Not able to Execute Header text in Quality server.
Dear All
I have created a text details in t.code SO10 and I have assigned this text to access sequence created in t.code VOTXN.When we create a Sales order the text is pre-populated from SO10 in Development client. All the settings are working properly in Development client.
We have transported all the settings to Quality Server, but text is not getting pre-populated in Sales order. Kindly advice.
Note: I have created a separate workbench request for t.code SO10 because TR is not generated.
Dear AP .
However I absorbed changes are not taking place in Sales order when we copy all the TR mentioned above from Client 200 to 270 for the first time, only when we copy or alter for the second time changes are taking place. Also last time when we transported the TR to Quality it was not triggering for the first time, only when change were made for the second time it triggered in Sales order.
Similar Messages
-
Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
From windows server 2012 and windows server 2008, Opened port 20,21,22 in firewall bidirectionally. After Establishing connection by passing credentials 230 log in successful.
ftp commands executing getting as " 425 Use Port or PASV first" , "500 Illegal PORT command".
But I could able to do windows client machines like windows 7 and windows 8 with same environment
Note : Firewall ports are opened. have tested by making firewall down to avoid filters.
Pandiyan MuthuramanHi Pandiyan Muthuraman,
Did you mean even you disable or open the related port the FTP issue still exist? I found this errors most time occur when we use the ISA firewall and the FTP configured passive
mode, if you have ISA firewall please refer the following KB to fix this issue.
How to enable passive CERN FTP connections through ISA Server 2000, 2004, or 2006
http://support.microsoft.com/kb/300641
The have a specific form for the IIS question, if you have the further IIS related question you can ask in IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Not able to pick PO text via READ_TEXT when PO is created by copy.
Hi,
I am not able to pick PO texts from READ_TEXT function module for PO's which are created via Copy of another PO as entries for that PO texts are not found in STXH table.However after creating PO if I do some modification in any text and save PO again then READ_TEXT is able to pick that text.
Please help.
Thanks.>
powerstar wrote:
> PLease try the sample code as shown below..
>
> data: lc_ebeln type ekpo-ebeln,
> lc_ebelp type ekpo-ebelp,
> lc_text type thead-tdname,
> lc_id type thead-tdid,
> lc_object type thead-tdobject.
>
> data: it_tline type table of tline,
> wa_tline type tline.
> *wa_ekpo type ekpo.
>
> concatenate wa_ekpo-ebeln wa_ekpo-ebelp into lc_text.
>
>
> lc_id = 'F03'.
> lc_object = 'EKPO'.
> call function 'READ_TEXT'
> exporting
> client = sy-mandt
> id = lc_id
> language = 'E'
> name = lc_text
> object = lc_object
> * IMPORTING
> * HEADER =
> tables
> lines = it_tline
> exceptions
> id = 1
> language = 2
> name = 3
> not_found = 4
> object = 5
> reference_check = 6
> wrong_access_to_archive = 7
> others = 8
> .
> if sy-subrc <> 0.
> * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
> * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
> endif.
>
> Regards,
> *******.
Did you get a chance to see what the OP is asking about? -
I am not able to execute the transport.send(message)
I am not able to execute the transport.send(message) when trying for sending mail. I am getting error like this : -
javax.mail.SendFailedException: Sending failed; nested exception is: javax.mail.MessagingException: Could not connect to SMTP host: 10.175.80.50, port: 25; nested exception is: java.net.ConnectException: Connection timed out: connect
Please help me on this to resolve this issue asap. thanksHi Vinod,
public void SendMail( )
//@@begin SendMail()
// Specify the host name of the mail server
String host ="----
IWDMessageManager messageMgr = wdControllerAPI.getComponent().getMessageManager();
// Initialize Session
Properties props = System.getProperties();
props.put("mail.smtp.host", host);
props.put("mail.smtp.auth", "true");
Authenticator auth = new Auth();
Session session = Session.getInstance(props, auth);
// Create new MimeMessage
MimeMessage message = new MimeMessage(session);
try
// Set the From Address
String from = wdContext.currentContextElement().getCtx_From();
message.setFrom(new InternetAddress(from));
// Set the To Address
String to = wdContext.currentContextElement().getCtx_To();
Address ar[] = new Address[1];
ar[0] = new InternetAddress(to);
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
// Set the Subject
message.setSubject(wdContext.currentContextElement().getCtx_Subject());
// Set the Text
message.setText(wdContext.currentContextElement().getCtx_Text());
Transport tr = session.getTransport("smtp");
tr.connect("Put again here Host Name", Port Noumber, "userid", "password");
tr.sendMessage(message, ar);
}catch (AuthenticationFailedException e){
messageMgr.reportException(e.toString(),false);
}catch (AddressException e) {
messageMgr.reportException(e.toString(),false);
} catch (MessagingException e) {
messageMgr.reportException(e.toString(),false);
}catch (Exception e){
messageMgr.reportException(e.toString(),false);
//@@end
And also create the class Auth() like
public class Auth extends Authenticator {
public PasswordAuthentication getPasswordAuthentication()
String username = "userID";
String password = "Passwod";
return new PasswordAuthentication(username,password);
Please check it i think i will work. Also please use constant value for the to, from, subject and text. -
We are not able to execute below procedure, plz help me ASAP.
Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
CREATE OR REPLACE PROCEDURE GETCHART(RPT_CURSOR OUT RPT_PACKAGE.RPT_RESULTS,
V_VITALCHARTING VARCHAR2,
V_DOCIDPATIENTS VARCHAR2,
v_fromdate varchar2,
v_todate varchar2) AS
D1 VARCHAR2(500);
D2 VARCHAR2(500);
G1 VARCHAR2(500);
R1 VARCHAR2(500);
R2 VARCHAR2(500);
R3 VARCHAR2(500);
R4 VARCHAR2(500);
R5 VARCHAR2(500);
H1 VARCHAR2(500);
H2 VARCHAR2(500);
V_COUNT NUMBER;
RC VARCHAR2(100);
RMI VARCHAR2(100);
RMAX VARCHAR2(100);
R12 VARCHAR2(500);
REQ NUMBER;
V_MAX number;
v_idcount number;
RSEQ NUMBER;
RCH VARCHAR2(500);
BEGIN
INSERT INTO TEMPDATA
SELECT ROWNUM G, TIME1
FROM (SELECT distinct TO_CHAR(H.RECORDEDDNT, 'mm/dd/yy hh24:mi:ss') TIME1
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
and TO_DATE(to_char(h.recordeddnt, 'DD/MM/YYYY'),
'DD/MM/YYYY') BETWEEN
TO_DATE(v_fromdate, 'DD/MM/YYYY') AND
TO_DATE(V_TODATE, 'DD/MM/YYYY'));
SELECT MAX(ID) INTO V_MAX FROM TEMPDATA;
V_IDCOUNT := 0;
WHILE V_IDCOUNT < V_MAX loop
FOR J IN (SELECT id, ROWNUM G, vdate time1
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
D1 := D1 || 'COL' || J.G || ',';
D2 := D2 || '''' || J.TIME1 || '''' || ',';
END LOOP;
D1 := SUBSTR(D1, 1, LENGTH(D1) - 1);
D2 := SUBSTR(D2, 1, LENGTH(D2) - 1);
DBMS_OUTPUT.PUT_LINE(d1);
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
G1 := 'INSERT INTO GETDATA2 (IDSLNO,idcount,' || D1 || ') VALUES(' || RSEQ || ',' ||
V_IDCOUNT || ',' || D2 || ')';
--EXECUTE IMMEDIATE G1;
DBMS_OUTPUT.PUT_LINE(d1);
DBMS_OUTPUT.PUT_LINE(SUBSTR(D2, 1, LENGTH(D2) - 1));
DBMS_OUTPUT.PUT_LINE(G1);
EXECUTE IMMEDIATE G1;
FOR K IN (SELECT id, ROWNUM G, vdate time2
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
FOR I IN (select s.*, rownum hslno
from (SELECT v.CHARTNAME,
v.PARAMETERNAME_CS,
' ' || v.PARAMETERNAME PARAMETERNAME,
TO_CHAR(H.recordeddnt, 'mm/dd/yy hh24:mi:ss') TIME1,
CASE
WHEN IDSLNO_GN5029 IN (1040, 1041) THEN
CASE
WHEN TO_NUMBER(d.recordedvalue) <
TO_NUMBER(D.MINVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'L')
ELSE
CASE
WHEN TO_NUMBER(d.recordedvalue) >
TO_NUMBER(D.MaxVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'H')
ELSE
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'N')
END END ELSE d.recordedvalue END IMAGECHAR,
d.minvalue,
d.maxvalue,
D.UOMCODE
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
ORDER BY V.DISPLAYORDER_CS, V.DISPLAYORDER
-- v.PARAMETERNAME_CS,v.PARAMETERNAME
) s
where s.time1 = k.time2) LOOP
select count(1)
into v_count
from GETDATA2 d
where d.PARAMETERNAME_CS = i.PARAMETERNAME_CS
and PARAMETERNAME = i.PARAMETERNAME
and idcount = v_idcount;
