Not able to edit field entries in VCH2  t-code

When i modifying values in "Change AP search-stretegy(ZB01):classification" screen it is not saving the new values.
So thanks to help us in this regard.
Steps : goto t-code VCH2 -> enter stretegy type and press enter - > ct shipto/material ->enter shipto party, material number and execute ->select the entry and click on selection criteria.
Now here if i make any changes and come back to previous screen to save and then check my new values are not getting saved.
So for this is there any settings has to be done or need to check in SAP standard program?
Thanks to reply at the earliest.

Hello Venkat,
My requirement is to modify the field contents in VCH2 only.
And i am not able to access the string given by you it says the string does not exists so thanks to verify this once again.
Thanks,
Devasing.

Similar Messages

  • Dimension 1 Cost centre field is not able to edit in Incoming payment for Down payment Request

    Hi Exports,
    I am facing an issue on selecting Cost centres in Incoming payment screen.
    Issue: While I am booking the payment entry for Down payment request, I am not able to select first Dimension cost centre in Incoming payment rows for down payment request document, the Second dimension is able to select and update. the field is in non-editable mode (only on specific document row)
    Setup:
    1. Two Dimension are enabled
    2. In Separate Columns - Both Cost Centres are in separate column
    The above issue is only for Down payment request, for other documents (Invoice) I am able to select and update cost centre
    Please find below snap shot for reference
    Kindly check and let me know the solution
    Regards,
    Kiran

    Hi Gordon,
    Thanks for your reply.
    Yes agree, The Down Payment request is not a financial document but the Cost centres are able to select in Down payment request rows, no issue at all in this case.
    In Incoming payment screen it is necessary to select Cost centres because it has financial implication using down payment request with related to currency difference or Bank charges (both are Expense accounts) and DR assignment is mandatory in this case.
    And you have to notice one thing in above issue, I am able to select second dimension cost centre and it is allowing to edit and update the cost centre on respective row. Only issue is specific cell (dimension 1 cost centre) is not able to edit.
    Even I am not able to process payment entry without selection of Cost Centre on first dimension, the system is blocking and displaying the error message "DR Assignment is mandatory on Dimension 1 for specific account"
    Looks like bug, please clarify
    SBO version: 9.0 PL 11
    Regards,
    Kiran

  • Not able to post Service entry sheet

    Dear friends,
    I am not able to create service entry sheet as all the fields in service section are coming as grey in ml81n screen.
    I kept all the fields in field sel keys 4, ml81 & NB as optional.
    Pl guide why all these fields are coming in display mode
    thx
    Amitava

    Hi Amitava,
    the behaviour could be due to the  user exit EXIT_SAPLMLSR_001 (include ZXMLUU18).  Please check if this exit is active in your system.
    Regards,
    Edit
    Edited by: Edit Szabo on Mar 3, 2010 9:53 AM

  • Not able to Edit in the Notes

    Hi All,
    I have created one Notes and also defined in the SDK for custom business object but i am not able to edit that.
    Can you please tell me why it is not editable.
    Thanks,
    Malkit Singh

    Hi Malkit,
    Please check the below discussion for your reference :
    SAP Cloud SDK : Create Entry from ABSL (Root and Node Level) in Custom BO
    SAP Cloud SDK : Copy PhoneCall Activity Notes fields into Custom Notes fields
    SAP Cloud SDK : Display more 500+ character in the PDF form in table cell
    I hope this will be helpful.
    Regards,
    Mithun

  • Not able to create new entry in RSADMIN Table

    Hi All,
            I am going thru the OSS note 1275837  (Note 1275837 - PrecServer: process based load distribution (ABAP part)), as it recommends
            add the entry "BWPREC_USE_NEW_LOAD" with value "X" in table "RSADMIN"
          When I check in SE11 and SE16 there is no option to create button for above entry in table RSADMIN.
          Please advise for any help to create above entry.
    Thanks
    Ganesh Reddy.
    Edited by: Ganesh Reddy on Jan 11, 2010 4:20 PM
       I got access key from our basis team. But still not able to create new entry as mentioned in OSS note. Any further help....
    Thanks
    Ganesh Reddy.
    Edited by: Ganesh Reddy on Jan 11, 2010 9:13 PM

    Hi
    Goto SM30 - Table Maintanance Generator and enter the table name and click on button maintain ,it will show the error message
    "The maintenance dialog for RSADMIN is incomplete or not defined" because the table maintenance is not allowed manually.
    First Option
    When you double click the error message  a performance assistant screen will open in that you can see Procedure
    "Generate the required maintenance dialog" click on that and try to maintain the table using Access Key, as i dont have access key i have not tried this option.
    Second Option
    You can write an SE38 program with an insert statement.
    TABLES rsadmin.
    DATA: wa TYPE rsadmin.
    wa-object = 'object name'.
    wa-value = 'X'.
    INSERT into rsadmin values wa.
    Thanks

  • Not able to edit event names in iCal

    Since upgrading to Snow Leopard, I am not able to edit event names in iCal once they are created. I am able to edit all other items in the event, but not name. I have tried double clicking, using the inspector, etc. to no avail. Any ideas?

