Not able to display shopping baskets....not able to access punchout catalogs

Hi,
we are in SRM 7.0  extended classic and using portal as UI.
1.I'm able to create shopping cart but not able to display the same,when clicked on display nothing is displayed.
  other buttons are working fine like Preview
2.When clicked on the Punch out catalog it does not take to the catalog or does not give any error just nothing happens, checked the call structure
   everything seems to be correct.
could you please guide how to rectify this issue.
Thanks & Regards
Venu

Hello,
This is probably related to IE settings.
Read and apply changes recommended in note 1511147 and retest the scenario.
Regards,
Ricardo

Similar Messages

  • Last Approver name in not appearing in the shopping basket

    Hi  SRM Gurus,
    We have Implemented N step Badi for our client .During Post Go Live we are facing this issue
    We have created a shopping basket and there are 3 approvers to approve. After the first approvers is approved the name is not appearing in the Shopping basket.
    We are in SRM 4.0
    Can you tell what could be the reasons
    G.Ganesh Kumar

    Hi Ganesh,
              How you fixed your problem ?  Actually i am facing same problem for Bid invitation.
    Regards
    Abhijeet

  • EDIT button not visible in Display Shopping Cart  screen in SRM portal

    Hello everyone,
    I am facing one strange problem in SRM portal.
    When i create a new shopping cart ON BEHALF of someone then after SAVING the shopping cart the EDIT button disappears from the screen.
    But if i create a shopping cart for  myself only then the EDIT button appears properly.
    My system is  SRM 7.0 .
    Please if anyone has solution to this kindly reply

    Found a note for this issue. The note is 1444219

  • Internal note \ Vendor text in shopping cart not getting correctly saved.

    Hi SRM  folks,
    We are at SRM 4.0 with extended classic.
    We are facing issue with shopping cart ( BBPSC01 ) for  vendor text \ internal note in  " Documents and Attachments Tab" in item detail screen as below :
    Suppose we  enter below three lines in internal note \ Vendor text  as:
    XXX
    AAA
    CCC
    They will appear as below :
    XXX
    AAA
    AAA
    CCC
    CCC
    Line items are getting duplicated.  Please let me know  how this can  be resolved or if any SAP note available ?
    Moderator message - Please do not offer points or rewards
    Thanks in Advance,
    Sachin
    Edited by: Rob Burbank on Jul 30, 2010 9:39 AM

    Here is solution :
    kindly apply the following notes:
    1253076 No Vendor Text Exists Incorrectly Displayed
    1289174 Vendor text/Internal Note is not deleted
    1313904 Extra Line Breaks are added in Approval Notes
    After this please republish all of the Templates with the Report
    w3_publish_services.
    Afterwards the Template Cache has to be invalidated with the
    transaction sitspmon -> Tab "Template and Mime Cache" -> Button
    "Systemwide".
    If you use Proxy Server, you have to empty the cache there as well.
    Furthermore the Temporary Internet Data of the Browse has to be deleted.
    Retest the scenario and see if the behavior still persists.
    Those note  solved the issue

  • Add Approvers is not saving during Shopping basket creation

    Hi SRM Gurus,
    We have Implemented N step Badi for our client .During Post Go Live we are facing this issue
    While creating shopping basket for the first time if we add the approver and save the shopping basket the add approver is not retaining in the shopping basket it get vanished.
    Can you tell what could be the problem. where we can check in the Workflow .(which function module to check (or) any ohter program
    G.Ganesh Kumar

    Hi,
    Which SRM version are you working on??
    Have a  look at these notes:
    Note 1127341 - Added Approver/Reviewer disappear on screen refresh
    Note 1175341 - document creator cannot add adhoc approver in shop-for case
    Note 423112 - Determining the processor assignment in an insertable step
    Note 414928 - 'Add approver' works wrong when second approver not found
    Note 382393 - Add approver/reviewer in Approval Preview
    BR,
    Disha.

