NOT ABLE TO DISPLAY THE NEW ADDED FIELD

Hi Experts,
   I was working on Solution Manager. Iam Creating table maintianance generator for particular table. Its working fine when i done the job for the first time. As i forgotten to add one more field in that table i had done it later. now that added field is not displaying in the table maintainance generator (tcode: sm30). what is the procedure that i have to follow in order to display that added field.
Regards,
Maha.

Hi Mahalalakshmi,
  your new table defnition is not compatable with the internal program already generated  for your table.
for this do the following
SE11-->Utilities->Database Utilities----->Click on Activate and Adjust Database.
Then the Table defnition is validated. The Internal Program for your table adjusted
and stored in the R/3 Repository (that is in the DATABASE Level).
If this valueble for you, validate with some points
Regards,
Ramu

Similar Messages

  • Not able to display the Installation Base of once it unassigned from upper level Installation IBase.

    Hi All
    I am working on IBase scenario for my client, I am new to the IBase scenario. Here we are creating installation base for two to five levels of product.
    Once we create IBase for lower level then this IBase is inserted in upper level IBase. Like this we assign all levels based on product.In some cases we need to unassign any of IBase from its upper level IBase. When it is unassigned we are not able to display the IBase which unassigned. When it is unassigned from upper level how come system not able to display this IBase. If we speak functionally the part (IBase) which is unassigned should be valid to assign in any other upper level IBase in feature.
    The error I am getting for above is
    Serial number XXXXXXX for material XXXXXXX does not exist in any IBase
    Message no. IQ122
    Diagnosis
    Serial number BMF3000106 for material S24-D5022-C100-6 does not exist in any installed base on 31.03.2015 at 10:22:09.
    System Response
    The system cancels processing.
    Hi experts please suggest.
    Regards
    Kesava

    Hello Kesava
    Can you please explain in detail what exactly you are trying to do while assigning and unassigning Ibase.
    Regards
    Naresh

  • I exported a pages document to word, but was not able to edit the new word document.

    i exported a pages document to word, but was not able to edit the new word document.

    I have a OSX IMAC Version 10.8.5.  I got pages at the same time I purchased this computer.  I use a document to write all my passwords. Seems like when I E-mail myself the document from pages, I have not been able to type in the document, it acts like it is locked. I checked all the "lock" and "unlock" fields, and none of them were locked.  I notice the document says PDF.  How do I correct this?  Seems like I've tried everything.  If you can help, that would be great!

  • Garageband was not able to install the new sounds

    I'm on an iMac 21.5-inch (mid 2011) running Yosemite; 2.5 GHz Intel Core i5; 4GB memory.
    A few months ago, I uninstalled GarageBand. Now I'm trying to reinstall it. I can get GarageBand 6 reinstalled, but I would like to get working with the latest version. I'm able to download the latest version from the App Store with no issue. It installs with no issue.
    When I open it, it thanks for me downloading it, and then begins to download "an essential collection of sounds and loops." After a bit of downloading, it asks for my admin password; I enter it, and a few seconds later, it gives the error: "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again." Closing and reopening GarageBand just takes me through the same loop (no pun intended). When the window is open, if I click on the GarageBand menu in the Apple bar, nothing happens.
    It does not ask me to accept anything; I am signed into the App Store with the same Apple ID I have always used (it is the only one I have ever had, so that's not the issue). I am an admin on my Mac, so it's not a permissions issue. It's not a password issue either.
    Things I have tried:
    Rebooting into Safe Boot and opening from there; same issue.
    Repaired permissions (it fixed oodles of things completely unrelated to GarageBand); same issue.
    Creating a new admin profile and opening from there; it gives a different error, but the effect is the same.
    Removed the program, trashed anything remotely related to GarageBand (preferences, folders, etc), emptied the trash, restarted the computer, reinstalled; same issue.
    Installed GarageBand on top of itself, just in case; same issue.
    I can't think of what else to try. Help!
    For reference, here is a screenshot of what I'm getting stuck on:

    The solution Lijoesat posted above worked for me!
    First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
    I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
    I tried to empty the trash bin after but many files was locked and Garageband would still not install.
    I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
    The inserted picture show some of the folder structure, I deleted everything after private/var/folders/

  • Cannot get all the sounds in library to download. I get this message GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again.

