Not able to Display Information message fully

Hi Gurus,
Here I hav some problem in displaying a information message in the output.
My requirment is to display a information message--->
MESSAGE i008(zmsgkc1) with 'Chapter Id is not updated Please log a complain with IBM Helpdesk with ChapterID no'.
fully in the output of program
BUT
while we r executing it it is showing information message in the  o/p like with below fragmented text
'Chapter Id is not updated Please log a complain wi'
As we know maximum character limit for displayin info messge is 72 but if it is more than 72 like my case how should i approach to solve the problem.
Is there any other way to display my full message what i mentioned above ???
pls hlp
Regards
Saifur Rahaman

Hi Saifur Rahaman.
Try the following code and Function Module.
CONSTANTS: c_msg1 TYPE string VALUE 'Chapter Id is not updated',
           c_msg2 TYPE string VALUE 'Please log a complaint with IBM',
           c_msg3 TYPE string VALUE 'Helpdesk with ChapterID no'.
CALL FUNCTION 'C14Z_MESSAGES_SHOW_AS_POPUP'
EXPORTING
   I_MSGID             = '0'
   I_MSGTY             = 'I'
   I_MSGNO             = '000'
   I_MSGV1             = c_msg1
   I_MSGV2             = c_msg2
   I_MSGV3             = c_msg3.
You'll get a pop up with the information message. If you click on the information message you can see the entire message.
Hope that this helps you with your requirement. Reward accordingly.
Thanks and Regards,
Maddineni Bharath.

Similar Messages

  • Not able to display error message in PR creation.

    HI Experts,
    In PR creation process i am not able to display error message.
    BADI: ME_PROCESS_REQ_CUST
    method : PROCESS_ACCOUNT, PROCESS_ITEM
    I have used Include mm_messages_mac for handling error .
    MESSAGE e112(XXX) WITH XX-XX. this is my error message.
    even tried this also  mmpur_message 'W' 'ZMM_PUR' '001' '' '' '' ''.
    Please provide solution for this.
    Regards,
    Jayant

    Hi,
    In devepoment system im able to display the message but not in quality,code is 100% algined with quality.
    In quality system error message is being executed but not displayed,i mean control is comming out after the error message.
    i am using
    message EXXX(XXX).
    regards,
    Jayant.

  • Not able to display javascript alert message from within a pl/sql block

    Hello,
    Can anyone please help me out with this issue. I wanted to display an javascript alert message from within a pl/sql block for an update button. Below is sample code which i am using. P1_ITEM is my hidden item on the report.
    begin
    if :P1_ITEM IS NOT NULL then
    HTP.p ('<script type="text/javascript">');
    HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
    HTP.p ('</script>');
    end if;
    end;
    and I have made this code to be executed conditionally when request = Expression1
    Expression1: SUBMIT
    The thing is I am not able to display an alert message when the update button is clicked.
    Can anyone please help me with this one.
    Thanks,
    Orton

    varad but I also have an update statement within that block for the update button something like this i want to achieve.
    begin
    if :P1_ITEM IS NULL THEN
    update sample_tbl
    set col1 =:APP_USER,
    col2 = 'Y'
    where pk_col = ---;
    commit;
    HTP.p ('<script type="text/javascript">');
    HTP.p ('alert(''Successfully assigned an item!'');');
    HTP.p ('</script>');
    end if;
    if :P1_ITEM IS NOT NULL then
    HTP.p ('<script type="text/javascript">');
    HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
    HTP.p ('</script>');
    end if;
    end;
    thanks,
    Orton

  • OAF page is not able to display the custom error messages

    Hi,
    I have extended a seeded CO and trying to throw few custom error messages.
    It was working fine, but suddenly it is not able to display the error messages(but checked that the error messages are still present in application) and saying "Message not found. Application: PER, Message Name: ...."
    Is there any profile option which enables the custom messages?
    Thanks,
    Ranita

    Hi,
    There is no profile to enable the Custom error Messages, u will use the diagnostistics for showing the messages in the custom page
    use the following syntax for writing a msg in Jdeveloper
    pageContext.writeDiagnostics(strClassName, "Initializing the vo....", OAWebBeanConstants.STATEMENT);
    and enable the following profile option to yes
    Fnd:Diagnostics
    Regards
    Chanu

