Not able to edit News Items in KM

Hi,
While trying to edit the News items in Content Management of SAP EP, getting  the below error.
java.lang.NoSuchMethodError: com/sapportals/wcm/repository/manager/cm/persistence/ITransactionContext.getResourcesForDeletionOnCommit()Ljava/util/Map;
t com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.addForDeleteOnCommit(BasicPersistenceDB.java:5487)
at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.releaseContent(BasicPersistenceDB.java:5112)
at com.sapportals.wcm.repository.manager.cm.CmRepository.isRollbacked(CmRepository.java:2054)
at com.sapportals.wcm.repository.manager.cm.persistence.TransactionContext$DefaultTransactionContext.wasRollbacked(TransactionContext.java:109)
at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.rollback(BasicPersistenceDB.java:491)
at com.sapportals.wcm.repository.manager.cm.CmNamespaceAndContentManager.setContent(CmNamespaceAndContentManager.java:2391)
at com.sapportals.wcm.repository.ResourceImpl.internalUpdateContent(ResourceImpl.java:3878)
at com.sapportals.wcm.repository.ResourceImpl.updateContent(ResourceImpl.java:1888)
at com.sapportals.wcm.service.xmlforms.utils.ResManager.updateResource(ResManager.java:660)
at com.sapportals.wcm.service.xmlforms.utils.ResManager.createOrUpdateResourceWithPropertyErrors(ResManager.java:833)
at com.sapportals.wcm.service.xmlforms.project.Project.doSave(Project.java:439)
at com.sapportals.wcm.service.xmlforms.project.Project.postStream(Project.java:295)
at com.sapportals.wcm.service.xmlforms.project.Project.saveItem(Project.java:371)
at com.sapportals.wcm.app.xmlforms.EditServlet.doGetAction(EditServlet.java:173)
at com.sapportals.wcm.app.xmlforms.XFBaseServlet.doGet(XFBaseServlet.java:241)
at com.sapportals.wcm.app.xmlforms.XFBaseServlet.doPost(XFBaseServlet.java:261)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.wcm.app.xmlforms.XFBaseServlet.service(XFBaseServlet.java:134)
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:322)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:557)
at java.security.AccessController.doPrivileged(AccessController.java:246)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Please let me know, how to overcome this error.

Ravi,
you might like to check (and implement) SAP Note 898637.
Hope this is help full!!!
Regards
Vijay K

Similar Messages

  • Not able to create new item

    Hi ,
    I am trying to create a new item at the master level and getting the following message :
    You are only authorized to access company 'ABC1000' .
    Value secured: You Are Only Authorised To Access Company 'ABC1000' .
    I am not able to change the accounts to ABC1000 in the cost of goods sold accounts and other accounts in the item creation screen.
    Is there any profile options that I am missing?
    Regards,

    Just keep in mind there might be other security rules that you may have to change as well.
    Sandeep Gandhi

  • Not able to see new Item in OPM-ASCP

    Hi everyone,
    I am working on OPM-ASCP.I have defined a Forecast Set,Schedule and a Sourcing Rule.When I am trying to assign the Sourcing Rule to an assignment set i am not getting my new item in the LOV.Please tell me what should i do?
    regards and thanks in advance,
    VAS.

    Hi ,
    I think you are doing al this from RSA1. Please user RSA1OLD for making any changes to 3.x data source.This avoids a lot confusions in terms of proposal and fields tabs which exists as a part 7.0 data source..
    In RSA1OLD , go to the change mode of data source you will be able to add the new fields.
    Hope this solves your issue.
    -Vikram

  • Not able to edit the Debit memo request after cancelling Billing document

    Hi,
    This is a process in SD/Customer service.The issue is even after cancelling the billing document we are not able to edit the item details in debit memo request..Pls suggest how we can edit the item details after cancelling the billing document
    Best Regards
    Jay

    Hi Jay,
    Yes, the whole sales document could not be deleted as well.
    Sorry for the misleading answer.
    As per the long text of error V1006, the document cannot be completely
    deleted because further processing has already taken place. Even though
    you have cancelled the subsequent documents, if you refer to the
    document flow, the subsequent documents might have already been created
    The cancellation of these does not delete the request.
    Please have a look at table VBFA in transaction SE16 and you can see
    that the subsequence documents are still displayed.
    What you can do is to enter a reason of rejection for all items to
    prevent further processing of the request.
    Please refer to Note 147028, you don't need to apply
    this note, please refer to part of "NOTE:...".This is a restriction
    of the system.
    For order-related billing, it is not possible to delete the sales
    document, even if the subsequent invoice has been cancelled.
    You have to reject the items.
    Cheers,
    Alex

  • I exported a pages document to word, but was not able to edit the new word document.

    i exported a pages document to word, but was not able to edit the new word document.

    I have a OSX IMAC Version 10.8.5.  I got pages at the same time I purchased this computer.  I use a document to write all my passwords. Seems like when I E-mail myself the document from pages, I have not been able to type in the document, it acts like it is locked. I checked all the "lock" and "unlock" fields, and none of them were locked.  I notice the document says PDF.  How do I correct this?  Seems like I've tried everything.  If you can help, that would be great!

