Not able to display I.V document for Import P.O
Dear All ,
pl help that i m using MIR4 to display an
I.V document , this dcoument was posted for custom duties for an import P.O .but afetr giving doc. number & fiscal yr an error comes as below -
>
" Enter rate USD / INR rate type M for 24.12.2007 in the system settings "
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction.
Pl help what system settings are to be done to display this document .
sap12
Edited by: sap12 on Sep 5, 2008 8:44 AM
thanx for info i had tried thisin dev server , what i had done for learning purpose that i had deleted the all data for year 2008 in OB08 then i hd done the MIRO so what had happened in Detail tab on MIRO the system had automatically picked the currency rate from 2007 , this had given me a lesson that if user had not maintained the currency rate for 2008 then it will pick from 2007 but in my case it is giving me date is the system wants to give me message that the currency rate are not maintained on 24.12.2007 so to overcome this error i have to go to OB08, then here in from column i will give 24.12.2007 & save , am i right ?
sap12
Similar Messages
-
Not able to release normal change document for development
Hello All
We have Implemented ChaRM in SolMan 7.1 SP10
Have created the Project and activated Charm with required DEV/QA/PRD logical component and before creating the Maintenance cycle, we did a check in the project which showed all green..
We are able to create a request for Change and go till the approval, when we try to change the status to release for development, it is throwing the below error and not letting us go further.
We have checked the MC phase, and it is in phase Dev with release.
Project is in IN PROCESS state.
IBASE and Component details are correct.
Tried to put back to Validation and re tried for Development and this did not work.
Until unless change document created successfully, we cannot go ahead even though MC phase is in DEV with release.
I have seen few blogs and I have checked below steps
system roles in SMSY
Landscape system info
Changed MC phase to DEV with release
Strange why it is not allowing to create change document ???
Please assist
Thanks
Sateesh.Hello,
Three consistency checks are performed when you choose action "release for development" (resulting in the SMCR's status "being implemented"):
PROJECT_ASSIGNED: Project is Assigned
SYSTEM_EXIST: System assigned to collective change request
FOLLOW_ON_GEN_OK: Change Documents Can be Created
In case any of these checks fails, the SMCR's status returns to "approved".
These same consistency check are also checked when the SMCR status is set to "approved". The behavior for a failed check, however, is different in this case. Just a warning message is shown on the top of the screen and the "approved" status can be set.
Question 1: When you set the SMCR to "approved", those warnings are shown too?
Perhaps there is something wrong with the assigned project.
Check if the assigned logical component has the correct systems/clients.
Check if the transport tracks between the systems listed in the logical component are working.
Question 2: When you assign the scope (change type, in your case, Normal Change), some system data from the production system defined in the logical component are automatically filled (System, Client, Configuration Item, etc). Is this happening?
Regards,
Daniel -
Not able to display document at sost transaction
I am sending a mail by using the function module SO_NEW_DOCUMENT_ATT_SEND_API1. Initially I was able to see the document at SOST transaction. But now I am not able to display the document even though I had not done any changes in the program.
Hi,
In SOST goto SEND STATUS tab and check all the check boxes ie, Waiting, Errors & Sent.
Hope this works.
Regars
Bikas -
Not able to display flat file's error line in output
The below Source Code is BDC for XD01 (update Customer Master Record) in CALL TRANSACTION method. This program is written in call transaction method cause as per users requirement, user wants error log to be printed as soon as the BDC process finished in the background mode.
When you execute this below program it will show a selection screen from where you can select your flat file from system.
After executing this code show output like below as soon as it finished processing the FLAT file.
1. Customer Update Summary
2. Successful record with customer number and name.
3. Error Records with 'record number' and 'reason for error'
(For testing you just have to copy-paste-save-active the source code)
And I have encountered an issue over here in 3rd section-Record Number of Error Records.
The Record Number is for display the line number of that flat file line which in which error has occurred.
The Record Number Entries showing only 0 instead of showing line number of error entry .
I have used Function Module FORMAT_MESSAGE to capture the errors. But not able to display line number of that flat file which is containing error.
So please suggest me what changes I should make in below source code to get proper output.
