib folder but still I am getting this error.
Edited by: user11311969 on Sep 3, 2009 11:23 PM
Edited by: user11311969 on Sep 3, 2009 11:27 PM

I think that code will work with BEA weblogic 8.1 version. With weblogic 9.2 all the repository API's have changed. Unfortunately Documentum Content services have NOT upgraded their API's. So you cannot use this class anymore. I also tried using this class. If you have any further knowledge please share here..
Thanks
Sai Peddiboyna

Not able to create new disk or attach disk to windows 2008

Hi All,
Since a couple of days I cannot add any disk to my existing windows 2008 install.
I have added and 50 Gb disk but is does not exist once windows started (not in the disk management console)
The vm.cfg looks fine see:
[root@nlicm18 1235_w2008dct]# cat vm.cfg
acpi = 1
apic = 1
boot = 'c'
bootloader = '/usr/bin/pygrub'
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/var/ovs/mount/78DB9C7E6B8342C684E30AE500F4B9B9/running_pool/1235_w2008dct/System.img,hda,w',
'file:/var/ovs/mount/78DB9C7E6B8342C684E30AE500F4B9B9/running_pool/1235_w2008dct/apps.img,sda,w',
'file:/var/ovs/mount/78DB9C7E6B8342C684E30AE500F4B9B9/running_pool/1235_w2008dct/stage1211.img,hdd,w',
',hdc:cdrom,r',
disk_other_config = [['sda', 'ionice', 'sched=real-time,prio=4']]
kernel = '/usr/lib/xen/boot/hvmloader'
keymap = 'en-us'
maxmem = 3000
memory = 3000
name = '1235_w2008dct'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = 0
uuid = '2dcb31ac-3e1f-4f7a-9ad2-af2eef8e51ee'
vcpus = 1
vif = ['bridge=xenbr0,mac=00:16:3E:35:DC:6F,type=ioemu']
vif_other_config = []
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = 'xxxxxxxx'
vncunused = 1
The stage1211.img is the new disk, the apps disk added long time ago works fine and is visible.
I hope someone can help me out.
Thx,
Ronald

rrademak wrote:
Thanks for your reply, Yes I have already installed the drivers long time ago. There is already and extra disk added some time ago the apps.img disk which works fine.Try changing the disk name to "sdb" instead of "hdd"

Not able to create new repots and view existing reports.

Similar Messages

Maybe you are looking for