Not able to import the article with sidecar.xml

Hi,
With the new DPS version (ver. 18), we are not able to import the article with sidecar.xml. Could you please check and suggest the solution for the same.
With Regards,
Anil Yadav

I read that your sidecar needs the author-value to be working.
—Johannes
(mobil gesendet)
Am 30.01.2012 07:54 schrieb "Anil Yadav" <[email protected]>:
not able to import the article with sidecar.xml created by Anil Yadav<http://forums.adobe.com/people/Anil+Yadav>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4173103#4173103>

Similar Messages

V18 : can't import multiple articles with sidecar.xml ?

Hello,
I have successfully upgraged to v18 (tools and folio panel).
Now, I can't import multiple articles if there's a sidecar.xml file.
If I remove the sidecar, it works.
Do you experiment this problem ?
Thanks

Here's an example of a faulty sidecar.xml
<?xml version="1.0" encoding="UTF-8" standalone="true" ?>
<sidecar>
          
          
          <entry>
                    <folderName>couv</folderName>
                    <articleTitle>Couverture</articleTitle>
                    <author></author>
                    <kicker></kicker>
                    <description></description>
                    <tags></tags>
                    <isAd>false</isAd>
                    <smoothScrolling>never</smoothScrolling>
                    <isFlattenedStack>false</isFlattenedStack>
          </entry>
          
          <entry>
                    <folderName>intro</folderName>
                    <articleTitle>Introduction</articleTitle>
                    <author></author>
                    <kicker></kicker>
                    <description></description>
                    <tags></tags>
                    <isAd>false</isAd>
                    <smoothScrolling>never</smoothScrolling>
                    <isFlattenedStack>false</isFlattenedStack>
          </entry>
          
          <entry>
                    <folderName>sommaire</folderName>
                    <articleTitle>Sommaire</articleTitle>
                    <author></author>
                    <kicker></kicker>
                    <description></description>
                    <tags></tags>
                    <isAd>false</isAd>
                    <smoothScrolling>never</smoothScrolling>
                    <isFlattenedStack>false</isFlattenedStack>
          </entry>
          
          <entry>
                    <folderName>pubTV</folderName>
                    <articleTitle>Pub:TV</articleTitle>
                    <author></author>
                    <kicker></kicker>
                    <description></description>
                    <tags></tags>
                    <isAd>false</isAd>
                    <smoothScrolling>never</smoothScrolling>
                    <isFlattenedStack>false</isFlattenedStack>
          </entry>
</sidecar>

I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ?

I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting

I have an iPhone 4 also. If you are referring to the flyover view, its unavailble for the iPhone4. If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
Hope this helps

Not able to reset the page number in XML Publisher based on each PO

Not able to reset the page number in XML Publisher based on PO
Hi,
I have created a custom purchase report and rtf template. In the rtf template, I have added the page number feature (i.e. Page 1 of 5) from Word in the template. When I run the report for a range of POs, I expect the results as follows:
I have given 3 POs on single request. (PO#1 has 3 pages, PO#2 has 2 pages and PO#3 has 4 pages), the page number on each PO should look like as follows:
PO#1 page 1 of 3, page 2 of 3, page 3 of 3
PO#2 page 1 of 2 page 2 of 2
PO#3 page 1 of 4, page 2 of 4, page 3 of 4 and page 4 of 4
But the page number displays on each PO as follows:
PO#1 page 1 of 9, page 2 of 9, page 3 of 9
PO#2 page 4 of 9 page 5 of 9
PO#3 page 6 of 9, page 7 of 9, page 8 of 9 and page 9 of 9
Here I have to reset the page number based on each PO. If anyone done this already, can you please share with me.
Thanks,
Ram.

Hi
One clarification please.
Are you putting Page # of ## in the for-loop section? I mean it should be within For-each@section block.
Even if this doesn;t work, then try using Insert->Page Break after every PO.
Regards
Varun

I am not able to save the pdf with filled data or related to reader extension

Hi,
I have designed a pdf with some text field controls. But i am not able to save the document when i fill some data into the pdf.
or whenever i save data it says that the pdf will be saved blank.
I know that this is the reader extension issue. How to i add this reader extension feature into it.
I know that reader extension can be
1. cached
2. A document can be made reader extended using adobe live cycle process.
3. also it can be embedded while designing the pdf.
Can any body let me know how do i incorporate reader extension feature while designing and at runtime too.
I know we have taken reader extension license but dont know how to use this reader extension feature.
Regards
Sunil

