Not able to create service requests in E-Service

HI all,
I am unable to create service requests in the e-service scenario, after i enter all the data and press save button, it says that number is null.
There is no dump in the crm system.
I am able to create the same service request in CRM system and also can see these transactions in search list of e-service, but cant view them.
its giving an error message "An error occurred. The action that you requested could not be performed"
Regards,
Karunakar.

When i tried through DBCA it hanged...
through oradim it the posted error was appearing
I have all the privileges as i logged in as domain admin.
Oradim says it cannot create but the service has been created in services.msc but when i start the service the posted error message was appearing on the Eventlog

Similar Messages

  • We are not able to create CUP Requests

    HI all
    I am also gettting same error like this..We created CUP Requests one hour before ..But we are not able to create CUP Requests now.. I got below error message in system log.
    Risk analysis failed: Exception in getting the results from the web service : Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://c700u121.com:50000/SAPGRC_CCRiskAnalysis_V01/Config1?wsdl&style=document"
    2012-03-08 13:05:25,558 [SAPEngine_Application_Threadimpl:3]_23 ERROR com.virsa.ae.core.BOException: Exception in getting the results from the web service : Service call exception; nested exception is:
    com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://c700u121.com:50000/SAPGRC_CCRiskAnalysis_V01/Config1?wsdl&style=document"
    com.virsa.ae.core.BOException: Exception in getting the results from the web service : Service call exception; nested exception is:
    com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://c700u121.com:50000/SAPGRC_CCRiskAnalysis_V01/Config1?wsdl&style=document"
    at com.virsa.ae.accessrequests.bo.RiskAnalysisBO.findViolations(RiskAnalysisBO.java:199)
    at com.virsa.ae.accessrequests.bo.RiskAnalysisBO.findViolations(RiskAnalysisBO.java:80)
    at com.virsa.ae.accessrequests.bo.RequestBO.saveRiskAnalysis(RequestBO.java:4087)
    at com.virsa.ae.accessrequests.bo.RequestBO.saveNewRequest(RequestBO.java:408)
    at com.virsa.ae.accessrequests.actions.CreateRequestAction.createRequest(CreateRequestAction.java:381)

    Hello Naga!!
    Has your problem been solved??? Error Creating Request - Risk Analysis in CUP
    If yes, I'd be nice if you close this thread and document your solution
    If not, please let us know.
    Be aware that the user should set the Security Policy to "technical user" to avoid problems with password expiration as per note 1296696.
    Cheers!!
    Diego.

  • Not able to create meeting request in outlook using desktop connection

    Hi All,
      We installed the desktop connect professional edition and integrated MS outlook and CRM business activity.
    Our goal is to trigger an outlook meeting request (not an outlook appointment).
    We tried to configure this by creating a CRM business activity and syncing with outlook but does not seem to work.
    We are able to create an outlook appointment but not a meeting request.
    What we envision is the business activity needs to trigger a accept/reject/ reschedule meeting request functionality. Only when the user accepts the meeting request it should sync the outlook calendar / SAP calendar.
    Is this functionality available out-of-box or does it need enhancements to the interface ?
    Regards,
    S.Balaji

    Hi All,
      Closing the thread.
      Please refer this document for the Desktop Connection related queries.
      Desktop Connection for SAP CRM

