Not able to delete Cube & DSO data

Hi Team,
I am trying to delete data request from upper & lower Data providers(cube & DSO respectivly).
Frst I tried to delete cube data using context menu option DeleteData.It generates dump "Time Exceeded". So I manually selected the request in cube manage & deleted.
Later when i try deleting DSO(that updates abv cube) data with context menu option gv similar dump so i manually tried deleting topmost req & it fails with following log.
Delete running: DataStore object FIGLO02B, from 304,053 to 304,053
Delete is scheduled; Selection conditions were substituted
FB RSM1_CHECK_DM_GOT_REQUEST called from PRG RSSM_PROCESS_REQUDEL_ODSO; row 000396
Request '304,054'; DTA 'FIGLO02B'; action 'D'; with dialog ''
Leave RSM1_CHECK_DM_GOT_REQUEST in row 70; Req_State ''
No records found for request ODSR_AKJPD3YPNDJMTLCTHHM0Z01VX in change log /BIC/B0000111000 of DataStore FIGLO02B
Deletion of request REQU_F1RX9B16C7MNKCHC4AYPLI0LP from data target FIGLO02B failed
Deletion of request REQU_F1RX9B16C7MNKCHC4AYPLI0LP from data target FIGLO02B failed
No records found for request ODSR_AKJPD3YPNDJMTLCTHHM0Z01VX in change log /BIC/B0000111000 of DataStore FIGLO02B
then i noted the cube data still nt deleted .Also this table /BIC/B0000111000 is empty.
Please suggest hw shall i delete data frm DSO & cube as i want to perform fresh init.

Hi
Try deleting the Data Requests from Tables.
Active Data /BIC/A<ODS_NAME>00
New Data /BIC/A<ODS_NAME>10 in BW 2.x /BIC/A<ODS_NAME>40 in BW 3.x
Change Log: search in table RSTSODS with the string "8<ODS_NAME>" in field ODSNAME, the name of Change Log is in field ODSNAME_TECH.
RSODSACT                       Activation of ODS M Records
RSODSACTREQ                    Activation table of M-request
RSODSO_REQUCPY                 Assigning Requests to Template
RSODSO_ROLLBACK                Table for Temporary Storage
RSODSO_RUNTIME                 Results of Runtime Measuremen
RSODSREQTSTMP                  Sorting of ODS Requests
RSODSSETTINGS                  Settings for an ODS
Hope ithelps

Similar Messages

Not able to delete all child data

Hi
I would like to delete all existing data in Child Form, but the below code is deleting just one record.
What am I missing here..
public void RemoveProcessFormChildData(long pKey, tcDataProvider tcdp){
          try
     tcFormInstanceOperationsIntf f = (tcFormInstanceOperationsIntf)tcUtilityFactory.getUtility(tcdp, "Thor.API.Operations.tcFormInstanceOperationsIntf");
     tcResultSet childFormDef = f.getChildFormDefinition(f.getProcessFormDefinitionKey(pKey),f.getProcessFormVersion(pKey));
     long childKey = childFormDef.getLongValue("Structure Utility.Child Tables.Child Key");
     String plChildTableName = childFormDef.getStringValue("Structure Utility.Table Name");
     logger.info("Child Key::"+childKey);
     logger.info("Child table name: "+plChildTableName);
     tcResultSet childFormData = f.getProcessFormChildData(childKey, pKey);
     logger.info("No. of records in Child Form::"+childFormData.getRowCount());
     for(int i=0;i<childFormData.getRowCount();i++)
          long plChildFormPrimaryKey = childFormData.getLongValue(plChildTableName + "_KEY");
          logger.info("Child Form Primary Key::"+plChildFormPrimaryKey);
          f.removeProcessFormChildData(childKey, plChildFormPrimaryKey);
     logger.info("After calling RemoveChildData()");
          catch(Exception e)
               logger.info("Exception Occured::"+e);
Thanks

forgot to add the below line :)
lookupRes.goToRow(i);

Not able to delete un wanted data source in configuration utility

Hi,
I am on 9.3 version,
I had some Un wanted data sources in my configuration utility and i deleted them but still i can see them, why is this happening?
Thanks

Does it say that the datasource has been deleted in the config utility, have you tried restarting the service.
If all fails then they may have to be manually remove from the planning system database.
Cheers
John
http://john-goodwin.blogspot.com/

I m trying to manage space in my iPhone but what I find is I m not able to delete document data alone of an application without deleting the entire application ... Any other suggestions or methods to accompanish this? Any pointers welcome... Is this a bug

I m trying to manage space in my iPhone but what I find is I m not able to delete document data alone of an application without deleting the entire application ... Any other suggestions or methods to accompanish this? Any pointers welcome... Is this a bug

You mean take the cover off of the iPhone, to look inside? I'd recommend against it. Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
Other than that, any repair/service options are going to cost money. You might want to see if a wireless carrier will let you get a new contract & phone.
Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider? Did I understand that correctly?

