Not able to display document at sost transaction
I am sending a mail by using the function module SO_NEW_DOCUMENT_ATT_SEND_API1. Initially I was able to see the document at SOST transaction. But now I am not able to display the document even though I had not done any changes in the program.
Hi,
In SOST goto SEND STATUS tab and check all the check boxes ie, Waiting, Errors & Sent.
Hope this works.
Regars
Bikas
Similar Messages
-
PCA document not able to display in tc: 9KEK
Hi,
I have posted some entries in PCA via allocation and also adjustment entries.
I am able to see these entries in GLPCA table and also in standard line item report: KE5Z but not able see the document in PCA document display transaction 9KE9, I have selected the layout, doc number, document type.
Any help on this.
Thanks
SureshIf you assign the profit center in the document or it will be posted dummy profit center automatically,based on cost objects assignment to the profit center.kinldy check once again in the profit center master data.If you posted the document pertaining to the profit center, it shows in the report KE5Z.
Please check in the master data and document.
Thanks and regads
Sivakumar.Subbiah -
Not able to display flat file's error line in output
The below Source Code is BDC for XD01 (update Customer Master Record) in CALL TRANSACTION method. This program is written in call transaction method cause as per users requirement, user wants error log to be printed as soon as the BDC process finished in the background mode.
When you execute this below program it will show a selection screen from where you can select your flat file from system.
After executing this code show output like below as soon as it finished processing the FLAT file.
1. Customer Update Summary
2. Successful record with customer number and name.
3. Error Records with 'record number' and 'reason for error'
(For testing you just have to copy-paste-save-active the source code)
And I have encountered an issue over here in 3rd section-Record Number of Error Records.
The Record Number is for display the line number of that flat file line which in which error has occurred.
The Record Number Entries showing only 0 instead of showing line number of error entry .
I have used Function Module FORMAT_MESSAGE to capture the errors. But not able to display line number of that flat file which is containing error.
So please suggest me what changes I should make in below source code to get proper output.
Flat file for your R&D
1000 1000 10 10 0001 Company Chobey & Group1N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
1000 1000 10 10 0001 Company Chobey & Group2N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
1000 1000 10 10 0001 Company Chobey & Group3N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS . A 10 1
1000 1000 10 10 0001 Company Chobey & Group4N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A .. 1
1000 1000 10 10 0001 Company Chobey & Group5N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
And Source Code
*& Report Z_TEST_SAI *
REPORT Z_TEST_SAI no standard page heading line-size 255.
TYPES: BEGIN OF t_cust,
bukrs like rf02d-bukrs,
vkorg like rf02d-vkorg,
vtweg like rf02d-vtweg,
spart like rf02d-spart,
ktokd like rf02d-ktokd,
anred like kna1-anred,
name1 like kna1-name1,
sortl like kna1-sortl,
name2 like kna1-name2,
name3 like kna1-name3,
name4 like kna1-name4,
stras like kna1-stras,
pfach like kna1-pfach,
ort01 like kna1-ort01,
pstlz like kna1-pstlz,
ort02 like kna1-ort02,
pfort like kna1-pfort,
pstl2 like kna1-pstl2,
land1 like kna1-land1,
regio like kna1-regio,
telx1 like kna1-telx1,
telf1 like kna1-telf1,
telfx like kna1-telfx,
telf2 like kna1-telf2,
teltx like kna1-teltx,
stceg like kna1-stceg,
cityc like kna1-cityc,
lzone like kna1-lzone,
niels like kna1-niels,
kukla like kna1-kukla,
akont like knb1-akont,
fdgrv like knb1-fdgrv,
vzskz like knb1-vzskz,
zterm like knb1-zterm,
vkbur like knvv-vkbur,
versg like knvv-versg,
vsbed like knvv-vsbed,
ktgrd like knvv-ktgrd,
taxkd like knvi-taxkd,
END OF t_cust.
TYPES: BEGIN OF t_sucrec,
cnum TYPE kna1-kunnr, "Customer Number
cnam TYPE kna1-name1, "Customer Name
END OF t_sucrec.
TYPES: BEGIN OF t_errrec,
* lineno TYPE i, "Line Number
lineno TYPE string,
message TYPE string, "Error Message
END OF t_errrec.