    I tried getting rid of duplicates in FontBook. I tried deleteing the iCal.plist file and restarting my mac. Nothing works. I can not edit any entry in any way except to drag it to a new place. I also can't open iCal Preferences. I have iCal 4.0.1 - is that the current version?

  • Not able to edit service ticket (complaint) in CRM

    Hi,
    The service ticket (complaint) in CRM has been replicated to R/3 as credit memo request, but the document in CRM is not able to edit. The error message is " Document is being processed, not possible to edit".
    I checked in SMW01, those tickets are unprocessed status, tried to reprocess but not to edit the document. Also tried to manully send to R/3 using toolbox transacton but no luck. I tried to push stucked queues in CRM but not moving.
    Pls suggest me what is the way to reprocess the stucked BDoc in CRM.
    Regards,
    Ram.

    Hi Sandeep,
    This happens when the document is distributed to ERP Systems. There are certain Item Categories that are sent to ERP System and only once the confirmations comes from those system you can further process those document.
    You won't find any errors there.
    You can check the BDOC Entries and then can find the target system where the document was distributed. And then logon onto that system and release that document.
    Hope this helps.
    Thanks,
    Samantak.

  • Buyer not able to change fields of SC in sourcing cockpit in SRM 7.0

    Hi
    We are on SRM 7.0 , SP 07 . We are in classic mode.
    Buyer is not able to change fields of shopping cart in sourcing cockpit like delivery date and quantity . He is able to add supplier and create PO . Even when he creates draft PO , he is not able to edit the fields of shopping cart like delivery date and quantity. Is it a standard Bug , is their any OSS SAP Note for this
    Regards
    Ashish

    As per SAP Standard BUYER can only vendor and Enter price and create  a follow on document.
    Buyer does not have a control to edit other data.
    Buyer wants to they can do it in ME21N ..PO
    not in the shopping cart

  • 3.6.8: I'm not able to edit the bookmark name before saving it.

    In any webpage on any tab:
    Cmd-d or click star twice.
    The Edit Bookmark dialog appears, with the Name field highlighted.
    My cursor doesn't change when placed over the highlighted Name field.
    If I click or double-click anyway, nothing changes.
    If I press Delete, the field contents are erased and I can type something in.
    The mouse still can't be used to move the cursor or highlight any characters in the field.
    I don't think I had this problem before 3.6.8.

    I'm not the only one with this issue: In https://support.mozilla.com/en-US/kb/Bookmarks?s=bookmark&as=s#threadId724632 --
    Anonymous writes:
    In the current version, 4.0b2pre, I am not able to edit the name of a bookmark before saving it. Hopefully a bug and not user error, I hate user error.
    Mon 12 of Jul, 2010 19:17 PST

  • I exported a pages document to word, but was not able to edit the new word document.

    i exported a pages document to word, but was not able to edit the new word document.

    I have a OSX IMAC Version 10.8.5.  I got pages at the same time I purchased this computer.  I use a document to write all my passwords. Seems like when I E-mail myself the document from pages, I have not been able to type in the document, it acts like it is locked. I checked all the "lock" and "unlock" fields, and none of them were locked.  I notice the document says PDF.  How do I correct this?  Seems like I've tried everything.  If you can help, that would be great!

  • Not able to edit the Webdynpro Adobe Form

    Hi all,
                 I am new to Adobe interactive forms. I have created an small application which includes the text boxes & tables. But when i execute the application I am not able to edit any of the text field values.
    we have done all the ADS Configurations successfully & we tested also.
    If anyone bring me the solution it wwould be more helpful to us.
    Regards,
    Malar.

    Malar,
      Please check the following...
    In the Life Cycle designer, goto Edit -> Form Properties -> Defaults and check in the XDP Preview format if you have "Acrobat 7.0.5 Dynamic PDF" and also in
      Tools -> Options -> Document Handling ->
    Check what do you have in the Default File Type for New forms drop down box and make sure it is : "Acrobat 7.0.5  Dynamic PDF Form File".
    Also try to deploy the Adobe Interactive Forms Tutorial application from(Online Interactive PDF Form) the following URL and see if everything is fine with the tutorial application.
    https://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#50
    Thanks!
    Surya.