    When I attempt to download all the sounds in my Garage Band library, I get this message.
    "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again". When I do this, I get the same message again.
    CAn anyone advise how to get all the sounds in my Garageband library?

    the same here for the drummers sounds in garageband 10xxx

  • OAF page is not able to display the custom error messages

    Hi,
    I have extended a seeded CO and trying to throw few custom error messages.
    It was working fine, but suddenly it is not able to display the error messages(but checked that the error messages are still present in application) and saying "Message not found. Application: PER, Message Name: ...."
    Is there any profile option which enables the custom messages?
    Thanks,
    Ranita

    Hi,
    There is no profile to enable the Custom error Messages, u will use the diagnostistics for showing the messages in the custom page
    use the following syntax for writing a msg in Jdeveloper
    pageContext.writeDiagnostics(strClassName, "Initializing the vo....", OAWebBeanConstants.STATEMENT);
    and enable the following profile option to yes
    Fnd:Diagnostics
    Regards
    Chanu

  • I am not able to display the text conditionally

    i am not able to display the text conditionally

    Please check the below formula.
    i am not able to print all the below text,the text is printing only one line and some is missing.
    Please do the needful.
    @(If(("@Endrdesc1."=="EWWC006"),"12 It is hereby understood and agreed that any work in connection with the delivery or cartage of goods other than by hand, handcart, cycle or bicycle is expressly excluded from the indemnity granted under this policy 97 It is hereby understood and agreed that any work away from shop or studio is expressly excluded from the indemnity granted under this policy.",""))

  • Not able to display the image on the popup.

    hi,
    my requirement is: i have command link on the form.which on clicked should display a popup and with in that popup a image should be shown. I have stored that image in the form of byte array.
    On clicking the link i am able to show the popup.But,not able to display the image on the popup.
    thanks in advance.
    Srikanth.V

    Hi,
    how do you access the image? Put yourself in our shoes and look at your question and then add the missing information. E.g. does the image show if loaded on a page itself and not a popup ?
    Frank

  • HT202873 I just purchased GB10 last week and I repeatedly keep getting the following message, "Garageband was not able to install the new sounds. Close and re-open Garageband to download and install them again."  I have tried EVERY suggestion!

      Model Name: MacBook Pro
      OS X Yosemite: 10.10.2
      Model Identifier: MacBookPro8,2
      Processor Name: Intel Core i7
      Processor Speed: 2.3 GHz
      Number of Processors: 1
      Total Number of Cores: 4
      L2 Cache (per Core): 256 KB
      L3 Cache: 8 MB
      Memory: 4 GB
    I just purchased GarageBand 10.0.3 last week and I repeatedly keep getting the following message when I try to download ANY of the FREE Piano lessons in the "Lesson Store", "Garageband was not able to install the new sounds. Close and re-open Garageband to download and install them again."  I have tried EVERY suggestion that I have come across on the internet and nothing is working!  If I'd known I would encounter this issue, I would not have paid for this.  Tried restarting, rebooting, reinstalling, deleting the cache, and on the verge of just reinstalling the OS.  I have come across people have the same issue for months and I can't believe Apple has not offered a fix or update or anything. 

    Immargarita,  Since you just purchased the software you qualify for a no charge one on one at an Apple store.  They never could tell me what was wrong, but after three visits and not one dime, all lessons downloaded at the store.  I was not going home until it worked.
    Hint, hint, I had just upgraded OX when the problem started.   So... I qualified for tech support.  I forgot to get my none working since the up grade Photoshop fixed.  Some Java component can't be found and just like GB, the link to Apple for support does not work.  I have the good old PS disc.  I'm not happy with this cloud stuff.
    When you call and give the SN for your computer, they may say it will cost $29.00 dollars for one time support.  Instead choose a different prompt, tell the human being what your problem is and set up a visit to the Apple store.   BTW, no one at the store seemed to have heard of this issue.
    The techie just started the download and ran the activity monitor.  The download stopped once.  Then he continued it and everything is there now.
    Shame on you Apple.
    Hope this helps.