I am not able to delete my files.

I am not able to delete my files. When I delete file It ask me for password, and then It delete from system but hard does not show any free space that must be created when I delete some file. Please help me.

After deleting ,no data is going trash.
I am getting this problem from 3 three days. Rebooting system is not working. It seems like that when I delete file its move to some other location.
If it is security feature then please tell me how can I change it?

Not able to delete inbound delivery.

Hi Gurus,
Please help me delete inbound delivery. I have a ticket where user is not able to delete inbound delivery. I tried to delete this delivery and I’m also getting the same errors that user is getting.
I have tried to insert real screen shots from production system in this post to give a better understanding of the scenario.
The situation is: PO was created for 2 line items for same material but different batch, for different quantities.
For line item 1:
1.      Two separate partial deliveries were received along with 1 delivery note each, for quantities 14,957.130 KG and 855.017 KG.
2.      Goods issue was posted for both quantities.
3.      Invoice receipt was done for both quantities.
4.      Goods receipt was done for both quantities.
5.      However, goods receipt was later reversed for quantity 14,957.130 KG.
Screenshots Line item 1
For line item 2:
1.      One delivery was received for full quantity of 292.112 KG.
2.      Goods issue was posted for same quantity.
3.      Invoice receipt was posted for same quantity.
4.      Goods receipt was posted for same quantity.
5.      However, goods receipt was later reversed for full quantity.
Inbound Delivery screens below:
Error VL32N screen
Message in VL09 when trying to reverse goods movement with reference to inbound delivery:
Please tell me how can this inbound delivery be deleted?
Points will be awarded for right help.
Thank you for viewing.

Hi
BV Yadav:
1. it's the business user who posted the invoice, and posted goods issue the was it appears in PO history. i'm not sure how they did it.
Kamlesh: I tried both, changing the document date and delivery date to current. i still got same error. still not able to delete inbound delivery.
Tomas Figura: Puaway QTY is already 0. this field is blank, nothing in it. pic below:
Note: someone has suggested to follow the process to reverse as many postings that have been done against the PO as possible and ultimately delete the PO, this will break all links between PO and inbound, outbound deliveries. and hence, there won't be a need to delete inbound delivery anymore. then the business user can start the brand new process from scratch by creating a new PO, create a new outbound, inbound deliveries, and all. what do you guys think of it? Please comment.
Thank you guys.

ODS request not able to delete very urgent

Hi All,
I am loading the data from r/3 system to bw (bi 7.0), the objct is Obpartner master data loading into this data targets are 0bp_o01, 0bpartner. there is no further loads.
while loading the delta load i am getting error message like " last delta not updated, repeat the last delta' .while i am checking in the monitor scree the request it's showing red , but in the data targets the request are showing green colour.
Note - i tried to chnge the status from green to red but it's not allwoing to change the status because " the requeest is partially activated u can't chage the status".
in the data targets i am trying to delete the the request but i am not able to delete the request, while selected request only for deletion it's asking for rollback.if u click on continue rollback all request will be going to delete.
please advise me is there any way to delete the request , i will assign the full points for right answer.
hi all,
there is no further loads , while i am trying to change
it's giving message like " the request is partially activated u con't update".
i think there is one procedure but i am not sure about
that one in se16 we can give the rsodsactreq. is it possible to delete the request here....
please advise if anybody knows.......
thanks
kk
Message was edited by:
kk

Hi ,
This should work ..
The request cannot be deleted in the administration of the data target, make sure that there is no data in the activation queue of the ODS for this request. If there is data nevertheless, make sure that table rsodsactreq contains all entries for this request and ODS in the operation field has the value 'U'. If this is the case, use transaction SE16 to delete all entries for this request and ODS object from tables rsiccont, rsmonicdp and rsodsactreq. Then set the 'from date' to a value that is older than the oldest loaded request in this ODS in the administration of the data target and choose 'Refresh'. This corrects the administration. The data in the activation queue does not cause a problem, it is deleted the next time all new requests are activated.
Regards
pavan
appreciate with points if it helps

Not Able To Delete Master Agreements/Sub Agreements

Hello Everybody,
I have to delete a Master Agreement or Sub Agreement. The Help sections says that in order to be able to delete a MA/SA the following conditions should be met :
1) The current date should be greater than end date.
2) The current date should be greater than the Retention Date
3) The document should not be flagged as perpetual.
My document meets all the above conditions but when I try to delete it, I get a pop-up saying that the 'Document could not be deleted. It has been restored to its previous version'. I checked the log and it didn't help much. The Error there was 'Unable to delete the document'.
Now, here is the best part : I have a validation script that runs on a MA. If I make that script inactive, the document gets deleted. When I make it Active, I am not able to delete the document. The script, independently, runs without any error but seems to be generating exceptions here.
I am not sure why the system behaves this way. Any help is appreciated.
Thanks In Advance,
Devesh