  • Web Page is not filling Mac Display - ene when maximized

    web pages are not completing filling the mac book display. Maximize does not fill the display, I am still able to see my screen saver on about 25 percent of the display. I downloaded the battery update last night and this problem appeared.
    Thank You

    Hi jbpdap,
    Do the following> on you right hand down corner there are a view ///// dashed lines. Now place the mouse pointer on it an drag the Safari window to the size (maximum size) you like.
    Reload the open Safari window (any web page is OKAY). Now quite Safari application> Relaunch Safari.
    If this is not working right a way do the above again ...
    Good luck ...
    Dimaxum

  • I am not able to display the text conditionally

    i am not able to display the text conditionally

    Please check the below formula.
    i am not able to print all the below text,the text is printing only one line and some is missing.
    Please do the needful.
    @(If(("@Endrdesc1."=="EWWC006"),"12 It is hereby understood and agreed that any work in connection with the delivery or cartage of goods other than by hand, handcart, cycle or bicycle is expressly excluded from the indemnity granted under this policy 97 It is hereby understood and agreed that any work away from shop or studio is expressly excluded from the indemnity granted under this policy.",""))

  • I am trying to use a interactive form and it says "If this message is not eventually replaced by the proper contents of the document, your PDF  viewer may not be able to display this type of document."  This is a IRS form and has worked before.

    I am trying to use a interactive form and it says "see below"  This is a IRS form and has worked before.
    is there a tech support phone number?
    Please wait...
    If this message is not eventually replaced by the proper contents of the document, your PDF
    viewer may not be able to display this type of document.
    You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by
    visiting http://www.adobe.com/go/reader_download.
    For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
    Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark
    of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries

    That means you are looking at the form online with a browser that uses its own (incompatible) PDF viewer, not the Adobe Reader plugin.
    Either
    download the form to your local disk and fill it from there
    use a browser that employs the Adobe Reader plugin
    configure your browser to use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • 32" SAMSUNG LCD not able to display Macbook through VGA Cable

    New 32" Samsung (LA32A650 series 6) not picking up signal from Black Macbook. It's connected via VGA cable (mini DVI to VGA). Using a 5 meter, 15pin VGA cable which seems to work on a 20" DELL monitor (Macbook to Dell Monitor).
    The Macbook sees the Samsung but the Samsung does not see the Macbook. Tried having both mirroring on and off...no luck. The PC option on the Samsung is still greyed out. Anybody have any other suggestions? I see in other posts where people are able to display their Macbooks to even bigger LCD's using a VGA setup so it must be possible.
    Yes the Macbook is plugged in.
    Yes cables are connected correctly.
    Yes the Mini DVI to VGA adapter works fine.
    I know with some PC laptops you press Function F5 (or other F?). Anything like that for a Macbook?
    What's the ideal display setting for the Macbook? I've dropped the display setting all the way down to 800x600 but still no luck. Maybe I'm doing something wrong or doing it in the wrong order?

    Ok...just an update.
    I brought a pc laptop and my macbook to the store today. The 32" samsung LCD in the store did not pick up the signal on either laptops. HOWEVER. We hooked it up to a 42" sony LCD and no problems with the PC or macbook. So, the Mini-DVI to VGA adapter and VGA cable are fine. A samsung service tech will be coming to the house next week. I will post their findings.
    My suggestion so far would be bring your laptop and cables to any store before making a decision on which LCD you would like to purchase (that is if you care to use the LCD as an external monitor).