Flat file for your R&D
1000 1000 10 10 0001 Company Chobey & Group1N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
1000 1000 10 10 0001 Company Chobey & Group2N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
1000 1000 10 10 0001 Company Chobey & Group3N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS . A 10 1
1000 1000 10 10 0001 Company Chobey & Group4N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A .. 1
1000 1000 10 10 0001 Company Chobey & Group5N Choubey Amit Choubey New Alipore Road Habijabi Apartment Rastar Dhra 777777 kolkata 777777 kolikata howrah 777777 IN WB 1111111111 2222222222 3333333333 4444444444 5555555555 6666666666 0700 EAST 02 01 1060003 A1 Z1 ZZ13 CALS 1 A 10 1
And Source Code
*& Report Z_TEST_SAI *
REPORT Z_TEST_SAI no standard page heading line-size 255.
TYPES: BEGIN OF t_cust,
bukrs like rf02d-bukrs,
vkorg like rf02d-vkorg,
vtweg like rf02d-vtweg,
spart like rf02d-spart,
ktokd like rf02d-ktokd,
anred like kna1-anred,
name1 like kna1-name1,
sortl like kna1-sortl,
name2 like kna1-name2,
name3 like kna1-name3,
name4 like kna1-name4,
stras like kna1-stras,
pfach like kna1-pfach,
ort01 like kna1-ort01,
pstlz like kna1-pstlz,
ort02 like kna1-ort02,
pfort like kna1-pfort,
pstl2 like kna1-pstl2,
land1 like kna1-land1,
regio like kna1-regio,
telx1 like kna1-telx1,
telf1 like kna1-telf1,
telfx like kna1-telfx,
telf2 like kna1-telf2,
teltx like kna1-teltx,
stceg like kna1-stceg,
cityc like kna1-cityc,
lzone like kna1-lzone,
niels like kna1-niels,
kukla like kna1-kukla,
akont like knb1-akont,
fdgrv like knb1-fdgrv,
vzskz like knb1-vzskz,
zterm like knb1-zterm,
vkbur like knvv-vkbur,
versg like knvv-versg,
vsbed like knvv-vsbed,
ktgrd like knvv-ktgrd,
taxkd like knvi-taxkd,
END OF t_cust.
TYPES: BEGIN OF t_sucrec,
cnum TYPE kna1-kunnr, "Customer Number
cnam TYPE kna1-name1, "Customer Name
END OF t_sucrec.
TYPES: BEGIN OF t_errrec,
* lineno TYPE i, "Line Number
lineno TYPE string,
message TYPE string, "Error Message
END OF t_errrec.
DATA: v_file TYPE string, "Variable for storing flat file
it_cust TYPE STANDARD TABLE OF t_cust, "Internal table of Customer
wa_cust LIKE LINE OF it_cust, "Workarea of Internal table it_cust
it_sucrec TYPE STANDARD TABLE OF t_sucrec, "Internal table of Success records
wa_sucrec LIKE LINE OF it_sucrec, "Workarea of Internal table it_sucrec
it_errrec TYPE STANDARD TABLE OF t_errrec,
wa_errrec LIKE LINE OF it_errrec,
it_bdctab LIKE bdcdata OCCURS 0 WITH HEADER LINE, "Internal table structure of BDCDATA
it_messagetab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE, "Tracing Error Messages
v_date LIKE sy-datum, "Controlling of session date
v_index LIKE sy-index, "Index Number
v_totrec TYPE i, "Total Records
v_errrec TYPE i, "Error Records
v_sucrec TYPE i, "Success Records
v_sesschk TYPE c. "Session maintenance
*& SELECTION-SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001 NO INTERVALS.
PARAMETERS: p_file TYPE rlgrap-filename. "rlgrap-filename is a predefined structure
SELECTION-SCREEN: END OF BLOCK blk1.
SELECTION-SCREEN: BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002 NO INTERVALS.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N',
p_update LIKE ctu_params-updmode DEFAULT 'A'.
SELECTION-SCREEN END OF BLOCK blk2.
*& INITIALIZATION
INITIALIZATION.
v_date = sy-datum - 1.
*& AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
FIELD_NAME = ' '
IMPORTING
file_name = p_file.