DATA: v_file TYPE string, "Variable for storing flat file
it_cust TYPE STANDARD TABLE OF t_cust, "Internal table of Customer
wa_cust LIKE LINE OF it_cust, "Workarea of Internal table it_cust
it_sucrec TYPE STANDARD TABLE OF t_sucrec, "Internal table of Success records
wa_sucrec LIKE LINE OF it_sucrec, "Workarea of Internal table it_sucrec
it_errrec TYPE STANDARD TABLE OF t_errrec,
wa_errrec LIKE LINE OF it_errrec,
it_bdctab LIKE bdcdata OCCURS 0 WITH HEADER LINE, "Internal table structure of BDCDATA
it_messagetab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE, "Tracing Error Messages
v_date LIKE sy-datum, "Controlling of session date
v_index LIKE sy-index, "Index Number
v_totrec TYPE i, "Total Records
v_errrec TYPE i, "Error Records
v_sucrec TYPE i, "Success Records
v_sesschk TYPE c. "Session maintenance
*& SELECTION-SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001 NO INTERVALS.
PARAMETERS: p_file TYPE rlgrap-filename. "rlgrap-filename is a predefined structure
SELECTION-SCREEN: END OF BLOCK blk1.
SELECTION-SCREEN: BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002 NO INTERVALS.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N',
p_update LIKE ctu_params-updmode DEFAULT 'A'.
SELECTION-SCREEN END OF BLOCK blk2.
*& INITIALIZATION
INITIALIZATION.
v_date = sy-datum - 1.
*& AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
FIELD_NAME = ' '
IMPORTING
file_name = p_file.
*& START-OF-SELECTION
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = it_cust
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc = 0.
*MESSAGE ID sy-msgid
*TYPE sy-msgty
*NUMBER sy-msgno
*WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& END-OF-SELECTION
END-OF-SELECTION.
v_index = sy-index.
LOOP AT it_cust INTO wa_cust.
perform bdc_dynpro using 'SAPMF02D' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KTOKD'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02D-BUKRS'
wa_cust-bukrs.
perform bdc_field using 'RF02D-VKORG'
wa_cust-vkorg.
perform bdc_field using 'RF02D-VTWEG'
wa_cust-vtweg.
perform bdc_field using 'RF02D-SPART'
wa_cust-spart.
perform bdc_field using 'RF02D-KTOKD'
wa_cust-ktokd.
perform bdc_dynpro using 'SAPMF02D' '0110'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-TELTX'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-ANRED'
wa_cust-anred.
perform bdc_field using 'KNA1-NAME1'
wa_cust-name1.
perform bdc_field using 'KNA1-SORTL'
wa_cust-sortl.
perform bdc_field using 'KNA1-NAME2'
wa_cust-name2.
perform bdc_field using 'KNA1-NAME3'
wa_cust-name3.
perform bdc_field using 'KNA1-NAME4'
wa_cust-name4.
perform bdc_field using 'KNA1-STRAS'
wa_cust-stras.
perform bdc_field using 'KNA1-PFACH'
wa_cust-pfach.
perform bdc_field using 'KNA1-ORT01'
wa_cust-ort01.
perform bdc_field using 'KNA1-PSTLZ'
wa_cust-pstlz.
perform bdc_field using 'KNA1-ORT02'
wa_cust-ort02.
perform bdc_field using 'KNA1-PFORT'
wa_cust-pfort.
perform bdc_field using 'KNA1-PSTL2'
wa_cust-pstl2.
perform bdc_field using 'KNA1-LAND1'
wa_cust-land1.
perform bdc_field using 'KNA1-REGIO'
wa_cust-regio.
perform bdc_field using 'KNA1-SPRAS'
'EN'.
perform bdc_field using 'KNA1-TELX1'
wa_cust-telx1.
perform bdc_field using 'KNA1-TELF1'
wa_cust-telf1.
perform bdc_field using 'KNA1-TELFX'
wa_cust-telfx.
perform bdc_field using 'KNA1-TELF2'
wa_cust-telf2.
perform bdc_field using 'KNA1-TELTX'
wa_cust-teltx.
perform bdc_dynpro using 'SAPMF02D' '0120'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-CITYC'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-STCEG'
wa_cust-stceg.
perform bdc_field using 'KNA1-CITYC'
wa_cust-cityc.
perform bdc_field using 'KNA1-LZONE'
wa_cust-lzone.
perform bdc_dynpro using 'SAPMF02D' '0125'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-KUKLA'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-NIELS'
wa_cust-niels.
perform bdc_field using 'KNA1-KUKLA'
wa_cust-kukla.
perform bdc_dynpro using 'SAPMF02D' '0130'.
perform bdc_field using 'BDC_CURSOR'
'KNBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0340'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0360'.