Hi Sunil,
You indicate that you have a Reader Extensions license, did you also purchase Adobe LiveCycle Reader Extensions ES2? You would apply the license to your form using this server product.
You can also apply reader rights using Acrobat Standard v9 (or Acrobat Professional v8), but this has license restrictions - see EULA. Also the rights that are enabled using this route will not be as many when compared to LC Reader Extensions ES2.
I have a summary here:
http://assurehsc.ie/blog/index.php/2010/05/using-livecycle-forms-in-acrobat-and-reader/
Also have a look at the Adobe page:
http://www.adobe.com/products/livecycle/readerextensions/
Maybe talk to the Adobe sales in your region.
Good luck,
Niall

Not able to import the data in OBIEE 11g

Hi Gurus,
I had just build a new development instance from scratch.
Q1) I am getting database connnection error on the Dashboard and when i tried to update row count from physical layer it also throws me an error, as i test i tried to import but i also got an error " The connection has failed", i am able to connect thru SQL Developer. Where does OBIEE 11g look for the tnsnames.ora file.
Q2.) Where and what setting do i need to so that i can add the users in the application roles by searching them in the EM, means the LDAP users. I had gone thru most of the stuff in the web but could not get thru.
Regards,
Amit

Ans 1. This is one of the most commonly asked questions on the Forum. I hope you'd search through available posts on the Forum before creating a new discussion. In any case, this might help: http://123obi.com/2011/03/error-the-connection-has-failed-in-obiee-11g/
Ans 2. Have you set up the integration with the LDAP provider or are you looking for help with that too? These should help:
http://docs.oracle.com/cd/E21764_01/bi.1111/e10543/privileges.htm
http://www.rittmanmead.com/2012/03/obiee-11g-security-week-understanding-obiee-11g-security-application-roles-and-applic…
http://www.rittmanmead.com/2012/03/obiee-11g-security-week-managing-application-roles-and-policies-and-managing-security…

Not able to run the job with user id - is

Hello experts,
We have problem.
Every day we run the job.
( the job contians two programs called ZTIBCOPRG and J_5HJSTP )).
I would like to know why the above job is running with the user ID TIBCOADM. Because this user has German settings for the size conversion in program ZTIBCOPRG and we are having some issues.
We changed the user to TIBCOUSA and the job would not run.
We have changed the user back to TIBCOADM. It is running.
KINDLY HELP ME WITH YOUR VALUABLE inputs. YOUR HELP WILL BE HIGHLY APPRECIATED.
I have checked for both users in AGR_USERS table.
The AGR_USERS is the old user and have many roles compared to userid TIBCOUSA.
WHERE WE NEED TO SEE . IS it authorisation problem or the other user with whom unable to run the job ?
or is this the error in the program ZTIBCOPRG which is not able to do size conversion and causing some issues.
Thanks and Regards,

Hi,
after running the job with user id TIBCOUSA, it should be in cancelled state as per your comments.
you just select the cancelled job and type JDBG in command box and enter it takes you to Debug mode.
There you may get some information where it is failing.
Sudheer. A

Update-Help cmdlet not able to update the help with https protocol.

Hi all,
I am using powershell 3.0 and trying to implement this updatable feature for our custom powershell module. But I getting the below error:
PS C:\Users\scorchsvc> update-help -Module <modulename> -Force
update-help : Failed to update Help for the module(s) 'modulename' : HelpInfoURI
https://10.65.182.141/dev_releases/modulename/onlinehelp does not start with http.
At line:1 char:1
+ update-help -Module modulename-Force
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (HelpInfoUri:Uri) [Update-Help], Exception
    + FullyQualifiedErrorId : InvalidHelpInfoUriFormat,Microsoft.PowerShell.Commands.UpdateHelpCommand
I am able to get this work if I use "http". Error message clearly says that it only expects http. But in the Microsoft help topic for Update-Help cmdlet, it is mentioned that cmdlet works for both http and https both.
Here are my enteries:
•HelpInforURI entry in module manifest file is:
                    HelpInfoURI = "https://10.65.182.141/dev_releases/modulename/onlinehelp"
•HelpContentURI in HelpInfo.xml file is:
                   <HelpContentURI> https://10.65.182.141/dev_releases/modulename/onlinehelp </HelpContentURI>
I am running powershell as an administrator.
I am not behind any proxy.
Windows firewall is off.
I am mentioning it AGAIN that I am ABLE to update help for our custom module if I use http in HelpInfoURI.
I am also able to access the URI in IE with http/https.
Can any one please help?
Thanks,
Vinay Ravish