  • Not able to create sales order  using BAPI - BAPI_SALESORDER_CREATEFROMDAT2

    Hi Experts,
    I am not able to create sales order . I am using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
    to create sales order .I am passing external sales order number to the parameter
    SALESDOCUMENTIN.
    I am getting following error.
    "524   |Only quantity 1 EA is allowed (Item 00001"
    Here EA is UOM(Unit of measurement).
    Below is the sample program through which i am trying to create the sales order.
    *& Report  ZSDC_SALES_TEST
    report  zsdc_sales_test.
    *DATA: wa_bapi_header    TYPE bapisdhd1.
    Include Name    - ZSDC_SALES_ORD_UPLOAD_TOP
    Program Name    - ZSDC_SALES_ORD_UPLOAD_1393
    Program Title   - Include for Data Declaration  and selection screen
    Created by      - Lalitha W
    Created on      - 18-Nov-2008
    Object ID       - SD_C_1393_SALES_ORDER_UPLOAD
    Request Id      - SD3K905579
    Description - This is a common INCLUDE for data declarations and
    *selection screen details.
                            HISTORY
    Date    |Developer |Req by    | Description              |Reference ID
            |          |          |                          |
            |          |          |                          |
                               TYPE-POOLS
    *TYPE-POOLS: truxs, abap, slis.
                              TABLES
    *TABLES: t100.
                               TYPES
    types:begin of   ty_header,
            auart(4)    type c,    " Sales Order Type
            vkorg(4)    type c,    " Sales Organization
            vtweg(2)    type c,    " Distrubution Channel
            spart(2)    type c,    " Division
            kunnr_1(10) type c,    " Sold to Party
            kunnr_2(10) type c,    " Ship to Party
            augru(3)    type c,    " Order Reason
            bstkd(35)   type c,    " PO Number
            bstdk(10)   type c,    " PO Date
            ketdat(10)  type c,    " Required Delivery Date
            zterm(4)    type c,    " Payment Terms
            inco1(3)    type c,    " Inco Terms -1
            inco2(28)   type c,    " Inco Terms -2
            prsdt(10)   type c,    " pricing date
            waerk(5)    type c,    " Document Currency
            vkbur(4)    type c,    " Sales Office
            vkgrp(3)    type c,    " Sales group
            pltyp(2)    type c,    " Price List type
            kdgrp(2)    type c,    " Customer Group
            bstkd_e(35) type c,    " Ship-to-party PO number
            submi(10)   type c,    " Collective Number
            bname(35)   type c,    " Name
            ihrez(12)   type c,    " Your Reference
            kschl_1(4)   type c,    " Condition Type
            kbetr_1(11)  type c,    " Amount
            kschl_2(4)   type c,    " Condition Type
            kbetr_2(11)  type c,    " Amount
            kschl_3(4)   type c,    " Condition Type
            kbetr_3(11)  type c,    " Amount
           partner_1(25) TYPE c,    "  Partner(Bill To Party Number)
           partner_2(25) TYPE c,    "  Partner(Payer Number)
           partner_3(25) TYPE c,    "  Partner(Sales Responsible Number)
           partner_4(25) TYPE c,    "  Partner(Order admin)
           partner_5(25) TYPE c,    "  Partner(Contact person)
            partner_1(10) type c,    "  Partner(Bill To Party Number)
            partner_2(10) type c,    "  Partner(Payer Number)
            partner_3(10) type c,    "  Partner(Sales Responsible Number)
            partner_4(10) type c,    "  Partner(Order admin)
            partner_5(10) type c,    "  Partner(Contact person)
            tdspras_1(2)  type c,
            text_1(500)   type c,    " Text Before Items Z012
            tdspras_2(2)  type c,
            text_2(500)   type c,    " Invocie Up Z034
            tdspras_3(2)  type c,
            text_3(500)   type c,    " Invocie Down Z035
            tdspras_4(2)  type c,
            text_4(500)   type c,    " Customer Reference Continue Z018
            tdspras_5(2)  type c,
            text_5(500)   type c,    " Dispatch Marks/ Order Z019
            tdspras_6(2)  type c,
            text_6(500)   type c,    " Ordered By  Z003
            tdspras_7(2)  type c,
            text_7(500)   type c,    " Sales Parameters Z002
            kvgr1(3)      type c,    " Industry
            kvgr2(3)      type c,    " customer BU
    end of ty_header.
    types: begin of ty_item,
              bstkd(35)     type c,    " PO Number
              bstdk(10)     type c,    " PO Date
              bstkd_e(35)   type c,    " Ship-to-party PO number
              posnr(6)      type c,    " POSTION NUMBER
              matnr(18)     type c,    " Material Number
              kwmeng(18)    type c,    " Order Quantity
              pstyv(4)      type c,    " Sales doc. item categ
              kursk(18)     type c,    " EXCHANGE RATE****
              ffprf(8)      type c,    " DIP PROFILE
              werks(4)      type c,    " Delivering Plant
              vstel(4)      type c,    " SHIPPING POINT
              lgort(4)      type c,    " STORAGE LOCATION
              route(6)      type c,    " Route
              kurrf(18)     type c,    " EXCHANGE RATE-FI
              ntgew(18)     type c,    " Net Weight
              brgew(18)     type c,    " Gross Weight
              gewei(3)      type c,    " Weight Unit
              prctr(10)     type c,    " profit center
              abgrs(6)      type c,    " RESULT ANALYSIS KEY
              kalsm_k(4)    type c,    " COSTING SHEET
              kschl_1(4)    type c,    " Condition Type
              kbetr_1(11)   type c,    " Amount
              kschl_2(4)    type c,    " Condition Type
              kbetr_2(11)   type c,    " Amount
              kschl_3(4)    type c,    " Condition Type
              kbetr_3(11)   type c,    " Amount
              text_1(500)    type c,    " material Text 0001
              tdspras_1(1)   type c,
              text_2(500)    type c,    " Pr Text 9001
              tdspras_2(1)   type c,
           end of ty_item.
    types:  begin of ty_schedule_line,
             bstkd(35)       type c, "PO number
             bstdk(10)       type c, "PO date
             bstkd_e(35)     type c, "Ship-to-party PO number
             posnr(6)        type c, "sales doc.Item
             etdat(10)       type c, "Schedule line date
             wmeng(2)        type c, "Order Quantity
            end of ty_schedule_line.
    types: begin of ty_err  ,
            auart(4)    type c,    " Sales Order Type
            vkorg(4)    type c,    " Sales Organization
            vtweg(2)    type c,    " Distrubution Channel
            spart(2)    type c,    " Division
            kunnr_1(10) type c,    " Sold to Party
            kunnr_2(10) type c,    " Ship to Party
            augru(3)    type c,    " Order Reason
            bstkd(35)   type c,    " PO Number
            bstdk(10)   type c,    " PO Date
            ketdat(10)  type c,    " Required Delivery Date
            zterm(4)    type c,    " Payment Terms
            inco1(3)    type c,    " Inco Terms -1
            inco2(28)   type c,    " Inco Terms -2
            prsdt(10)   type c,    " pricing date
            waerk(5)    type c,    " Document Currency
            vkbur(2)    type c,    " Sales Office
            vkgrp(3)    type c,    " Sales group
            pltyp(2)    type c,    " Price List type
            kdgrp(2)    type c,    " Customer Group
            bstkd_e(35) type c,    " Ship-to-party PO number
            submi(10)   type c,    " Collective Number
            bname(35)   type c,    " Name
            ihrez(12)   type c,    " Your Reference
            kschl_1(4)   type c,    " Condition Type
            kbetr_1(11)  type c,    " Amount
            kschl_2(4)   type c,    " Condition Type
            kbetr_2(11)  type c,    " Amount
            kschl_3(4)   type c,    " Condition Type
            kbetr_3(11)  type c,    " Amount
            partner_1(25) type c,    "  Partner(Bill To Party Number)
            partner_2(25) type c,    "  Partner(Payer Number)
            partner_3(25) type c,    "  Partner(Sales Responsible Number)
            partner_4(25) type c,    "  Partner(Order admin)
            partner_5(25) type c,    "  Partner(Contact person)
            tdspras_1(2)  type c,
            text_1(500)   type c,    " Text Before Items Z012
            tdspras_2(2)  type c,
            text_2(500)   type c,    " Invocie Up Z034
            tdspras_3(2)  type c,
            text_3(500)   type c,    " Invocie Down Z035
            tdspras_4(2)  type c,
            text_4(500)   type c,    " Customer Reference Continue Z018
            tdspras_5(2)  type c,
            text_5(500)   type c,    " Dispatch Marks/ Order Z019
            tdspras_6(2)  type c,
            text_6(500)   type c,    " Ordered By  Z003
            tdspras_7(2)  type c,
            text_7(500)   type c,    " Sales Parameters Z002
            kvgr1(3)      type c,    " Industry
            kvgr2(3)      type c,    " customer BU
            message(600) type c,
      end of ty_err.
    types: begin of ty_t685a,
            kschl type kschl,
            krech type krech,
          end of ty_t685a.
                       INTERNAL TABLES
    ***header
    data:  g_krech_1(4)    type c,    " Calculation type for condition
           g_krech_2(4)    type c,    " Calculation type for condition
           g_krech_3(4)    type c.    " Calculation type for condition
          g_krech_4(4)    TYPE c,    " Calculation type for condition
          g_krech_5(4)    TYPE c,    " Calculation type for condition
          g_krech_6(4)    TYPE c,    " Calculation type for condition
          g_krech_7(4)    TYPE c,    " Calculation type for condition
          g_krech_8(4)    TYPE c,    " Calculation type for condition
          g_krech_9(4)    TYPE c,    " Calculation type for condition
          g_krech_10(4)   TYPE c,    " Calculation type for condition
          g_krech_11(4)   TYPE c,    " Calculation type for condition
          g_krech_12(4)   TYPE c,    " Calculation type for condition
          g_krech_13(4)   TYPE c,    " Calculation type for condition
          g_krech_14(4)   TYPE c,    " Calculation type for condition
          g_krech_15(4)   TYPE c,    " Calculation type for condition
          g_krech_16(4)   TYPE c,    " Calculation type for condition
          g_krech_17(4)   TYPE c,    " Calculation type for condition
          g_krech_18(4)   TYPE c,    " Calculation type for condition
          g_krech_19(4)   TYPE c,    " Calculation type for condition
          g_krech_20(4)   TYPE c.    " Calculation type for condition
    Items
    data:   g_krech_item_1(4)   type c,    " Calculation type for condition
            g_krech_item_2(4)   type c,    " Calculation type for condition
            g_krech_item_3(4)   type c.    " Calculation type for condition
           g_krech_item_4(4)   TYPE c,    " Calculation type for condition
           g_krech_item_5(4)   TYPE c,    " Calculation type for condition
           g_krech_item_6(4)   TYPE c,    " Calculation type for condition
           g_krech_item_7(4)   TYPE c,    " Calculation type for condition
           g_krech_item_8(4)   TYPE c,    " Calculation type for condition
           g_krech_item_9(4)   TYPE c,    " Calculation type for condition
           g_krech_item_10(4)  TYPE c,    " Calculation type for condition
           g_krech_item_11(4)  TYPE c,    " Calculation type for condition