*& START-OF-SELECTION
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = it_cust
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc = 0.
*MESSAGE ID sy-msgid
*TYPE sy-msgty
*NUMBER sy-msgno
*WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& END-OF-SELECTION
END-OF-SELECTION.
v_index = sy-index.
LOOP AT it_cust INTO wa_cust.
perform bdc_dynpro using 'SAPMF02D' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KTOKD'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02D-BUKRS'
wa_cust-bukrs.
perform bdc_field using 'RF02D-VKORG'
wa_cust-vkorg.
perform bdc_field using 'RF02D-VTWEG'
wa_cust-vtweg.
perform bdc_field using 'RF02D-SPART'
wa_cust-spart.
perform bdc_field using 'RF02D-KTOKD'
wa_cust-ktokd.
perform bdc_dynpro using 'SAPMF02D' '0110'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-TELTX'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-ANRED'
wa_cust-anred.
perform bdc_field using 'KNA1-NAME1'
wa_cust-name1.
perform bdc_field using 'KNA1-SORTL'
wa_cust-sortl.
perform bdc_field using 'KNA1-NAME2'
wa_cust-name2.
perform bdc_field using 'KNA1-NAME3'
wa_cust-name3.
perform bdc_field using 'KNA1-NAME4'
wa_cust-name4.
perform bdc_field using 'KNA1-STRAS'
wa_cust-stras.
perform bdc_field using 'KNA1-PFACH'
wa_cust-pfach.
perform bdc_field using 'KNA1-ORT01'
wa_cust-ort01.
perform bdc_field using 'KNA1-PSTLZ'
wa_cust-pstlz.
perform bdc_field using 'KNA1-ORT02'
wa_cust-ort02.
perform bdc_field using 'KNA1-PFORT'
wa_cust-pfort.
perform bdc_field using 'KNA1-PSTL2'
wa_cust-pstl2.
perform bdc_field using 'KNA1-LAND1'
wa_cust-land1.
perform bdc_field using 'KNA1-REGIO'
wa_cust-regio.
perform bdc_field using 'KNA1-SPRAS'
'EN'.
perform bdc_field using 'KNA1-TELX1'
wa_cust-telx1.
perform bdc_field using 'KNA1-TELF1'
wa_cust-telf1.
perform bdc_field using 'KNA1-TELFX'
wa_cust-telfx.
perform bdc_field using 'KNA1-TELF2'
wa_cust-telf2.
perform bdc_field using 'KNA1-TELTX'
wa_cust-teltx.
perform bdc_dynpro using 'SAPMF02D' '0120'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-CITYC'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-STCEG'
wa_cust-stceg.
perform bdc_field using 'KNA1-CITYC'
wa_cust-cityc.
perform bdc_field using 'KNA1-LZONE'
wa_cust-lzone.
perform bdc_dynpro using 'SAPMF02D' '0125'.
perform bdc_field using 'BDC_CURSOR'
'KNA1-KUKLA'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNA1-NIELS'
wa_cust-niels.
perform bdc_field using 'KNA1-KUKLA'
wa_cust-kukla.
perform bdc_dynpro using 'SAPMF02D' '0130'.
perform bdc_field using 'BDC_CURSOR'
'KNBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0340'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0360'.
perform bdc_field using 'BDC_CURSOR'
'KNVK-NAMEV(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0210'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-VZSKZ'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNB1-AKONT'
wa_cust-akont.
perform bdc_field using 'KNB1-FDGRV'
wa_cust-fdgrv.
perform bdc_field using 'KNB1-VZSKZ'
wa_cust-vzskz.
perform bdc_dynpro using 'SAPMF02D' '0215'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNB1-ZTERM'
wa_cust-zterm.
perform bdc_dynpro using 'SAPMF02D' '0220'.
perform bdc_field using 'BDC_CURSOR'
'KNB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0230'.
perform bdc_field using 'BDC_CURSOR'
'KNB1-VRSNR'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_dynpro using 'SAPMF02D' '0610'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'BDC_CURSOR'
'RF02D-KUNNR'.