Erik,
Thanks for the reply.
We have actually tried the approach you are suggesting before posting this thread. I wrote a similar logic to see whether the checkbox is checked and then delete it. But it was not of any help.
The same problem occurs. But the moment I make the script inactive things work now.
So, as of now, the problem is still there.
Thanks
Devesh

Not able to delete file from external hard disk

I connected my external hard disk to my macbook pro. But am not able to delete any file since it says the file cannot be deleted when I move it to trash. Could you let me know how to delete a file from the external hard disk?

How is your HDD formatted? NTFS? FAT?
Did you write files with rights? When you strike +I on any file, you can see its rights; if you're read-only, you may change your file's rights.

I changed my Apple ID that using an invalid email address to a new one and I am trying to update iCloud account on iPhone5 with iOS 7.1.2, and I am not able to delete iCloud account without the old password.

I changed my Apple ID that using an invalid email address and I am trying to update iCloud account with my new Apple ID on iPhone 5 with iOS 7.1.2. I am not able to delete iCloud account without the old password. Is there a way to update the Apple ID of my iCloud account?

Many people are having probalems with this right now. The only solution I've seen that seems to consistently work is the one posted by Brackers28 here: https://discussions.apple.com/message/23020591#23020591. This only works if you still have access to your old email account. If you don't, you'll have to have Apple help you reset the password for your old account so you can turn off Find My iPhone and sign into your account with your correct ID.

Not able to delete emails from Shared mailbox

Hello Team,
I have a mailbox which is shared. User A is having access on that mailbox.
I have added That mailbox as additional Mailbox. when i click on delete button or right click delete i am not able to delete that messages and from any folder.
I have configured User A profile on multiple system and in each and every system i am not able to delete emails
I am using O365 business plan and my Outlook is professional plus with latest update
I removed the mailbox which is shared and added that account as Multi Ex so i am able to delete it
I am running scripts in background so i dont want to add that mailbox as Multi Ex(By going into account settings and adding new email with credentials)
I have given full access to User A on that mailbox on the portal. I removed the access and then re added the access and then also i am not able to delete emails
I have tried safe mode
I have tried online mode
I have tried cached mode
I have tried Right clicking folder for example Inbox and given User A as owner permission from outlook.
I have done the same method of giving permission from OWA
If i open Mailbox in OWA by logging in Using User A and then clicking another user's mailbox and opening mailbox which is shared and i am able to delete emails there.

Exchange doesn't do that. POP3 is a single mailbox client mail retrieval protocol, not a mail transport protocol.
Any attempt to use it as a mail transport protocol is a great big kludge.
Exchange is designed to connect to the Internet using SMTP.
Small Business Server includes a POP mail puller, but I don't recommend it because, again, it's a great big kludge.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Not able to delete some of the pages in subpage

Hi,
I am not able to delete some of the subpages in a pagegroup and it gives the following error mentioned below can any one shed some light so that it can be fixed.
the error that surprised me during the page deletion is
Internal error (WWC-00006)
Error while deleting page. (WWC-44130)
Unexpected error - User-Defined Exception (WWC-35000)
Unexpected error - User-Defined Exception (WWC-35000)
Path ID does not exist. (WWC-50001)
this is the same problem with some of the pages is the same page group but a different set of subpages.
My portal version is 10.1.2.0.2 (Build: 150).
it would be very nice of them if any one could give me a solution for this.
Best Regards,
Vijay.

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh

Not able to create customer master data with country code US

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
Request you to provide me with a solution.
Thanks & Regards
VK

Hey all,
I have checked the field in the account group(OBD2) but its in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
so, do anyone know where exaclty we mention this number so that it populates in that field of address.
hope am clear
hope to receive a solution
thanks & regards
vinila

I had an unauthorized purchase on my old apple ID so I created a new one since the old one had been deactivated and now I cannot update any of my apps, I have read that the apps will be tied to the old account but I do not want to delete/lose their data

I had an unauthorized purchase on my old apple ID so I created a new one since the old one had been deactivated and now I cannot update any of my apps, I have read that the apps will be tied to the old account but since the old one was deactivated I cant update them and I do not want to delete/lose their data, re download, and start all over again. Is there anyway to go around this issue?
thanks

Ask Apple to re-enable it. I had an unauthorized purchase last October. They disabled my account until the problem was solved. However, I asked them to reopen it, and they just asked me to provide some security information (billing address, a recent purchase you made, etc.), and then they re-enabled it.

Not able to delete Cube & DSO data

Similar Messages

Maybe you are looking for