           g_krech_item_12(4)  TYPE c,    " Calculation type for condition
           g_krech_item_13(4)  TYPE c,    " Calculation type for condition
           g_krech_item_14(4)  TYPE c,    " Calculation type for condition
           g_krech_item_15(4)  TYPE c,    " Calculation type for condition
           g_krech_item_16(4)  TYPE c.    " Calculation type for condition
    data: it_t685a  type standard table of ty_t685a.
    data: wa_bapi_header    type bapisdhd1,
         wa_bapi_headerx   TYPE bapisdhd1x,
          it_bapi_item      type table of bapisditm,
         it_bapi_itemx     TYPE TABLE OF bapisditmx,
          it_bapi_cond      type table of bapicond,
         it_bapi_condx     TYPE TABLE OF bapicondx,
          it_bapi_partner   type table of bapiparnr,
          it_bapi_shdl      type table of bapischdl,
         it_bapi_shdlx     TYPE TABLE OF bapischdlx,
         it_bapi_order_text type TABLE OF BAPISDTEXT,
          it_bapireturn     type table of bapiret2.
    data:  wa_bapi_item       like line of it_bapi_item,
          wa_bapi_itemx      LIKE LINE OF it_bapi_itemx,
           wa_bapi_cond       like line of it_bapi_cond,
          wa_bapi_condx      LIKE LINE OF it_bapi_condx,
           wa_bapi_partner    like line of it_bapi_partner,
           wa_bapi_shdl       like line of it_bapi_shdl,
          wa_bapi_shdlx      LIKE LINE OF it_bapi_shdlx,
          wa_bapi_order_text like LINE OF it_bapi_order_text,
           wa_bapireturn      like line of it_bapireturn.
    *DATA: zmode(1) VALUE 'N'.
    data: it_header      type standard table of ty_header.
    *DATA: it_temp_header TYPE STANDARD TABLE OF ty_header.
    data: it_item        type standard table of ty_item.
    *DATA: it_temp_item   TYPE STANDARD TABLE OF ty_item.
    data: it_err         type standard table of ty_err.
    data: it_fline1 type standard table of tline,
          wa_fline1 type tline.
    data: it_thead1 type thead.
    data: it_fline2 type standard table of tline,
          wa_fline2 type tline.
    data: it_thead2 type thead.
    data: it_fline3 type standard table of tline,
          wa_fline3 type tline.
    data: it_thead3 type thead.
    data: it_fline4 type standard table of tline,
          wa_fline4 type tline.
    data: it_thead4 type thead.
    data: it_fline5 type standard table of tline,
          wa_fline5 type tline.
    data: it_thead5 type thead.
    data: wa_header         like line of it_header,
          wa_item           like line of it_item,
          wa_err            type ty_err,
         wa_bill           LIKE LINE OF it_bill,
         wa_bill1          LIKE LINE OF it_bill,
          wa_iterr          like line of it_err,
          wa_t685a          like line of it_t685a.
         wa_bill_item TYPE ty_bill_item.
    data: it_schedule_line  type standard table of ty_schedule_line,
          wa_schedule_line type ty_schedule_line.
    data: sales_order_no     type bapivbeln-vbeln.
    data: ext_sales_order_no type bapivbeln-vbeln.
    Variable to be used to separate the fields which are concatenated by a
    runtime character
    *DATA: g_tabchar(1) TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
    *DATA: wa_truxs_t_text_data TYPE truxs_t_text_data.
    *DATA: g_filename      TYPE string,
         g_path          TYPE string,
         g_fullpath      TYPE string,
         g_user_action   TYPE i,
         g_file_encoding TYPE abap_encoding.
    *DATA : g_text(8192),
    data : g_mstring1(100) type c,
          g_mstring2(100) type c,
          g_mstring3(100) type c,
          g_mstring4(100) type c,
          g_mstring5(100) type c.
    data: g_count1 type ebelp,
          g_str_count1(6) type c.
    data: g_count type ebelp,
          g_str_count(6) type c.
    *DATA: f_subrc      LIKE sy-subrc,
         f_subrc1     LIKE sy-subrc,
         f_error(500) TYPE c,
         item1(27)    TYPE c,
         item2(27)    TYPE c,
         item3(27)    TYPE c,
         item4(27)    TYPE c,
         i            TYPE ekpo-ebelp.
    *DATA: g_billplan_header TYPE c,
         g_billplan_item TYPE c.
    data : g_external_so type vbak-vbeln. "SO
                          SELECTION-SCREEN
    selection-screen begin of block frame1 with frame title text-001 .
    parameters:p_file1 type rlgrap-filename, "OBLIGATORY, "Header data.
               p_file2 type rlgrap-filename, "OBLIGATORY, "Item Data.
               p_file3 type rlgrap-filename,            "Schedule line.
               p_file4 type rlgrap-filename ."OBLIGATORY. "Error file.
    selection-screen end of block frame1.
    start-of-selection.
      wa_bapi_header-doc_type     =  'Z0MX'. "order type
      wa_bapi_header-sales_org    =  '0130'."sales org
      wa_bapi_header-distr_chan   =  '13'.  "distr channel
      wa_bapi_header-division     =  '13'.  "division
    Old code from copied program
    wa_bapi_header-purch_no_s   =  wa_header-kunnr_2.  " Ship to party
    New code as required in Finland project
    We are using to Header ->Order Tab -> Ship to Party -> Purchase order no (BSTKD_E) to store Old legacy SO number
      wa_bapi_header-purch_no_s   =  'MX100443'.  "External SO i.e Old legacey SO number
      wa_bapi_header-ref_1_s      = '0000666666'. "Sold to party
    wa_bapi_header-ord_reason   =  wa_header-augru.
      wa_bapi_header-purch_no_c   =  'ddr1234'.    " PO number
      wa_bapi_header-purch_date   =  sy-datum.    " PO date
      wa_bapi_header-req_date_h   =  sy-datum.   " Required Delivery Date
      wa_bapi_header-pmnttrms     =  '01'.    " Payment Terms
    wa_bapi_header-incoterms1   =  wa_header-inco1.
    wa_bapi_header-incoterms2   =  wa_header-inco2.
    wa_bapi_header-price_date   =  wa_header-prsdt.    " Pricing date
    wa_bapi_header-currency     =  wa_header-waerk.    " Document Currency
    wa_bapi_header-sales_grp  =  wa_header-vkgrp. " Sales group
    wa_bapi_header-price_list   =  wa_header-pltyp. " Price list type
    wa_bapi_header-cust_group   =  wa_header-kdgrp.   " Cust Group
    wa_bapi_header-ship_type    =  wa_header-vsart.   " Shipping Type
    wa_bapi_header-purch_no_s   =  wa_header-bstkd_e. " Ship-to-party po number
    wa_bapi_header-collect_no   =  wa_header-submi.   " Collective No.
    wa_bapi_header-name         =  wa_header-bname.   " Name
    wa_bapi_header-ref_1        =  wa_header-ihrez.   " Your Reference
    wa_bapi_header-cust_grp1    =  wa_header-kvgr1.   " Industry
    wa_bapi_header-cust_grp2    =  wa_header-kvgr2.   " Customer BU
    *ENDFORM.                    " f_header
    IF wa_header-partner_1 IS NOT INITIAL.
        wa_bapi_partner-partn_role = 'AG'.
        wa_bapi_partner-partn_numb = '0000666666'.
        wa_bapi_partner-itm_number = '000000'.
        append wa_bapi_partner to it_bapi_partner.
        clear wa_bapi_partner.
    ENDIF.
      call function 'CONVERSION_EXIT_ALPHA_INPUT'
        exporting
          input  = wa_header-partner_2
        importing
          output = wa_header-partner_2.
    IF wa_header-partner_2 IS NOT INITIAL.
        wa_bapi_partner-partn_role = 'WE'.
        wa_bapi_partner-partn_numb = '0000666666'.
        wa_bapi_partner-itm_number = '000000'.
        append wa_bapi_partner to it_bapi_partner.
        clear wa_bapi_partner.
    ENDIF.
      perform f_item.
    data : order_items_inx type table of bapisditmx with header line.
      order_items_inx-material          = 'X'.  "
      order_items_inx-target_qty        = 'X'.  "
      order_items_inx-comp_quant        = 'X'.  "
      order_items_inx-trgqty_den        = 'X'.
      order_items_inx-rnddlv_qty        = 'X'.
    order_items_inx-updateflag = 'I'.
    order_items_inx-target_qu = 'X'.
      order_items_inx-plant             = 'X'.  "
      append order_items_inx.
      call function 'BAPI_SALESORDER_CREATEFROMDAT2'
        exporting
          salesdocumentin = 'MX11111152'
      order_header_in      = wa_bapi_header
             order_header_inx     = wa_bapi_headerx
      importing
      salesdocument        = sales_order_no
      tables
      return               = it_bapireturn
      order_items_in       = it_bapi_item
      order_items_inx      =  order_items_inx
      order_partners       = it_bapi_partner
       order_conditions_in  = it_bapi_cond.
      if sy-subrc is initial.
      commit work.
      endif.
    *&      Form  f_item
          text
    form f_item .
      call function 'CONVERSION_EXIT_ALPHA_INPUT'
        exporting
          input  = wa_item-posnr
        importing
          output = wa_item-posnr.
      wa_item-posnr = '000010'.
    IF sy-subrc EQ 0. "IS INITIAL.
      move wa_item-posnr to g_str_count."commented out by shakti
    ENDIF.
      wa_bapi_item-itm_number        =  wa_item-posnr.  " Line item
    WA_BAPI_ITEM-PO_ITM_NO         =  WA_ITEM-EBELP.
    wa_bapi_item-division          = wa_item-spart.
      wa_bapi_item-purch_no_c        = 'ddr1234'.   " po number
      wa_bapi_item-purch_date        = sy-datum.   " po date
      wa_bapi_item-purch_no_s        = 'MX11111112'. " Ship-to-party po number
      wa_item-matnr = 'MAXIMO_SERVICE'.
      call function 'CONVERSION_EXIT_MATN1_INPUT'
        exporting
          input        = wa_item-matnr
        importing
          output       = wa_item-matnr
        exceptions
          length_error = 1
          others       = 2.
      if sy-subrc is initial.
        wa_bapi_item-material        = wa_item-matnr.  "material
      endif.
      wa_bapi_item-target_qty        = '1'. " Order qty
      wa_bapi_item-comp_quant = '1'.
      wa_bapi_item-target_qu = 'EA'.
        wa_bapi_item-fixed_quan = '1'.
    wa_bapi_item-comp_quant        = wa_item-kwmeng.
    wa_bapi_item-trgqty_den        = '1'.
    wa_bapi_item-rnddlv_qty        = wa_item-kwmeng.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
       EXPORTING
         input  = wa_item-ps_psp_pnr
       IMPORTING
         output = wa_item-ps_psp_pnr.
    IF sy-subrc = 0.
       wa_bapi_item-wbs_elem          = wa_item-ps_psp_pnr.
    ENDIF.
      wa_bapi_item-item_categ        = 'ZMAX'.
    wa_bapi_item-ex_rate_fi        = wa_item-kurrf.
    wa_bapi_item-dli_profil        = wa_item-ffprf.   " Dynamic item processor profile
    wa_bapi_item-route             = wa_item-route.   " route
    wa_bapi_item-exchg_rate        = wa_item-kursk.
      wa_bapi_item-plant             = '2090'.   " Plant
      wa_bapi_item-ship_point        = 'FN11'.   " Shipping point
    wa_bapi_item-store_loc         = wa_item-lgort.   " stg loc
    REPLACE ALL OCCURRENCES OF  ',' IN wa_item-ntgew WITH '.'.
    REPLACE ALL OCCURRENCES OF  ',' IN wa_item-brgew WITH '.'.
    wa_bapi_item-net_weight        = wa_item-ntgew.  "
    wa_bapi_item-gross_wght        = wa_item-brgew.  "
      call function 'CONVERSION_EXIT_CUNIT_INPUT'
        exporting
          input    = wa_item-gewei
          language = sy-langu
        importing
          output   = wa_item-gewei.
       EXCEPTIONS
         unit_not_found = 1
         OTHERS         = 2.
    IF sy-subrc <> 0.
    ENDIF.
      wa_bapi_item-untof_wght        =  'KG'.  " weight unit
      replace all occurrences of  ',' in wa_item-kursk with '.'.
      replace all occurrences of  ',' in wa_item-kurrf with '.'.
    wa_bapi_item-profit_ctr        = wa_item-prctr.   " Profit center
    wa_bapi_item-resanalkey        = wa_item-abgrs.   " RESULT ANALYSIS KEY
    wa_bapi_item-cstg_sheet        = wa_item-kalsm_k. " COSTING SHEET
      append wa_bapi_item to it_bapi_item.
    endform.                    " f_item
    Thanks & regards,
    Chetan

