Not able to hear sounds from music or games
Not able to hear sounds on music or games
Hi All,
We worked with cisco TAC, and finally identified it is codec issue.
when we are setting codec g711 on location1 CUBE dial-peer, its working fine.
Similar Messages
-
Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.
Take each of the following steps that you haven't already tried.
1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
2. From the menu bar, select
▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
8. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed. -
My Iphone 5 headset is not working?Not able to hear sound (for eg:Music)
My Iphone 5 headset is not working?Not able to hear sound (for eg:Music)
Try disconnecting the headphones and then adjusting the volume, does it say headphones?
There might be something in the headphone jack, maybe lint, dirt, or something else in there.
Take a look at this Apple document for more information -> iPhone: Can't hear through the receiver or speakers -
Unable to hear sound from music video (ipod touch)
Hi all,
I have uploaded the video to ipod touch. But I could only watch the video and could not listen any sound from it. Please advise if I have to convert the file before I upload it.
Thank you.If Carolyn's advice does not achieve the desired result, try a PRAM reset:
http://support.apple.com/kb/HT1895
Ciao. -
I am not able to hear sound when i call from my pc by pc suite
subject gives the entire problem thank you
Two different operating systems.
It has nothing to do with the phones running different operating systems. Bluetooth is a platform independent standard. It's all due to the different Bluetooth profiles each device incorporates. iPhones do not have the file transfer profile. -
When i make call from iphone,loudspeaker is being enabled automatically and not able to hear any sound ..
And some time it's worked...OMG.....this very tiny hole located next to the headset jack........I suffered for the same issue around 20 days after purchasing my iPhone 4S. Even I visit the apple store too, they suggested to talk with apple online.....just before going to apple, i was reading "iPhone: Hardware troubleshooting" (http://support.apple.com/kb/TS2802) and at the very first line, i found "Make sure that nothing is blocking the top microphone (located next to the headset jack)." and this located next to the headset jack solved the problem completely for sound in vidio as well as sound with calling speaker phone.....Actually, I purchased a plastic cover (like screen protector type) that blocked this small hole (microphone hole i think) and the problem was because of this...I remember on the first day i talk with speacker phone (nothing on iPhone at that time) and it was working...
No need to restore or hard reset anything...i was fearing i'll lost everything if I hard reset my iPhone that took 5-10 to build my iPhone as I like apps, music, vidio on it.... -
When i make call from iphone,loudspeaker is being enabled automatically and not able to hear any sound ..
reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde -
i cannot hear any sound from music player and also i am unable to listen to any calls i am receiving.kindly help.
Did you already reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can cure some glitches.
If this does not help, try to set it up as new device, explained here:
How to back up your data and set up as a new device -
i am not able to hear any sounds of games on the speaker. Though the sounds function on the head fones. The speaker works perfect in other applications except games.Have checked all the settings but not able to fix it.
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and its the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If that doesn't solve it then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I recently had wanted to sign-up for an e-card web-site. However, when I clicked on the web-page, I am NOT ABLE TO HEAR ANY MUSIC. The message shown is that Apple does not support MIDI music.
What other software can I download in order for me to listen to the music on this web-page?Systran wrote:
I recently had wanted to sign-up for an e-card web-site. However, when I clicked on the web-page, I am NOT ABLE TO HEAR ANY MUSIC. The message shown is that Apple does not support MIDI music.
Please don't tell my wife this, she's been working with MIDI on her Mac(s) since the turn of the century...
The statement from that web site is completely incorrect. What they probably meant was that their software doesn't support Mac. IMHO this is a sign of either ignorance or lack of concern on the part of the site creators. Back in the dark ages a lot of PC apps didn't support Mac but not these days.
Get into your Mac Help window and search MIDI. There's plenty of info there on how your Mac supports MIDI. -
how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?
Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ? -
after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.
Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
Also make sure that you are selecting built in speakers for your audio output.
If that does not fix it try doing a Pram reset.
Shut your mac down.
Press the startup button.
Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it. -
I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do
The little lock has nothing to do with speaker volume. It means you have locked the rotation on your iPhone.
Have you tried using the volume control on the side of the iPhone to raise the volume when someone calls? -
Im not able to download movies and music purchased from my iTunes on my iPad iOS 6.1. The download begings to show and once the dowload appears 100% done, I get a message "unable to download". please help
You have to have an internet connection, either wireless or through a computer with iTunes. When you choose Software Update you can only update to the latest version for your iPod Touch, iOS 6.1.6
-
Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me? The volumn is turned up but I can't seem to resolve the issue? Thanks
Oh no, Robinbird18! This is not what we like to hear about your cell phone. It makes it pretty hard to have a conversation with someone when you can't hear them. If you make a phone call out are you able to have a conversation with someone without any issues? How long has this been going on? Have you tried to use the phone on speaker phone to see if that works at all? Please keep us posted. KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!
Maybe you are looking for
-
Help! a client wants me to create a website and would like me to create it with CMS! How do I do that with dreamweaver?
-
Oracle Forms and Oracle Reports interation without Oracle Portal
Hi to all Can I integrate the application developed in Oracle Forms and Oracle Reports without Oracle Portal with Single Sign On. and if yes then how? and if no then why? I use 9iAS relese 2 installed on machine 1 Oracle Database installed on machine
-
Finding items in trash after it has been emptied
2 years ago when i bought my Mac I copied photos from my old PC to the Mac using a portable hard drive. I discarded the Pc and have used the Mac Happily ever since. Today i discovered that all my photos dating back to before i got my Mac disappeared.
-
Hi! what is thу main difference between synchronous and asynchronous bpel process? I mean, when you create bpel process - you can choice type. Because I dont think that the difference just in invoke and reply activities. Message was edited by: kpb
-
Delete inbound delivery in EWM
Hello, i am new in the page and hope you help me. Briefly about the problem: Recently we have inactive storage location (2171), which is not used. Often our users make mistakes and habit they publish to it. With the result that the HU's stuck between