perform bdc_field using 'BDC_CURSOR'
'KNVK-NAMEV(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0210'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-VZSKZ'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNB1-AKONT'
wa_cust-akont.
perform bdc_field using 'KNB1-FDGRV'
wa_cust-fdgrv.
perform bdc_field using 'KNB1-VZSKZ'
wa_cust-vzskz.
perform bdc_dynpro using 'SAPMF02D' '0215'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNB1-ZTERM'
wa_cust-zterm.
perform bdc_dynpro using 'SAPMF02D' '0220'.
perform bdc_field using 'BDC_CURSOR'
'KNB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0230'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-VRSNR'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0610'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KUNNR'.
perform bdc_dynpro using 'SAPMF02D' '0310'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-VERSG'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-AWAHR'
'100'.
perform bdc_field using 'KNVV-VKBUR'
wa_cust-vkbur.
perform bdc_field using 'KNVV-WAERS'
'INR'.
perform bdc_field using 'KNVV-KALKS'
'1'.
perform bdc_field using 'KNVV-VERSG'
wa_cust-versg.
perform bdc_dynpro using 'SAPMF02D' '0315'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-VSBED'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-LPRIO'
perform bdc_field using 'KNVV-KZAZU'
'X'.
perform bdc_field using 'KNVV-VSBED'
wa_cust-vsbed.
perform bdc_field using 'KNVV-ANTLF'
'9'.
perform bdc_dynpro using 'SAPMF02D' '0320'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-KTGRD'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-BOKRE'
'X'.
perform bdc_field using 'KNVV-KTGRD'
wa_cust-ktgrd.
perform bdc_dynpro using 'SAPMF02D' '1350'.
perform bdc_field using 'BDC_CURSOR'
'KNVI-TAXKD(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVI-TAXKD(01)'
wa_cust-taxkd.
perform bdc_dynpro using 'SAPMF02D' '0324'.
perform bdc_field using 'BDC_CURSOR'
'KNVP-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
CALL TRANSACTION 'XD01' USING it_bdctab
MODE p_mode
UPDATE p_update
MESSAGES INTO it_messagetab.
IF sy-subrc = 0.
*& reading success records to corresponding internal table
READ TABLE it_messagetab WITH KEY msgtyp = 'S'.
IF sy-subrc = 0.
wa_sucrec-cnum = it_messagetab-msgv1.
wa_sucrec-cnam = wa_cust-name1.
APPEND wa_sucrec TO it_sucrec.
CLEAR wa_sucrec.
ENDIF.
ELSE.
*& reading error records to corresponding internal table
READ TABLE it_messagetab WITH KEY msgtyp = 'E'.
IF sy-subrc = 0.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
no = it_messagetab-msgnr
v1 = it_messagetab-msgv1
v2 = it_messagetab-msgv2
v3 = it_messagetab-msgv3
v4 = it_messagetab-msgv4
IMPORTING
msg = wa_errrec-message.
wa_errrec-lineno = v_index.
*******wa_errrec-lineno = v_index.
*******wa_errrec-message = it_messagetab-msgv1.
APPEND wa_errrec TO it_errrec.
CLEAR wa_errrec.
ENDIF.
ENDIF.
CLEAR : it_bdctab, it_messagetab.
REFRESH: it_bdctab, it_messagetab.
ENDLOOP.
DESCRIBE TABLE it_cust LINES v_totrec.
DESCRIBE TABLE it_errrec LINES v_errrec.
DESCRIBE TABLE it_sucrec LINES v_sucrec.
PERFORM disp_data.
SKIP 2.
IF v_sucrec > 0.
PERFORM disp_success_data.
ENDIF.
SKIP 2.
IF v_errrec > 0.
PERFORM disp_error_data.
ENDIF.
*& Form bdc_dynpro
*# text
*# -->P_0104 text
*# -->P_0105 text
FORM bdc_dynpro USING program
dynpro.
CLEAR it_bdctab.
it_bdctab-program = program.
it_bdctab-dynpro = dynpro.
it_bdctab-dynbegin = 'X'.
APPEND it_bdctab.
ENDFORM. " bdc_dynpro
*& Form bdc_field
*# text
*# -->P_0109 text
*# -->P_IT_cust_LIFNR text
FORM bdc_field USING fnam
fval.
CLEAR it_bdctab.
it_bdctab-fnam = fnam.
it_bdctab-fval = fval.
APPEND it_bdctab.
ENDFORM. " bdc_field
*& Form disp_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_data .
ULINE (45).