    see the following to create sales order:-
    *& Report  ZSALESORDER
    *&DEVELOPED BY JANI KRUPA 4.10.2008
    REPORT  ZSALESORDER.
    Parameters
    Sales document type
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
    PARAMETERS: p_auart TYPE auart OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Sales organization
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
    PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Distribution channel
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
    PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Division.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
    PARAMETERS: p_spart TYPE spart OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    SKIP 1.
    Sold-to
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
    PARAMETERS: p_sold  TYPE kunnr OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Ship-to
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
    PARAMETERS: p_ship  TYPE kunnr OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    SKIP 1.
    Material
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
    PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Quantity.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
    PARAMETERS: p_menge TYPE kwmeng  OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    Plant
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
    PARAMETERS: p_plant TYPE werks_d .
    SELECTION-SCREEN END OF LINE.
    Complete Deliver
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(20) v_text10 FOR FIELD p_autlf.
    PARAMETERS: p_autlf TYPE autlf DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    Data declarations.
    DATA: v_vbeln            LIKE vbak-vbeln.
    DATA: header             LIKE bapisdhead1.
    DATA: headerx            LIKE bapisdhead1x.
    DATA: item               LIKE bapisditem  OCCURS 0 WITH HEADER LINE.
    DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
    DATA: partner            LIKE bapipartnr  OCCURS 0 WITH HEADER LINE.
    DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
    DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                             WITH HEADER LINE.
    DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                             WITH HEADER LINE.
    DATA: lt_schedules_ink    TYPE STANDARD TABLE OF bapisdhead1
                             WITH HEADER LINE.
    Initialization.
    INITIALIZATION.
    v_text   = 'Order type'.
    v_text1  = 'Sales Org'.
    v_text2  = 'Distribution channel'.
    v_text3  = 'Division'.
    v_text4  = 'Sold-to'.
    v_text5  = 'Ship-to'.
    v_text6  = 'Material'.
    v_text7  = 'Quantity'.
    v_text9  = 'Plant'.
    v_text10 = 'Complete delivery'.
    Start-of-selection.
    START-OF-SELECTION.
    Header data
    Sales document type
      header-doc_type = p_auart.
      headerx-doc_type = 'X'.
    Sales organization
      header-sales_org = p_vkorg.
      headerx-sales_org = 'X'.
    Distribution channel
      header-distr_chan  = p_vtweg.
      headerx-distr_chan = 'X'.
    Division
      header-division = p_spart.
      headerx-division = 'X'.
      headerx-updateflag = 'I'.
    *Complete delivery
        header-COMPL_DLV = p_autlf.
        header-COMPL_DLV = 'X'.
    Partner data
    Sold to
      partner-partn_role = 'AG'.
      partner-partn_numb = p_sold.
      APPEND partner.
    Ship to
      partner-partn_role = 'WE'.
      partner-partn_numb = p_ship.
      APPEND partner.
    ITEM DATA
      itemx-updateflag = 'I'.
    Line item number.
      item-itm_number = '000010'.
      itemx-itm_number = 'X'.
    Material
      item-material = p_matnr.
      itemx-material = 'X'.
    Plant
      item-plant    = p_plant.
      itemx-plant   = 'X'.
    Quantity
      item-target_qty = p_menge.
      itemx-target_qty = 'X'.
    item category
      itemx-ITEM_CATEG = 'X'.
      APPEND item.
      APPEND itemx.
      ITEM DATA
      itemx-updateflag = 'I'.
    Line item number.
      item-itm_number = '000020'.
      itemx-itm_number = 'X'.
    Material
      item-material = p_matnr.
      itemx-material = 'X'.
    Plant
      item-plant    = p_plant.
      itemx-plant   = 'X'.
    Quantity
      item-target_qty = p_menge.
      itemx-target_qty = 'X'.
      APPEND item.
      APPEND itemx.
      Fill schedule lines
      lt_schedules_in-itm_number = '000010'.
      lt_schedules_in-sched_line = '0001'.
      lt_schedules_in-req_qty    = p_menge.
      APPEND lt_schedules_in.
      Fill schedule line flags
      lt_schedules_inx-itm_number  = '000010'.
      lt_schedules_inx-sched_line  = '0001'.
      lt_schedules_inx-updateflag  = 'X'.
      lt_schedules_inx-req_qty     = 'X'.
      APPEND lt_schedules_inx.
      Fill schedule lines
      lt_schedules_in-itm_number = '000020'.
      lt_schedules_in-sched_line = '0001'.
      lt_schedules_in-req_qty    = p_menge.
      APPEND lt_schedules_in.
      Fill schedule line flags
      lt_schedules_inx-itm_number  = '000020'.
      lt_schedules_inx-sched_line  = '0001'.
      lt_schedules_inx-updateflag  = 'X'.
      lt_schedules_inx-req_qty     = 'X'.
      APPEND lt_schedules_inx.
    Call the BAPI to create the sales order.
      CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
           EXPORTING
                sales_header_in     = header
                sales_header_inx    = headerx
           IMPORTING
                salesdocument_ex    = v_vbeln
           TABLES
                return              = return
                sales_items_in      = item
                sales_items_inx     = itemx
                sales_schedules_in  = lt_schedules_in
                sales_schedules_inx = lt_schedules_inx
                sales_partners      = partner.
    Check the return table.
      LOOP AT return WHERE type = 'E' OR type = 'A'.
        EXIT.
      ENDLOOP.
      IF sy-subrc = 0.
        WRITE: / 'Error in creating document'.
      ELSE.
    Commit the work.
        COMMIT WORK AND WAIT.
        WRITE: / 'Document ', v_vbeln, ' created'.
      ENDIF.