  • Not able to create new folder in list/library sharepoint 2013 foundation

    I am not able to create new folder in library and also not able to edit existing list item
    Below is the error:
    Getting Error Message for Exception 
              System.Web.HttpUnhandledException (0x80004005): Exception of type 
              'System.Web.HttpUnhandledException' was thrown. ---> 
              System.NullReferenceException: Object reference not set to an 
              instance of an object.     at 
              Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureList()     
              at Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureListAndFor
              m()     at 
              Microsoft.SharePoint.WebPartPages.ListFormWebPart.UseLegacyForm()    
               at Microsoft.SharePoint.WebPartPages.ListFormWebPart.CreateChildCont
              rols()     at System.Web.UI.Control.EnsureChildControls()     at 
              Microsoft.SharePoint.WebPartPages.WebPart.get_WebPartMenu()     at Mi
              crosoft.SharePoint.WebPartPages.ListFormWebPart.CreateWebPartMenu()  
                 at Microsoft.SharePoint.WebPartPages.ListFormWebPart.OnLoad(Ev...
    Please help.It happens only on few sub sites

    Hi V_K04,
    You said that it happened only on few sub sites, whether this issue occurred on some subsites, and some subsite worked well.
    Please check whether there are some differences between the subsites that worked well and the problematic subsites. 
    Whether this issue occurred on all libraries and lists on problematic subsites.
    Whether there are some customizations in these problematic libraries and lists.
    Please create a new library and a new list, test again, compare the result.
    BestRegards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Not able to edit event names in iCal

    Since upgrading to Snow Leopard, I am not able to edit event names in iCal once they are created. I am able to edit all other items in the event, but not name. I have tried double clicking, using the inspector, etc. to no avail. Any ideas?

    I tried getting rid of duplicates in FontBook. I tried deleteing the iCal.plist file and restarting my mac. Nothing works. I can not edit any entry in any way except to drag it to a new place. I also can't open iCal Preferences. I have iCal 4.0.1 - is that the current version?

  • Not able to edit the report created on different data source.....

    I have a query regarding Report in OBIEE - reports developed from BI Publisher are specific to data source on which they have been created ??
    i have a sample report that was created on different data source, i have the corresponding RPD also. I changed the data source according to my DB and when i try to update/edit the report,
    on Analytics for adding a new column, it is generating a seperate new Query from QueryBuilder for that additional cloumn rather than adding up the new query with the previous one(existing report query). Is it because of mismatch of data source on which report had been created and on which it is being update ?? if it is the case, where do i need to make changes related to JDBC connection or others ??
    when i try to create a new sample data set and try to update it, it adds up the extra edited things to original query and works perfectly fine. can ny 1 help me for the same ??

    Hi Denis,
    Normally,what we do is once we provide access to webi users group for each user from BO supervisor module, user(s) will able to refresh/edit the existing report from Full client BO.His colleagues have had no problem editing all his reports from their machines but he is not able to edit any report from his machine and BO is getting freeze.
    He also reinstalled BO and cleaned out everything on his Computer and re-built it but the issue is not yet resolved
    Can you please tell me how to resolve this issue
    Kind Regards,
    Srinivas

  • Not able to create new entry in RSADMIN Table

    Hi All,
            I am going thru the OSS note 1275837  (Note 1275837 - PrecServer: process based load distribution (ABAP part)), as it recommends
            add the entry "BWPREC_USE_NEW_LOAD" with value "X" in table "RSADMIN"
          When I check in SE11 and SE16 there is no option to create button for above entry in table RSADMIN.
          Please advise for any help to create above entry.
    Thanks
    Ganesh Reddy.
    Edited by: Ganesh Reddy on Jan 11, 2010 4:20 PM
       I got access key from our basis team. But still not able to create new entry as mentioned in OSS note. Any further help....
    Thanks
    Ganesh Reddy.
    Edited by: Ganesh Reddy on Jan 11, 2010 9:13 PM

    Hi
    Goto SM30 - Table Maintanance Generator and enter the table name and click on button maintain ,it will show the error message
    "The maintenance dialog for RSADMIN is incomplete or not defined" because the table maintenance is not allowed manually.
    First Option
    When you double click the error message  a performance assistant screen will open in that you can see Procedure
    "Generate the required maintenance dialog" click on that and try to maintain the table using Access Key, as i dont have access key i have not tried this option.
    Second Option
    You can write an SE38 program with an insert statement.
    TABLES rsadmin.
    DATA: wa TYPE rsadmin.
    wa-object = 'object name'.
    wa-value = 'X'.
    INSERT into rsadmin values wa.
    Thanks

  • RH 9 - Not able to edit project settings (styles)

    Hi.
    Once I import my FM 9 files I'm not able to edit my project settings via the Project Settings dialog. I can access the dialog, but when I try to edit the Style settings, none of the current style settings display. I followed the directions in Online Help and it did not indicate that this could not be done with imported documents as opposed to linked documents. Could that be the reason why?
    Thanks in advance.