WRITE : / sy-vline,
12 'FAMD CUSTOMER UPDATE SUMMARY'(004) COLOR 1,
45 sy-vline.
ULINE /(45).
WRITE : / sy-vline,
'Total Records Processed'(007),
28 '=',
30 v_totrec,
45 sy-vline,
/ sy-vline,
'Error Records'(005),
28 '=',
30 v_errrec,
45 sy-vline,
/ sy-vline,
'Successful Records'(006),
28 '=',
30 v_sucrec,
45 sy-vline.
ULINE /(45).
ENDFORM. " disp_data
*& Form disp_success_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_success_data .
ULINE (45).
WRITE : / sy-vline,
14 'Successful Records'(012) COLOR 1,
45 sy-vline.
ULINE /(45).
WRITE : / sy-vline ,
'Customer Number'(010) COLOR 2,
17 sy-vline,
25 'Customer Name'(011) COLOR 2,
45 sy-vline.
ULINE /(45).
LOOP AT it_sucrec INTO wa_sucrec.
WRITE: / sy-vline ,
wa_sucrec-cnum,
17 sy-vline,
19 wa_sucrec-cnam,
45 sy-vline.
ENDLOOP.
ULINE /(45).
ENDFORM. " disp_success_data
*& Form disp_error_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_error_data .
ULINE (85).
WRITE : / sy-vline,
35 'Error Records'(013) COLOR 1,
85 sy-vline.
ULINE /(85).
WRITE : / sy-vline,
'Record Number'(008) COLOR 2,
sy-vline,
37 'Reason for error'(009) COLOR 2,
85 sy-vline.
ULINE /(85).
LOOP AT it_errrec INTO wa_errrec.
WRITE : / sy-vline,
wa_errrec-lineno,
17 sy-vline,
wa_errrec-message,
85 sy-vline.
ENDLOOP.
ULINE /(85).
ENDFORM. " disp_error_dataWorked out n found the solution
-
Not able to display line item 20 in contract
I could not able to display line item 20 in the contract document.
line item 10 and 30is there however there is no line item 30. What could be reason and how to enable the same.
MRSIt may also possible if user forgot to enter the line item 20 and jump to line item 30 after 10 as below.
Then system will show as like this -
Not able to display logo on alv grid output
hi
can anybody guide me.
i have written code for displaying logo on alv grid report.
i uploaded bmp image using OAER
but even then i am not able to display logo on the report please help me
i am using 4.7 version..
code...
REPORT ZALVLOGO .
type-pools: slis.
data: i_sflight type table of sflight.
*data: begin of i_sflight occurs 10.
*include structure sflight.
*data: end of i_sflight.
data: it_events type slis_t_event,
wa_events type slis_alv_event.
select * from sflight into table i_sflight.
perform form_fill_table.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_TOP_OF_PAGE = 'top-of-page'
I_STRUCTURE_NAME = 'sflight'
TABLES
T_OUTTAB = i_sflight
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form top_of_page
text
--> p1 text
<-- p2 text
FORM top-of-page .
data: t_header type slis_t_listheader,
wa_header type slis_listheader.
wa_header-typ = 'h'.
wa_header-info = 'FLIGHT DETAILS'.
APPEND wa_header to t_header.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = t_header
I_LOGO = 'ENJOY'.
I_END_OF_LIST_GRID =.
ENDFORM. " top_of_page
*& Form form_fill_table
text
--> p1 text
<-- p2 text
FORM form_fill_table .
clear wa_events.
wa_events-name = 'top-op-page1'.
wa_events-form = 'top-of-page'.
append wa_events to it_events.
ENDFORM. " form_fill_tablehi ,
First upload images in SAP using transaction se78
http://www.howforge.com/step-by-step-upload-bitmap-images-to-sap
Then use that Image name to call using function module
in top of -page
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'KAL1_LOGO'
it_list_commentary = lt_top_of_page_no_sel.
Regards
Deepak. -
Flash File not Able to Display using ADF Trinidad components..
Hi All,
I am trying to display a flash file using ADF trinidad component for one our project but not able to display when embeded inside the code.
However I am able to directly access the flash file using http://localhost:7101/test/pages/test.swf
The below Object code is included inside the tr:panelHorizontalLayout tag. I also tried using tr:media but doesnt display anything on the browser.
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
<param name="allowScriptAccess" value="sameDomain"/>
<param name="allowFullScreen" value="false"/>
<param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
<param name="quality" value="high"/>
<param name="bgcolor" value="#ffffff"/>
<embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
</object>-->
Thanks
ChetanHi Ramandeep,
I tried that option early but did not work. Not able to understand why.