  • Not able to create interactive pdf

    Hello everyone,
    I'm not able to create an offline pdf using exclusively ABAP. I tried using the tutorial "Offline Interactive Forms Using ABAP" but i'm missing something. I allready created the form using transaction SFP, and my ABAP program is like this:
    REPORT ztest_interactive_forms.
    DATA: wa_lfa1 LIKE lfa1.
    DATA: fm_name TYPE funcname.
    DATA: fp_outputparams TYPE sfpoutputparams.
    DATA: fp_docparams TYPE sfpdocparams.
    DATA: fp_formoutput TYPE fpformoutput.
    PARAMETERS: p_lifnr LIKE lfa1-lifnr.
    START-OF-SELECTION.
    SELECT SINGLE lifnr name1 name2 ort01 FROM lfa1 INTO CORRESPONDING FIELDS OF wa_lfa1 WHERE lifnr = p_lifnr.
    first get name of the generated function module
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
    i_name = 'ZTEST_NCS'
    IMPORTING
    e_funcname = fm_name.
    Set output parameters and open spool job
    fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
    fp_outputparams-getpdf = 'X'. " launch print preview
    CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
    ie_outputparams = fp_outputparams
    EXCEPTIONS
    cancel = 1
    usage_error = 2
    system_error = 3
    internal_error = 4
    OTHERS = 5.
    Set form language and country (->form locale)
    fp_docparams-langu = 'E'.
    fp_docparams-country = 'US'.
    fp_docparams-fillable = 'X'.
    Now call the generated function module
    CALL FUNCTION fm_name
    EXPORTING
    /1bcdwb/docparams = fp_docparams
    vendor_data = wa_lfa1
    IMPORTING
    /1bcdwb/formoutput = fp_formoutput
    EXCEPTIONS
    usage_error = 1
    system_error = 2
    internal_error = 3
    OTHERS = 4.
    Close spool job
    CALL FUNCTION 'FP_JOB_CLOSE'
    EXCEPTIONS
    usage_error = 1
    system_error = 2
    internal_error = 3
    OTHERS = 4.
    When function module "fm_name" is called, variable fp_formoutput is returned blank (0 pages).
    Can anyone help or suggest something ?
    Thank you in advance,
    Nuno Santos

    Hi,
    The default export parameter is /1bcdwb/formoutput of type
    fpformoutput. This parameter has to be evaluated in the calling program if the
    resulting document needs to be handled by the program itself. Export parameters
    can be added only for those interfaces that are compatible with Smart Forms.
    There is also only one standard exporting parameter of the form's generated
    function module: /1bcdwb/formoutput of type fpformoutput. It contains three
    fields:
    . pdf: Contains the PDF data in hexadecimal form if parameter getpdf of
    function module FP_JOB_OPEN is set to 'X'. This is required if your
    program has a download functionality or if you want to pass on your PDF to
    Business Communication Service to fax or e-mail it.
    Detail information on Business Communication Service can be found in the
    SAP Library, Topic .Generic Business Tools for Application Developers
    (BC-SRV-GBT).. See also standard demo reports BCS_EXAMPLE_...
    . pdl: contains the PDL data in hexadecimal form if parameter getpdl of
    function module FP_JOB_OPEN is set to 'X'.
    . pages: returns the number of pages that have been printed.
    There is also only one standard exporting parameter of the form's generated
    function module: /1bcdwb/formoutput of type fpformoutput. It contains three
    fields:
    . pdf: Contains the PDF data in hexadecimal form if parameter getpdf of
    function module FP_JOB_OPEN is set to 'X'. This is required if your
    program has a download functionality or if you want to pass on your PDF to
    Business Communication Service to fax or e-mail it.
    Detail information on Business Communication Service can be found in the
    SAP Library, Topic .Generic Business Tools for Application Developers
    (BC-SRV-GBT).. See also standard demo reports BCS_EXAMPLE_...
    . pdl: contains the PDL data in hexadecimal form if parameter getpdl of
    function module FP_JOB_OPEN is set to 'X'.
    . pages: returns the number of pages that have been printed.
    Note:
    . getpdf: If set to 'X', the /1bcdwb/formoutput-pdf field of the form's generated
    function module will contain the PDF data in hexadecimal form. This is
    helpful for further processing the PDF file. A preview will not be possible if
    getpdf = 'X'
    Hope this will be helpfull.
    Regards
    Adil
    Edited by: Syed  Abdul Adil on Jun 17, 2008 4:23 PM
    Edited by: Syed  Abdul Adil on Jun 17, 2008 4:24 PM