  • Not able to display flat file's error line in output

    The below Source Code is BDC for XD01 (update Customer Master Record) in CALL TRANSACTION method. This program is written in call transaction method cause as per user’s requirement, user wants error log to be printed as soon as the BDC process finished in the background mode.
    When you execute this below program it will show a selection screen from where you can select your flat file from system.
    After executing this code show output like below as soon as it finished processing the FLAT file.
    1. Customer Update Summary
    2. Successful record with customer number and name.
    3. Error Records with 'record number' and 'reason for error'
    (For testing you just have to copy-paste-save-active  the source code)
    And I have encountered an issue over here in 3rd section-“Record Number” of “Error Records”.
    The “Record Number” is for display the line number of that flat file line which in which error has occurred.
    The “Record Number”  Entries showing only ‘0’ instead of showing line number of error entry .
    I have used Function Module FORMAT_MESSAGE to capture the errors. But not able to display line number of that flat file which is containing error.
    So please suggest me what changes I should make in below source code to get proper output.
    Flat file for your R&D
    1000     1000     10     10     0001     Company     Chobey & Group1N     Choubey     Amit Choubey     New Alipore Road     Habijabi Apartment     Rastar Dhra      777777     kolkata     777777     kolikata     howrah     777777     IN     WB     1111111111     2222222222     3333333333     4444444444     5555555555     6666666666     0700     EAST     02     01     1060003     A1     Z1     ZZ13     CALS     1     A     10     1
    1000     1000     10     10     0001     Company     Chobey & Group2N     Choubey     Amit Choubey     New Alipore Road     Habijabi Apartment     Rastar Dhra      777777     kolkata     777777     kolikata     howrah     777777     IN     WB     1111111111     2222222222     3333333333     4444444444     5555555555     6666666666     0700     EAST     02     01     1060003     A1     Z1     ZZ13     CALS     1     A     10     1
    1000     1000     10     10     0001     Company     Chobey & Group3N     Choubey     Amit Choubey     New Alipore Road     Habijabi Apartment     Rastar Dhra      777777     kolkata     777777     kolikata     howrah     777777     IN     WB     1111111111     2222222222     3333333333     4444444444     5555555555     6666666666     0700     EAST     02     01     1060003     A1     Z1     ZZ13     CALS     .     A     10     1
    1000     1000     10     10     0001     Company     Chobey & Group4N     Choubey     Amit Choubey     New Alipore Road     Habijabi Apartment     Rastar Dhra      777777     kolkata     777777     kolikata     howrah     777777     IN     WB     1111111111     2222222222     3333333333     4444444444     5555555555     6666666666     0700     EAST     02     01     1060003     A1     Z1     ZZ13     CALS     1     A     ..     1
    1000     1000     10     10     0001     Company     Chobey & Group5N     Choubey     Amit Choubey     New Alipore Road     Habijabi Apartment     Rastar Dhra      777777     kolkata     777777     kolikata     howrah     777777     IN     WB     1111111111     2222222222     3333333333     4444444444     5555555555     6666666666     0700     EAST     02     01     1060003     A1     Z1     ZZ13     CALS     1     A     10     1
    And Source Code
    *& Report  Z_TEST_SAI                                                  *
    REPORT  Z_TEST_SAI no standard page heading line-size 255.
    TYPES: BEGIN OF t_cust,
            bukrs like rf02d-bukrs,
            vkorg like rf02d-vkorg,
            vtweg like rf02d-vtweg,
            spart like rf02d-spart,
