Not Able To Delete Master Agreements/Sub Agreements

Hello Everybody,
I have to delete a Master Agreement or Sub Agreement. The Help sections says that in order to be able to delete a MA/SA the following conditions should be met :
1) The current date should be greater than end date.
2) The current date should be greater than the Retention Date
3) The document should not be flagged as perpetual.
My document meets all the above conditions but when I try to delete it, I get a pop-up saying that the 'Document could not be deleted. It has been restored to its previous version'. I checked the log and it didn't help much. The Error there was 'Unable to delete the document'.
Now, here is the best part : I have a validation script that runs on a MA. If I make that script inactive, the document gets deleted. When I make it Active, I am not able to delete the document. The script, independently, runs without any error but seems to be generating exceptions here.
I am not sure why the system behaves this way. Any help is appreciated.
Thanks In Advance,
Devesh

Erik,
Thanks for the reply.
We have actually tried the approach you are suggesting before posting this thread. I wrote a similar logic to see whether the checkbox is checked and then delete it. But it was not of any help.
The same problem occurs. But the moment I make the script inactive things work now.
So, as of now, the problem is still there.
Thanks
Devesh

Similar Messages

I am not able to find the agree button in the terms and conditions agreement in my new iphone 5

i am not able to find the agree button in the terms and conditions agreement in my new iphone 5

Hi
I managed to resolve this. See my solution for this other poster:
https://discussions.apple.com/message/23058902#23058902

ODS request not able to delete very urgent

Hi All,
I am loading the data from r/3 system to bw (bi 7.0), the objct is Obpartner master data loading into this data targets are 0bp_o01, 0bpartner. there is no further loads.
while loading the delta load i am getting error message like " last delta not updated, repeat the last delta' .while i am checking in the monitor scree the request it's showing red , but in the data targets the request are showing green colour.
Note - i tried to chnge the status from green to red but it's not allwoing to change the status because " the requeest is partially activated u can't chage the status".
in the data targets i am trying to delete the the request but i am not able to delete the request, while selected request only for deletion it's asking for rollback.if u click on continue rollback all request will be going to delete.
please advise me is there any way to delete the request , i will assign the full points for right answer.
hi all,
there is no further loads , while i am trying to change
it's giving message like " the request is partially activated u con't update".
i think there is one procedure but i am not sure about
that one in se16 we can give the rsodsactreq. is it possible to delete the request here....
please advise if anybody knows.......
thanks
kk
Message was edited by:
kk

Hi ,
This should work ..
The request cannot be deleted in the administration of the data target, make sure that there is no data in the activation queue of the ODS for this request. If there is data nevertheless, make sure that table rsodsactreq contains all entries for this request and ODS in the operation field has the value 'U'. If this is the case, use transaction SE16 to delete all entries for this request and ODS object from tables rsiccont, rsmonicdp and rsodsactreq. Then set the 'from date' to a value that is older than the oldest loaded request in this ODS in the administration of the data target and choose 'Refresh'. This corrects the administration. The data in the activation queue does not cause a problem, it is deleted the next time all new requests are activated.
Regards
pavan
appreciate with points if it helps

LSO-AE not able to delete content

Hi
I am not able to delete the WBT course content in the Authoring environment. I was given u201Cfull controlu201D as a permission to master repository folder. I hope this permission allow me to delete the content. However, the content is not getting deleted from the master repository. The steps I followed to delete the content is as follows:
Authoring environment- select the published object-right click-select delete.
System is displaying the following message when I try to delete the content.
u201CYou are not allowed to delete the course which was checked inu201D
Thanks in advance
Robin

Hi,
Content - > Course - > Participant.
If a course is assigned to this content , it will be stored in hrp5006 table and if a participant has taken this course , he acquires the qual(hrp1001).So try this workaround by deleting this entry in hrp1001 and hrp5006 and then try deleting the content from the authoring tool.
Thanks
Edited by: Felix on Sep 4, 2009 1:30 PM