  • Not able to create a universe when using nav. att. 0MATL_TYPE in the query

    Dear experts,
    A few days ago I posted a message in the BO General Category due to this error and I was adviced to install SP19 in BW (3.5). We've allready installed it but the issue is still arising. I am posting this thread now in this category since maybe the other category was too general and this one a little bit more specified.
    The error we are having is the following:
    We are having an issue when trying to create a universe over a BEx query which uses navigational attribute 0MATL_TYPE of 0MATERIAL (0MATERIAL__0MATL_TYPE).
    No matter where do we insert this nav. attribute in the query (lines, columns, free characteristics...) that we are not able to create the universe. We receive a message when trying to create it such as "error without message"
    We have other navigational attributes from several characteristics which are not giving us any problems in universes, just nav attributes 0MATL_TYPE and a Z characteristic (ZMATPR) which is the same as 0MATL_TYPE (it is defined the same way, not related).
    We are working with:
    BW 3.5 - SP19, BEx 3.x
    BOBJ XI 3.0 (without service pack or fix pack)
    Does any one have any clue on what could be the reason for this issue??
    Thanks in advance for your interest!
    Best regards!!!!
    Cecilia

    Hello Ingo,
    First of all thanks for your help, since we are really concerned about this issue.
    We have been analysing the file you have talked us about. The thing is that a week and a half ago we had to write an OSS message to SAP concerning another issue, and we were recommended to install note 1260004 which involves editing the registry in order to show SOFA logs, and if we have understood correcty, the file you have given us modifies as well the server registry in order to show sofa logs.
    Does the file you have given us includes new information in the SOFA logs, what is the difference between what we have changed with the SAP note and what you have given us?
    Nevertheless, we have retrieved two logs from two executions (having navigational attribute 0MATL_TYPE in the query from which we want to create the universe) in case you could help us to interpret the informations given since we are not able to understand it. (You can seen them below my signature.....haven't find a way to attach files....sorry....)
    Thank's very much in advance for your help!!!! This is so disconcerting.......
    Best regards!
    No way , I cannot copy the logs since the message format is destroyed when I copy it..... If you need it please inform me and we will send it to you!
    Thanks again for the help!!!
    Cecilia
    Edited by: Cecilia Guerra on May 11, 2009 1:56 PM
    Edited by: Cecilia Guerra on May 11, 2009 2:09 PM

  • Not able to create J2EE user DDIC in portal

    Hi All,
    I am trying to configure the BI 7.0  system in EP 7.0. My systems are running on Windows 2003 32 bit edition. SP level is SPS11 & SP10
    I have configured the UME where datasource is ABAP system. After using the supportdesk tool I am getting the below three erros in the system.
    Import of Web Templates in active version will fail because the J2EE user DDIC is not properly mapped to an ABAP user other than DDIC Maintain a user mapping for J2EE user DDIC - see note 945055 for details
    Check could not be executed because retrieval of WebAS ABAP settings failed Check connectivity to WebAS ABAP and make sure the ABAP coding correction from note 937697 is applied in the latest version available
    Check could not be executed because retrieval of WebAS ABAP settings failed Check connectivity to WebAS ABAP and make sure the ABAP coding correction from note 937697 is applied in the latest version available
    To resolve these issues i tried to create user id DDIC in portal but I am not able to create it. It is giving below error
    A user with the specified logon ID already exists; choose a different, unique logon ID
    As it is trying to create this user id in ABAP datasource. Please let me know how to create DDIC in J2EE engine where ABAP is the datasource.
    Please help me resolve this issue.
    Thanks,
    Shambo

    Hi,
    In defaulttrace.trc I am getting the below errors
    #1.5#00055D4A98DC0061000004BC00001610000460FCEAE15F00#1232539295495#com.sap.ip.bi.preexecutionservices.PreexecutionservicesRfcService#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.preexecutionservices.PreexecutionservicesRfcService#Administrator#9873####403302b0e7b311ddbd4500055d4a98dc#SAPEngine_Application_Thread[impl:3]_27##0#0#Fatal#1#/Applications/BI#Plain###Exception caught: com.sap.ip.bi.base.exception.BIBaseRuntimeException: SAX Exception
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: SAX Exception
         at com.sap.ip.bi.webapplications.runtime.preexecution.impl.PreexecutionDispatcher$DocumentAnalysis.createMutableDocument(PreexecutionDispatcher.java:93)
         at com.sap.ip.bi.webapplications.runtime.preexecution.impl.PreexecutionDispatcher.validateDocument(PreexecutionDispatcher.java:571)
         at com.sap.ip.bi.preexecutionservices.PreexecutionservicesRfcService.handleRequestForRSWR_PREEXECUTION_PROXY(PreexecutionservicesRfcService.java:109)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.handleServiceRequestGeneric(BIServicesRfcDispatcherService.java:283)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:177)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:235)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0_0.processFunction(PRTRFCRemoteObjectImpl0_0.java:118)
         at sun.reflect.GeneratedMethodAccessor299.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy119.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:284)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:254)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:59)(:main:, row=1, col=59) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:59)
         at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:139)
         at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
         at com.sap.ip.bi.webapplications.runtime.preexecution.impl.PreexecutionDispatcher$DocumentAnalysis.createMutableDocument(PreexecutionDispatcher.java:85)
         ... 28 more
    Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: Bad attribute list. Expected WhiteSpace, / or >:(:main:, row:1, col:59)
         at com.sap.engine.lib.xml.parser.XMLParser.scanAttList(XMLParser.java:1590)
         at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1710)
         at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2843)
         at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:165)
         at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
         at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
         at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
         at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
         ... 30 more
    #1.5#00055D4A98DC0061000004BF00001610000460FCEAE18738#1232539295511#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.base.application.message.impl.MessageBase#Administrator#9873####403302b0e7b311ddbd4500055d4a98dc#SAPEngine_Application_Thread[impl:3]_27##0#0#Error#1#/Applications/BI#Plain###A message was generated:
    ERROR
    Transformer exception while transforming BEx Web templates
    com.sap.ip.bi.deploytime.BISP2Jsp SAPXMLTransformer
    SAX Exception
    Transformer exception while transforming BEx Web templates
    com.sap.ip.bi.deploytime.BISP2Jsp SAPXMLTransformer
    SAX Exception#

  • Not able to create a message from satellite system

    Hello Everyone.
    We have been working on Solution Manager .We have managed with successfull installation,Uploaded required support packages,configured the system according to SAP Solution Manager Guide.
    Faced with some problem regarding support desk,we are not able to create a message from satellite system to Solution Manager.
    Note : Error Message related to this problem is ....
    <b>"Error in Local Message System : External number assignment, Enter notification num message was not Created."</b>
    Thanks in advance.
    Regards,
    Nimesh V . Master

    Hi, you need to check the number ranges for the notifications and make sure they are correct.  Look in the IMG of the SAP Solution Manager system for the instructions.  You also need to make sure that the Service Desk BC Sets are activated if you are NOT on 4.0 and SP Stack 09+.  In the later SPs much of this configuration from the IMG is automated in the wizard.