  • Not able to display flat file's error line in output

    The below Source Code is BDC for XD01 (update Customer Master Record) in CALL TRANSACTION method. This program is written in call transaction method cause as per user’s requirement, user wants error log to be printed as soon as the BDC process finished in the background mode.
    When you execute this below program it will show a selection screen from where you can select your flat file from system.
    After executing this code show output like below as soon as it finished processing the FLAT file.
    1. Customer Update Summary
    2. Successful record with customer number and name.
    3. Error Records with 'record number' and 'reason for error'
    (For testing you just have to copy-paste-save-active  the source code)
    And I have encountered an issue over here in 3rd section-“Record Number” of “Error Records”.
    The “Record Number” is for display the line number of that flat file line which in which error has occurred.
    The “Record Number”  Entries showing only ‘0’ instead of showing line number of error entry .
    I have used Function Module FORMAT_MESSAGE to capture the errors. But not able to display line number of that flat file which is containing error.
    So please suggest me what changes I should make in below source code to get proper output.
    Flat file for your R&D
    1000     1000     10     10     0001     Company     Chobey & Group1N     Choubey     Amit Choubey     New Alipore Road     Habijabi Apartment     Rastar Dhra      777777     kolkata     777777     kolikata     howrah     777777     IN     WB     1111111111     2222222222     3333333333     4444444444     5555555555     6666666666     0700     EAST     02     01     1060003     A1     Z1     ZZ13     CALS     1     A     10     1
    1000     1000     10     10     0001     Company     Chobey & Group2N     Choubey     Amit Choubey     New Alipore Road     Habijabi Apartment     Rastar Dhra      777777     kolkata     777777     kolikata     howrah     777777     IN     WB     1111111111     2222222222     3333333333     4444444444     5555555555     6666666666     0700     EAST     02     01     1060003     A1     Z1     ZZ13     CALS     1     A     10     1
    1000     1000     10     10     0001     Company     Chobey & Group3N     Choubey     Amit Choubey     New Alipore Road     Habijabi Apartment     Rastar Dhra      777777     kolkata     777777     kolikata     howrah     777777     IN     WB     1111111111     2222222222     3333333333     4444444444     5555555555     6666666666     0700     EAST     02     01     1060003     A1     Z1     ZZ13     CALS     .     A     10     1
    1000     1000     10     10     0001     Company     Chobey & Group4N     Choubey     Amit Choubey     New Alipore Road     Habijabi Apartment     Rastar Dhra      777777     kolkata     777777     kolikata     howrah     777777     IN     WB     1111111111     2222222222     3333333333     4444444444     5555555555     6666666666     0700     EAST     02     01     1060003     A1     Z1     ZZ13     CALS     1     A     ..     1
    1000     1000     10     10     0001     Company     Chobey & Group5N     Choubey     Amit Choubey     New Alipore Road     Habijabi Apartment     Rastar Dhra      777777     kolkata     777777     kolikata     howrah     777777     IN     WB     1111111111     2222222222     3333333333     4444444444     5555555555     6666666666     0700     EAST     02     01     1060003     A1     Z1     ZZ13     CALS     1     A     10     1
    And Source Code
    *& Report  Z_TEST_SAI                                                  *
    REPORT  Z_TEST_SAI no standard page heading line-size 255.
    TYPES: BEGIN OF t_cust,
            bukrs like rf02d-bukrs,
            vkorg like rf02d-vkorg,
            vtweg like rf02d-vtweg,
            spart like rf02d-spart,
            ktokd like rf02d-ktokd,
            anred like kna1-anred,
            name1 like kna1-name1,
            sortl like kna1-sortl,
            name2 like kna1-name2,
            name3 like kna1-name3,
            name4 like kna1-name4,
            stras like kna1-stras,
            pfach like kna1-pfach,
            ort01 like kna1-ort01,
            pstlz like kna1-pstlz,
            ort02 like kna1-ort02,
            pfort like kna1-pfort,
            pstl2 like kna1-pstl2,
            land1 like kna1-land1,
            regio like kna1-regio,
            telx1 like kna1-telx1,
            telf1 like kna1-telf1,
            telfx like kna1-telfx,
            telf2 like kna1-telf2,
            teltx like kna1-teltx,
            stceg like kna1-stceg,
            cityc like kna1-cityc,
            lzone like kna1-lzone,
            niels like kna1-niels,
            kukla like kna1-kukla,
            akont like knb1-akont,