  • Not able to edit the records in the table

    Hi Experts,
    I am not able to edit the records or delete the records from a database table.
    Those fields are not enabled.
    Edit icon is not at all there.
    Wat can i do.
    Cheers,
    Karthick

    Hi,
            In SM30, u can edit or delete records from a table.Before goin to this u need to create table maintainance generator for this table.
    regards
    lakshmi

  • Not able to edit the report created on different data source.....

    I have a query regarding Report in OBIEE - reports developed from BI Publisher are specific to data source on which they have been created ??
    i have a sample report that was created on different data source, i have the corresponding RPD also. I changed the data source according to my DB and when i try to update/edit the report,
    on Analytics for adding a new column, it is generating a seperate new Query from QueryBuilder for that additional cloumn rather than adding up the new query with the previous one(existing report query). Is it because of mismatch of data source on which report had been created and on which it is being update ?? if it is the case, where do i need to make changes related to JDBC connection or others ??
    when i try to create a new sample data set and try to update it, it adds up the extra edited things to original query and works perfectly fine. can ny 1 help me for the same ??

    Hi Denis,
    Normally,what we do is once we provide access to webi users group for each user from BO supervisor module, user(s) will able to refresh/edit the existing report from Full client BO.His colleagues have had no problem editing all his reports from their machines but he is not able to edit any report from his machine and BO is getting freeze.
    He also reinstalled BO and cleaned out everything on his Computer and re-built it but the issue is not yet resolved
    Can you please tell me how to resolve this issue
    Kind Regards,
    Srinivas

  • Not able to edit the report from BO 5.1

    Hi,
    User has Business Objects 5.1 version on his machine  and he is able to login to Business Objects 5.1.2 and can also open the BO reports from the required path
    When he edit the report, the BO is gettng hung and following errors occured one by one when he clicks ok button
    error1: "you must close this universe(name of universe) before importing it"
    when he clicks OK button on this error, second error is received
    error2: "Some obsolete objects have been removed from the query. (QP0027)"
    When he clicks OK button on this error, third error is received
    error3:"A connection required to refresh this document is unavailable(DA0004)"
    I am not understanding why these three errors are receiving one by one.Please tell me how to resolve above errors and edit the report
    kind Regards,
    Srinivas

    Hi Denis,
    Normally,what we do is once we provide access to webi users group for each user from BO supervisor module, user(s) will able to refresh/edit the existing report from Full client BO.His colleagues have had no problem editing all his reports from their machines but he is not able to edit any report from his machine and BO is getting freeze.
    He also reinstalled BO and cleaned out everything on his Computer and re-built it but the issue is not yet resolved
    Can you please tell me how to resolve this issue
    Kind Regards,
    Srinivas

  • Not able to edit the value options in LKM

    Hi
    I have recently upgraded to ODI 11g .
    In that we are not able to edit the value options in LKM.
    (i.e.. editor window is not appearing, not able to edit the text.
    Please let me know the solution .
    Thanks

    We were using JDK1.6.0_29 and it was not supporting ODI 11.1.1.5, so we have uninstalled the JDK1.6.0_29 and reinstall the JDK1.6.0_11.This solves our issue.
    Thanks a lot!!

Maybe you are looking for

  • ITunes Match Broken stuck in Loop

    iTunes Match no longer works. It seems stuck in an loop cycle of checking and uploading my tradks. Never had this problem before the latest iTunes update.

  • How to read dynamic file names in RSEINB00?

    Hi, ABAP Gurus, actually I'm a PI Consultant. Now I have a scenario to use the report RSEINB00. In the Applicaton Server i put ASCII IDocs with the following name convension: <static name>+<time stemple>: SAPIDOC20111127-224128-952.txt SAPIDOC2011112

  • Line item deletions in opportunity  which has folow up doc quotation

    the problem is that even after deleting the line item in quote which is followup doc and then trying to delete the line item in the opp it is giving the same error message - 010 cannot delete the Line item ## which is same as before deleting the line

  • Cropping doesn't work in iOS 8 Photos

    Whenever I try to crop a picture in Photos and tap done, it zooms in to one area and crops out the rest, totally unlike the one previewed. How to fix it?

  • SAP TABLE TO VIEW THE APPLICATION LOGS OF IDOCS

    Hi, Can you please suggest where I can see the table to view the application logs in idocs. We can see this individually in SLG1 or MM90. But I need to see it collectively to see all the error messages. Please suggest.