perform bdc_dynpro using 'SAPMF02D' '0310'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-VERSG'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-AWAHR'
'100'.
perform bdc_field using 'KNVV-VKBUR'
wa_cust-vkbur.
perform bdc_field using 'KNVV-WAERS'
'INR'.
perform bdc_field using 'KNVV-KALKS'
'1'.
perform bdc_field using 'KNVV-VERSG'
wa_cust-versg.
perform bdc_dynpro using 'SAPMF02D' '0315'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-VSBED'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-LPRIO'
perform bdc_field using 'KNVV-KZAZU'
'X'.
perform bdc_field using 'KNVV-VSBED'
wa_cust-vsbed.
perform bdc_field using 'KNVV-ANTLF'
'9'.
perform bdc_dynpro using 'SAPMF02D' '0320'.
perform bdc_field using 'BDC_CURSOR'
'KNVV-KTGRD'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVV-BOKRE'
'X'.
perform bdc_field using 'KNVV-KTGRD'
wa_cust-ktgrd.
perform bdc_dynpro using 'SAPMF02D' '1350'.
perform bdc_field using 'BDC_CURSOR'
'KNVI-TAXKD(01)'.
perform bdc_field using 'BDC_OKCODE'
'=VW'.
perform bdc_field using 'KNVI-TAXKD(01)'
wa_cust-taxkd.
perform bdc_dynpro using 'SAPMF02D' '0324'.
perform bdc_field using 'BDC_CURSOR'
'KNVP-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
CALL TRANSACTION 'XD01' USING it_bdctab
MODE p_mode
UPDATE p_update
MESSAGES INTO it_messagetab.
IF sy-subrc = 0.
*& reading success records to corresponding internal table
READ TABLE it_messagetab WITH KEY msgtyp = 'S'.
IF sy-subrc = 0.
wa_sucrec-cnum = it_messagetab-msgv1.
wa_sucrec-cnam = wa_cust-name1.
APPEND wa_sucrec TO it_sucrec.
CLEAR wa_sucrec.
ENDIF.
ELSE.
*& reading error records to corresponding internal table
READ TABLE it_messagetab WITH KEY msgtyp = 'E'.
IF sy-subrc = 0.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
no = it_messagetab-msgnr
v1 = it_messagetab-msgv1
v2 = it_messagetab-msgv2
v3 = it_messagetab-msgv3
v4 = it_messagetab-msgv4
IMPORTING
msg = wa_errrec-message.
wa_errrec-lineno = v_index.
*******wa_errrec-lineno = v_index.
*******wa_errrec-message = it_messagetab-msgv1.
APPEND wa_errrec TO it_errrec.
CLEAR wa_errrec.
ENDIF.
ENDIF.
CLEAR : it_bdctab, it_messagetab.
REFRESH: it_bdctab, it_messagetab.
ENDLOOP.
DESCRIBE TABLE it_cust LINES v_totrec.
DESCRIBE TABLE it_errrec LINES v_errrec.
DESCRIBE TABLE it_sucrec LINES v_sucrec.
PERFORM disp_data.
SKIP 2.
IF v_sucrec > 0.
PERFORM disp_success_data.
ENDIF.
SKIP 2.
IF v_errrec > 0.
PERFORM disp_error_data.
ENDIF.
*& Form bdc_dynpro
*# text
*# -->P_0104 text
*# -->P_0105 text
FORM bdc_dynpro USING program
dynpro.
CLEAR it_bdctab.
it_bdctab-program = program.
it_bdctab-dynpro = dynpro.
it_bdctab-dynbegin = 'X'.
APPEND it_bdctab.
ENDFORM. " bdc_dynpro
*& Form bdc_field
*# text
*# -->P_0109 text
*# -->P_IT_cust_LIFNR text
FORM bdc_field USING fnam
fval.
CLEAR it_bdctab.
it_bdctab-fnam = fnam.
it_bdctab-fval = fval.
APPEND it_bdctab.
ENDFORM. " bdc_field
*& Form disp_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_data .
ULINE (45).
WRITE : / sy-vline,
12 'FAMD CUSTOMER UPDATE SUMMARY'(004) COLOR 1,
45 sy-vline.
ULINE /(45).
