Not able to include infopackage in process chain creation

Hi Gurus,
I'm creating a process chain. while including the infopackage its not allowing me to select the existing infopackage.
i'm geitting the message "no data selected".
First we had checked the maintain process types - if the loading process type is maintained or not, we could not find that particular process there we had created a new entry by taking the values from the table "RSPROCESSTYPES".
Now its show in the maintain process types in RSPC tcode.
But still could not add the infopackage.
any one please throw light on this.
regards
KP
Edited by: KP on Sep 5, 2009 2:55 PM

Hi,
If your infopackage is active .. then you should be able to add in the process chain. Please check all the objects if they are active or not. secondly Execute Infopackage is the standard process type available - you dont need to activate the same. Also one rough estimate is to check with your authorizations.
you can also refer to below link.
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
hope this helps.
Regards
Raj

Similar Messages

Adding infopackage in Process chain

Hi All,
         i am creating processing chain and i am trying to add a infopackage to that.
         but when i press F4 or small square box it is saying there are no infopackage but i have some infopackages created in Datasource.
      while i tried to add DTP it was successful but not able to add infopackages to process chain,
      the process chain is still unassigned is this any thing to deal with this.
      Please hlep me out and i have gone through the blogs in sdn for this but i was not able to figure it out.
Thanks in advance..
Srinivas.

Hi,
if you are displaying in tree format, then you may not be able to find the process chain.(
I do not know the reason, but i had the same issue in past, as i remember. but i solved it)
Please switch to network display in process chain and try again.
In process chain, go to infosource and with crtrl+f searchh the technical name of the infopackage.
Let me know if it helps
Regards
Derya
Edited by: Derya Akcakaya on Apr 16, 2008 10:50 PM

Infopackage in process chain is not scheduling

Hi All
One of infopackage in process chain is not scheduling and showing error message like "<b>Attributes are not yet maintained
Entire chain now has status 'R'</b>
what do we mean about this
can anyone will let me know in detail and how to correct this?
Regards
balaji

Hi balaji,
how big is your process chain ? I got a similar problem when I build a metachain with a lot of processes in the chain (more than 60). In this case, the error message is deceiving. If your process chain has similar numbers of processes, check OSS 942804 (Jobcount handling).
Kind regards,
Jürgen

Logical system Infopackage in process chain

Dear All,
I want to schedule a logical system delta infopackage in process chain I have input this package in chain but while activating it gives error "InfoPackage ZPAK_44MTIRL52E5IJXMQVL1BXFCWI is generated; NOT able to be used as loading variant" can any body help me how to resolve this issue.
Abhijit

Hi,
I think this package is created automatically while selecting update data into data targets from the context menu of the ods. This kind of packages cannot be used in chains. Goto rsa1->infosources. Select your 8<odsname> infosource and create a delta package manually. Put that package into the chain. That should work.
kind regards
Siggi

Explain: how to include Infospoke in Process Chain where destination is DB

Explain: how to include Infospoke in Process Chain where destination is local machine database [NOT Flatfile]

Hi vijay,
First you create an Infospoke with destination as a DB table in your local BI or BW Machine. Now add this infospoke by going through below steps.
1. Call up the process chain maintenance. Choose This graphic is explained in the accompanying text Process Chain Maintenance from the Administrator Workbench toolbar. The Process Chain Maintenance Planning View screen appears.
2. In the left-hand screen area of the required This graphic is explained in the accompanying text display component, navigate to the process chain in which you want to insert your InfoSpoke. Double-click to select it. The system displays the process chain plan view in the right-hand side of the screen.
If no suitable process chain is available, you need to create a new process chain. You can find additional information under Creating a Process Chain.
3. To insert a process for extraction by means of an InfoSpoke, choose This graphic is explained in the accompanying text Process Types in the left-hand area of the screen. The system now displays the process categories available.
4.In the process category Loading Process and Post Processing, choose the application process type This graphic is explained in the accompanying text Data Export into External Systems.
5.Insert the Data Export into External Systems application type with Drag&Drop into the process chain. The dialog box for inserting a process variant appears.
6.In the Process Variant field, enter the name of the InfoSpoke that you want to include in the process chain, or select it by means of the input help.
Once You have added the infospoke you have to write a program which will fetch the database table that you filled and transfer the data fetched to other legacy system with the help of XI System
For more information on how to infospoke on 3rd party pls find the link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
Hope this help
Harish

Finding out the OH that are included in the process chain

Hi,
Please let me know how to find out the list of OH which are included in the process chain and which are not included.
Is there any way where i can find out these OH are included in the Process chain.
Regards,
Prem

Hi,
http://help.sap.com/saphelp_NW70EHP1core/helpdata/en/43/7a69d9f3897103e10000000a1553f7/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/01d3a090-0201-0010-9783-bc33ab690e70?QuickLink=index&overridelayout=true

I want to know Cube,Ods,Multiproviders,infopackage groups,process chains

Hi all,
1.how to make techinical specifications Cube,Ods,Multiproviders,infopackage groups,process chains.
2.how to decide the size of the cube.
3.what is the default size& what is the max size & In the case of ods.
4.performance wise which is best multiprovider or cube.
5.why cube is best (performance wise) for cube over ods.
6.What is max no of chars & keyfigures can insert in ods.
7.Is sid concept exists for ods.if yes when they generate.
Thanks
cheta.