  • I am not able to see the new drive

    I have a Sun Blade 2500 with SUN 5.9 OS installed.I have on hard disk drive in it and now i attached another drive in this system but i am not able to see the new drive when i run the below command
    bash-2.05# echo | format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
    0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
    /pci@1d,700000/scsi@4/sd@0,0
    Specify disk (enter its number): Specify disk (enter its number):
    ==============================================
    Although i can see two drives in the output of below command:
    bash-2.05# iostat -E |grep Size
    Size: 73.40GB <73400057856 bytes>
    Size: 73.40GB <73400057856 bytes>
    Size: 0.00GB <0 bytes>
    Edited by: 842294 on Apr 6, 2011 4:40 AM

    Resolved
    bash-2.05# cfgadm -c configure c0
    bash-2.05# echo | format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
    0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
    /pci@1d,700000/scsi@4/sd@0,0
    1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
    /pci@1d,700000/scsi@4/sd@1,0
    Specify disk (enter its number): Specify disk (enter its number):

  • Not able to display the Portal Contents

    Hi
    I created new user and assigned only one role called "Content Administrator"
    When i loggned using that user then i am not able to see the contents under the browse tab.
    Please let me know what to do if i want get the contents under the browser tab;
    Thanks
    mmukesh

    Is your laptop's Internet explorer version is IE 7.0? If thats the case then it might be the issue. Portal doesnt work well with IE 7.0 and you get some problems like these a lot of times. You can correct this to include IE 7.0 also but that you have to configure via the Visual Admin. For now to confirm this - just try checking IE version - and if its 7.0 try installing IE 6.0 to see whether you are still getting the error.
    You can see note number 991449 to find out how you can include IE 7.0 also to your portal setting to eradicate this error. Well - if at all thats the cause. Please verify that before doing anything.
    Regards,
    Shubhadip
    Message was edited by:
            Shubhadip Ghosh

  • HT4623 HI, i am using I POD 3rd generatin with OS 3.1.3.  I am not able to update the new IOS and i could not found the update button in my POD.  Pleaese help me how do that.  regards

    Dear Friends,
    I am using IPOD touch 3rd generation with OS 3.1.3 (7E18) (Model MA623LL), i am not able to upgrade the IOS.  My IPOD does not have the software update button.
    Please help me how to upgrade the IOS for this version i could not able to download the games and new features.
    Please guide me.
    regards
    Nagaraju T
    [email protected]

    You iPod, model MA623LL , is a 1G iPod and those can only go to iOS 3.1.3
    Identifying iPod models

  • Not able to find the New ods created in Query Designer.

    Hi,
    I am trying to create a new query on an ODS(new) in Query Designer but not able to find the ODS . The ODS is present in the system however when we check . Please advice whats going wrong.

    Hello Prakash,
    I know the solution
    Go to RRMX -> Queries -> Select New Query -> and then click on InfoArea -> Select ur new ODS -> and Click OK
    U will be able to see characteristics and keyfigures..
    Drag and drop and click on execute....
    Reward if its helpful.....
    Thanks,
    Sonu