            fdgrv like knb1-fdgrv,
            vzskz like knb1-vzskz,
            zterm like knb1-zterm,
            vkbur like knvv-vkbur,
            versg like knvv-versg,
            vsbed like knvv-vsbed,
            ktgrd like knvv-ktgrd,
            taxkd like knvi-taxkd,
    END OF t_cust.
    TYPES: BEGIN OF t_sucrec,
              cnum TYPE kna1-kunnr,                          "Customer Number
              cnam TYPE kna1-name1,                          "Customer Name
    END OF t_sucrec.
    TYPES: BEGIN OF t_errrec,
    *        lineno TYPE i,                                  "Line Number
             lineno TYPE string,
           message TYPE string,                              "Error Message
    END OF t_errrec.
    DATA: v_file TYPE string,                                "Variable for storing flat file
    it_cust TYPE STANDARD TABLE OF t_cust,                   "Internal table of Customer
    wa_cust LIKE LINE OF it_cust,                            "Workarea of Internal table it_cust
    it_sucrec TYPE STANDARD TABLE OF t_sucrec,               "Internal table of Success records
    wa_sucrec LIKE LINE OF it_sucrec,                        "Workarea of Internal table it_sucrec
    it_errrec TYPE STANDARD TABLE OF t_errrec,
    wa_errrec LIKE LINE OF it_errrec,
    it_bdctab LIKE bdcdata OCCURS 0 WITH HEADER LINE,        "Internal table structure of BDCDATA
    it_messagetab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE, "Tracing Error Messages
    v_date LIKE sy-datum,                                    "Controlling of session date
    v_index LIKE sy-index,                                   "Index Number
    v_totrec TYPE i,                                         "Total Records
    v_errrec TYPE i,                                         "Error Records
    v_sucrec TYPE i,                                         "Success Records
    v_sesschk TYPE c.                                        "Session maintenance
    *& SELECTION-SCREEN
    SELECTION-SCREEN: BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001 NO INTERVALS.
    PARAMETERS: p_file    TYPE rlgrap-filename.              "rlgrap-filename is a predefined structure
    SELECTION-SCREEN: END OF BLOCK blk1.
    SELECTION-SCREEN: BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002 NO INTERVALS.
    PARAMETERS: p_mode    LIKE ctu_params-dismode DEFAULT 'N',
                p_update  LIKE ctu_params-updmode DEFAULT 'A'.
    SELECTION-SCREEN END OF BLOCK blk2.
    *& INITIALIZATION
    INITIALIZATION.
    v_date = sy-datum - 1.
    *& AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
    program_name = syst-cprog
    dynpro_number = syst-dynnr
    FIELD_NAME = ' '
    IMPORTING
    file_name = p_file.
    *& START-OF-SELECTION
    START-OF-SELECTION.
    v_file = p_file.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = v_file
    filetype = 'ASC'
    has_field_separator = 'X'
    TABLES
    data_tab = it_cust
    EXCEPTIONS
    file_open_error = 1
    file_read_error = 2
    no_batch = 3
    gui_refuse_filetransfer = 4
    invalid_type = 5
    no_authority = 6
    unknown_error = 7
    bad_data_format = 8
    header_not_allowed = 9
    separator_not_allowed = 10
    header_too_long = 11
    unknown_dp_error = 12
    access_denied = 13
    dp_out_of_memory = 14
    disk_full = 15
    dp_timeout = 16
    OTHERS = 17.
    IF sy-subrc = 0.
    *MESSAGE ID sy-msgid
    *TYPE sy-msgty
    *NUMBER sy-msgno
    *WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    *& END-OF-SELECTION
    END-OF-SELECTION.
    v_index = sy-index.
    LOOP AT it_cust INTO wa_cust.
      perform bdc_dynpro      using 'SAPMF02D' '0100'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'RF02D-KTOKD'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '/00'.
        perform bdc_field       using 'RF02D-BUKRS'
                                      wa_cust-bukrs.
        perform bdc_field       using 'RF02D-VKORG'
                                      wa_cust-vkorg.
        perform bdc_field       using 'RF02D-VTWEG'
                                      wa_cust-vtweg.
        perform bdc_field       using 'RF02D-SPART'
                                      wa_cust-spart.
        perform bdc_field       using 'RF02D-KTOKD'
                                      wa_cust-ktokd.
        perform bdc_dynpro      using 'SAPMF02D' '0110'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNA1-TELTX'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNA1-ANRED'
                                      wa_cust-anred.
        perform bdc_field       using 'KNA1-NAME1'
                                      wa_cust-name1.
        perform bdc_field       using 'KNA1-SORTL'
                                      wa_cust-sortl.
        perform bdc_field       using 'KNA1-NAME2'
