Not able to delete some of the pages in subpage

Hi,
I am not able to delete some of the subpages in a pagegroup and it gives the following error mentioned below can any one shed some light so that it can be fixed.
the error that surprised me during the page deletion is
Internal error (WWC-00006)
Error while deleting page. (WWC-44130)
Unexpected error - User-Defined Exception (WWC-35000)
Unexpected error - User-Defined Exception (WWC-35000)
Path ID does not exist. (WWC-50001)
this is the same problem with some of the pages is the same page group but a different set of subpages.
My portal version is 10.1.2.0.2 (Build: 150).
it would be very nice of them if any one could give me a solution for this.
Best Regards,
Vijay.

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

Similar Messages

Not able to play some of the copyrighted or licensed files

Hi,
Since a month or so, I am not able to play most of my wma files, which were ripped from original audio CDs. The problem is not universally applicable to all of the licensed files because there are some, I am able to play(but that is only a minority, as that
represents music from just one original audio CD).
A few times in between I am able to play these files, but I am unable to find any correlation with any action/task performed. This problem resurfaces again and again.
I tried restoring the computer, but didn't solved it. Restarted, fixed the registry errors, but to no avail.
Please note that I am also having blue screen errors from time to time (one error in a day or two). The blue screen of death comes just randomly and computer restarts.
I also vaguely remember that a few weeks back, I solved this problem by typing some command in command prompt. I tried to find out that web page(from where I got this command), but couldn't. It was may be a registry problem. But, I am not 100% sure about all
this.
Below are the outcomes on different players:
Winamp:- Nothing happens
WMP:- A message comes "The player is not installed correctly, please reinstall the player"
VLC:- Tries to play repeatedly, not able to play.
I recorded the messages of VLC on a verbosity of 2 i.e. debug mode:
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\playlist\youtube_homepage.luac
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\playlist\zapiks.luac
ps warning: this does not look like an MPEG PS stream, continuing anyway
main debug: using demux module "ps"
main debug: looking for a subtitle file in C:\i omega\manu\My Music\ENGLISH(ORIGINAL)\POWER BALLADS-1\
main debug: looking for meta reader module matching "any": 2 candidates
main debug: using meta reader module "taglib"
main debug: removing module "taglib"
main debug: `file:///C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma' successfully opened
ps warning: garbage at input, trying to resync...
ps warning: found sync code
ps warning: garbage at input, trying to resync...
main debug: selecting program id=0
main debug: looking for decoder module matching "any": 39 candidates
main debug: using decoder module "mpeg_audio"
mpeg_audio debug: waiting for PTS
ps warning: found sync code
ps warning: garbage at input, trying to resync...
main debug: EOF reached
main debug: finished input
main debug: removing module "mpeg_audio"
main debug: killing decoder fourcc `mpga', 0 PES in FIFO
main debug: removing module "ps"
main debug: Program doesn't contain anymore ES
main debug: removing module "record"
main debug: removing module "filesystem"
main debug: dead input
main debug: changing item without a request (current 0/1)
main debug: using item 0
main debug: starting playback of the new playlist item
main debug: resyncing on another day in paradise.wma
main debug: another day in paradise.wma is at 0
main debug: creating new input thread
main debug: Creating an input for 'another day in paradise.wma'
main debug: using timeshift granularity of 50 MiB, in path 'C:\Users\Abhay\AppData\Local\Temp'
main debug: `file:///C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma' gives access `file' demux `' path `/C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma'
main debug: creating demux: access='file' demux='' location='/C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma' file='C:\i omega\manu\My Music\ENGLISH(ORIGINAL)\POWER BALLADS-1\another day in paradise.wma'
main debug: looking for access_demux module matching "file": 12 candidates
main debug: no access_demux modules matched
main debug: creating access 'file' location='/C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma', path='C:\i omega\manu\My Music\ENGLISH(ORIGINAL)\POWER BALLADS-1\another day in paradise.wma'
main debug: looking for access module matching "file": 20 candidates
filesystem debug: opening file `C:\i omega\manu\My Music\ENGLISH(ORIGINAL)\POWER BALLADS-1\another day in paradise.wma'
main debug: using access module "filesystem"
main debug: Using stream method for AStream*
main debug: starting pre-buffering
main debug: received first data after 0 ms
main debug: pre-buffering done 1024 bytes in 0s - 1000000 KiB/s
main debug: looking for stream_filter module matching "any": 6 candidates
main debug: no stream_filter modules matched
main debug: looking for stream_filter module matching "record": 6 candidates
main debug: using stream_filter module "record"
main debug: creating demux: access='file' demux='' location='/C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma' file='C:\i omega\manu\My Music\ENGLISH(ORIGINAL)\POWER BALLADS-1\another day in paradise.wma'
main debug: looking for demux module matching "asf": 63 candidates
asf warning: unknown asf object (not loaded): 0xd9aade20-0x7c17-0x4f9c-0xbc288555dd98e2a2
asf warning: unknown asf object (not loaded): 0x1efb1a30-0xb62-0x11d0-0xa39b00a0c90348f6
asf debug: + 'Unknown'
asf debug: | + 'Header'
asf debug: | | + 'File Properties'
asf debug: | | + 'Content Encryption'
asf debug: | | + 'Extended content description'
asf debug: | | + 'Header Extension'
asf debug: | | | + 'Language List'
asf debug: | | | + 'Unknown'
asf debug: | | | + 'Metadata'
asf debug: | | | + 'Padding'
asf debug: | | | + 'Extended Stream Properties'
asf debug: | | | + 'Unknown'
asf debug: | | + 'Unknown'
asf debug: | | + 'Codec List'
asf debug: | | + 'Stream Properties'
asf debug: | | + 'Stream Bitrate Properties'
asf debug: | + 'Data'
Any sort of help/suggestion will be appreciated. Thanks!