    While importing a FM document, the style settings can be done through import wizard. Following steps may be followed.
    1. Click File->Import->FrameMaker Document menu item.
    2. "Import File" dialog opens. Browse and select the desried FrameMaker document.
    3. "Content Settings" dialog appears. Do any TOC/Index/Glossary related setting if required. Click Next.
    4. Click "Edit" button.
    5. "Conversion Settings" dialog opens where style related settings can be done. The dialog will show all the styles of the FrameMaker document being imported currently.
    This way style settings can be done for FrameMaker document being imported.
    The "Conversion Settings" dialog opened through "Project Settings" dialog displays the styles of all the linked documents and not of imported document. However, if some settings are done for a linked document, those settings are available by default for all the FM documents being imported in the project.
    I hope this resolves the issue.
    Please let us know in case you have further queries.
    Mayank

  • Not able to edit service ticket (complaint) in CRM

    Hi,
    The service ticket (complaint) in CRM has been replicated to R/3 as credit memo request, but the document in CRM is not able to edit. The error message is " Document is being processed, not possible to edit".
    I checked in SMW01, those tickets are unprocessed status, tried to reprocess but not to edit the document. Also tried to manully send to R/3 using toolbox transacton but no luck. I tried to push stucked queues in CRM but not moving.
    Pls suggest me what is the way to reprocess the stucked BDoc in CRM.
    Regards,
    Ram.

    Hi Sandeep,
    This happens when the document is distributed to ERP Systems. There are certain Item Categories that are sent to ERP System and only once the confirmations comes from those system you can further process those document.
    You won't find any errors there.
    You can check the BDOC Entries and then can find the target system where the document was distributed. And then logon onto that system and release that document.
    Hope this helps.
    Thanks,
    Samantak.

  • Initially I had downloaded Document 2 (Free) application to view my doc, ppt and xls files. I was not able to edit the files so there was an option for upgrade the Document-2 free to paid version. I have upgraded the Document 2 application.

    Initially I had downloaded Document 2 (Free) application to view my doc, ppt and xls files. I was not able to edit the files so there was an option for upgrade the Document-2 free to paid version. I have upgraded the Document 2 application. But on my iPad now there are to application present Docemnt-2 (Free) and Document-2. I am not able to open any existing document using the upgraded version of application. How do I connect all the existing txt,PPT,XLS doccument to the new upgraded Document-2 application and then to edit it on my iPad.

    As suggested I had deleted the free application and did a hard restart the iPad. I have again copied the document using iTunes. But I am not able to edit any document using this app. Document 2 (paid version) supports editing features of the txt/ xls /ppt files. Is there any problem while loading the Document 2 app. If I reload then do I need to purchase again?

  • Employee is not able to Edit the Request if it is Rejected by the Approver.

    Hi,
        we are working on EHP5  , ECC 6.0  . We  are implementing claims and reimbursements . In our process if the employee raises the claim request in the portal and the approver rejects the claim request , employee is not able to edit the request in the portal . So please suggest the solution for this .
    Thank you
    lokesh

    Hello Lokesh,
    The edit feature of claims is on the basis of status. Approved & Rejected claim requests cannot be edited. The approver has got the option to edit the claimed amount on basis of the proof attached.
    Hence the approver can edit and then decide to approve or reject. But employees in case of any
    rejection of claims needs to reapply with a new claim.
    Regards,
    Pankaj

  • Not able to edit the Webdynpro Adobe Form

    Hi all,
                 I am new to Adobe interactive forms. I have created an small application which includes the text boxes & tables. But when i execute the application I am not able to edit any of the text field values.
    we have done all the ADS Configurations successfully & we tested also.
    If anyone bring me the solution it wwould be more helpful to us.
    Regards,
    Malar.

    Malar,
      Please check the following...
    In the Life Cycle designer, goto Edit -> Form Properties -> Defaults and check in the XDP Preview format if you have "Acrobat 7.0.5 Dynamic PDF" and also in
      Tools -> Options -> Document Handling ->
    Check what do you have in the Default File Type for New forms drop down box and make sure it is : "Acrobat 7.0.5  Dynamic PDF Form File".
    Also try to deploy the Adobe Interactive Forms Tutorial application from(Online Interactive PDF Form) the following URL and see if everything is fine with the tutorial application.
    https://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#50
    Thanks!
    Surya.

  • Not able to edit trellis

    Hi all,
    after patching OBIEE 11.1.1.6.0 upto 11.1.1.6.2 I am not able to edit trellis.
    Also, if I create a new analysis, choose the needed columns, go to the results and want to create a new view(trellis), it's not working.
    So, I need to go to the results, create a new trelli and then to choose the columns.
    This is really strange. Does anyone of you has an idea what the reason for this behavior could be?
    Thanks so far!
    --> There isn't even the "edit-symbol-pen" displayed ...
    Edited by: 941338 on 25.01.2013 10:20

    Hi,
    yes the "edit-symbol" is available there, but it doesn't work.
    A popup, which says "Access denied(EditView)" pops up!
    I will patch OBIEE upto 11.1.1.6.7 and hope those bugs will be fixed than!
    Thank you for everyones help!

Maybe you are looking for