            ktokd like rf02d-ktokd,
            anred like kna1-anred,
            name1 like kna1-name1,
            sortl like kna1-sortl,
            name2 like kna1-name2,
            name3 like kna1-name3,
            name4 like kna1-name4,
            stras like kna1-stras,
            pfach like kna1-pfach,
            ort01 like kna1-ort01,
            pstlz like kna1-pstlz,
            ort02 like kna1-ort02,
            pfort like kna1-pfort,
            pstl2 like kna1-pstl2,
            land1 like kna1-land1,
            regio like kna1-regio,
            telx1 like kna1-telx1,
            telf1 like kna1-telf1,
            telfx like kna1-telfx,
            telf2 like kna1-telf2,
            teltx like kna1-teltx,
            stceg like kna1-stceg,
            cityc like kna1-cityc,
            lzone like kna1-lzone,
            niels like kna1-niels,
            kukla like kna1-kukla,
            akont like knb1-akont,
            fdgrv like knb1-fdgrv,
            vzskz like knb1-vzskz,
            zterm like knb1-zterm,
            vkbur like knvv-vkbur,
            versg like knvv-versg,
            vsbed like knvv-vsbed,
            ktgrd like knvv-ktgrd,
            taxkd like knvi-taxkd,
    END OF t_cust.
    TYPES: BEGIN OF t_sucrec,
              cnum TYPE kna1-kunnr,                          "Customer Number
              cnam TYPE kna1-name1,                          "Customer Name
    END OF t_sucrec.
    TYPES: BEGIN OF t_errrec,
    *        lineno TYPE i,                                  "Line Number
             lineno TYPE string,
           message TYPE string,                              "Error Message
    END OF t_errrec.
    DATA: v_file TYPE string,                                "Variable for storing flat file
    it_cust TYPE STANDARD TABLE OF t_cust,                   "Internal table of Customer
    wa_cust LIKE LINE OF it_cust,                            "Workarea of Internal table it_cust
    it_sucrec TYPE STANDARD TABLE OF t_sucrec,               "Internal table of Success records
    wa_sucrec LIKE LINE OF it_sucrec,                        "Workarea of Internal table it_sucrec
    it_errrec TYPE STANDARD TABLE OF t_errrec,
    wa_errrec LIKE LINE OF it_errrec,
    it_bdctab LIKE bdcdata OCCURS 0 WITH HEADER LINE,        "Internal table structure of BDCDATA
    it_messagetab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE, "Tracing Error Messages
    v_date LIKE sy-datum,                                    "Controlling of session date
    v_index LIKE sy-index,                                   "Index Number
    v_totrec TYPE i,                                         "Total Records
    v_errrec TYPE i,                                         "Error Records
    v_sucrec TYPE i,                                         "Success Records
    v_sesschk TYPE c.                                        "Session maintenance
    *& SELECTION-SCREEN
    SELECTION-SCREEN: BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001 NO INTERVALS.
    PARAMETERS: p_file    TYPE rlgrap-filename.              "rlgrap-filename is a predefined structure
    SELECTION-SCREEN: END OF BLOCK blk1.
    SELECTION-SCREEN: BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002 NO INTERVALS.
    PARAMETERS: p_mode    LIKE ctu_params-dismode DEFAULT 'N',
                p_update  LIKE ctu_params-updmode DEFAULT 'A'.
    SELECTION-SCREEN END OF BLOCK blk2.
    *& INITIALIZATION
    INITIALIZATION.
    v_date = sy-datum - 1.
    *& AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
    program_name = syst-cprog
    dynpro_number = syst-dynnr
    FIELD_NAME = ' '
    IMPORTING
    file_name = p_file.
    *& START-OF-SELECTION
    START-OF-SELECTION.
    v_file = p_file.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = v_file
    filetype = 'ASC'
    has_field_separator = 'X'
    TABLES