Below is the code snippet.
<tr:panelGroupLayout layout="vertical">
<tr:panelHorizontalLayout>
<!--Some Portlets are added-->
<f:verbatim>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
<param name="allowScriptAccess" value="sameDomain"/>
<param name="allowFullScreen" value="false"/>
<param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
<param name="quality" value="high"/>
<param name="bgcolor" value="#ffffff"/>
<embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
</object>
</f:verbatim>
</tr:panelHorizontalLayout>
</tr:panelGroupLayout>
And as I mentioned it works fine when I directly access the flash file by using http://localhost:7101/test/pages/test.swf.
Thanks
Chetan -
Not able to display error message in PR creation.
HI Experts,
In PR creation process i am not able to display error message.
BADI: ME_PROCESS_REQ_CUST
method : PROCESS_ACCOUNT, PROCESS_ITEM
I have used Include mm_messages_mac for handling error .
MESSAGE e112(XXX) WITH XX-XX. this is my error message.
even tried this also mmpur_message 'W' 'ZMM_PUR' '001' '' '' '' ''.
Please provide solution for this.
Regards,
JayantHi,
In devepoment system im able to display the message but not in quality,code is 100% algined with quality.
In quality system error message is being executed but not displayed,i mean control is comming out after the error message.
i am using
message EXXX(XXX).
regards,
Jayant. -
Not able to display javascript alert message from within a pl/sql block
Hello,
Can anyone please help me out with this issue. I wanted to display an javascript alert message from within a pl/sql block for an update button. Below is sample code which i am using. P1_ITEM is my hidden item on the report.
begin
if :P1_ITEM IS NOT NULL then
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
HTP.p ('</script>');
end if;
end;
and I have made this code to be executed conditionally when request = Expression1
Expression1: SUBMIT
The thing is I am not able to display an alert message when the update button is clicked.
Can anyone please help me with this one.
Thanks,
Ortonvarad but I also have an update statement within that block for the update button something like this i want to achieve.
begin
if :P1_ITEM IS NULL THEN
update sample_tbl
set col1 =:APP_USER,
col2 = 'Y'
where pk_col = ---;
commit;
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Successfully assigned an item!'');');
HTP.p ('</script>');
end if;
if :P1_ITEM IS NOT NULL then
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
HTP.p ('</script>');
end if;
end;
thanks,
Orton -
I'm not able to open documents saved from the internet.
I'm not able to open documents saved from the internet. I'm using a macbook pro en Adobe Acrobat X 10.1.10. I tried: file - export als PDF and save as PDF, none of this works. I always receive a message stating an error and saying that I need to go back to the original file what I did without result. Does anyone have (or had) the same problem?
What they mean is iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html
-
I AM NOT ABLE TO RECIVE DOCUMENTS IN MY EMAIL, if some one sends me a word document I am not able to see it
Do you have MS Office installed? If not, you need to either:
1) buy a compatible copy of MS Office†, or
2) get one of the free, open-source Office-compatible packages like LibreOffice.
We possibly can offer further enlightenment if you tell us more about tyour iMac. Do "About this Mac" from the Apple menu and post what the resulting window says about your Mac OS version and the processor type.
†-- NOTE: The pre-2006 Macs this forum serves can use no higher version of MS Office that Office 2008. Office 2008 requires a 500mHz G4 processor, any G5 processor, or Intel processor, and a minimum Mac OS of 10.4.9 -
Not able to display a dynamic image
I'm not able to display a dynamic image on Adobe print form.
Here is what I did.
Please let me know what I need to do to get this working...
1. Created a Graphics node in the Context of the Adobe form.
2. In the URL tab of the graphics node defined the following two lines:
<URL pointing to the MIME repository folder>
IM_FILENAME_1
Where IM_FILENAME_1 is being passed to the Adobeform function module.
3. In the Layout mode, dragged and dropped the Graphics node from the
contenxt tab to the form layout. On doing so it appears as a image field in the form layout.
4. Activated the form.
BUT, when I run the form , the image is not showing up.
The idea is to pass the image file name to the form so that it will show up a dynamic image at run time.
PLEASE HELP.Hi Atul,
Try this, that should work.
In the interface , define a parameter type string where you will store the URL of the image .
In the initialization part of the interface , check if the URL is defined, in case it's empty define a default URL . You should put the compelte URL of the image like "http://www.company.org:8080/logo.logo.jpg" .