Hi vinay,
It seems the certificate issue.
Please access HelpInfoURI =
https://10.65.182.141/dev_releases/modulename/onlinehelp with https header to see if your computer could access that.
If it doesn't work, add it to your trusted site and download to see if there is related certification on that website to download and install it to trusted root certificate for test.
Karen Hu
TechNet Community Support

Urgent : Not able to import the DC from NWDI

Hi Experts
I have imported a DC from NWDI to NWDS and have done some changes mistakely but now wish to revert back or wish to start fresh.
I have deleted all my DC;s locally. I have deleted the activities in Development configuration prospective -> Open activities
I have Deleted all DC under Local DC( which I synced with Inactive DC;s) Portal view (in Development Configuration perspective) using option remove from client.
But Now when I am trying to create the DC again from track to my local development it is giving error.
com.sap.tc.devconf.SyncException: Cannot unsync component. The component itself is checked out for create.
at com.sap.tc.devconf.impl.DCProxy.doUnsyncSources(DCProxy.java:4175)
at com.sap.tc.devconf.impl.DCProxy.unsync(DCProxy.java:1322)
at com.sap.tc.devconf.impl.DCProxy.unsync(DCProxy.java:1280)
at com.sap.tc.devconf.impl.DCProxy._resync(DCProxy.java:1202)
at com.sap.tc.devconf.impl.DCProxy.resync(DCProxy.java:1177)
at com.sap.tc.devconf.impl.DCProxy.syncAsSources(DCProxy.java:732)
at com.sap.tc.devconf.impl.DevelopmentConfiguration.syncAsSources(DevelopmentConfiguration.java:4973)
at com.sap.tc.devconf.impl.DevelopmentComponentNode.syncAsSources(DevelopmentComponentNode.java:955)
at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.syncSelectedDCs(DcCreateProjectAction.java:443)
at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.execute(DcCreateProjectAction.java:237)
at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
Also when DC under Local DC's view which i am trying to remove from client but giving error.
<B>Some files have been edited/changed.
Look over your open activities. <B>
Although there are no open activities for any DC is there but still not allowing me to delete.

Hi Shobhit,
Did it actually allow you to delete the activities without revert??
As per my understanding, its not allowing you to either 'Create Project' or 'Remove from Client'.
Deleting the project from WD perspective does not remove it from DTR (Remove from client).
Try 'Sync' from NWDI track. Probably will give you an error but no harm in trying.
Is the 'Create Project' option enabled? If it is, try that.
And delete all the contents of this project from your file system (Workspace folder in your hard disk). Once you delete, restart the NWDS.
Let us know if any of this works.

Not able to update the partner with a new partner during change order ?

Hi Experts,
I want to update a partner which is present in a sales order with a new partner. When i create a new order, i ll give partner function ship-to-party and partner no 1 for this partner function. And from a fucntion module, i want to change this partner no 1 to partner no 2 but when i try to pass the required values to crm_order_maitain, it is adding a new line in partner tab as same partner function and partner no 2 but my requirement is to update from 1 to 2. How to do this??
Please help me in this regard.
Thanks a lot in advance!!
Regards,
Lakshman.

Hi,
I have similar requirement to redetermin all the partner functions when the sold to pary is replaced with another one while creating complaint.
Can you share how you managed to solve yours.
Thanks
Kumar

Not able to update the project using 'BAPI_PROJECT_MAINTAIN'.