WRITE : / sy-vline,
'Total Records Processed'(007),
28 '=',
30 v_totrec,
45 sy-vline,
/ sy-vline,
'Error Records'(005),
28 '=',
30 v_errrec,
45 sy-vline,
/ sy-vline,
'Successful Records'(006),
28 '=',
30 v_sucrec,
45 sy-vline.
ULINE /(45).
ENDFORM. " disp_data
*& Form disp_success_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_success_data .
ULINE (45).
WRITE : / sy-vline,
14 'Successful Records'(012) COLOR 1,
45 sy-vline.
ULINE /(45).
WRITE : / sy-vline ,
'Customer Number'(010) COLOR 2,
17 sy-vline,
25 'Customer Name'(011) COLOR 2,
45 sy-vline.
ULINE /(45).
LOOP AT it_sucrec INTO wa_sucrec.
WRITE: / sy-vline ,
wa_sucrec-cnum,
17 sy-vline,
19 wa_sucrec-cnam,
45 sy-vline.
ENDLOOP.
ULINE /(45).
ENDFORM. " disp_success_data
*& Form disp_error_data
*# text
*# --> p1 text
*# <-- p2 text
FORM disp_error_data .
ULINE (85).
WRITE : / sy-vline,
35 'Error Records'(013) COLOR 1,
85 sy-vline.
ULINE /(85).
WRITE : / sy-vline,
'Record Number'(008) COLOR 2,
sy-vline,
37 'Reason for error'(009) COLOR 2,
85 sy-vline.
ULINE /(85).
LOOP AT it_errrec INTO wa_errrec.
WRITE : / sy-vline,
wa_errrec-lineno,
17 sy-vline,
wa_errrec-message,
85 sy-vline.
ENDLOOP.
ULINE /(85).
ENDFORM. " disp_error_dataWorked out n found the solution
-
Not able to create a material document with movement type 103
I am not able to create a material document with movement type 103,
The system is populating the value as 101 .
How do I create a matdoc with movement type 103?What is the error you receive? Please specify with message number.
On MIGO, you need to change the default value mvmt type value to 103 before you enter the PO number to be able to do 103.
Once this defualt value is set, you can enter the PO and item number in the document number fields and proceed with 103.
But you cannot change the mvmt type for already entered items from 101-103 or vice versa.
I think the 101-103 and 103-101 mvmt type conversion message is standard error message -
Flash File not Able to Display using ADF Trinidad components..
Hi All,
I am trying to display a flash file using ADF trinidad component for one our project but not able to display when embeded inside the code.
However I am able to directly access the flash file using http://localhost:7101/test/pages/test.swf
The below Object code is included inside the tr:panelHorizontalLayout tag. I also tried using tr:media but doesnt display anything on the browser.
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
<param name="allowScriptAccess" value="sameDomain"/>
<param name="allowFullScreen" value="false"/>
<param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
<param name="quality" value="high"/>
<param name="bgcolor" value="#ffffff"/>
<embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
</object>-->
Thanks
ChetanHi Ramandeep,
I tried that option early but did not work. Not able to understand why.
Below is the code snippet.
<tr:panelGroupLayout layout="vertical">
<tr:panelHorizontalLayout>
<!--Some Portlets are added-->
<f:verbatim>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
<param name="allowScriptAccess" value="sameDomain"/>
<param name="allowFullScreen" value="false"/>
<param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
<param name="quality" value="high"/>
<param name="bgcolor" value="#ffffff"/>
<embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
</object>
</f:verbatim>
</tr:panelHorizontalLayout>
</tr:panelGroupLayout>
And as I mentioned it works fine when I directly access the flash file by using http://localhost:7101/test/pages/test.swf.
Thanks
Chetan -
Not able to display error message in PR creation.
HI Experts,
In PR creation process i am not able to display error message.
BADI: ME_PROCESS_REQ_CUST
method : PROCESS_ACCOUNT, PROCESS_ITEM
I have used Include mm_messages_mac for handling error .
MESSAGE e112(XXX) WITH XX-XX. this is my error message.
even tried this also mmpur_message 'W' 'ZMM_PUR' '001' '' '' '' ''.