                                      wa_cust-name2.
        perform bdc_field       using 'KNA1-NAME3'
                                      wa_cust-name3.
        perform bdc_field       using 'KNA1-NAME4'
                                      wa_cust-name4.
        perform bdc_field       using 'KNA1-STRAS'
                                      wa_cust-stras.
        perform bdc_field       using 'KNA1-PFACH'
                                      wa_cust-pfach.
        perform bdc_field       using 'KNA1-ORT01'
                                      wa_cust-ort01.
        perform bdc_field       using 'KNA1-PSTLZ'
                                      wa_cust-pstlz.
        perform bdc_field       using 'KNA1-ORT02'
                                      wa_cust-ort02.
        perform bdc_field       using 'KNA1-PFORT'
                                      wa_cust-pfort.
        perform bdc_field       using 'KNA1-PSTL2'
                                      wa_cust-pstl2.
        perform bdc_field       using 'KNA1-LAND1'
                                      wa_cust-land1.
        perform bdc_field       using 'KNA1-REGIO'
                                      wa_cust-regio.
        perform bdc_field       using 'KNA1-SPRAS'
                                      'EN'.
        perform bdc_field       using 'KNA1-TELX1'
                                      wa_cust-telx1.
        perform bdc_field       using 'KNA1-TELF1'
                                      wa_cust-telf1.
        perform bdc_field       using 'KNA1-TELFX'
                                      wa_cust-telfx.
        perform bdc_field       using 'KNA1-TELF2'
                                      wa_cust-telf2.
        perform bdc_field       using 'KNA1-TELTX'
                                      wa_cust-teltx.
        perform bdc_dynpro      using 'SAPMF02D' '0120'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNA1-CITYC'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNA1-STCEG'
                                      wa_cust-stceg.
        perform bdc_field       using 'KNA1-CITYC'
                                      wa_cust-cityc.
        perform bdc_field       using 'KNA1-LZONE'
                                      wa_cust-lzone.
        perform bdc_dynpro      using 'SAPMF02D' '0125'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNA1-KUKLA'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNA1-NIELS'
                                      wa_cust-niels.
        perform bdc_field       using 'KNA1-KUKLA'
                                      wa_cust-kukla.
        perform bdc_dynpro      using 'SAPMF02D' '0130'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNBK-BANKS(01)'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_dynpro      using 'SAPMF02D' '0340'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'RF02D-KUNNR'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_dynpro      using 'SAPMF02D' '0360'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVK-NAMEV(01)'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_dynpro      using 'SAPMF02D' '0210'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNB1-VZSKZ'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNB1-AKONT'
                                      wa_cust-akont.
        perform bdc_field       using 'KNB1-FDGRV'
                                      wa_cust-fdgrv.
        perform bdc_field       using 'KNB1-VZSKZ'
                                      wa_cust-vzskz.
        perform bdc_dynpro      using 'SAPMF02D' '0215'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNB1-ZTERM'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNB1-ZTERM'
                                      wa_cust-zterm.
        perform bdc_dynpro      using 'SAPMF02D' '0220'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNB5-MAHNA'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_dynpro      using 'SAPMF02D' '0230'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNB1-VRSNR'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_dynpro      using 'SAPMF02D' '0610'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'RF02D-KUNNR'.
        perform bdc_dynpro      using 'SAPMF02D' '0310'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVV-VERSG'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNVV-AWAHR'
                                      '100'.
        perform bdc_field       using 'KNVV-VKBUR'
                                      wa_cust-vkbur.
        perform bdc_field       using 'KNVV-WAERS'
                                      'INR'.
        perform bdc_field       using 'KNVV-KALKS'
                                      '1'.
        perform bdc_field       using 'KNVV-VERSG'
                                      wa_cust-versg.
