Not able to hear call waiting beep in my Nokia N8 ...
Not able to hear call waiting beep in my Nokia N8 after Nokia Belle software updated
Mahesh
Settings > Calling > Call > Call waiting > Activate
If my post has helped you please click the white star on the right
Similar Messages
-
when i make a call to anyone, the other person is not able to hear me...
its common problem for iphone try this one ist
go to settings>general>reset>rest all settings phone will turn off and turn on by itself
once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on -
My Iphone 5 voice speaker is not working.I'm not able to hear the voice of the person calling.But when I put my iphone 5 on speaker mode, things seem ok.Please provide me some suggestions.
Hello rizvijunaid,
Thank you for providing the details of the issue you are experiencing with calls on your iPhone. I recommend following the steps in the article below for the issue you described:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Thank you for using Apple Support Communities.
Best,
Sheila M. -
When i make call from iphone,loudspeaker is being enabled automatically and not able to hear any sound ..
And some time it's worked...OMG.....this very tiny hole located next to the headset jack........I suffered for the same issue around 20 days after purchasing my iPhone 4S. Even I visit the apple store too, they suggested to talk with apple online.....just before going to apple, i was reading "iPhone: Hardware troubleshooting" (http://support.apple.com/kb/TS2802) and at the very first line, i found "Make sure that nothing is blocking the top microphone (located next to the headset jack)." and this located next to the headset jack solved the problem completely for sound in vidio as well as sound with calling speaker phone.....Actually, I purchased a plastic cover (like screen protector type) that blocked this small hole (microphone hole i think) and the problem was because of this...I remember on the first day i talk with speacker phone (nothing on iPhone at that time) and it was working...
No need to restore or hard reset anything...i was fearing i'll lost everything if I hard reset my iPhone that took 5-10 to build my iPhone as I like apps, music, vidio on it.... -
When i make call from iphone,loudspeaker is being enabled automatically and not able to hear any sound ..
reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde -
I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do
The little lock has nothing to do with speaker volume. It means you have locked the rotation on your iPhone.
Have you tried using the volume control on the side of the iPhone to raise the volume when someone calls? -
Hi Guys, suddenly I am not able to hear on my iphone 3GS whenever I receive a incoming call(it's very hard to hear wat the other people is saying)
I had my GENIUS appointment today. They did a couple of tests by plugging my iPhone into a macbook and both came back without showing problem. However as the genius was working with my phone he ran into the same problem with 3G and I had taken some screen shots showing full signal strength but unable to make a call, failure to send mms, and internet unable to connect, so he switched out my phone for a new one as I am still under warranty for another 3 months.
Make sure you backup your data and restore your phone as a new phone before going in to see a Genius, otherwise they may choose to try that process first and do some diagnotistic tests before being able to switch it out, and that can take up to 4 days.
Best guess by the Genius was that it was a hardware problem with the internal cellular antenna. He also recommended I get a new (free) SIM card from AT&T which I did (kiosk was in same mall)
So bottom line...if your 3G is messed up, make an appointment with Apple Genius. Thanks to all who tried to help, but mostly thank you apple Genius for great customer service. -
Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me? The volumn is turned up but I can't seem to resolve the issue? Thanks
Oh no, Robinbird18! This is not what we like to hear about your cell phone. It makes it pretty hard to have a conversation with someone when you can't hear them. If you make a phone call out are you able to have a conversation with someone without any issues? How long has this been going on? Have you tried to use the phone on speaker phone to see if that works at all? Please keep us posted. KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
-
my phone has just gone dead need to revive my phone, someone calling me can hear the dailer tone but i am not able to hear any ring, kindly suggest. the monitor is all blank
Thank you so much you really hepled, my phone is working again phew!!!
-
Callers are not able to hear my voice
I have an issue with iPhone 4 with iOS 4, callers are not able to hear my voice even when I use the earphone or speaker. I am able to record voice memos and can hear the playback, and no issues with listening to music, videos, youtube...etc. The mute button is not on.