  • Not able to display the 18 cloumns inthe alv output

    Hi Everybody,
    I am developing one report to the display the output in alv for the 18months report.
    basically my requirement is when ever i execute the program based on the current month it should calculate the next 18months and fetch the data and display in the alv.
    for eg: if we are executing in the month of mar 2012 then in the output it should display from march 2012 to next year aug 2013 and in the column heading also it should display from March to next year August.
    i have written the code and able to fetch tshould change he data for the 18 months and when i am sending the data into the internal table from row wise to column wise for the months the data is getting overwritten from the next year march 2013 to august 2013 and i am unable to add the new column after 12 months completed and the field catlog heading also should change based on when we are executing.
    please find the below code which i have written and please let me know how and where i can correct the code so that the 18 columns are displayed from the month of the execution and the data according to it.
    final internal table:
    TYPES : BEGIN OF ty_output,
             matnr  TYPE   matnr,       "Material
             maktx  TYPE   maktx,       "Material Description
             mjahr  TYPE   mjahr,       "Material Document Year
             jan    TYPE   menge_d,     "January Sales Qty
             mjan   TYPE   meins,       "January Unit of Measure
             feb    TYPE   menge_d,     "Febuary Sales Qty
             mfeb   TYPE   meins,       "Febuary Unit of Measure
             mar    TYPE   menge_d,     "March Sales Qty
             mmar   TYPE   meins,       "March Unit of Measure
             apr    TYPE   menge_d,     "April Sales Qty
             mapr   TYPE   meins,       "April Unit of Measure
             may    TYPE   menge_d,     "May Sales Qty
             mmay   TYPE   meins,       "May Unit of Measure
             jun    TYPE   menge_d,     "June Sales Qty
             mjun   TYPE   meins,       "June Unit of Measure
             jul    TYPE   menge_d,     "July Sales Qty
             mjul   TYPE   meins,       "July Unit of Measure
             aug    TYPE   menge_d,     "August Sales Qty
             maug   TYPE   meins,       "August Unit of Measure
             sep    TYPE   menge_d,     "September Sales Qty
             msep   TYPE   meins,       "September Unit of Measure
             oct    TYPE   menge_d,     "October Sales Qty
             moct   TYPE   meins,       "October Unit of Measure
             nov    TYPE   menge_d,     "November Sales Qty
             mnov   TYPE   meins,       "November Unit of Measure
             dec    TYPE   menge_d,     "December Sales Qty
             mdec   TYPE   meins,       "December Unit of Measure
             month  TYPE   char2,       "MONTH
             menge  TYPE   menge_d,     "Quantity
             meins  TYPE   meins,
            END OF ty_output.
    code to pass the data in the internal table:
    *Getting the Data into GT_OUTPUT Table
      LOOP AT gt_output1 INTO wa_output1.
        READ TABLE gt_output WITH KEY matnr = wa_output1-matnr ASSIGNING <out>.
        IF sy-subrc NE 0.
          APPEND INITIAL LINE TO gt_output ASSIGNING <out>.
          <out>-matnr = wa_output1-matnr.
          <out>-mjahr = wa_output1-mjahr.
        ENDIF.
        READ TABLE GT_MAKT INTO WA_MAKT WITH KEY MATNR = WA_OUTPUT1-MATNR.
        <out>-maktx = wa_makt-maktx.
        READ TABLE gt_final INTO wa_mseg WITH KEY matnr = wa_output1-matnr.
        CASE wa_output1-month.
    *    case wa_output1-mjahr.
          WHEN '01'.
            <out>-jan = wa_output1-menge.
            <out>-mjan = wa_mseg-meins.
          WHEN '02'.
            <out>-feb = wa_output1-menge.
            <out>-mfeb = wa_mseg-meins.
          WHEN '03'.
            <out>-mar = wa_output1-menge.
            <out>-mmar = wa_mseg-meins.
          WHEN '04'.
            <out>-apr = wa_output1-menge.
            <out>-mapr = wa_mseg-meins.
          WHEN '05'.
            <out>-may = wa_output1-menge.
            <out>-mmay = wa_mseg-meins.
          WHEN '06'.
            <out>-jun = wa_output1-menge.
            <out>-mjun = wa_mseg-meins.
          WHEN '07'.
            <out>-jul = wa_output1-menge.
            <out>-mjul = wa_mseg-meins.
          WHEN '08'.
            <out>-aug = wa_output1-menge.
            <out>-maug = wa_mseg-meins.
          WHEN '09'.
            <out>-sep = wa_output1-menge.
            <out>-msep = wa_mseg-meins.
          WHEN '10'.
            <out>-oct = wa_output1-menge.
            <out>-moct = wa_mseg-meins.
          WHEN '11'.
            <out>-nov = wa_output1-menge.
            <out>-mnov = wa_mseg-meins.
          WHEN '12'.
            <out>-dec = wa_output1-menge.
            <out>-mdec = wa_mseg-meins.
        ENDCASE.
    *    ENDCASE.
      ENDLOOP.
    Fieldcatalog
    FORM fieldcatlog .
      REFRESH gi_fcat.
      CLEAR gr_fcat.
      gr_fcat-fieldname     = 'MATNR'.
      gr_fcat-tabname       = 'GT_OUTPUT'.
      gr_fcat-ref_fieldname = 'MATNR'.
      gr_fcat-ref_tabname   = 'MSEG'.
      gr_fcat-outputlen     = 18.
      APPEND gr_fcat TO gi_fcat.
      CLEAR gr_fcat.
      gr_fcat-fieldname     = 'MAKTX'.
      gr_fcat-tabname       = 'GT_OUTPUT'.
      gr_fcat-ref_fieldname = 'MAKTX'.
      gr_fcat-ref_tabname   = 'MAKT'.
      gr_fcat-outputlen     = 40.
      APPEND gr_fcat TO gi_fcat.
      CLEAR gr_fcat.
      gr_fcat-fieldname     = 'MJAHR'.
      gr_fcat-tabname       = 'GT_OUTPUT'.
      gr_fcat-seltext_l     = text-mjh.
      gr_fcat-seltext_m     = text-mjh.
      gr_fcat-seltext_s     = 'Mat Doc Yr'.
      gr_fcat-outputlen     = 40.
      APPEND gr_fcat TO gi_fcat.
      CLEAR gr_fcat.
      gr_fcat-fieldname     = 'JAN'.
      gr_fcat-tabname       = 'GT_OUTPUT'.
      gr_fcat-seltext_l     = text-jan.
      gr_fcat-seltext_m     = text-jan.
      gr_fcat-seltext_s     = text-jan.
      gr_fcat-outputlen     = 17.
      APPEND gr_fcat TO gi_fcat.
      CLEAR gr_fcat.
      gr_fcat-fieldname     = 'MJAN'.
      gr_fcat-tabname       = 'GT_OUTPUT'.
      gr_fcat-seltext_l     = text-mja.
      gr_fcat-seltext_m     = text-mja.
      gr_fcat-seltext_s     = text-mja.
      gr_fcat-outputlen     = 20.
      APPEND gr_fcat TO gi_fcat.
    so on ...
      CLEAR gr_fcat.
      gr_fcat-fieldname  = 'DEC'.
      gr_fcat-tabname    = 'GT_OUTPUT'.
      gr_fcat-seltext_l  = text-dec.
      gr_fcat-seltext_m  = text-dec.
      gr_fcat-seltext_s  = text-dec.
      gr_fcat-outputlen  = 18.
      APPEND gr_fcat TO gi_fcat.
      CLEAR gr_fcat.
      gr_fcat-fieldname  = 'MDEC'.
      gr_fcat-tabname    = 'GT_OUTPUT'.
      gr_fcat-seltext_l  = text-mde.
      gr_fcat-seltext_m  = text-mde.
      gr_fcat-seltext_s  = text-mde.
      gr_fcat-outputlen  = 20.
      APPEND gr_fcat TO gi_fcat.
    can anyone help me out and recity this
    thanks in advance.....
    Moderator message : Not enough re-search before posting, post only relevant portion of source code, discussion locked.
    Message was edited by: Vinod Kumar