    data_tab = it_cust
    EXCEPTIONS
    file_open_error = 1
    file_read_error = 2
    no_batch = 3
    gui_refuse_filetransfer = 4
    invalid_type = 5
    no_authority = 6
    unknown_error = 7
    bad_data_format = 8
    header_not_allowed = 9
    separator_not_allowed = 10
    header_too_long = 11
    unknown_dp_error = 12
    access_denied = 13
    dp_out_of_memory = 14
    disk_full = 15
    dp_timeout = 16
    OTHERS = 17.
    IF sy-subrc = 0.
    *MESSAGE ID sy-msgid
    *TYPE sy-msgty
    *NUMBER sy-msgno
    *WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    *& END-OF-SELECTION
    END-OF-SELECTION.
    v_index = sy-index.
    LOOP AT it_cust INTO wa_cust.
      perform bdc_dynpro      using 'SAPMF02D' '0100'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'RF02D-KTOKD'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '/00'.
        perform bdc_field       using 'RF02D-BUKRS'
                                      wa_cust-bukrs.
        perform bdc_field       using 'RF02D-VKORG'
                                      wa_cust-vkorg.
        perform bdc_field       using 'RF02D-VTWEG'
                                      wa_cust-vtweg.
        perform bdc_field       using 'RF02D-SPART'
                                      wa_cust-spart.
        perform bdc_field       using 'RF02D-KTOKD'
                                      wa_cust-ktokd.
        perform bdc_dynpro      using 'SAPMF02D' '0110'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNA1-TELTX'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNA1-ANRED'
                                      wa_cust-anred.
        perform bdc_field       using 'KNA1-NAME1'
                                      wa_cust-name1.
        perform bdc_field       using 'KNA1-SORTL'
                                      wa_cust-sortl.
        perform bdc_field       using 'KNA1-NAME2'
                                      wa_cust-name2.
        perform bdc_field       using 'KNA1-NAME3'
                                      wa_cust-name3.
        perform bdc_field       using 'KNA1-NAME4'
                                      wa_cust-name4.
        perform bdc_field       using 'KNA1-STRAS'
                                      wa_cust-stras.
        perform bdc_field       using 'KNA1-PFACH'
                                      wa_cust-pfach.
        perform bdc_field       using 'KNA1-ORT01'
                                      wa_cust-ort01.
        perform bdc_field       using 'KNA1-PSTLZ'
                                      wa_cust-pstlz.
        perform bdc_field       using 'KNA1-ORT02'
                                      wa_cust-ort02.
        perform bdc_field       using 'KNA1-PFORT'
                                      wa_cust-pfort.
        perform bdc_field       using 'KNA1-PSTL2'
                                      wa_cust-pstl2.
        perform bdc_field       using 'KNA1-LAND1'
                                      wa_cust-land1.
        perform bdc_field       using 'KNA1-REGIO'
                                      wa_cust-regio.
        perform bdc_field       using 'KNA1-SPRAS'
                                      'EN'.
        perform bdc_field       using 'KNA1-TELX1'
                                      wa_cust-telx1.
        perform bdc_field       using 'KNA1-TELF1'
                                      wa_cust-telf1.
        perform bdc_field       using 'KNA1-TELFX'
                                      wa_cust-telfx.
        perform bdc_field       using 'KNA1-TELF2'
                                      wa_cust-telf2.
        perform bdc_field       using 'KNA1-TELTX'
                                      wa_cust-teltx.
        perform bdc_dynpro      using 'SAPMF02D' '0120'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNA1-CITYC'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNA1-STCEG'