Not able to see Master Rule Collection

hi Experts,
I m creating Portal Desktop by following one PDF, According to that PDF i created defulat framwork page and portal theme after that desktop and i have created one rule collection after that in desktop i have assigned default framwork and theme,
but in last step i m not able to see Master Rule collection .
Portal Content > Portal Administrators > Super Administrators > Master Rule Collection.
how m able to see this and what r the other steps required for creating desktop.
Thanks and regards
Trilochan

In your Rule you "Add IF Expression"
IF -> User = * -> Button Apply
Then -> Portal desktop = <Your Desktop PCD> -> Button Apply
In Main Rule "Add IF Expression" (No Delete de default configuration)
IF -> User = <Your User> -> Button Apply
Then -> Rule Collection = <Your Rule PCD> ->Button Apply
OBS: Take Care of this configuration. First Check this with your user (Not use the Administrator User), if everythink ok, Than you change for a determinate group, user, role.....
Regards
Eduardo
Edited by: Eduardo Grilo on Oct 23, 2008 1:21 PM
Edited by: Eduardo Grilo on Oct 23, 2008 1:23 PM

Not able to delete file from external hard disk

I connected my external hard disk to my macbook pro. But am not able to delete any file since it says the file cannot be deleted when I move it to trash. Could you let me know how to delete a file from the external hard disk?

How is your HDD formatted? NTFS? FAT?
Did you write files with rights? When you strike +I on any file, you can see its rights; if you're read-only, you may change your file's rights.

I changed my Apple ID that using an invalid email address to a new one and I am trying to update iCloud account on iPhone5 with iOS 7.1.2, and I am not able to delete iCloud account without the old password.

I changed my Apple ID that using an invalid email address and I am trying to update iCloud account with my new Apple ID on iPhone 5 with iOS 7.1.2. I am not able to delete iCloud account without the old password. Is there a way to update the Apple ID of my iCloud account?

Many people are having probalems with this right now. The only solution I've seen that seems to consistently work is the one posted by Brackers28 here: https://discussions.apple.com/message/23020591#23020591. This only works if you still have access to your old email account. If you don't, you'll have to have Apple help you reset the password for your old account so you can turn off Find My iPhone and sign into your account with your correct ID.

Not able to delete emails from Shared mailbox

Hello Team,
I have a mailbox which is shared. User A is having access on that mailbox.
I have added That mailbox as additional Mailbox. when i click on delete button or right click delete i am not able to delete that messages and from any folder.
I have configured User A profile on multiple system and in each and every system i am not able to delete emails
I am using O365 business plan and my Outlook is professional plus with latest update
I removed the mailbox which is shared and added that account as Multi Ex so i am able to delete it
I am running scripts in background so i dont want to add that mailbox as Multi Ex(By going into account settings and adding new email with credentials)
I have given full access to User A on that mailbox on the portal. I removed the access and then re added the access and then also i am not able to delete emails
I have tried safe mode
I have tried online mode
I have tried cached mode
I have tried Right clicking folder for example Inbox and given User A as owner permission from outlook.
I have done the same method of giving permission from OWA
If i open Mailbox in OWA by logging in Using User A and then clicking another user's mailbox and opening mailbox which is shared and i am able to delete emails there.

Exchange doesn't do that. POP3 is a single mailbox client mail retrieval protocol, not a mail transport protocol.
Any attempt to use it as a mail transport protocol is a great big kludge.
Exchange is designed to connect to the Internet using SMTP.
Small Business Server includes a POP mail puller, but I don't recommend it because, again, it's a great big kludge.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Not able to delete some of the pages in subpage

Hi,
I am not able to delete some of the subpages in a pagegroup and it gives the following error mentioned below can any one shed some light so that it can be fixed.
the error that surprised me during the page deletion is
Internal error (WWC-00006)
Error while deleting page. (WWC-44130)
Unexpected error - User-Defined Exception (WWC-35000)
Unexpected error - User-Defined Exception (WWC-35000)
Path ID does not exist. (WWC-50001)
this is the same problem with some of the pages is the same page group but a different set of subpages.
My portal version is 10.1.2.0.2 (Build: 150).
it would be very nice of them if any one could give me a solution for this.
Best Regards,
Vijay.