  • Not able to create a java class included in custom jar from script

    Hi,
    We need to call a third-party web service from within SAP Sourcing and so we have created and deployed a custom JAR. However I am not able to create any of the custom classes included in this object. I have created a simple JAR file having just a "Hello World" message and got our BASIS team to deploy this (they deployed using the steps mentioned in Installation Guide Section 4.2.4 - we are using Sourcing Wave 9). I have added the required import statement in my test script and included this line:
    HelloWorld test = new HelloWorld();
    When this script executes, it gives the error:
    Class:HelloWorld not found in namespace.
    Can you please give your suggestions on how to fix this error?
    Thanks,
    Gayathri

    The issue was fixed after including the custom jar in esourcing90/lib folder and redeploying

  • Getting an error prompt "the facebook server has returned an unknown error and is not able to fulfill your request. (2001)"

    Hi. I need help regarding facebook for blackberry. I cannot post any status update, i keep on receiving an error prompt "the facebook server has returned an unknown error and is not able to fulfill your request. (2001)".  it has been like this for the past 3 days. I already did the hard reboot many times, re-send service book though i do'nt think it's needed, and tried uninstalling and reinstalling the facebook application too but still getting the same error everytime i try to post a status update. I can comment to messages on my wall and other profiles, the news feed is updating in time too, i can also log-in and out to facebook with no problem, as well as other applications on my phone like foursquare, BBm, ubersocial, BB protect, BB app world, etc, are all working perfectly fine. And now I don't know what seems to be the problem.
    I've already contacted my network provider and told me that the error i'm getting is beyond their scope.
    Is anybody having the same problem as mine? 
    Can someone in BB support team help me regarding this issue and tell me what should I do?
    Thank you in advance. 

    I got the same issue !! Since I've updated my Facebook app 2 or 3 week ago !
    I can not  update my status and check-in ! It gives me "the facebook server has returned an unknown error and is not able to fulfill your request. (2001) "
    I can upload photo, put comment on people, like people status/picture. The news feed update perfectly !
    I also  tryied to uninstall reinstall the app, reboot etc etc ! I still can't update my status !!!! I've installed 3.0.0.17 this morning and the issue is still there...
    I've remarked one thing... On my facebook under "privacy setting/the Apps, Games and Websites" I used to have a "blackberry app" installed. It's not there anymore and I didn't remove it.
    I don't know how to reinstall it...

  • Not able to create customer master data with country code US

    Hey All,
    I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
    The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
    Request you to provide me with a solution.
    Thanks & Regards
    VK

    Hey all,
    I have checked the field in the account group(OBD2) but its in optional status
    and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
    so, do anyone know where exaclty we mention this number so that it populates in that field of address.
    hope am clear
    hope to receive  a solution
    thanks & regards
    vinila

  • I'm not able to create my apple id without my credit card number in my iphone 5c.there is no way to skip this step.there is no option like "NONE" to skip that step.kindly help me out.im unable to download even free apps

    i'm not able to create my apple id without my credit card number in my iphone 5c.there is no way to skip this step.there is no option like "NONE" to skip that step.kindly help me out.im unable to download even free apps

    See
    Why can’t I select None when I edit my Apple ID payment information?
    and
    Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
    Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
    Important: Before proceeding to the next step, you must download and install a free application. ...
    Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. …
    First you must download a free app from the App Store. When you are asked to sign in with your Apple ID, select "Create new account". Accept the terms and conditions checkbox, then click Continue. After you enter all the requested personal data, click Continue.
    When you are asked to select a payment method, select "None". 
    That's all there is to it.