    Hi meer,
    I saw your code , here in type declaration ty_out it's having only 12( jan to dec ) months you need to add 6 more months at type declaration and field catalog level also.
    Thats the reason why next year's data is overwritng the prev year data.
    I think Coloumn heading  (month names)  you need to determine dynamically in field catalog beacause 18 months name will depends on current month.
    Regards,
    Rajeev Goswami

  • Not able to display the values on the alv report.

    Hi all,
      loop at it_stpo.
        indx = sy-tabix.
        select single bdmng from resb into it_resb-bdmng
                        where matnr = it_stpo-idnrk
                        and xloek ne 'X'.
    it_stpo-bdmng = it_resb-bdmng.
    modify it_stpo index indx.
      endloop.
    in the above code, m fetchin the values of bdmng and populating it in the it_stpo.
    the values get populated in the internal table.
    But the problem is only the first value of all the entries gets populated.
    For ex:
    it_stpo-idnrk = C0201AA0800N ** under this components der r three entries***
    i want to display all three values of these entries.
    1.A0201AD6750N                          990
    2.A0201AJ0960N                           1,578
    3.A0201AJ1140N                           2,996
    but the value 990 gets repeated thrice for the above three entries. n the value 1598 n 2996 is not gettin displayed.
    lll, for all other entries. only the first entry value gets displayed for their respective components.
    suggest modification in my code so dat i cn display all the values.
    thanks in advance.
    regards,
    purva.

    Hi all,
      select bdmng from resb into corresponding fields of table it_stpo2
                for all entries in it_stpo
                 where matnr = it_stpo-idnrk
                 and xloek ne 'X'.
      loop at it_stpo2.
        move-corresponding it_stpo2 to it_stpo.
        append it_stpo.
      endloop.
    In the above code, m able to fetch the records in the table it_stpo2. but the data is not gettin populated in the final internal table it_stpo. Both the internal tables it_stpo & it_stpo2 are same.
    The data is gettin moved from it_stpo2 to it_stpo but only upto the header level. its not gettin appended in the table it_stpo even after using append stmt.
    Plz help me to resolve this issue. its urgent.
    Rgds,
    Purva

Maybe you are looking for