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh

I am not able to delete my files.

I am not able to delete my files. When I delete file It ask me for password, and then It delete from system but hard does not show any free space that must be created when I delete some file. Please help me.

After deleting ,no data is going trash.
I am getting this problem from 3 three days. Rebooting system is not working. It seems like that when I delete file its move to some other location.
If it is security feature then please tell me how can I change it?

Not able to delet the order

hi friends
I am not able to delet maintenance order. I have the following error message when I try to. What should I do? Thanks.
Balance of ORD 1000006902 is not zero
Message no. KO115
Diagnosis
The balance on object ORD 1000006902 is not zero. That is, there are still costs on the object.
System Response
The object cannot be closed and the deletion flag must not be set.
Procedure
Settle the object before you close it or set the deletion flag.
I have tried to settle the order with transaction KO88 (single order settlement) . i am getting message
There are no accrued amounts; settlement is not possible.

Hello WISH,
i guess you have to repost the cost of the internal order to another internal order (probably of the header level) before you can delete the internal order.
Kind regards

Not able to delete inbound delivery.

Hi Gurus,
Please help me delete inbound delivery. I have a ticket where user is not able to delete inbound delivery. I tried to delete this delivery and I’m also getting the same errors that user is getting.
I have tried to insert real screen shots from production system in this post to give a better understanding of the scenario.
The situation is: PO was created for 2 line items for same material but different batch, for different quantities.
For line item 1:
1.      Two separate partial deliveries were received along with 1 delivery note each, for quantities 14,957.130 KG and 855.017 KG.
2.      Goods issue was posted for both quantities.
3.      Invoice receipt was done for both quantities.
4.      Goods receipt was done for both quantities.
5.      However, goods receipt was later reversed for quantity 14,957.130 KG.
Screenshots Line item 1
For line item 2:
1.      One delivery was received for full quantity of 292.112 KG.
2.      Goods issue was posted for same quantity.
3.      Invoice receipt was posted for same quantity.
4.      Goods receipt was posted for same quantity.
5.      However, goods receipt was later reversed for full quantity.
Inbound Delivery screens below:
Error VL32N screen
Message in VL09 when trying to reverse goods movement with reference to inbound delivery:
Please tell me how can this inbound delivery be deleted?
Points will be awarded for right help.
Thank you for viewing.

Hi
BV Yadav:
1. it's the business user who posted the invoice, and posted goods issue the was it appears in PO history. i'm not sure how they did it.
Kamlesh: I tried both, changing the document date and delivery date to current. i still got same error. still not able to delete inbound delivery.
Tomas Figura: Puaway QTY is already 0. this field is blank, nothing in it. pic below:
Note: someone has suggested to follow the process to reverse as many postings that have been done against the PO as possible and ultimately delete the PO, this will break all links between PO and inbound, outbound deliveries. and hence, there won't be a need to delete inbound delivery anymore. then the business user can start the brand new process from scratch by creating a new PO, create a new outbound, inbound deliveries, and all. what do you guys think of it? Please comment.
Thank you guys.

Not able to delete line items using BAPI_OUTB_DELIVERY_CHANGE

Hi,
    Not able to delete line items of a delivery using BAPI 'BAPI_OUTB_DELIVERY_CHANGE', with thte below code and even return parameter has zero messages.
I have even checked existing below posting.
https://www.sdn.sap.com/irj/scn/logon?redirect=http%3a%2f%2fforums.sdn.sap.com%2fthread.jspa%3fthreadid%3d782509
Below is the code that i am using.........
*wa1-deliv_numb = wa_lips-vbeln.
wa1-deliv_item = wa_lips-posnr.
APPEND wa1 to item_data.
wa-deliv_numb = vbeln_so .
wa-deliv_item = l_item.
wa-del_item = 'X'.
APPEND wa TO item_control.
w_header_data-deliv_numb = vbeln_so .
w_header_control-deliv_numb = vbeln_so .
w_delivery = vbeln_so .
*w_header_control-dlv_del = 'X'. "Delete whole Delivery
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
    header_data    = w_header_data
    header_control = w_header_control
    delivery       = w_delivery
TABLES
   item_data      = item_data
    item_control   = item_control
    return         = return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = 'X'.
I have even tried uncommenting item_data parameter but not able to delete line item.....i am able to delete whole delivery but not line items .........can any one of u help me in resolving this issiue plz ???
Regards,
M, Manohar