IF V_COUNT = 0 THEN
RCH := I.CHARTNAME;
R1 := 'COL' || K.G;
R2 := '''' || I.PARAMETERNAME_CS || '''' || ',';
R3 := '''' || I.PARAMETERNAME || '''' || ',';
R4 := '''' || I.IMAGECHAR || '''';
RC := '''' || I.CHARTNAME || '''' || ',';
RMI := '''' || I.minvalue || '''' || ',';
RMAX := '''' || I.maxvalue || '''' || ',';
R12 := '''' || I.UOMCODE || '''' || ',';
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
H1 := 'INSERT INTO GETDATA2 (IDSLNO,UMCODE,idcount,CHARTNAME,minvalue,maxvalue,PARAMETERNAME_CS,PARAMETERNAME,' || R1 || ')' ||
' values(' || RSEQ || ',' || R12 || v_idcount || ',' || RC || RMI || RMAX || R2 || R3 || R4 || ')';
EXECUTE IMMEDIATE H1;
ELSE
R5 := 'COL' || K.G;
R4 := '''' || I.IMAGECHAR || '''';
H2 := 'UPDATE GETDATA2 SET ' || R5 || '=' || R4 ||
'WHERE PARAMETERNAME_CS=' || '''' || I.PARAMETERNAME_CS || '''' ||
' AND ' || 'PARAMETERNAME=' || '''' || I.PARAMETERNAME || '''';
EXECUTE IMMEDIATE H2;
END IF;
END LOOP;
end loop;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || ' (' || minvalue ||
' -- ' || maxvalue || ') ' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue != 0
and maxvalue != 0;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue = 0
and maxvalue = 0;
UPDATE GETDATA2 S
SET S.PARAMETERNAME_CS = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY PARAMETERNAME_CS)
and idcount = v_idcount;
UPDATE GETDATA2 S
SET CHARTNAME = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY CHARTNAME)
and idcount = v_idcount;
UPDATE getdata2 s
set s.parametername = ' PARAMETER'
where s.parametername is null
AND S.PARAMETERNAME_CS IS NULL;
v_idcount := v_idcount + 8;
D1 := null;
d2 := null;
end loop;
for i in (SELECT G.PARAMETERNAME_CS, G.IDSLNO
FROM GETDATA2 G
WHERE G.PARAMETERNAME_CS IS NOT NULL) LOOP
INSERT INTO GETDATA2
(IDSLNO, PARAMETERNAME)
VALUES
(I.IDSLNO - 1 + 0.5, I.PARAMETERNAME_CS);
END LOOP;
update GETDATA2 h set h.PARAMETERNAME_CS = null;
update GETDATA2 h set h.chartname = rcH;
INSERT INTO GETDATA1
SELECT CHARTNAME,
PARAMETERNAME_CS,
PARAMETERNAME,
COL1,
COL2,
COL3,
COL4,
COL5,
COL6,
COL7,
COL8,
COL9,
COL10,
MINVALUE,
MAXVALUE,
UMCODE
FROM GETDATA2
ORDER BY IDSLNO;
OPEN RPT_CURSOR FOR
SELECT * FROM GETDATA1;
END;
CREATE OR REPLACE PACKAGE "RPT_PACKAGE"
as
type RPT_RESULTS is REF CURSOR;
type RPT_VARRAY is VARRAY(2000) of VARCHAR2(2000);
END RPT_PACKAGE;
Execute
declare
type my_newcursor IS REF CURSOR;
begin
GETCHART(my_newcursor,'General Vital Sign','1145561',sysdate-1,sysdate);
end;Parwez wrote:
Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
see a picture of my car.
my car won't go.
tell me how to make my car go.
