Not able to hear anything when I make calls..after upgrading

After upgrading to software version 3.1.3, I can not hear anything when I make calls.. Only able to speak through speaker option. Can anybody help...?
Message was edited by: halenbach

Here's one article that might help.
http://support.apple.com/kb/TS1630
Also, try these steps in this order.
Toggle Airplane mode off then on. Leave off for at least 10 secs
Toggle 3G Mode off then on. Leave off for at least 10 secs.
Power phone off and then on.
Remove and replace SIM card.
Those will fix that issue the majority of the time. If not, you'll need to restore the phone.

Similar Messages

  • I have an iphone6 and since morning I am not able to hear anything when I get a cll

    hi all,
    i have an iPhone6 plus and since morning I am not able to listen anything when I get a call. The speaker and ear phones are working fine.

    Howdy Saurav80,
    It sounds like you arent hearing anything out of the reciever speaker, but speakerphone and headphones work fine. I would use the troubleshooting in the following article to help determine what may be the cause:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do

    I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do

    The little lock has nothing to do with speaker volume.  It means you have locked the rotation on your iPhone.
    Have you tried using the volume control on the side of the iPhone to raise the volume when someone calls?

  • Ipone 4 people cannot hear me when i make calls.

    I synced my iPhone 4 and now people can not hear me when I make callow. Tried.connecting Bluetooth and same issue.
    I tried presenting and this did not fix either.  Please help.

    Hello TbOne,
    I highly doubt this Issue has anything to do with your recent syncing to your computer, it is a common fault that is becoming more and more predominate globally as time goes by.
    You merely thought back to the last interaction you had with your phone and connected it to your current Issue.
    May i ask if you can record a Video or use skype and see if you can hear sound, if indeed you can hear sound then your Phone is faulty and if you haven't a permanent loss of functionality of the microphone for voice calls there soon will be.
    My Advise would be to first see if the sound works when recording videos.
    <Edited By Host>

  • People Cannot Hear Me When I make Calls on iPhone 4, Bought a new iPhone 4, uploaded all of my own information from the backup, and it still doesnt work, help!

    I went in to apple, they couldnt figure it out, I am on AT&T so I was figuring on going into their store today and seeing if its something with the network, if not I am going back to apple, but this is literally a brand new phone i bought yesterday, not refurbished or anything, brand new, does anyone know why this isnt working? Everything else works fine, the mics both work, its just when I make calls or someone calls me the mic doesnt work.

    When you see the same issue on more than one hardware device, it means that the problem is likely to exist outside of the hardware.  Two things to investigate would be the software/firmware on the backup and issues with the cellular network.  It's probably safe to rule out the cellular network as well.
    First, make sure that you have imported copies of all the information (pictures, videos, documents) on the device.  Do this thorough itunes, and the applications (photographic and document processing) on your computer.  Perform a firmware update then restore the device as new.  If the problem persists, then you may actually have the worst luck and discovered two devices with an identical issue.
    Read each of the steps before initiating the DFU.
    !.  Connect the iPhone to any computer running a fully updated version of iTunes.
    2. Press and hold both "home" and "sleep/wake" buttons
    3. After eight seconds let go of only the sleep/wake button.
    4. Keep holding the home button until you see a popup mesage in iTunes.
    5. Read all all the popups, then use iTunes to update the iPhone's software.
    If the popup fails to show, repeat steps 2 through 4

  • Not able to edit mapings in PI 7.1 after upgrade

    Hi All,
    My team is facing an issue in which they are not able to edit any message mapping.This happens after we migrated from XI 3.0 to PI 7.1.
    Please let me know in case of any other information is required.
    Any help in this topic will be highly appreciable.
    Thanks,
    Anurag Singh Rathore

    Hi Anurag,
    You may try using the following role:
    "SAP_XI_CONTENT_ORGANIZER_J2EE"
    If not worked, then go to:
    -> Exchange Profile -> Integration Builder -> 'com.sap.aii.util.server.auth.activation'
    You need to switch the value to "false", save the changes, and restart
    the J2EE Engine. You should then be able to modify objects again.
    Last, by default, SAP ships the role "XIREP_UNRESTRICTED" which allows users
    to edit all the objects in the integration builder. You may use this.
    The following are the steps to use this role :
    1. Start the AS Java Identity Management
    2. Choose Identity Management.
    3. Search for XiRep_Unrestricted and select it.
    4. Choose Assigned Groups/users and then choose Modify.
    5. Search for the relevant user groups/user name
    6. Add this role to user and choose save.
    Also, please check the other thread I answered and use that note to import
    the ESR content. It may be missing and could be the cause as well.
    With regards,
    Caio Cagnani

  • Not able to see websites in Safari 6.0 after upgrading to Mountain Lion

    This weekend I updated to Mountain Lion from Snow Leapard. After the installation my machine rebooted. Once the machine reboot, I did another system update and the machine updated my iWorks and iPhoto apps. Once the machine updated the applications. I tried to go to several websites examples (cnn.com, ajc.com or even ebay.com) but the browser never shows the page. First I thought that my connection was slow or not working. But, when I look at the status bar. I see browser info is been loaded, but it never appears on my screen. I'm able to open another browser like Chrome and I'm able to access any page or link I click on, but I'm not able to do this in Safari. I'm able to see thumbnails of the websites, but when I  click on a thumbnail the page does not appear. Please help.. I prefer to use Safari over Chrome.
    Thanks for you help......