Please provide solution for this.
Regards,
JayantHi,
In devepoment system im able to display the message but not in quality,code is 100% algined with quality.
In quality system error message is being executed but not displayed,i mean control is comming out after the error message.
i am using
message EXXX(XXX).
regards,
Jayant. -
Not able to display javascript alert message from within a pl/sql block
Hello,
Can anyone please help me out with this issue. I wanted to display an javascript alert message from within a pl/sql block for an update button. Below is sample code which i am using. P1_ITEM is my hidden item on the report.
begin
if :P1_ITEM IS NOT NULL then
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
HTP.p ('</script>');
end if;
end;
and I have made this code to be executed conditionally when request = Expression1
Expression1: SUBMIT
The thing is I am not able to display an alert message when the update button is clicked.
Can anyone please help me with this one.
Thanks,
Ortonvarad but I also have an update statement within that block for the update button something like this i want to achieve.
begin
if :P1_ITEM IS NULL THEN
update sample_tbl
set col1 =:APP_USER,
col2 = 'Y'
where pk_col = ---;
commit;
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Successfully assigned an item!'');');
HTP.p ('</script>');
end if;
if :P1_ITEM IS NOT NULL then
HTP.p ('<script type="text/javascript">');
HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
HTP.p ('</script>');
end if;
end;
thanks,
Orton -
Not able to attach final signed document in the contract document
Dear Experts,
The upload field for final signed document in the contract document is visible only for the latest/last contract document if there are more than one contract document exist in the Master Agreement.
For the previous contract documents, not able to attach final signed document (i.e) the upload field is invisible.This scenario is occuring only in few master agreements, mostly found in Legacy agreement types.But for newly created legacy agreements this scenario is not occuring.Please help me in finding out why the upload field is visible only for the last/latest and not for the previous ones.Hi Dinesh,
Did you find a solution to this?
Regards,
NR -
Not able to add Select Supported Document Types
Hi
I am new to Oracle B2B.
Going through the steps given in the tutorial http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/b2b_tps.htm#BABGAJDE
Completed till 5.3 - Task 2 (Add a User in the Oracle B2B Interface)
And the Next thing,
I am not able to Add Select Supported Document Types.When I click on the "Add supported document type for the selected user", i can see "CUSTOM", "EDI_EDIFACT" etc... but in that screen my "Add" Button was disabled.
Please let me know how to proceed with this.
Thanks,
Deepthi.
Edited by: 796969 on 27/09/2010 14:11Hi Deepthi,
You can download the samples from below location. Samples also has document for step by step configuraion:
B2B Samples are part of SOA samples:
http://www.oracle.com/technology/sample_code/products/soa/index.html
Developer Notes / Step by Step configuration guide:
http://www.oracle.com/technology/products/soa/b2b/index.html
http://www.oracle.com/technology/products/soa/b2b/collateral/B2B_TU001_EDI.pdf
http://www.oracle.com/technology/products/soa/b2b/collateral/B2B_TU002_HL7.pdf
http://www.oracle.com/technology/products/soa/b2b/collateral/B2B_TU003_ebxml.pdf
http://blogs.oracle.com/oracleb2bgurus/2010/04/oracle_b2b_started_kit.html
Please let us know which usecase you are trying for more details.
Rgds,
Nitesh Jain
[email protected] -
Not able to display line item 20 in contract
I could not able to display line item 20 in the contract document.
line item 10 and 30is there however there is no line item 30. What could be reason and how to enable the same.
MRSIt may also possible if user forgot to enter the line item 20 and jump to line item 30 after 10 as below.
Then system will show as like this -
Not able to find userChrome.css file for customizing the Firefox browser. I just installed 20.0.1 Firefox browser version.
I want to disable/remove navigation bar from the browser window, making the browser to work like kiosk mode.
Please Help,
Thanks,
Vishal.hello,
here is the complete path ..
''C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\chrome"
Let me know
Thanks,
Vishal. -
Can't display archive change documents for agreement (COND_B)
Hello,
I want to display archive change document for object class : COND_B (agreement) via transaction MEB3:
The archive works fine, and I can found the archive change documents form SARA.
