Not able to find saved WEBI reorts in BO 4.0

Hi,
I am experiencing weird Web Intelligence 4.0 behavior, I have upgraded report from BO 6.5 to BO XI 4.0 but now am not able to edit report, Edit option is available but when click on it then it doesn't opens edit window. Also same report when i try to save with different name then its not available in BI launchpad but if i try to save it again with same name it shows warning that 'Reports already exists with same name. Do you want to overwrite it?'
I am working on BO 4.0 patch 11.
Thanks in Advance.
Regards,
Ankita

Hi,
Check sap Note 1838654.may be it will help you.
As you mentioned you are on BO 4.0 Patch 11 it is very low patch.More possibilities these are bugs and SAP identified and fixed in later patches.
Better to upgrade on latest service pack and see.
Regards,
Amit

Similar Messages

I Not able to open saved pages in safari 8.0.3

I Not able to open saved web pages of safari in safari 8.0.3. Everytime i try to open a file it directly takes me to the TOP Sites page.... I am also not getting a option to reset safari.
Please help!!

1. Safari > Preferences > Extensions
    Turn those off and relaunch Safari.
    Turn those on one by one and test.
2. Use free AdwareMedic to remove adware
    http://www.adwaremedic.com/index.php
   Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
   Once done, quit AdwareMedic.

I restored my iPad and then repurchased App Pages. But I am not able to find my data saved with Pages before the restore. qwn

I restored my iPad and then repurchased App Pages. But I am not able to find my data saved with Pages before the restore. qwn

Those sites take a long time to load for me (almost a minute)
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Not able to find Interactive View Mode for WEBI in BI LaunchPad Preferences (BI 4.1 SP04).

Hi
I am not able to find Interactive View Mode for WEBI in BI LaunchPad's Preferences. It used to be there for BOXI R3. Is this feature has been revoked by SAP in this new release. Please confirm and clarify. Thanks!!

Hi,
In BI 4.0, We don’t have the option of Interactive mode, the only modes for viewing WebI documents are as follows:
1) Web: it is similar to the Interactive mode in XI 3.1. It means that you will use the HTML interface in BI launch pad to create, edit and analyze documents.
2) Rich Internet Application: This is similar to the Java Report Panel in XI 3.1.
You are using the Java interface in BI launch pad to create, edit and analyze documents .
But this requires the download of a Java applet.
3) Desktop (Windows only): in this case you are using Web Intelligence Desktop to create and edit documents, a standalone interface that works outside the BI launch pad. But this requires an install on your local machine.
4) PDF: Same as in BO XI 3.1
All view modes except PDF, have "Reading" and "Design" mode.
When you view a WebI document, the default mode is "Reading".
When you modify a WebI document, the default mode is "Design".
The user should use the modify option or view > Design, if he wants to modify a report.

Not able to find - Web Application Framework tab in IDE

Hi
I just downloaded the sun studio enterprise yesterday, I was trying to follow the tutorial for (http://developers.sun.com/prodtech/javatools/jsenterprise/learning/tutorials/jse7/webapp.html
Developing a Web Application)
The tutorial says
1. Select the Web Application Framework tab on the window at the left hand side of the IDE.
I am not able to find this tab on my IDE. Can anyone tell me how where to find/activate this tab.
I searched in all the Sub Menus I could not find it. Any help is appreciated.
Thanks,
Sai

Hi
Thanks for figuring that out, I searched for that tab for 2 hrs.
Where can I find the tutorial for creating a simple application in JSE8? I looked at
http://developers.sun.com/prodtech/javatools/jsenterprise/learning/tutorials/index.html#jse8
but everything looks like UML related.
Thanks
Jag

Not able to find driver page for HP 15-r007tx

Not able to find driver page for HP 15-r007tx.
The web site is able to detect my product, but when clicked on link Software & Driver Downloads, it says page not found.
Please help. I am looking drivers for windows 7 ultimate.

Hi Anoop22Sharma
Install:
Intel Chipset Installation
Intel Video Driver
NVIDIA High-Definition (HD) Graphics Driver
Synaptics Mouse Driver
Realtek Ethernet Controller Drivers
MediaTek(Ralink)802.11 b/g/n Wireless LAN (WLAN) Adapter
Ralink Bluetooth Software Driver
Intel USB 3.0 Driver for Intel 8 and U/Y Series
Realtek High-Definition (HD) Audio Driver
Realtek PCIe Media Card Reader Driver
HP 3D DriveGuard

Not able to find the created BI System

Hi,
I have configured the BI System as in the document.
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm
I am having few doubts.
1. Whether we need to choose only SAP system with load balancing template.
2. Whether we can set
BI Directory Provider: No
BI Master System: No
And also one more thing, I am using UIDPWD logon method. Whether there will any problem with this
I need clarifications on these.
Also after doing all these things i am not able to find the created BI System in VC.
When i test the same in Portal, it is saying the connection is successful..
Anyother step needs to be done, after this in configuration. Please let me know.
Please help me to resolve this issue.
Regards,
Palani
Edited by: Palani Appan on Sep 12, 2008 1:41 PM