    Thank you.... so much.
    Solution: clear preferences in home library ~/Library
    Preferences> com.apple.Safari.plist

  • I am not able to hear sound when i call from my pc by pc suite

    subject gives the entire problem thank you

    Two different operating systems.
    It has nothing to do with the phones running different operating systems. Bluetooth is a platform independent standard. It's all due to the different Bluetooth profiles each device incorporates. iPhones do not have the file transfer profile.

  • Two iPhones, two contracts, both ring when one is called after upgrade to iOS8

    I have two iPhones 5s, one private, one for business. They have different numbers and use different carriers/service providers.
    They use both the same Apple ID for any iTunes store, Apple store or iCloud purposes.
    I've upgraded them both to iOS 8.
    When now someone is calling me, using either the private or the business number BOTH iPhones ring. This hasn't happened before and it's rather annoying and bad.
    Is there a way to stop this behaviour?

    This is a new feature to allow sharing of a cellular connection.  To disable it, either use separate iCloud IDs for the phones, or turn it off in Settings/ FaceTime/ iPhone Cellular Calls/ OFF.

  • Cannot hear anything when calling with iPhone 4

    I've had my iPhone 4 just over a year and for the past week or so I haven't been able to hear anything when making or recieving calls. Also when going to answer a call it freezes and shuts itself down. I have done the restore and also restored it from new loosing my stuff and this still hasn't fixed it. It also doesn't have any sound when using headphones either. Anyone have any ideas or advice?? Thanks

    Sometimes if you are nice to them they will replace it even if it is out of warranty. And if they won't there is a flat fee of $149 to replace it.

  • TS4449 When i make call from iphone,loudspeaker is being enabled automatically and not able to  hear any sound ..

    When i make call from iphone,loudspeaker is being enabled automatically and not able to  hear any sound ..
    And some time it's worked...

    OMG.....this very tiny hole located next to the headset jack........I suffered for the same issue around 20 days after purchasing my iPhone 4S. Even I visit the apple store too, they suggested to talk with apple online.....just before going to apple, i was reading "iPhone: Hardware troubleshooting" (http://support.apple.com/kb/TS2802) and at the very first line, i found "Make sure that nothing is blocking the top microphone (located next to the headset jack)." and this located next to the headset jack solved the problem completely for sound in vidio as well as sound with calling speaker phone.....Actually, I purchased a plastic cover (like screen protector type) that blocked this small hole (microphone hole i think) and the problem was because of this...I remember on the first day i talk with speacker phone (nothing on iPhone at that time) and it was working...
    No need to restore or hard reset anything...i was fearing i'll lost everything if I hard reset my iPhone that took 5-10 to build my iPhone as I like apps, music, vidio on it....

  • When i make call from iphone,loudspeaker is being enabled automatically and not able to  hear any sound ..So Please need Full Answer?

    When i make call from iphone,loudspeaker is being enabled automatically and not able to  hear any sound ..

    reset all settings
    settings-general-reset-reset all settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    if issue persists back up and restore as new via iTunes
    Peace, Clyde

  • Hello all.. i have iphone 3gs..when i make a call, the other person is not able to hear me.. pls help me regarding this issue.. thanks

    when i make a call to anyone, the other person is not able to hear me...

    its common problem for iphone try this one ist
    go to settings>general>reset>rest all settings phone will turn off and turn on by itself
    once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on

  • I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

    I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

    Hi CMorenoOT,
    This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
    iTunes: How to set up an Apple ID within iTunes
    http://support.apple.com/kb/HT2731
    Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
    - Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
    - Once you've filled out all of the fields for your billing information, tap Next.
    For more information:
    Using an existing Apple ID with the iTunes Store and Mac App Store
    http://support.apple.com/kb/HT2589
    Thanks,
    Matt M.

  • Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me?  The volumn is turned up but I can't seem to resolve the issue?  Thanks

    Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me?  The volumn is turned up but I can't seem to resolve the issue?  Thanks

    Oh no, Robinbird18! This is not what we like to hear about your cell phone. It makes it pretty hard to have a conversation with someone when you can't hear them. If you make a phone call out are you able to have a conversation with someone without any issues? How long has this been going on? Have you tried to use the phone on speaker phone to see if that works at all? Please keep us posted.   KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Maybe you are looking for

  • Using 27++ battery with Thinkpad T510

    Hi, I have just purchased a T510 with the 27++ slice battery, the battery "User Guide" is anything but ! Can someone please tell me whether there are any restrictions on when I connect & disconnect the slice battery? i.e., can it be plugged and unplu

  • Background folder went black

    I have macbook pro mid 2010 with Snow Leopard. I formated my laptop 3days ago, so right now I have to install all the softwares I need I was just installed my calibrator software (Spyder Elite 3) and when I tried to calibrate my monitor, the software

  • Need Help in Data Type

    Hi : I am developing a applicaition in apex i have a reqirement like this i have created a check box, Check box will normally have check and uncheck values which is like 0 and 1 now i need to create a table to hold these values if i check it must hol

  • Importing only tables from full export

    hi, our database is going to get live.. Oracle 10GR2 Windows 2003. i have full expdp dump file... i just want to import only tables from that dumpfile.. how can i do that.. there are around 1059 tables... searched over the net but did not find anythi

  • Element Panel Drag and drop

    I can't seem to be able to drag and drop in the elements panel I have to draw a box in something in order to drag something into it