How do I ask a question on the forums?
SQL and PL/SQL FAQ -
I am not able to display the text conditionally
i am not able to display the text conditionally
Please check the below formula.
i am not able to print all the below text,the text is printing only one line and some is missing.
Please do the needful.
@(If(("@Endrdesc1."=="EWWC006"),"12 It is hereby understood and agreed that any work in connection with the delivery or cartage of goods other than by hand, handcart, cycle or bicycle is expressly excluded from the indemnity granted under this policy 97 It is hereby understood and agreed that any work away from shop or studio is expressly excluded from the indemnity granted under this policy.","")) -
Not able to execute scenario in RA 14.0
Problem Summary
Not able to execute scenario in RA 14.0
Problem Description
[oracle@dev-rtlrmadb src]$ ./SIL_RetailLoadControlSeedData.ksh
OracleDI: Starting scenario SIL_RETAILLOADCONTROLSEEDDATA 001 in context DEVELOPMENT_INSTALL ...
2015-02-08 12:01:01.026 ERROR ODI-1217 Session SIL_RETAILLOADCONTROLSEEDDATA (20404) fails with return code 7000.
2015-02-08 12:01:01.099 ERROR ODI-1134 Agent Internal encountered an error: ODI-1217: Session SIL_RETAILLOADCONTROLSEEDDATA (20404) fails with eturn code 7000. Caused by: ODI-1226: Step RA_Log_Error_File fails after 1 attempt(s).
When checking in $MMHOME/error directory , the log is showing following error :-
Package Name-> SIL_RETAILLOADCONTROLSEEDDATA
Step Name-> SIL_RetailInitial_C_ODI_PARAM_Load
Error Details->
ODI-1226: Step SIL_RetailInitial_C_ODI_PARAM_Load fails after 1 attempt(s).
ODI-1240: Flow SIL_RetailInitial_C_ODI_PARAM_Load fails while performing a Loading operation. This flow loads target table C_ODI_PARAM.
ODI-1228: Task SS_0 (Loading) fails on the target ORACLE connection ORACLE_BI_APPLICATIONS_RA_INSTALL.
Caused By: java.sql.SQLSyntaxErrorException: ORA-01918: user 'radm01' does not exist
DB user exists. I'm able to login via sqlplus. Have checked in Physical schema and Logical schema also. All required Data Servers exeists in Topology -> physical / locical schema-> oracle. and tested the connection every thing is working properly.
Error Codes
ODI-1226 , ODI-1240 , ODI-1228 , ODI-1217 , ODI-1134 , ODI-1232
Problem Category/Subcategory
Retail Merchandising Analytics Issues
Uploaded Files
Template Question Responses
1) ### Steps to Reproduce ###
Go to $MMHOME/src .
Execute the ./SIL_RetailLoadControlSeedData.ksh from prompt. This gives the mentioned error.
I'm currently configuring Oracle Merchandising Analytics 14.0 . Referring guide " Oracle® Retail Analytics Installation Guide Release 14.0 E50594-05 ".
I'm at step number 11 ,
page no 58.Please help. Its urgent.
-
System should Not copy sales order header text
Hi all,
My requirement is system should not copy sales order header text while copying sales order to sales order with same order type.
for example i have order type OR - standard type with 500 line items with reference to that same sales order we are creating another order with same line 500 line items,but requirement is system should not copy source document header text in to target document header text,
Do you have any standard functionality to avoid this or we need to go exit
Regards
NishadHi,
You can do it via standard SAP configuration.
Transaction VOTXN.
In the access sequence you have the corresponding Text ID added with "Text Object" VBBK. That's the reason why you are copying text.
Change the entry.
Check below link on how exactly to do that. This doc says about how to copy customer text to the sales order. But procedure is same for you as well. Just the object is different.
[Text type config|http://learnsaptips.blogspot.com/2010/09/text-type-configuration-in-sap.html]
Hope it helps!
Best regards,
Rahal -
Iam not able to find Header, Navigation and Structure options in. I am using Dreamweaver CS6
Iam not able to find Header, Navigation and Structure options in Insert Panel. I am using Dreamweaver CS6
I've updated and now the problem solved. Thank you very much Ben...
-
Upgrading my Iphone 4 I am not able to access my text messages or send texts.