Hi Inna,
Thanks for the reply.
But in Portal I have done the User Mapping between Portal Server and BI System.
I am using BI 3.5 System, Whether there will be any problem?
The BI Kit is already installed and i am able to view the components.
Still i am not able to get the System that i have created in portal into VC 7.1.
I am only getting Web Services created in that system and Service Registry and Visual Composer Models in Search Tab.
Whether we need to create a RFC destination also for this BI system?
Please help me to solve this issue.
Regards,
Palani
Edited by: Palani Appan on Sep 15, 2008 4:44 PM
Edited by: Palani Appan on Sep 16, 2008 9:42 AM

FindClass() not able to find the class in the same path

Hi,
I have a c prototype which calls a java function which push a message in JMS. i'm using jdk1.6. i have set JavaVMInitArgs vm_args.version = JNI_VERSION_1_6 when i compile the c code as gcc -g -lgcj -I $JAVA_HOME/include -I $JAVA_HOME/include/linux CallJMS.c the JNI_CreateJavaVM(&jvm, (void*)&env, &vm_args)* returns JNI_ERR. After changing version to 1.4 JavaVMInitArgs vm_args.version = JNI_VERSION_1_4 finally it gives me an executable which calls the java function (how ever the required functionality is not got)
To get the required functionality i had to use jdk1.6 so i changed the version property to JNI_VERSION_1_6 and the compiling command as gcc -g CallJMS.c -I $JAVA_HOME/include -I $JAVA_HOME/include/linux -L $JAVA_HOME/jre/lib/i386/server -ljvm .This gave me an executable, but when i execute it is not able to find the java class file. I have kept both the java and c file in the same path and also set the CLASSPATH. Please help.

Hi jschell,
I got solution to this problem. As you said it is due to wrong CLASSPATH set .
Before:
JavaVMInitArgs vm_args;
JavaVMOption options[3];
options[0].optionString = "-Djava.class.path=.:/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes";
options[1].optionString="-Djava.library.path=.:/home/program/jdk1.6.0_23/jre/lib/i386/server";
options[2].optionString="-verbose:jni";
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 3;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
I was setting the CLASSPATH to the Path where my java class files were kept. When the JVM instance is created only this path (where my java class is residing) is identified and the JMS and other paths which was already set in the CLASSPATH environment variable is lost. Thus when i call the java class from the c program it is not able to find the dependent class files and it was aborting.
After:
Before setting the path where my class files are residing to CLASSPATH, get the path's in the CLASSPATH to a variable, append the path where my class files are kept to this variable and then set the CLASSPATH . Similarly do for the LD_LIBRARY_PATH. This works fine.
char cpathBuff[100000];
char ldpathBuff[4096];
JNIEnv *env;
JavaVMInitArgs vm_args;
JavaVMOption options[3];
cpath = (char*) getenv("CLASSPATH");
sprintf(cpathBuff,"%s%s:%s","-Djava.class.path=",cpath,"/home/programs/JbossMetro/jboss-5.1.0.GA/server/default/deploy/JMSforCNew.war/WEB-INF/classes");
options[0].optionString = cpathBuff;
ldpath = (char *)getenv("LD_LIBRARY_PATH");
sprintf(ldpathBuff,"%s%s:%s","-Djava.library.path=",ldpath,"/home/program/jdk1.6.0_23/jre/lib/i386/server");
options[1].optionString = ldpathBuff;
vm_args.version = JNI_VERSION_1_6; //JDK version. This indicates version 1.6
vm_args.nOptions = 2;
vm_args.options = options;
vm_args.ignoreUnrecognized = 0;
int ret = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
if(ret < 0)
printf("\nUnable to Launch JVM\n");
else
printf("\nLaunched JVM\n");
Thanks for your support Peter and JSchell.
Edited by: 844094 on Mar 15, 2011 2:37 AM

Not able to find ...Create From Existing Service option in OSB 11g??

Hi,
Iam new to OSB....Iam doing a simple demo in wch i have a business service which calls a java web srvc...now when iam creating a proxy service to route the request to Business service..iam
not able to find the option Create From Existing Service option(proxy or business service ) option in the eclipse galileo ..can some one pllz help.??

I don't have osb/oepe running over here, but the option when you rightclick on the 'business service > oracle service bus > create proxy service from busiiness service' , is gone ?

After updating iOS 7 my iPhone 5 is not able to find my BOSE music system Bluetooth. Kindly help

After updating iOS 7 my iPhone 5 and 4S is not able to find my BOSE music system Bluetooth. However, my iPad can identify. How to solve this issue?