        perform bdc_dynpro      using 'SAPMF02D' '0315'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVV-VSBED'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNVV-LPRIO'
        perform bdc_field       using 'KNVV-KZAZU'
                                      'X'.
        perform bdc_field       using 'KNVV-VSBED'
                                      wa_cust-vsbed.
        perform bdc_field       using 'KNVV-ANTLF'
                                      '9'.
        perform bdc_dynpro      using 'SAPMF02D' '0320'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVV-KTGRD'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNVV-BOKRE'
                                      'X'.
        perform bdc_field       using 'KNVV-KTGRD'
                                      wa_cust-ktgrd.
        perform bdc_dynpro      using 'SAPMF02D' '1350'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVI-TAXKD(01)'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNVI-TAXKD(01)'
                                      wa_cust-taxkd.
        perform bdc_dynpro      using 'SAPMF02D' '0324'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVP-PARVW(01)'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=UPDA'.
    CALL TRANSACTION 'XD01' USING it_bdctab
    MODE p_mode
    UPDATE p_update
    MESSAGES INTO it_messagetab.
    IF sy-subrc = 0.
    *& reading success records to corresponding internal table
    READ TABLE it_messagetab WITH KEY msgtyp = 'S'.
    IF sy-subrc = 0.
    wa_sucrec-cnum = it_messagetab-msgv1.
    wa_sucrec-cnam = wa_cust-name1.
    APPEND wa_sucrec TO it_sucrec.
    CLEAR wa_sucrec.
    ENDIF.
    ELSE.
    *& reading error records to corresponding internal table
    READ TABLE it_messagetab WITH KEY msgtyp = 'E'.
    IF sy-subrc = 0.
    CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
    id = sy-msgid
    no = it_messagetab-msgnr
    v1 = it_messagetab-msgv1
    v2 = it_messagetab-msgv2
    v3 = it_messagetab-msgv3
    v4 = it_messagetab-msgv4
    IMPORTING
    msg = wa_errrec-message.
    wa_errrec-lineno = v_index.
    *******wa_errrec-lineno  = v_index.
    *******wa_errrec-message = it_messagetab-msgv1.
    APPEND wa_errrec TO it_errrec.
    CLEAR wa_errrec.
    ENDIF.
    ENDIF.
    CLEAR : it_bdctab, it_messagetab.
    REFRESH: it_bdctab, it_messagetab.
    ENDLOOP.
    DESCRIBE TABLE it_cust LINES v_totrec.
    DESCRIBE TABLE it_errrec LINES v_errrec.
    DESCRIBE TABLE it_sucrec LINES v_sucrec.
    PERFORM disp_data.
    SKIP 2.
    IF v_sucrec > 0.
    PERFORM disp_success_data.
    ENDIF.
    SKIP 2.
    IF v_errrec > 0.
    PERFORM disp_error_data.
    ENDIF.
    *& Form bdc_dynpro
    *#  text
    *#  -->P_0104 text
    *#  -->P_0105 text
    FORM bdc_dynpro USING program
    dynpro.
    CLEAR it_bdctab.
    it_bdctab-program = program.
    it_bdctab-dynpro = dynpro.
    it_bdctab-dynbegin = 'X'.
    APPEND it_bdctab.
    ENDFORM. " bdc_dynpro
    *& Form bdc_field
    *#  text
    *#  -->P_0109 text
    *#  -->P_IT_cust_LIFNR text
    FORM bdc_field USING fnam
    fval.
    CLEAR it_bdctab.
    it_bdctab-fnam = fnam.
    it_bdctab-fval = fval.
    APPEND it_bdctab.
    ENDFORM. " bdc_field
    *& Form disp_data
    *#  text
    *#  --> p1 text
    *#  <-- p2 text
    FORM disp_data .
    ULINE (45).
    WRITE : / sy-vline,
    12 'FAMD CUSTOMER UPDATE SUMMARY'(004) COLOR 1,
    45 sy-vline.
    ULINE /(45).
    WRITE : / sy-vline,
    'Total Records Processed'(007),
    28 '=',
    30 v_totrec,
    45 sy-vline,
    / sy-vline,
    'Error Records'(005),
    28 '=',
    30 v_errrec,
    45 sy-vline,
    / sy-vline,
    'Successful Records'(006),
    28 '=',
    30 v_sucrec,
    45 sy-vline.
    ULINE /(45).
    ENDFORM. " disp_data
    *& Form disp_success_data
    *#  text
    *#  --> p1 text
    *#  <-- p2 text
    FORM disp_success_data .
    ULINE (45).
    WRITE : / sy-vline,
    14 'Successful Records'(012) COLOR 1,
    45 sy-vline.
    ULINE /(45).
    WRITE : / sy-vline ,
    'Customer Number'(010) COLOR 2,
    17 sy-vline,
    25 'Customer Name'(011) COLOR 2,
    45 sy-vline.
    ULINE /(45).
    LOOP AT it_sucrec INTO wa_sucrec.
    WRITE: / sy-vline ,
    wa_sucrec-cnum,
    17 sy-vline,
    19 wa_sucrec-cnam,
    45 sy-vline.
    ENDLOOP.
    ULINE /(45).
    ENDFORM. " disp_success_data
    *& Form disp_error_data
    *#  text
    *#  --> p1 text
    *#  <-- p2 text
    FORM disp_error_data .
    ULINE (85).
    WRITE : / sy-vline,
    35 'Error Records'(013) COLOR 1,
    85 sy-vline.
    ULINE /(85).
    WRITE : / sy-vline,
    'Record Number'(008) COLOR 2,
    sy-vline,
    37 'Reason for error'(009) COLOR 2,
    85 sy-vline.
    ULINE /(85).
    LOOP AT it_errrec INTO wa_errrec.
    WRITE : / sy-vline,
    wa_errrec-lineno,
    17 sy-vline,
    wa_errrec-message,
    85 sy-vline.
    ENDLOOP.
    ULINE /(85).
    ENDFORM. " disp_error_data