                                      wa_cust-stceg.
        perform bdc_field       using 'KNA1-CITYC'
                                      wa_cust-cityc.
        perform bdc_field       using 'KNA1-LZONE'
                                      wa_cust-lzone.
        perform bdc_dynpro      using 'SAPMF02D' '0125'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNA1-KUKLA'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNA1-NIELS'
                                      wa_cust-niels.
        perform bdc_field       using 'KNA1-KUKLA'
                                      wa_cust-kukla.
        perform bdc_dynpro      using 'SAPMF02D' '0130'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNBK-BANKS(01)'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_dynpro      using 'SAPMF02D' '0340'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'RF02D-KUNNR'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_dynpro      using 'SAPMF02D' '0360'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVK-NAMEV(01)'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_dynpro      using 'SAPMF02D' '0210'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNB1-VZSKZ'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNB1-AKONT'
                                      wa_cust-akont.
        perform bdc_field       using 'KNB1-FDGRV'
                                      wa_cust-fdgrv.
        perform bdc_field       using 'KNB1-VZSKZ'
                                      wa_cust-vzskz.
        perform bdc_dynpro      using 'SAPMF02D' '0215'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNB1-ZTERM'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNB1-ZTERM'
                                      wa_cust-zterm.
        perform bdc_dynpro      using 'SAPMF02D' '0220'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNB5-MAHNA'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_dynpro      using 'SAPMF02D' '0230'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNB1-VRSNR'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_dynpro      using 'SAPMF02D' '0610'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'RF02D-KUNNR'.
        perform bdc_dynpro      using 'SAPMF02D' '0310'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVV-VERSG'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNVV-AWAHR'
                                      '100'.
        perform bdc_field       using 'KNVV-VKBUR'
                                      wa_cust-vkbur.
        perform bdc_field       using 'KNVV-WAERS'
                                      'INR'.
        perform bdc_field       using 'KNVV-KALKS'
                                      '1'.
        perform bdc_field       using 'KNVV-VERSG'
                                      wa_cust-versg.
        perform bdc_dynpro      using 'SAPMF02D' '0315'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVV-VSBED'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNVV-LPRIO'
        perform bdc_field       using 'KNVV-KZAZU'
                                      'X'.
        perform bdc_field       using 'KNVV-VSBED'
                                      wa_cust-vsbed.
        perform bdc_field       using 'KNVV-ANTLF'
                                      '9'.
        perform bdc_dynpro      using 'SAPMF02D' '0320'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVV-KTGRD'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNVV-BOKRE'
                                      'X'.
        perform bdc_field       using 'KNVV-KTGRD'
                                      wa_cust-ktgrd.
        perform bdc_dynpro      using 'SAPMF02D' '1350'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVI-TAXKD(01)'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=VW'.
        perform bdc_field       using 'KNVI-TAXKD(01)'
                                      wa_cust-taxkd.
        perform bdc_dynpro      using 'SAPMF02D' '0324'.