Hi Everyone:
Since the last 9 days after upgrading my Iphone 4 I am not able to access my text messages or send texts. I have attempted to delete the "68" messages however, once deleted for a period 2-3 seconds. The deleted messages reappears! I have reset. restored. did back-ups! Nothing has altered this problem. Has anyone else experienced this? Please help? Thanks :-)Thanks Diesel:
But I have been back and forth with my carrier and they are adament that this is not their issue but Apple's..... I do appreciate your reply! -
Not able to install Bea Weblogic RFID Edge Server in solaris10
Hi,
I am not able to install Bea Weblogic RFID Edge Server. I gave all permissions to that file.
$ ./rfid_edge220_solaris32.bin
./rfid_edge220_solaris32.bin: cannot execute
Could you please tell me the solution to resolve this issueHi,
I am not able to install Bea Weblogic RFID
Edge Server. I gave all permissions to that file.
$ ./rfid_edge220_solaris32.bin
./rfid_edge220_solaris32.bin: cannot execute
Could you please tell me the solution to resolve this
issueWhat is the output of " file fid_edge220_solaris32.bin". -
Not able to create VF on T5-2 server
Not able to create VF on T5-2 server..
My interface card supports 64 VF but while craeting i am getting below error.
root@Solaris11U1-T5:~#
root@Solaris11U1-T5:~# ldm ls-io -l /SYS/MB/PCIE3/IOVNET.PF0
NAME TYPE BUS DOMAIN STATUS
/SYS/MB/PCIE3/IOVNET.PF0 PF pci_2 primary
[pci@380/pci@1/pci@0/pci@6/oce@0]
maxvfs = 64
root@Solaris11U1-T5:~# ldm create-vf /SYS/MB/PCIE3/IOVNET.PF0
The parent bus pci_2 of the device /SYS/MB/PCIE3/IOVNET.PF0 does not currently
support IOV operations. Please check the iov= setting of this bus
root@Solaris11U1-T5:~#Hi - have you tried first issuing 'ldm set-iov=on pci@380' ?
regards, Jeff -
Not able to read the wsdl file from server Premature EOF encounter
Hi All,
I am facing issue while accessing a web Service from server. Here is the clear view about it.
I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
Now here i am facing peculiar behavior which i am not able to trace it out.
1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
Can someone please help in resolving the issue.
I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
Many thanks.
Tarak
Edited by: user11896572 on Jan 17, 2012 5:22 PMHi,
Setting default from the jdeveloper -
During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
Setting default from the em console -
After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
Refer -
http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
8.2 Managing the State of Deployed SOA Composite Applications
Thanks -
Not able to save any projects to PWA server from MSPS client
HI,
We are not able to save any project to PWA server using MSPS client. It says saving (0%). But not getting processed to pwa.
Thanks!
ShamsuddeenHi Shamsuddeen,
Have you correctly configure in MSProject the connection to Project Server?
See reference below:
http://office.microsoft.com/en-us/project-help/connect-log-on-to-project-server-HA010373238.aspx
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
I have upgraded my 3gs to the latest version - now I am not able to activare my iphone - It says ' Server is temporarly unavailable , please try later'
Morning Raju Mordani,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Best of luck,
Mario
Maybe you are looking for
-
MacBook Pro keeps crashing...I'm new to Mac please help?!?!
On several occassions everything I had saved on my MacBook stopped working. All the icons I had once placed on my dock disappeared and my settings were changed. Some of the programs I had previously downloaded were no longer available and I lost all
-
hi all Das anybody knows some Fuba ( Call funktion) for PP-Orders . I have to design an interface for Netplans. Thanks for your help chris
-
FF will not start for ONE Windows 7 User. All others work fine.
I try to start FF and it hangs. Loads into Project Manager, but no browser window.
-
Execution Permissions cannot be required error when opening SharePoint Central Administration
The following is the stack trace can anyone share what might be causing and how to resolve this. Execution permission cannot be acquired. Description: An unhandled exception occurred during the execution of the current web request. Please review the
-
hi again, i have situation where i have to perform a repetitive 'case' comparison. see below switch (var). case 1: [self.button1 setTitle: someText forState:UIControlStateNormal]; case 2: [self.button2 setTitle: someText forState:UIControlStateNorma