    Worked out n found the solution

  • Not able to display the Installation Base of once it unassigned from upper level Installation IBase.

    Hi All
    I am working on IBase scenario for my client, I am new to the IBase scenario. Here we are creating installation base for two to five levels of product.
    Once we create IBase for lower level then this IBase is inserted in upper level IBase. Like this we assign all levels based on product.In some cases we need to unassign any of IBase from its upper level IBase. When it is unassigned we are not able to display the IBase which unassigned. When it is unassigned from upper level how come system not able to display this IBase. If we speak functionally the part (IBase) which is unassigned should be valid to assign in any other upper level IBase in feature.
    The error I am getting for above is
    Serial number XXXXXXX for material XXXXXXX does not exist in any IBase
    Message no. IQ122
    Diagnosis
    Serial number BMF3000106 for material S24-D5022-C100-6 does not exist in any installed base on 31.03.2015 at 10:22:09.
    System Response
    The system cancels processing.
    Hi experts please suggest.
    Regards
    Kesava

    Hello Kesava
    Can you please explain in detail what exactly you are trying to do while assigning and unassigning Ibase.
    Regards
    Naresh

  • Not able to display the image on the popup.

    hi,
    my requirement is: i have command link on the form.which on clicked should display a popup and with in that popup a image should be shown. I have stored that image in the form of byte array.
    On clicking the link i am able to show the popup.But,not able to display the image on the popup.
    thanks in advance.
    Srikanth.V

    Hi,
    how do you access the image? Put yourself in our shoes and look at your question and then add the missing information. E.g. does the image show if loaded on a page itself and not a popup ?
    Frank