        perform bdc_field       using 'BDC_CURSOR'
                                      'KNVP-PARVW(01)'.
        perform bdc_field       using 'BDC_OKCODE'
                                      '=UPDA'.
    CALL TRANSACTION 'XD01' USING it_bdctab
    MODE p_mode
    UPDATE p_update
    MESSAGES INTO it_messagetab.
    IF sy-subrc = 0.
    *& reading success records to corresponding internal table
    READ TABLE it_messagetab WITH KEY msgtyp = 'S'.
    IF sy-subrc = 0.
    wa_sucrec-cnum = it_messagetab-msgv1.
    wa_sucrec-cnam = wa_cust-name1.
    APPEND wa_sucrec TO it_sucrec.
    CLEAR wa_sucrec.
    ENDIF.
    ELSE.
    *& reading error records to corresponding internal table
    READ TABLE it_messagetab WITH KEY msgtyp = 'E'.
    IF sy-subrc = 0.
    CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
    id = sy-msgid
    no = it_messagetab-msgnr
    v1 = it_messagetab-msgv1
    v2 = it_messagetab-msgv2
    v3 = it_messagetab-msgv3
    v4 = it_messagetab-msgv4
    IMPORTING
    msg = wa_errrec-message.
    wa_errrec-lineno = v_index.
    *******wa_errrec-lineno  = v_index.
    *******wa_errrec-message = it_messagetab-msgv1.
    APPEND wa_errrec TO it_errrec.
    CLEAR wa_errrec.
    ENDIF.
    ENDIF.
    CLEAR : it_bdctab, it_messagetab.
    REFRESH: it_bdctab, it_messagetab.
    ENDLOOP.
    DESCRIBE TABLE it_cust LINES v_totrec.
    DESCRIBE TABLE it_errrec LINES v_errrec.
    DESCRIBE TABLE it_sucrec LINES v_sucrec.
    PERFORM disp_data.
    SKIP 2.
    IF v_sucrec > 0.
    PERFORM disp_success_data.
    ENDIF.
    SKIP 2.
    IF v_errrec > 0.
    PERFORM disp_error_data.
    ENDIF.
    *& Form bdc_dynpro
    *#  text
    *#  -->P_0104 text
    *#  -->P_0105 text
    FORM bdc_dynpro USING program
    dynpro.
    CLEAR it_bdctab.
    it_bdctab-program = program.
    it_bdctab-dynpro = dynpro.
    it_bdctab-dynbegin = 'X'.
    APPEND it_bdctab.
    ENDFORM. " bdc_dynpro
    *& Form bdc_field
    *#  text
    *#  -->P_0109 text
    *#  -->P_IT_cust_LIFNR text
    FORM bdc_field USING fnam
    fval.
    CLEAR it_bdctab.
    it_bdctab-fnam = fnam.
    it_bdctab-fval = fval.
    APPEND it_bdctab.
    ENDFORM. " bdc_field
    *& Form disp_data
    *#  text
    *#  --> p1 text
    *#  <-- p2 text
    FORM disp_data .
    ULINE (45).
    WRITE : / sy-vline,
    12 'FAMD CUSTOMER UPDATE SUMMARY'(004) COLOR 1,
    45 sy-vline.
    ULINE /(45).
    WRITE : / sy-vline,
    'Total Records Processed'(007),
    28 '=',
    30 v_totrec,
    45 sy-vline,
    / sy-vline,
    'Error Records'(005),
    28 '=',
    30 v_errrec,
    45 sy-vline,
    / sy-vline,
    'Successful Records'(006),
    28 '=',
    30 v_sucrec,
    45 sy-vline.
    ULINE /(45).
    ENDFORM. " disp_data
    *& Form disp_success_data
    *#  text
    *#  --> p1 text
    *#  <-- p2 text
    FORM disp_success_data .
    ULINE (45).
    WRITE : / sy-vline,
    14 'Successful Records'(012) COLOR 1,
    45 sy-vline.
    ULINE /(45).
    WRITE : / sy-vline ,
    'Customer Number'(010) COLOR 2,
    17 sy-vline,
    25 'Customer Name'(011) COLOR 2,
    45 sy-vline.
    ULINE /(45).
    LOOP AT it_sucrec INTO wa_sucrec.
    WRITE: / sy-vline ,
    wa_sucrec-cnum,
    17 sy-vline,
    19 wa_sucrec-cnam,
    45 sy-vline.
    ENDLOOP.
    ULINE /(45).
    ENDFORM. " disp_success_data
    *& Form disp_error_data
    *#  text
    *#  --> p1 text
    *#  <-- p2 text
    FORM disp_error_data .
    ULINE (85).
    WRITE : / sy-vline,
    35 'Error Records'(013) COLOR 1,
    85 sy-vline.
    ULINE /(85).
    WRITE : / sy-vline,
    'Record Number'(008) COLOR 2,
    sy-vline,
    37 'Reason for error'(009) COLOR 2,
    85 sy-vline.
    ULINE /(85).
    LOOP AT it_errrec INTO wa_errrec.
    WRITE : / sy-vline,
    wa_errrec-lineno,
    17 sy-vline,
    wa_errrec-message,
    85 sy-vline.
    ENDLOOP.
    ULINE /(85).
    ENDFORM. " disp_error_data