Hi,
>A message comes "The player is not installed correctly, please reinstall the player"
Could you please share more details about the error messages?
Regarding the error messages showed above, have you tried to reinstall Windows Media Player by
Turn Windows Features on or off?
For VLC issue, please consider seek help in their offical website for further assistance.
Thank you for your understanding.
Best regards
Michael Shao
TechNet Community Support

JTable cell editor ..not able to delete value in the cell

Hello,
I have applied Cell Editor on the JTAble. I'm able to enter value initially in the cell.
Once I tab out of that cell, go back to the same cell, edit the value again and tab out. It still shows me old value, not the updated one.
I'm using putClientProperty("terminateEditOnFocusLost", Boolean.TRUE) to recognise the cell value without focus lost.
Does this cause any problem ???
Thanks in advance
Kapil

then what might be the problem of value not getting deleted ??
Code is:
public class MyTableCellEditor extends AbstractCellEditor
implements TableCellEditor {
//This is the component that will handle the editing of the cell value
private JTextField component = null;
//This method is called when a cell value is edited by the user.
public Component getTableCellEditorComponent(JTable table, Object value,
boolean isSelected, int rowIndex, int vColIndex) {
component = new JTextField();
System.out.println("value*************** "+value);
System.out.println("Component value*************** "+component.getText());
if(value != null){
component.setText(value.toString());
else{
component.setText("");
// Return the configured component
return component;
// This method is called when editing is completed.
// It must return the new value to be stored in the cell.
public Object getCellEditorValue() {
return component.getText();
public boolean shouldSelectCell(EventObject anEvent) {
return false;
}

We have two iPod touch 2nd generations, one had to be restored a few days ago and is now not able to have some of the apps back on it saying that they are incompatible with the iPod. Is there any way to "copy" the apps from 1 to the other??

Is there any way to get an older version of the app that can be compatible or to "copy" the app from one iPod to the other?
Or maybe to update the opperating system??

you can by downloading iTunes to your computer/laptop but before plugging it in to the computer make sure all of your apps are on it then just sync the restored iPod to your computer and all of the apps on the computer will go to your iPod.. Good Luck

Not able to delete any Entity Dimension members

Hi All,
I am trying to delete some Entity Dimension members but its not allowing me to delete. This problem is only for Entity Dimension.
I can edit Entity member name or properties successfully but not able to delete or move the position.
I also tried to check member usage but its not giving me any results, a blank screen comes and planning goes down after some time. Same happens when I try to delete any Entity member.
I have admin rights on Planning and I can delete other dimension member but not for Entity. There is no workflow started for Entity but If it is than also it pop-ups that after member deletion all planning unit will be lost. I have bounced planning DB and also restarted all Hyperion services but still no luck.
Please let me know if anyone has faced this issue or have any solution to resolve.
Regards
Vishal

Hi John,
After uncheck of "enabled for process management" for all Scenario along with Version dimension members , this issue is now resolved. But its a temporary resolution as client has not yet started any workflow so we can uncheck that options ,but when they need to start workflow process then we have to check this options again which will start this issue again.
Do you have any permamant resolution for this issue?
Thanks for your help.
Regards
Vishal

Operating system not able to display some website or display with many lines. too sllow also.