  • Not able to display logo on alv grid output

    hi
    can anybody guide me.
    i have written code for displaying logo on alv grid report.
    i uploaded bmp image using OAER
    but even then i am not able to display logo on the report please help me
    i am using 4.7 version..
    code...
    REPORT  ZALVLOGO                                .
    type-pools: slis.
    data: i_sflight type table of sflight.
    *data: begin of i_sflight occurs 10.
    *include structure sflight.
    *data: end of i_sflight.
    data: it_events type slis_t_event,
           wa_events type slis_alv_event.
    select * from sflight into table i_sflight.
    perform form_fill_table.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
       I_CALLBACK_TOP_OF_PAGE            = 'top-of-page'
       I_STRUCTURE_NAME                  = 'sflight'
      TABLES
        T_OUTTAB                          = i_sflight
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *&      Form  top_of_page
          text
    -->  p1        text
    <--  p2        text
    FORM top-of-page .
    data: t_header type slis_t_listheader,
          wa_header type slis_listheader.
    wa_header-typ = 'h'.
    wa_header-info = 'FLIGHT DETAILS'.
    APPEND wa_header to t_header.
    CLEAR WA_HEADER.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        IT_LIST_COMMENTARY       = t_header
        I_LOGO                   = 'ENJOY'.
      I_END_OF_LIST_GRID       =.
    ENDFORM.                    " top_of_page
    *&      Form  form_fill_table
          text
    -->  p1        text
    <--  p2        text
    FORM form_fill_table .
    clear wa_events.
    wa_events-name = 'top-op-page1'.
    wa_events-form = 'top-of-page'.
    append wa_events to it_events.
    ENDFORM.                    " form_fill_table

    hi ,
    First upload images  in SAP using transaction se78
    http://www.howforge.com/step-by-step-upload-bitmap-images-to-sap
    Then use that Image name to call using function module 
    in top of -page 
    call function 'REUSE_ALV_COMMENTARY_WRITE'
          exporting
            i_logo             = 'KAL1_LOGO'
            it_list_commentary = lt_top_of_page_no_sel.
    Regards
    Deepak.

  • IE02 not able to display class overview & measuring point/counter tab,

    Hi Dear,
    I am not able to display class overview & Measuring point/counter tab in T-code IE02.
    But it is display in IE01 & IE03.
    Kindly suggest

    Mayursinh Dayatar,
    Its probably an authorisation issue.
    Are there any error messages??
    PeteA

  • A component is not able to display Image UIElements anymore

    Dear Developers,
    I am discovering today that a component that I have developped is not able to display the Image UIElement anymore. In the workbench, the element is displayed correctly ( it has no binding of its attributes to the context and the URL of the source is static).
    Its parent container is the ROOTUIELEMENTCONTAINER and it is visible (all parameters are the default).
    No Image can be displayed anymore. This is very strange. My other UIelements in the view are displayed correctly and seem to be working nicely (events, actions, methods calls ...).
    Can you help me ?
    Best Regards,
    Olivier MATT
    PS: I tried accessing the same URL with a Image UIElement in another component and it works fine.  It seems that the generated coding Javascript/HTML is invalid (when I try to display the sourcecode of the application/frame, IE informs me that the source contains errors). For Information, I am running Netweaver SP 11.

    Hi again,
    I think I have found where my problem is. I have right clicked on th eimage and try to set some settings in the browser while using the application (on the displayed image).
    Now the image is not displayed anymore (according to the settings) but I dont know where I can delete these setting values. I tried removing my cookies but it did not help.
    Any idea?
    Sincerely,
    Olivier MATT

  • Not able to get the message from Queue using MQ adapter

    HI
    Using Mq adapter am able to put the message in a queue and am able to get the message if i select the schema type as opaque, but am not able to get the message if i specify any schema type and am getting timed out exception.
    Kindly help to proceed with this issue.

    Hi,
    Am also facing the same issue.
    I would be thankful if anyone can provide the solution

  • Flash File not Able to Display using ADF Trinidad components..

    Hi All,
    I am trying to display a flash file using ADF trinidad component for one our project but not able to display when embeded inside the code.
    However I am able to directly access the flash file using http://localhost:7101/test/pages/test.swf
    The below Object code is included inside the tr:panelHorizontalLayout tag. I also tried using tr:media but doesnt display anything on the browser.
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
    <param name="allowScriptAccess" value="sameDomain"/>
    <param name="allowFullScreen" value="false"/>
    <param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
    <param name="quality" value="high"/>
    <param name="bgcolor" value="#ffffff"/>
    <embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
    </object>-->
    Thanks
    Chetan