I want to create a project , with reference to an already existing project.
I am using 'BAPI_PROJECT_GETINFO' to get the data of the existing project.
The bapi gives the following:
1)     e_project_definition.
2)     e_wbs_element_table.
3)     e_wbs_hierarchie_table
I am passing the u2018e_project_definitionu2019 to 'BAPI_PROJECTDEF_CREATE' to create project.The project is created successfully.
But I am not able to update the project with u2018e_wbs_element_tableu2019
and u2018e_wbs_hierarchie_tableu2019. I am using 'BAPI_PROJECT_MAINTAIN' to update the project.
The program is not giving an error, but it is also not updating the E_WBS_ELEMENT_TABLE and E_WBS_HIERARCHIE_TABLE.
I am attaching the code below.
*& Report ZTEST_PC.
DATA: project_definition   TYPE bapipr-project_definition,
      with_activities      TYPE bapipr-with_activities,
      with_milestones      TYPE bapipr-with_milestones,
      with_subtree         TYPE bapipr-with_subtree,
      e_project_definition TYPE bapi_project_definition_ex,
      return               TYPE bapireturn1.
DATA: i_wbs_element_table         TYPE TABLE OF     bapi_wbs_elements,
      e_wbs_element_table         TYPE TABLE OF     bapi_wbs_element_exp,
      e_wbs_milestone_table   TYPE TABLE OF bapi_wbs_milestone_exp,
      e_wbs_hierarchie_table TYPE TABLE OF bapi_wbs_hierarchie,
      e_activity_table        TYPE TABLE OF bapi_network_activity_exp,
      e_message_table         TYPE TABLE OF bapi_meth_message.
DATA: wa_wbs_element_table    TYPE      bapi_wbs_element_exp,
      wa_wbs_hierarchie_table TYPE bapi_wbs_hierarchie.
DATA: l_new_proj_no TYPE prpss-posid.
DATA: l_project_definition        TYPE bapi_project_definition.
DATA: l_project_definition_upd    TYPE bapi_project_definition_up.
DATA: l_project_definition_stru   TYPE bapi_project_definition.
DATA :l_pspnr      TYPE ps_intnr,
      l_pspid      TYPE ps_pspid,
      l_pro_def(9) TYPE c.
DATA :l_proj TYPE proj.
DATA :l_len TYPE i VALUE '0'.
DATA: lt_dd03l TYPE TABLE OF dd03l,
      ls_dd03l TYPE dd03l.
DATA: fieldname(50), fieldname1(50) TYPE c.
DATA: p_ddic_name(40), struc(40), fun_struc(50) TYPE c.
FIELD-SYMBOLS: <struc>, <c>, <sc>, <def_field> TYPE any.
DATA : i_method_project    TYPE TABLE OF bapi_method_project,
       wa_method_project   TYPE bapi_method_project.
DATA : l_index TYPE bapi_method_project-refnumber.
DATA : it_wbs_element_table         TYPE TABLE OF bapi_wbs_element,
       it_wbs_hierarchie_table      TYPE TABLE OF bapi_wbs_hierarchie.
DATA : wl_wbs_element_table         TYPE bapi_wbs_element,
       wl_wbs_hierarchie_table      TYPE bapi_wbs_hierarchie.
DATA : l_wbs_element_table_update   TYPE bapi_wbs_element_update.
DATA : i_wbs_element_table_update   TYPE TABLE OF bapi_wbs_element_update.
Get the project info of the Project 'C01.10995'
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
    input = 'C01.10995'
IMPORTING
    output = project_definition.
CALL FUNCTION 'BAPI_PROJECT_GETINFO'
EXPORTING
    project_definition     = project_definition
IMPORTING
    e_project_definition   = e_project_definition
    return                 = return
TABLES
    i_wbs_element_table    = i_wbs_element_table
    e_wbs_element_table    = e_wbs_element_table
    e_wbs_milestone_table = e_wbs_milestone_table
    e_wbs_hierarchie_table = e_wbs_hierarchie_table
    e_activity_table       = e_activity_table
    e_message_table        = e_message_table.
Automate the process the process to get the next number for the func module 'CN_SUCHE_FREIE_NUMMER'.
CLEAR : l_pspnr, l_pspnr, l_pspid, l_pro_def.
SELECT MAX( pspnr ) FROM proj INTO l_pspnr.
SELECT SINGLE * FROM proj INTO l_proj WHERE pspnr EQ l_pspnr.
l_pspid = l_proj-pspid.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
EXPORTING
    input = l_pspid
IMPORTING
    output = l_pspid.
l_pro_def = l_pspid+4(5) + 1.
CONDENSE l_pro_def.
CONCATENATE 'C01.' l_pro_def INTO l_pspid .
function module to generate the nect free number between the given range.
CALL FUNCTION 'CN_SUCHE_FREIE_NUMMER'
EXPORTING
    search_imp = '2'