Try resetting network settings at Settings > General > Reset.
This will erase all saved wi-fi networks and settings for all previously connected wi-fi networks along with erasing all paired Bluetooth devices.

Not able to find ATP check button while editing items in Quotation(CRM 7.0)

Hi,
I am trying to edit the Packaged Quotation in CRM WEB UI. I need to do ATP check for the Items. But, I am not able to find any button for ATP check ( check Availability).
Can you plese let me know where can I find this button ....
Or
Do we need to do any configuration for this?
Thanks,
Sandeep

Hi,
I am trying to create from WEB UI (CRM 7.0). But, still I am not able to see any button for ATP.
Can you please tell me, where can we find this button....
Do we need to do any configuration for this button to be displayed....or is there any condition for the button to be displayed?
Please help me in this regard !!!!
Thanks,
Sandeep

Not able to find the HR Integrator Function in the Function

Dear All,
I am not able to find out the HR Integrator function in the Functions. Kindly do i need to do any setups or any other things to get this in place.
We are using Version R 12.0.6
Thanks and Regards,
Joshna.

Hi Duncan,
Sorry for the late response.
Please find the issue below.
- we wanted to create an HR Integrator for the Requisition and vacancy. For this we find the steps in the metalink. Please find the steps below.
When we are doing 5 th step we are not able to find the "HR Integrator" in the list of values. So we went and check the Menu there we find that HR Integrator function is not attached to the Menu. We tried to call that function but we are not finding that Function.
1.Check your IE and Excel/Word Settings.
2.Select the ‘Desktop Integration’ Responsibility
3.Click ‘Create Document’ function
4.Uncheck the Reporting Checkbox as this integrator is for uploading. Select the Viewer as Excel
5.Select the ‘HR Integrator Setup’ as the Integrator.Click "Next"
6.Select Content as "None" as we need to create the blank document for upload and Click "Next"
7.Click on "Create Document "
8.Once the spreadsheet is created, enter the following details and upload it back into the system.
Metadata Type : DOWNLOAD – to create download integrators
UPDATE – to create download / upload integrators
Application Short Name : PER
Integrator User Name : <User Defined Name for Integrator>
View Name : <User Defined View>
Form Name : Name of the Form to which the integrator is to be associated
API Package Name : API Package Name used to Upload Data (Only for UPDATE Integrators)
API Procedure Name : API Package Procedure (Only for UPDATE Integrators)
API Type : PROCEDURE / FUNCTION
Click on Oracle -> Upload to create the integrator
9.Define a Function using System Administrator -> Application -> Function. This function will be used to restrict the Responsibilities for which a particular integrator is available.
Function = Internal Function Name
User Function Name = User Defined Function Name
10.Create the Form Function Association Document using Web ADI Menu –Desktop Integration -> Create Document
Select Integrator as "HR Maintain Integrator Form Function Associations" and repeat step 4
11.Select the application in which the integrator is defined and the Integrator User Name for the Form Function Association has to be done. Click Next to continue.
12.Click on "Create Document" and Attach the Form Function created in step 9 i.e.Internal Function Name to the Integrator in the document created in the above step and upload the same.
13.Define the Layout for the Integrator created in above steps using
Desktop Integration -> Define Layout
14.Select the integrator for which the Layout has to be defined and click Go to continue.
15.Select the columns that will be displayed and click Apply
16. Navigate to the Form which you have attached in step 8 and Click on Export Icon.
You will be able to view the Integrator.

Not able to find entered price in Order

Hi Team,
While creating an order i have lanuch the configurator and selected required item and entered the price , but when i saved and came back to ordermanagement form i am not able to find the price, insted of entered price it showing as '0', Please let me know where i need to check for this?
Note: We found that for the item Price list shows as "0".
Thanks

Hello,
List Price Is Not Displayed In Configurator Summary [ID 731385.1] Look at.
Regards,
Luko

My tomcat server is not able to find out the servlet

Hi
I m working on Tomcat 4.2and i have java installation jdk 1.4.
But my tomcat server is not able to find out the servlet.
i have also made entry in web.xml file.I have compiled dervlet file.But yet not able to run it in tomcat.Plz help me

Go to the Tomcat site and read the "First Web App" docs. I'm sure you didn't deploy your servlet properly.
%

Not able to find data in Cube

Hi All,
Good Evening!
I am loading data from ODS to Cube. I am not able to find values for 0ORDER_CURR in the cube and also in the report which I built on the Cube. But they are present in the ODS.
Please help me to find the problem. Thanks in Advance...
With regards
Mahi

Hi Mahi..
Try to check is there mapping in ur Update rules for this 0ORDER_CURR.. if not then maintain the same..
Also let us know whether u have used this object at the cube level or not??? if not then try to maintain and then maintain the mapping as well from the DSO.....
this will solve the issue....
thanks..
Assign points if this helps...

Not able to find saved WEBI reorts in BO 4.0

Similar Messages

Maybe you are looking for