  • Not able to Create WebService Model

    Hi All,
    I am trying to create Model using below WSDL file. I am not able to create model even it's not giving any error also.Even model also not appearing in the model section.
    How to check design time logs of the the NWDS studio.
    <u><b>WSDL</b></u>
    <wsdl:definitions xmlns:axis2="http://adcs.demo.com/traceanalysis/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:ns0="http://traceanalysis.dto.adcs.demo.com/xsd" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:ns1="http://adcs.demo.com/traceanalysis/xsd/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://adcs.demo.com/traceanalysis/">
      <wsdl:documentation>This service provides the logistics of a product's movement starting from shop floor, passing through various distributors till it most recent location. It retrieves this information based on grey market code of the product sorted by the scan date in descending order.</wsdl:documentation>
    <wsdl:types>
    <xs:schema xmlns:ax22="http://traceanalysis.dto.adcs.demo.com/xsd" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://traceanalysis.dto.adcs.demo.com/xsd">
      <xs:element name="TraceResultCollection" type="ax22:TraceResultCollection" />
    <xs:complexType name="TraceResultCollection">
    <xs:sequence>
      <xs:element name="logistics" nillable="true" type="ax22:Logistics" />
      <xs:element name="production" nillable="true" type="ax22:Production" />
      </xs:sequence>
      </xs:complexType>
      <xs:element name="Logistics" type="ax22:Logistics" />
    <xs:complexType name="Logistics">
    <xs:sequence>
      <xs:element maxOccurs="unbounded" name="movement" nillable="true" type="ax22:Movement" />
      </xs:sequence>
      </xs:complexType>
      <xs:element name="Movement" type="ax22:Movement" />
    <xs:complexType name="Movement">
    <xs:sequence>
      <xs:element name="customerNo" nillable="true" type="xs:string" />
      <xs:element name="greyMarketCode" nillable="true" type="xs:string" />
      <xs:element name="locationId" type="xs:int" />
      <xs:element name="scanDate" nillable="true" type="xs:string" />
      <xs:element name="shipmentNo" nillable="true" type="xs:string" />
      </xs:sequence>
      </xs:complexType>
      <xs:element name="Production" type="ax22:Production" />
    <xs:complexType name="Production">
    <xs:sequence>
      <xs:element name="batchNo" nillable="true" type="xs:string" />
      <xs:element name="gcasCode" nillable="true" type="xs:string" />
      <xs:element name="greyMarketCode" nillable="true" type="xs:string" />
      <xs:element name="locationId" type="xs:int" />
      <xs:element name="palletCode" nillable="true" type="xs:string" />
      <xs:element name="productionDate" nillable="true" type="xs:string" />
      <xs:element name="shipperCode" nillable="true" type="xs:string" />
      </xs:sequence>
      </xs:complexType>
      </xs:schema>
    <xs:schema xmlns:ns="http://adcs.demo.com/traceanalysis/xsd/" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://adcs.demo.com/traceanalysis/xsd/">
    <xs:element name="getTraceResultsFault">
    <xs:complexType>
    <xs:sequence>
      <xs:element name="getTraceResultsFault" type="xs:anyType" />
      </xs:sequence>
      </xs:complexType>
      </xs:element>
    <xs:element name="getTraceResults">
    <xs:complexType>
    <xs:sequence>
      <xs:element name="productGMC" nillable="true" type="xs:string" />
      </xs:sequence>
      </xs:complexType>
      </xs:element>
    <xs:element name="getTraceResultsResponse">
    <xs:complexType>
    <xs:sequence>
      <xs:element name="return" nillable="true" type="ns0:TraceResultCollection" />
      </xs:sequence>
      </xs:complexType>
      </xs:element>
      </xs:schema>
      </wsdl:types>
    <wsdl:message name="getTraceResultsMessage">
      <wsdl:part name="part1" element="ns1:getTraceResults" />
      </wsdl:message>
    <wsdl:message name="getTraceResultsResponse">
      <wsdl:part name="part1" element="ns1:getTraceResultsResponse" />
      </wsdl:message>
    <wsdl:message name="getTraceResultsFault">
      <wsdl:part name="part1" element="ns1:getTraceResultsFault" />
      </wsdl:message>
    <wsdl:portType name="TraceAnalysisServicePortType">
    <wsdl:operation name="getTraceResults">
      <wsdl:input xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" message="axis2:getTraceResultsMessage" wsaw:Action="urn:getTraceResults" />
      <wsdl:output message="axis2:getTraceResultsResponse" />
      <wsdl:fault message="axis2:getTraceResultsFault" name="getTraceResultsFault" />
      </wsdl:operation>
      </wsdl:portType>
    <wsdl:binding name="TraceAnalysisServiceSOAP11Binding" type="axis2:TraceAnalysisServicePortType">
      <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="getTraceResults">
      <soap:operation soapAction="urn:getTraceResults" style="document" />
    <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
    <wsdl:fault name="getTraceResultsFault">
      <soap:body use="literal" />
      </wsdl:fault>
      </wsdl:operation>
      </wsdl:binding>
    <wsdl:binding name="TraceAnalysisServiceSOAP12Binding" type="axis2:TraceAnalysisServicePortType">
      <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="getTraceResults">
      <soap12:operation soapAction="urn:getTraceResults" style="document" />
    <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
    <wsdl:fault name="getTraceResultsFault">
      <soap12:fault use="literal" name="getTraceResultsFault" />
      </wsdl:fault>
      </wsdl:operation>
      </wsdl:binding>
    <wsdl:binding name="TraceAnalysisServiceHttpBinding" type="axis2:TraceAnalysisServicePortType">
      <http:binding verb="POST" />
    <wsdl:operation name="getTraceResults">
      <http:operation location="getTraceResults" />
    <wsdl:input>
      <mime:content type="text/xml" />
      </wsdl:input>
    <wsdl:output>
      <mime:content type="text/xml" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    <wsdl:service name="TraceAnalysisService">
    <wsdl:port name="TraceAnalysisServiceSOAP11port_http" binding="axis2:TraceAnalysisServiceSOAP11Binding">
      <soap:address location="http://localhost:8080/adcs/services/TraceAnalysisService" />
      </wsdl:port>
    <wsdl:port name="TraceAnalysisServiceSOAP12port_http" binding="axis2:TraceAnalysisServiceSOAP12Binding">
      <soap12:address location="http://localhost:8080/adcs/services/TraceAnalysisService" />
      </wsdl:port>
    <wsdl:port name="TraceAnalysisServiceHttpport1" binding="axis2:TraceAnalysisServiceHttpBinding">
      <http:address location="http://localhost:8080/adcs/rest/TraceAnalysisService" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>
    Thanks in Adv
    -AW

    Check in WS Navigator to see if the service is working fine and post the error message.
    Regards
    Pranav

  • Not able to create function in ALBPM Studio 6.0

    Hi,
    I am trying to write a method that returns a string.
    But i keep on getting an error which says that return statement can only be present in functions.
    Now I tried all possible ways but i was not able to create a function.
    Could anyone please help me out with creating a function in ALBPM. else tell me how do i return a string from a method.

    Hi,
    I suspect you have written a method having String return type but the method does not have return statement.
    Go to the Catalogue component->BPM Object->Right click on the BPM object and select New Method->Give the method name. Now the method window will be opened. Go to the propertied tab of the right most panel. Set the return type as string. In the method window editor write your business logic. The below mentioned code is for sample one.
    String msg = "Hello World";
    return msg;
    Bibhu

  • Not able to see the request in ODS to activate

    Hi all,
    I have a content ODS, i scheduled a infopack and the data came in thru ok. But inorder to upload the data into the cube, i know i need to activate it before. But when i rightclick and go to activate data in the context menu .. there is a popup which shows all the request id's in the ODS. but i'm not able to see my request to activate it ... Is there some flag has to be set inorder to see the requests in the activation list? once its activated, I think all i need to do is "UPDATE ODS DATA TO DATAPROVIDER" as it is a standard content. Is there something else i need to do ..Pls guide.
    Now, I have a new problem, when i'm trying to see the transfer structure, it doesnt open and i get a msg
    Transfer method 'TRFC with PSA' is not supported by the source system
    Diagnosis
    The PSA transfer method is used to transfer data from source system CRM to transfer structure 0xxx_xx_xx_I_BB. Source system CRM does not support a PSA transfer.
    Procedure
    Define the PSA in the source system.
    Its actually a content one i installed and i didnt do any customizations to it... Shouldnt it work out of box? If no!! how can i define PSA in the source system.
    Any help is appreciated.
    Mav.

    Hi Mave,
    Kindly check the following:
    1.) Are you sure that the loading process finished successfully in the ODS? Kindly ensure it did.
    2.) Have you tried providing a longer <b>Date Range</b> in the <i>Request Display</i> (lower right).
    --Jkyle

  • Not able to create new e-mail on N8 using Mail for...

    Not able to create new e-mail on N8 using Mail for Exchange.
    Currently using google for my domain, but settings are the same as explained on the google Sync webpage: http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=147951
    When creating reply on mail the application crashes.  When creating new mail it says "Kan bewerking niet uitvoeren" in english: "Unable to execute action".
    Any idea why creating mail is not possible?
    Regards,
    Joris

    problem is known
    more info there:
    /t5/Nseries-and-S60-Smartphones/N8-syncing-with-Google-contacts-amp-calendar/td-p/772020
    there is little workaround aslo.

Maybe you are looking for

  • How can I back up my data eventhough my laptop doesn't start

    I use macbook pro and have upgraded it to OSX yosemite. Today it shown that the wifi does not function. I try to backup data but I cannot start the system. It shows the loading bar till half way and doesn't go further.I turned it off and started it a

  • How can I set Address Book to stop auto importing all addresses

    My Addresss Book seems to add any and all email addresses, willy nilly, from emails sent me. I have over 3000 entries , most of which are addresses I do not know. I want this to stop. What setting do I use? Where? I only want addresses which I decide

  • Help JApplet not co-operating

    Hello.. i have the following code which is just like a pulldown menu in an applet on the web. it wokrs fine (u can test it ) but whenever the mouse leaves the button the menuitems remains. i want to implement a mouse or focus action so that when the

  • PXIe deployment with errors

    Hello, I have been trying to run a program on my PXIe-1065 without success. I think I may be missing a driver or software, especifically LabVIEW Real-Time module on the host and DAQmx on the target which I both tried to install following this steps f

  • Any way to refresh the calendar?

    iPhone 3G with MS Exchange Email, Contacts & Calendars set to manual fetch ... In my mail Inbox, I can press the refresh button in the lower left to update the Inbox. Is there any way to do this in Calendar (other than changing my Fetch settings) or