    prps_s_imp = l_pspid
    prps_e_imp = 'C01.29999'
    no_dialog = 'X'
IMPORTING
    prps_exp   = l_new_proj_no.
IF sy-subrc <> 0.
EXIT.
ENDIF.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION'.
Get the New Project Number.
MOVE-CORRESPONDING e_project_definition TO l_project_definition.
l_project_definition-project_definition = l_project_definition-project_definition+0(3).
l_new_proj_no = l_new_proj_no+4(5).
CONCATENATE l_project_definition-project_definition '.' l_new_proj_no INTO l_project_definition-project_definition.
TRANSLATE l_project_definition-project_definition TO UPPER CASE.
MOVE-CORRESPONDING l_project_definition TO l_project_definition_stru.
Create the New project with the New project Number.
CALL FUNCTION 'BAPI_PROJECTDEF_CREATE'
EXPORTING
    project_definition_stru = l_project_definition_stru.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = ' '.
Populate internal table i_method_project for the bapi_project_maintain func module.
CLEAR : wa_wbs_element_table,wl_wbs_element_table,wa_wbs_hierarchie_table,
        wl_wbs_hierarchie_table, it_wbs_element_table, it_wbs_hierarchie_table.
CLEAR : wa_method_project, i_method_project, l_index .
l_index = 0.
LOOP AT e_wbs_element_table INTO wa_wbs_element_table.
MOVE-CORRESPONDING wa_wbs_element_table TO wl_wbs_element_table .
APPEND wl_wbs_element_table TO it_wbs_element_table .
wa_method_project-objecttype = 'WBS_ELEMENT'.
wa_method_project-method     = 'CREATE'.
wa_method_project-objectkey = wa_wbs_element_table-wbs_element.
l_len = strlen( wa_wbs_element_table-wbs_element ).
Setting Levels as reference number.
CASE l_len.
    WHEN '9'.
      l_index = 1.
    WHEN '12'.
      l_index = 2.
    WHEN '15'.
      l_index = 3.
    WHEN '18'.
      l_index = 4.
ENDCASE.
wa_method_project-refnumber = l_index .
TRANSLATE wa_method_project-objectkey TO UPPER CASE.
APPEND wa_method_project TO i_method_project.
CLEAR :wa_method_project, l_index.
ENDLOOP.
l_index = l_index + 1.
wa_method_project-refnumber = ' '. "l_index .
wa_method_project-objecttype = ' '. "'WBS_ELEMENT'.
wa_method_project-method     = 'SAVE'.
wa_method_project-objectkey = ' '.
APPEND wa_method_project TO i_method_project.
CLEAR wa_method_project.
LOOP AT e_wbs_hierarchie_table INTO wa_wbs_hierarchie_table.
MOVE-CORRESPONDING wa_wbs_hierarchie_table TO wl_wbs_hierarchie_table.
APPEND wl_wbs_hierarchie_table TO it_wbs_hierarchie_table.
ENDLOOP.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION' respectively.
CLEAR : l_project_definition_upd.
p_ddic_name = 'BAPI_PROJECT_DEFINITION_UP'.
struc       = 'l_project_definition_upd'.
fun_struc   = 'E_PROJECT_DEFINITION'.
TRANSLATE: p_ddic_name TO UPPER CASE,
           struc       TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
    <sc> = 'X'.
ENDIF.
ENDLOOP.
Update the fields of 'l_wbs_element_table_update' as 'X' for the fields which has values in 'e_wbs_element_table' respectively.
READ TABLE e_wbs_element_table INTO wa_wbs_element_table INDEX '1'.
CLEAR : l_wbs_element_table_update, fieldname1, p_ddic_name, struc, fun_struc .
p_ddic_name = 'BAPI_WBS_ELEMENT_UPDATE'.
struc       = 'l_wbs_element_table_update'.
fun_struc   = 'WA_WBS_ELEMENT_TABLE'.
TRANSLATE: p_ddic_name TO UPPER CASE,
           struc       TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
    <sc> = 'X'.
ENDIF.
ENDLOOP.
Append the value of l_wbs_element_table_update TO the table i_wbs_element_table_update for Bapi_project_maintain.
CLEAR i_wbs_element_table_update.
APPEND l_wbs_element_table_update TO i_wbs_element_table_update.
CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
EXPORTING
    i_project_definition       = l_project_definition
    i_project_definition_upd   = l_project_definition_upd
TABLES
    i_method_project           = i_method_project
    i_wbs_element_table_update = i_wbs_element_table_update
    i_wbs_element_table        = it_wbs_element_table.
   i_wbs_hierarchie_table     = it_wbs_hierarchie_table.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = ' '.
Please help me to solve the issue.