Kindly use WS_DELIVERY_UPDATE to delete the items
Sample code:
L_VBKOK-VBELN_VL = vbeln_so.
clear l_vbpok.
         refresh l_vbpok.
         l_vbpok-vbeln_vl = vbeln_so
         l_vbpok-posnr_vl = wa_deliv_item.
         l_vbpok-lips_del = c_x.
         append l_vbpok.
         set update task local.
         call function 'WS_DELIVERY_UPDATE'
           exporting
             vbkok_wa = l_vbkok
             commit   = ' '
             delivery = lv_delivery
           tables
             vbpok_tab = l_vbpok
           exceptions
             others   = 0.
         commit work and wait.

Not able to delete a delivery after revenue recognition is reversed

Hello Gurus,
We have a situation for certain Sales Order types after creation of Sales Order -> Delivery and PGI, we do revenue recognition. But there was some mistake and delivery needed to be deleted and recreated if needed. So after doing revenue recognition reversal we are reversing the PGI. After this when we try to delete the Delivery ( which would have got deleted if there was no revenue recognition process ) we get the below error.
Is it a problem with the way Revenue recognition is configured or does the standard behave like this. If the Invoice is also present in the above I am able to cancel the Invoice. If you think its a problem with the way Revenue reccognition is configured please advise.
Item 000010 cannot be deleted (revenue recognition status)
Message no. VL896
Diagnosis
The delivery or delivery item cannot be deleted.
System response
The document cannot be deleted since the delivery contains items that
reference sales document items that are relevant for revenue
recognition. When the goods issue was posted, the system created revenue
lines that had already been recognized. This means that there are
subsequent documents in revenue recognition for this delivery.
Procedure
If you no longer require the delivery or delivery item for deletion, set
the delivery quantities to zero and repost the goods issue. Make sure
that the quantity zero is allowed in Customizing for the delivery item
category. When the goods issue is posted, the overall processing status
is set to C and the delivery can be archived. Message determination
should be configured not to send any messages in this case. To make sure
that the system makes revenue corrections if there are differences
vbetween billed and recognized values, set a billing-relevant rejection
reason in the sales document item if more than one partial delivery is
allowed.
If you still want to use the delivery, adjust the delivery quantities
accordingly. Alternatively, deliver the referencing sales document item
again. Note that the sales document item cannot be delivered again if
only a partial delivery is allowed.
What are the changes I can do to Delete the Delivery?
If I cannot Delete the Delivery, Should I make the Delivery as 0 qty and create a new delivery with changed qty and do further process. Or should I reject the Sales Order and create a new sales order with exact qty and do further process.
Please advise.
Regards,
SNK.
Delivery has one line item. For the above case scenario, invoice is there for some deliveries and for some deliveries there is no invoice. Eg: SO -> DN -> PGI -> Rev Recog -> Iv or SO -> DN -> PGI -> Rev Recog. Requirement was SO was wrongly created as the qty was wrong or in some cases SO needs to be rejected. I am able to cancel Invoice. Rev recog is reversed. PGI is cancelled by VL09. Not able to delete Delivery and I get the above error. Ideally I thought since Rev recog is reversed, Delivery should have been deleted but not happening and above error comes.
SO - Sales Order DN - Delivery IV - Invoice
Edited by: sapconsultnt on Dec 16, 2009 5:06 AM

Hello,
Please review the Note 1224871 which introduced this functionality.
Regards,
Raghavendra YN

Not Able To Delete Master Agreements/Sub Agreements

Similar Messages

Maybe you are looking for