    Hi Ramandeep,
    I tried that option early but did not work. Not able to understand why.
    Below is the code snippet.
    <tr:panelGroupLayout layout="vertical">
    <tr:panelHorizontalLayout>
    <!--Some Portlets are added-->
    <f:verbatim>
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
    <param name="allowScriptAccess" value="sameDomain"/>
    <param name="allowFullScreen" value="false"/>
    <param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
    <param name="quality" value="high"/>
    <param name="bgcolor" value="#ffffff"/>
    <embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
    </object>
    </f:verbatim>
    </tr:panelHorizontalLayout>
    </tr:panelGroupLayout>
    And as I mentioned it works fine when I directly access the flash file by using http://localhost:7101/test/pages/test.swf.
    Thanks
    Chetan

  • Not able to create a message from satellite system

    Hello Everyone.
    We have been working on Solution Manager .We have managed with successfull installation,Uploaded required support packages,configured the system according to SAP Solution Manager Guide.
    Faced with some problem regarding support desk,we are not able to create a message from satellite system to Solution Manager.
    Note : Error Message related to this problem is ....
    <b>"Error in Local Message System : External number assignment, Enter notification num message was not Created."</b>
    Thanks in advance.
    Regards,
    Nimesh V . Master

    Hi, you need to check the number ranges for the notifications and make sure they are correct.  Look in the IMG of the SAP Solution Manager system for the instructions.  You also need to make sure that the Service Desk BC Sets are activated if you are NOT on 4.0 and SP Stack 09+.  In the later SPs much of this configuration from the IMG is automated in the wizard.

  • Not able to display line item 20 in contract

    I could not able to display line item 20 in the contract document.
    line item 10 and 30is there however there is no line item 30. What could be reason and how to enable the same.
    MRS

    It may also possible if user forgot to enter the line item 20 and jump to line item 30 after 10 as below.
    Then system will show as like this

  • Not able to display a dynamic image

    I'm not able to display a dynamic image on Adobe print form.
    Here is what I did.
    Please let me know what I need to do to get this working...
    1. Created a Graphics node in the Context of the Adobe form.
    2. In the URL tab of the graphics node defined the following two lines:
         <URL pointing to the MIME repository folder>
         IM_FILENAME_1
         Where IM_FILENAME_1 is being passed to the Adobeform function module.
    3. In the Layout mode, dragged and dropped the Graphics node from the
        contenxt tab to the form layout. On doing so it appears as a image field in the form layout.
    4. Activated the form.
    BUT, when I run the form , the image is not showing up.
    The idea is to pass the image file name to the form so that it will show up a dynamic image at run time.
    PLEASE HELP.

    Hi Atul,
    Try this, that should work.
    In the interface , define a parameter type string where you will store the URL of the image .
    In the initialization part of the interface , check if the URL is defined, in case it's empty define a default URL . You should put the compelte URL of the image like "http://www.company.org:8080/logo.logo.jpg" .
    Then link this parameter to the Grpahic Node in the URL parameters .
    Let me know if that works

Maybe you are looking for

  • How to use an equal sign as a part of the value in a property file

    say I have this line in a properties file: args = -Xms512m -Xmx512m -XX:MaxPermSize=256m obviously I can't use the (=) as is. What should I do to make it work? I tried to use \= and \:, but it doesn't work as well. thanks.

  • Creating metadata in Flash CS3 and reading it in AS3

    Is there a way to store metadata in a library symbol in Flash CS3, and then read it in AS3? For example, I want to have the following code run: m_Metadata = 'You're cool!' I need this data before I can play the movie clip. Is there a way to store thi

  • Outlook

    Trying to sync wifes new iphone with Outlook contacts and calendar. Problem is she has outlook 97 (don't laugh). Can't sync, so just want to load info in one time and be done with it. Any way to export into a pst or such and load to keep from re-ente

  • Need advice on setting up RAID.

    I just purchased a Mac Burly 4 Bay Hard Drive Array with 4 ST31500341AS - Seagate Barracuda 7200.11 1500 GB SATAII 32 MB cache Drives.  I will be using this array to store HD 1080i HD video.  I am working on a Mac Pro I just installed  a LYCeSATA PCI

  • How do I expand Windows after already installing Boot Camp

    How do I expand my Windows after already installing Boot Camp?  I'm almost out of space.