I am not sure why it is not working?? Try for any other alternate function modules.
But i see one issue with your coding, always check the return table message type and use commit work, instead of sy-subrc check. This fails for BAPI's

Not able to import business system in Integration Directory

Dear all,
Currently i involved in XI system copy. As per the standard documetn i have finsihed the initial activites like EXPORT and import of abap and java files is succedded.
Now in the post instalaltion activites.
I have changed the exchange profile parameter
SLD connection.
And other post installation activites succesfully.
But I am not able to import the business system in Integration director. It throws an error by mentioning.
*Access to object list of type business system using the internalEOA service business system accessor failed *
Here we are maintaing a central SLD and hence i created the service users with specific roles.
SLDcheck is working fine and it dispalying the businees system as well.
I confirmed that the user and password are same in XI and SLD system,
But in SLD I am not able to see the domain under web as Exchagne Infrastructure alonng with the componets. I have tried to registerd the same using the note 761476 but in vain. After the changes i restarted the machin and checked the domain status in SLD technical system under exchagne Inffrastructure its not working.
Is this the problem or am i missing out somewhere?
FYI: The users are not locked.
Kindly suggest me and it will be greatful if i get immediate reply.
Thanks and regards
Vijay kumar G

Hi Vijay,
It looks like the problem is with the SLD.
Did you delete the SAP ABAP and Java technical system and business systems and recreate them in the central SLD? If this was the case, then you may not be able to import them into your integration directory anymore, as the GUID of the new technical systems and business systems are not the same with the previous one.
Why not tried to recopy the SLD again, and this time do not change the technical and business systems. If the reregistration of these systems are not avoidable, then you will have to open up the copied IR for configuration.
Regards,
Lim...

Canon HF200 and Final Cut Express 4 - not able to import movie files

Hello,
I have a Canon HF200. I have a 16 GB Duracell "pro photo" flash card. When I first connected my camera to my computer and clicked on "log and transfer" all of the movie clips on my card showed up in FCE 4. I did not import them at this time, however.
Now when I connect the camera, only newer videos taken with the camera show up as importable in FCE. Essentially, while the older videos remain on the card, I cannot access them and import them into FCE.
I am not able to import the files, which are saved as .CPI and .MTS files by simply dragging or using the log and transfer option.
If anyone can help me with this problem and tell me how I can retrieve the movie files I would really appreciate it.
Thanks a lot.

Do you own a card reader? Use that instead of the camera to transfer your files. If not, try using disc utility (or toast if you have it) to duplicate the memory card to a disc image (you can burn it to dvd if you want a back up of the original files) and then use the disc image to log and transfer.

** Not able to import IDoc from SAP ECC system

Hi Friends,
I am not able to import the IDoc from SAP ECC system in IR. I have checked that, hostname, client, server no. everthing is correct. I checked in SLD also. Host Name is correct.
While import (after giving the user name and password), I am getting the following error.
Problems to reach R3 System
What could be the probelm ?
Kindly help me friends.
Thanking you.
Kind regards,
Jegathees P.

Hi,
Just counter check following step
1. Go to SWCV definition tab select radio button for Import of RFC....
2. In Connection Data for Import from SAP System maintain correct System and correct Client.
3. Make sure you maitain ECC system in Central SLD.
4. In Import Screen check at the top of the screen have SAP System, is that system from where you want to import the IDOC.
With Regards
Sunil

SAP B1 was not able to import layout/report.

Good day!...
What could be the possible reason why the layout/reports cannot import successfuly in report and layout import wizard?
I tried to import new layout/report (crystal report) using report and layout import wizard but after the procedure has been done, the layout/report was not imported successfuly. There's no problem if I will overwrite the existing report but when it comes to new report, this problem exist.
Thanks.
RD

Hi!
What connection you are using in the CR. Is that ODBC or OLEDB.
OLEDB connection would be preferable.
Can you paste your query what you have used in the CR.
Do you able to browse and choose the CR file in the Report and Layout manager.
Did the file is in your local system.
Please in which step you are not able to import the file, what is the error it showing on the screen

Not able to import the article with sidecar.xml

Similar Messages

Maybe you are looking for