I tried erasing network settings and all settting but could not fix the problem. I have not tried erase all contents yet since I am not sure if this is a software or hardware issue.
Has anyone seen this problem before and can assist or if someone can give suggestions?
Thanks..MHi, nik007hil. Welcome to our community! Is this happening to all your calls? Do you have a stable network connection? Note that having a bad network connection may cause this. BTW, tell us what phone model do you have, so we can further check. We'll wait for your feedback.
-
Not able to Hear other person when Handset is activated
I have the problem of not being able to hear the caller. They are not having any issues on hearing the voice. Issue wasn't resolved after pulling the battery as suggested in other threads.
Interesting fact is: When I activate the speaker phone (either by blackberry options / by pressing the button "."), I am able to hear them. When handset is activated, I am not able to hear the caller. I checked bluetooth was disabled.
Any clue on what is wrong with the headset?
ThanksHey mzmeel,
If you are having an issue with sound on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L -
I am not able to hear a conversation
Hi,
I have an issue with my iPhone 4. When I receive/make a call, I am able to hear the other person, but the person on the other line is not able to hear me at all. This happens at all times. However, if i tap the phone hard on the back, hearing is restored for a while after which it goes again.
I have tried a lot of things to fix it, but no avail.
Can you please help.
P.S. This happened after I dropped my iPhone. (Didnt drop it too hard or from a height)
MalliRamTry doing a hard reboot of the iPhone
1. hold the power and home buttons down
2. you will see the "swipe to turn off" screen come up... KEEP HOLDING THE BUTTONS
3. The screen will go black (turn off)... KEEP HOLDING THE BUTTONS
4. A white Apple logo will appear on the screen, now you can release the buttons. Let the iPhone boot... should only take a couple minutes. -
Not able to get calls from landlines in my E51
All of a sudden I am not able to recieve calls from landlines, the caller gets long ring or proper ring tone giving impression that I am not picking up
I had in addition to incoming calls from landline I had other unique issues
1. Mobile use to get reset every time when I try accessing to internet
2. I was not able to upgrade the sw since it use to get reset and use to get repeated message to re initiate
Finally I rest the phone to factory setting and
every problem got resolved and my phone is back to life as it was when I bought it -
iphone 5 not able to hear audio through receiver jack. have cleaned it as well as restarted it. no issue. feeling depressed
- You are doing a double upmix/downmix. For me, I tried playing a movie I bought from ITUNES. It was 00% 5. sound but I, like you, only heard 4 channels. Then I realized that on my Logitech analog speakers that I had pressed the "matrix" button which is meant to physically take stereo and put it through all fi've speakers. So VLC was playing the file just fine but my speakers were taking the fi've to one sound and making it stereo.
-
Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.
Take each of the following steps that you haven't already tried.
1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
2. From the menu bar, select
▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
8. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.
Maybe you are looking for
-
Cannot render special HTML character with Java
I'm pretty sure this is a general Swing issue, please don't ignore this because I reference JavaHelp. When using JavaHelp and French as the displayed language, I'm having problems displaying the œ character (HTML entity &# 156;). Below I've incl
-
Installing Essbase 11.1.2.1 EPM System Configurator
Hi, I'm installing Essbase on a windows 2008 R2 server. After doing the installation following the guide "Rapid deployment of Essbase domain for development environments" and this step by step, i got stuck (some days already) on the setup Shared serv
-
I have below script to take incrmenat 1 backups . run { #Hot database level 1 incremental backup allocate channel x3 type 'SBT_TAPE'; allocate channel x4 type 'SBT_TAPE'; sql 'alter system archive log current'; (How this command help ) backup increme
-
Moving a Logic selling to a new Macbook pro
Hi, i've been running Logic on my macbook for a few years and i've just bought a new macbook pro and installed my copy of Logic and it won't open. I get a message saying Logic unexpectedly quit. I've done a bit of reading around and I didn't realize
-
hi there, can u please let me know the use of reports RBDMANIN, RBDMANI2, RBDAPP01, RBDMON00