I just have a new HP pavillon .but am not able to access some of the website I was using wiht windows 7.What will happen if I change it to windows 7. Do I am going to loose my garanty ?

I have a iMac and Macbook pro at work and at home also, all less than two years old, one two weeks old, and I have noticed the same behavior. As in your case it has been going on for a couple of months or so. Depending on the download speed the page eventually loads and it never happens later in the evening or early in the am. Have a PC that has the same issue among others. My ISP says it's a bottleneck problem that they have no control over. Minor irritation, if yours is more than that it may be something else but I wouldn't try to fix something that might not be broken, give it some time my connection speeds have been better lately and haven't noticed it as much if at all.

TS3276 On the left side of the mail page there is an "On My Mac" header with several folders included. One of the folders, in white, is one called "recovered mail" I don't know how this got there and am not able to delete it. Not receiving any email now.

On the left side of the mail page there is an "On My Mac" header with several folders included. One of the folders, in white, is one called "recovered mail" with 843 messages in it. I don't know how this got there and am not able to delete it. I am also no longer receiving any email now. Help!

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

In my photobook some of the pages have "Lor" appear in the margin of the page. I can't seem to delete it. Any idea what it is?

I am creating a photo book in iPhoto. In the page view, book view, and slideshow, it shows the letters "Lor" in the right margin on some of the pages. I haven't been able to delete it and don't know why those letters are showing up there. Any ideas?

It sounds like you are using a Chinese font.
Use something else eg Times or Helvetica or any European font.
If the character disappears, its the font.
Peter

I updated my software today and since have not been able to use some of the games on Facebook. I have installed the flash player 12 and still problems, can anyone give me some advice?

I updated my software today and since have not been able to use some of the games on Facebook. I have installed the flash player 12 and still problems, can anyone give me some advice?

Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
You can use this manual download link:
*http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

HT4847 My iCloud says that I am almost out of back up space. I want to delete some of the games that were backed up. After I turn them off, do I hit the delete back up at the bottom of the page?

My iCloud says I am almost out of back up space. I want to delete some of the games that it backed up. I turned them off, but I didn't know if I should hit the delete back up at the end of the page.

Hi SarahElizabeth18,
If you are getting errors about there not being enough space on your device, you may want to check to see if Other data is unusually large. You may find the following article helpful:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Regards,
- Brenden

Why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.

why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Transport is in modifiable status, But i could not able to delet the object

Hi All,
I have created one development transport and one customizing transport(my colleague), now i want to delete the some objects which contain these change request. But i can not able to delete those objects even though change request is in modifiable status.
How to delete the objects contain in modifiable transport?

Hi Arun,
It seems working now
Can add/delete the objects for released transport?
is it possible.
Two more question:
1). I have released one change request, now i want to change the description of the request, how to do that?
2).While executing transports, RDD* (RDDIMPDP) job has canceled in the target system.then what should i do?

In my contacts, I want to edit information. Some of this information is 'grayed out' and I am not able to delete it - any suggestions are greatly appreciated. Thanks

In my contacts, I want to edit information. Some of this information is 'grayed out' and I am not able to delete it - any suggestions are greatly appreciated. Thanks

For example: SusanX has quit her job and I still have her employment email address and phone number. All her other information is the same but I want to delete the information no long viable. When I go into edit mode the information is grayed out and is not deletable. I went to my iCloud and tried to delete it there, no luck.
I am thinking I might just have to delete the entire contact card and just start from scratch with only her current information. Seems like there should be a way to delete only parts of the information rather that resort to start a new contact card.
Thanks for your help. I appreciate you taking the time to advise me on this.
Mona

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

Hi donfrommars,
Welcome to the Apple Support Communities!
Please use the following article for information and instruction on deleting the U2 album from your devices and account.
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
Have a great day,
Joe

Please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store

please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store

Ok, you should generally only get this when you are converting your ID to an iTS account for the first time.
Sign into iTunes with your Apple ID and you should get this.... IRC once you agree or accept it's now an iTS account and you wont get that again.

Not able to delete some of the pages in subpage

Similar Messages

Maybe you are looking for