(Archive Objetc = CHANGEDOCU
Archive info structure = SAP_CHANGEDOCU2 (is active))
But the display from the application transaction : MEB3 doesn't work.
In the DEBUG:
the Function module is called automatiquely: COND_B_DISPLAY_DOCUMENT
THEN SUBMIT RSSCD100
THEN The function module is called with the no parameter READ_CHANGEDOCU (ie with space value)
THEN the program reads only from DB
Question : HOW I oblige the program to read from the archive (READ_CHANGEDOCU = 'X') ?
I checked these SAP notes 1050935,1299903, 1308024, 1128954, 1050335
but no results.
May be I forgot some customizing ( SARA,, AOBJ )?
Thanks for your help.Hi,
As I understand, the change documents archived using the CHANGEDOCU archiving object are no longer available using the application object.
Refer to Notes 1257133 and 140255 where they mention the above point.
If you want to read change documents along with the application, then you must first archive the change documents along with the application.
In your case, for agreements, you should use object SD_AGREEM so that the change documents also gets archived along with the agreements. Refer to note 761281 to check whether the archiving class CHANGEDOCU is already defined along with object SD_AGREEM in your system.
Hope this helps,
Naveen -
OAF page is not able to display the custom error messages
Hi,
I have extended a seeded CO and trying to throw few custom error messages.
It was working fine, but suddenly it is not able to display the error messages(but checked that the error messages are still present in application) and saying "Message not found. Application: PER, Message Name: ...."
Is there any profile option which enables the custom messages?
Thanks,
RanitaHi,
There is no profile to enable the Custom error Messages, u will use the diagnostistics for showing the messages in the custom page
use the following syntax for writing a msg in Jdeveloper
pageContext.writeDiagnostics(strClassName, "Initializing the vo....", OAWebBeanConstants.STATEMENT);
and enable the following profile option to yes
Fnd:Diagnostics
Regards
Chanu -
Hi All
I am working on IBase scenario for my client, I am new to the IBase scenario. Here we are creating installation base for two to five levels of product.
Once we create IBase for lower level then this IBase is inserted in upper level IBase. Like this we assign all levels based on product.In some cases we need to unassign any of IBase from its upper level IBase. When it is unassigned we are not able to display the IBase which unassigned. When it is unassigned from upper level how come system not able to display this IBase. If we speak functionally the part (IBase) which is unassigned should be valid to assign in any other upper level IBase in feature.
The error I am getting for above is
Serial number XXXXXXX for material XXXXXXX does not exist in any IBase
Message no. IQ122
Diagnosis
Serial number BMF3000106 for material S24-D5022-C100-6 does not exist in any installed base on 31.03.2015 at 10:22:09.
System Response
The system cancels processing.
Hi experts please suggest.
Regards
KesavaHello Kesava
Can you please explain in detail what exactly you are trying to do while assigning and unassigning Ibase.
Regards
Naresh
Maybe you are looking for
-
Hp Color LaserJet CP2025n printing a yellow band down the right hand side,
I have a Hp Color LaserJet CP2025n running on a Desk top computer OS win 7 64bit, printer Serial Number [edited Serial Number by Moderator] and another number on the label CB494A, The printer has started printing a yellow band 1.5 cm wide all the way
-
Adobe Color CC color theme looks different in Illustrator
Whenever I import color themes from Adobe Color CC, they look different in Illustrator. The cmyk values are the identical but the colors just aren't the same. I guess it has something to do with my color settings in Illustrator but I can't figure out
-
So i brought a new computer and want to use my ipod mini, however i lost the installation cd. Ive downloaded the ipod installer and itunes but my computer doesnt recognize my ipod D:
-
Using Skype from a Cellphone - not a true Smartpho...
I need to access and use Skype from overseas, and am considering buying a a Chinese phone called the X10. It's an unlocked quad-band GSM phone - which is fine - supports GPRS & WiFi, but is not 3G. It supports Java but is not Android. Can anyone te
-
MacBook Pro (OS X 10.9.1) calendar continues to "connect to server" and will not allow shut down or restart. Force quit worked. How can I make this calendar usable? The problem began after I updated to Maverick.