Then link this parameter to the Grpahic Node in the URL parameters .
Let me know if that works -
I'm running Safari 6.0.2. And previous to a recent update I was able to drag a XML file into the browser and it would display the contents. Now it does nothing. I'm guessing with the last update it removed an extension that used to allow this to happen. Can anyone suggest a good XML display extention they've had good luck with.
Thanks!The only browser I am aware of that currently knows how to
display XML is IE5. Otherwise, you will need to convert the XML
into well-formed HTML or xHTML through and XSLT stylesheet.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
Ravinder Kamal (guest) wrote:
: I not able to display the XML file in my browser even after
using
: using an XSL Stylesheet. I am not using IE5 browser.
: The output of command :
: C\>java XSLSample iden.xsl empl.xml
: <root>
: <ROWSET>
: <ROW num="1">
: <EMP_ID>PMA42628M</EMP_ID>
: <FNAME>Paolo</FNAME>
: <MINIT>M</MINIT>
: <LNAME>Accorti</LNAME>
: <JOB_ID>13</JOB_ID>
: <JOB_LVL>35</JOB_LVL>
: <PUB_ID>0877</PUB_ID>
: <HIRE_DATE>1992-08-27 00:00:00.0</HIRE_DATE>
: </ROW>
: </root>
: where iden.xsl is :-
: <?xml version="1.0"?>
: <!-- Identity transformation -->
: <xsl:stylesheet
xmlns:xsl="http://www.w3.org/XSL/Transform/1.0">
: <xsl:template match="*|@*|comment()|pi()|text()">
: <xsl:copy>
: <xsl:apply-templates
: select="*|@*|comment()|pi()|text()"/>
: </xsl:copy>
: </xsl:template>
: </xsl:stylesheet>
: -R.S.Kamal
null -
Hi,
we are in SRM 7.0 extended classic and using portal as UI.
1.I'm able to create shopping cart but not able to display the same,when clicked on display nothing is displayed.
other buttons are working fine like Preview
2.When clicked on the Punch out catalog it does not take to the catalog or does not give any error just nothing happens, checked the call structure
everything seems to be correct.
could you please guide how to rectify this issue.
Thanks & Regards
VenuHello,
This is probably related to IE settings.
Read and apply changes recommended in note 1511147 and retest the scenario.
Regards,
Ricardo -
OAF page is not able to display the custom error messages
Hi,
I have extended a seeded CO and trying to throw few custom error messages.
It was working fine, but suddenly it is not able to display the error messages(but checked that the error messages are still present in application) and saying "Message not found. Application: PER, Message Name: ...."
Is there any profile option which enables the custom messages?
Thanks,
RanitaHi,
There is no profile to enable the Custom error Messages, u will use the diagnostistics for showing the messages in the custom page
use the following syntax for writing a msg in Jdeveloper
pageContext.writeDiagnostics(strClassName, "Initializing the vo....", OAWebBeanConstants.STATEMENT);
and enable the following profile option to yes
Fnd:Diagnostics
Regards
Chanu -
I am not able to display the text conditionally
i am not able to display the text conditionally
Please check the below formula.
i am not able to print all the below text,the text is printing only one line and some is missing.
Please do the needful.
@(If(("@Endrdesc1."=="EWWC006"),"12 It is hereby understood and agreed that any work in connection with the delivery or cartage of goods other than by hand, handcart, cycle or bicycle is expressly excluded from the indemnity granted under this policy 97 It is hereby understood and agreed that any work away from shop or studio is expressly excluded from the indemnity granted under this policy.",""))
Maybe you are looking for
-
I downloaded the newest version of itunes and now it keeps telling me I can not access no internet connection and I connected, how do you fix this issue. If you got the message then I'm connected
-
Why does Safari only display the first page of PDFs
When I use Safari to view PDFs attached to a web site I manage only the first page of the PDF displays. There is no problem if I use other browsers. Also the problem is specific to my machine as other Mac users can view all pages of the PDF on their
-
Flash player detection/install failure
First time login to Share. After inputting my Adobe id and pw, I'm taken to: https://share.acrobat.com/adc/adc.do The page has the title "Share beta - Flash player installation". I see a connection occurring to fpdownload.macromedia.com and after a s
-
PLEASE HELP ME!
-
Essbase Error: 1051498 Failed to renew token
When trying to create a new ASO application (Essbase 11.1.2) - received this error - Error: 1051498 Failed to renew token. Can anyone please advise? Thanks, Paul DISREGARD THIS REQUEST - THANKS