    Worked out n found the solution

  • When creating a "lookup" column be able to display not only one column from the other list, but additional columns

    With the lookup technique, it is possible to select an item from another list and display one column of this item
    It is obviously possible to create several lookup columns on the same list and therefore display several columns
    There’s a high risk of not selecting the same item and therefore have inconsistent columns
    The Requirement therefore consist of being able of displaying several columns of the same item from the other list, based on one unique selection
    Example:
    In list(x), define lookup column on list (y), column Title (possible today)
    Then define a “secondary” lookup column on same list, column Code
    The effect would be that when selecting an item from list (X), both Title and Code would show up consistently in 2 different columns of list (Y)
    All possible solutions are welcomed

    If you are using SharePoint 2010, you can retrieve additional columns when adding a Lookup. If you are using 2007, there is no direct OOTB way, but the following two posts provide potential work-arounds:
    https://www.definitivelogic.com/blog/microsoft-sharepoint-2007-pulling-column-data-one-list-another-based-common-list-field
    http://stefan-stanev-sharepoint-blog.blogspot.com/2010/11/sharepoint-2007-associated-lookup.html
    Dimitri Ayrapetov (MCSE: SharePoint)

  • Flash File not Able to Display using ADF Trinidad components..

    Hi All,
    I am trying to display a flash file using ADF trinidad component for one our project but not able to display when embeded inside the code.
    However I am able to directly access the flash file using http://localhost:7101/test/pages/test.swf
    The below Object code is included inside the tr:panelHorizontalLayout tag. I also tried using tr:media but doesnt display anything on the browser.
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
    <param name="allowScriptAccess" value="sameDomain"/>
    <param name="allowFullScreen" value="false"/>
    <param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
    <param name="quality" value="high"/>
    <param name="bgcolor" value="#ffffff"/>
    <embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
    </object>-->
    Thanks
    Chetan

    Hi Ramandeep,
    I tried that option early but did not work. Not able to understand why.
    Below is the code snippet.
    <tr:panelGroupLayout layout="vertical">
    <tr:panelHorizontalLayout>
    <!--Some Portlets are added-->
    <f:verbatim>
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
    <param name="allowScriptAccess" value="sameDomain"/>
    <param name="allowFullScreen" value="false"/>
    <param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
    <param name="quality" value="high"/>
    <param name="bgcolor" value="#ffffff"/>
    <embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
    </object>
    </f:verbatim>
    </tr:panelHorizontalLayout>
    </tr:panelGroupLayout>
    And as I mentioned it works fine when I directly access the flash file by using http://localhost:7101/test/pages/test.swf.
    Thanks
    Chetan

  • Not able to display error message in PR creation.

    HI Experts,
    In PR creation process i am not able to display error message.
    BADI: ME_PROCESS_REQ_CUST
    method : PROCESS_ACCOUNT, PROCESS_ITEM
    I have used Include mm_messages_mac for handling error .
    MESSAGE e112(XXX) WITH XX-XX. this is my error message.
    even tried this also  mmpur_message 'W' 'ZMM_PUR' '001' '' '' '' ''.
    Please provide solution for this.
    Regards,
    Jayant

    Hi,
    In devepoment system im able to display the message but not in quality,code is 100% algined with quality.
    In quality system error message is being executed but not displayed,i mean control is comming out after the error message.
    i am using
    message EXXX(XXX).
    regards,
    Jayant.

  • Not able to display javascript alert message from within a pl/sql block

    Hello,
    Can anyone please help me out with this issue. I wanted to display an javascript alert message from within a pl/sql block for an update button. Below is sample code which i am using. P1_ITEM is my hidden item on the report.
    begin
    if :P1_ITEM IS NOT NULL then
    HTP.p ('<script type="text/javascript">');
    HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
    HTP.p ('</script>');
    end if;
    end;
    and I have made this code to be executed conditionally when request = Expression1
    Expression1: SUBMIT
    The thing is I am not able to display an alert message when the update button is clicked.
    Can anyone please help me with this one.
    Thanks,
    Orton

    varad but I also have an update statement within that block for the update button something like this i want to achieve.
    begin
    if :P1_ITEM IS NULL THEN
    update sample_tbl
    set col1 =:APP_USER,
    col2 = 'Y'
    where pk_col = ---;
    commit;
    HTP.p ('<script type="text/javascript">');
    HTP.p ('alert(''Successfully assigned an item!'');');
    HTP.p ('</script>');
    end if;
    if :P1_ITEM IS NOT NULL then
    HTP.p ('<script type="text/javascript">');
    HTP.p ('alert(''Please complete the item which is already assigned to you!'');');
    HTP.p ('</script>');
    end if;
    end;
    thanks,
    Orton

  • Not able to display line item 20 in contract

    I could not able to display line item 20 in the contract document.
    line item 10 and 30is there however there is no line item 30. What could be reason and how to enable the same.
    MRS

    It may also possible if user forgot to enter the line item 20 and jump to line item 30 after 10 as below.
    Then system will show as like this

Maybe you are looking for