Hi
1.From functional specification requirements,find out the datasources by using business content check(offline) or using Metadata repository(online), u need to have TREX installed in ur system.Do the GAP Analysis and note down the objects which are not in business content and create Z objects(Datasources,ODS or Infobjects,Cubes). Draw the bubble diagram and derrive ER diagram from it and finally do logical information model(cube model) and decide what u need in data flow.
2.You have a quick sizer in market place which can help you to decide the sizing of BI project.Take care of trade-off's between line item dimensions and normal dimension which have large impact on ur sizing.
3.There is no such default sizing,depends on ur reporting requirements whether u need detailed reporting or snap shot reporting.
4.There is no trade-off's between multiprovider and Cube regarding performance.From performance point of view we have to consider other factors such as aggregates,Indexing,Partitioning etc..
6.The Max number of Keyfields are 16 and data fields are 749.
7.Yes SID's are created for ODS when you check the flag for BEX Reporting.
Thanks
Chandru

Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
Thanks

You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars

Infopackage in process chain taking long time to run

HI Experts,
One of the element (Infopackage) in process chain(Daily process chain) is taking much longer time(6 hr and still runing) as generally it takes 15-20 mins to complete and the status is in yellow and still running in process monitor without giving any clear picture of error. Manually we are making the staus red and we are updating from PSA and this time it is getting completed in time as specified.
Flow from PSA to datatarget(DSO) in series
For last one week we are facing same issue and i would like to mention that we don't have access to SM37,SM12 to look the logs
and any locks.
without this i need to investigate what is the root cause for the same.
with regards,
murali

Hi,
please find the job log.
Date
Time
Message
MsgID/No./Ty
13.12.2010
21:45:30
Job started
00
516
S
13.12.2010
21:45:30
Step 001 started (program SBIE0001, variant &0000000109368, user ID RFCUSER)
00
550
S
13.12.2010
21:45:30
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
R3
413
S
13.12.2010
21:45:30
DATASOURCE = 2LIS_17_I3HDR
R3
299
S
13.12.2010
21:45:30
RLOGSYS    = PBACLNT200
R3
299
S
13.12.2010
21:45:30
REQUNR     = REQU_D9GSSV08BTS93Z6Y7XWP1ZEUJ
R3
299
S
13.12.2010
21:45:30
UPDMODE    = D
R3
299
S
13.12.2010
21:45:30
LANGUAGES = *
R3
299
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
         Current Values for Selected Profile Parameters               *
R8
049
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:30
abap/heap_area_nondia......... 0                                       *
R8
050
S
13.12.2010
21:45:30
abap/heap_area_total.......... 25500319744                             *
R8
050
S
13.12.2010
21:45:30
abap/heaplimit................ 40000000                                *
R8
050
S
13.12.2010
21:45:30
zcsa/installed_languages...... ED                                      *
R8
050
S
13.12.2010
21:45:30
zcsa/system_language.......... E                                       *
R8
050
S
13.12.2010
21:45:30
ztta/max_memreq_MB............ 2047                                    *
R8
050
S
13.12.2010
21:45:30
ztta/roll_area................ 3000320                                 *
R8
050
S
13.12.2010
21:45:30
ztta/roll_extension........... 2000000000                              *
R8
050
S
13.12.2010
21:45:30
R8
048
S
13.12.2010
21:45:31
70 LUWs confirmed and 70 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
RSQU
036
S
13.12.2010
21:45:33
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 9,895 records
R3
407
S
13.12.2010
21:45:33
Result of customer enhancement: 9,895 records
R3
408
S
13.12.2010
21:45:33
PSA=0 USING & STARTING SAPI SCHEDULER
R3
299
S
13.12.2010
21:45:33
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
R3
409
S
13.12.2010
21:45:34
IDOC: Info IDoc 2, IDoc No. 5136702, Duration 00:00:00
R3
088
S
13.12.2010
21:45:34
IDoc: Start = 13.12.2010 21:45:30, End = 13.12.2010 21:45:30
R3
089
S
13.12.2010
21:45:35
Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks)
R3
413
S
13.12.2010
21:45:35
Altogether, 0 records were filtered out through selection conditions
RSQU
037
S
13.12.2010
21:45:35
IDOC: Info IDoc 3, IDoc No. 5136703, Duration 00:00:00
R3
088
S
13.12.2010
21:45:35
IDoc: Start = 13.12.2010 21:45:35, End = 13.12.2010 21:45:35
R3
089
S
13.12.2010
21:55:37
tRFC: Data Package = 1, TID = 0AF0842B00C84D0694000F00, Duration = 00:10:03, ARFCSTATE = SYSFAIL
R3
038
S
13.12.2010
21:55:37
tRFC: Start = 13.12.2010 21:45:34, End = 13.12.2010 21:55:37
R3
039
S
13.12.2010
21:55:37
Synchronized transmission of info IDoc 4 (0 parallel tasks)
R3
414
S
13.12.2010
21:55:37
IDOC: Info IDoc 4, IDoc No. 5136717, Duration 00:00:00
R3
088
S
13.12.2010
21:55:37
IDoc: Start = 13.12.2010 21:55:37, End = 13.12.2010 21:55:37
R3
089
S
13.12.2010
21:55:37
Job finished
00
517
S

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy

Iphoto allows you to share photos by selecting them and then emailing as an attachment. I'm not able to do that now, curser isn't appearing in the email address box when I attempt to address my email. Photos are attaching but not able to include an addr

iphoto allows you to share photos by selecting them and then emailing as an attachment. I'm not able to do that now, curser isn't appearing in the email address box when I attempt to address my email. Photos are attaching but not able to include an address.

Windows Phone 8.1 is so full of surprises and opens the Windows Phone faithful up to a new world of apps.
Video editors and
file managers are just some of the new app categories possible thanks to Windows Phone 8.1. We’ve seen an official video editing app from Microsoft already, but today we finally get Files – the official file manager for Windows Phone.

How to create infopackage groups & Process chains & what is the difference

Hi gurus,
please help me to create infopackage groups & Process chains & what is the difference.
please explain any realtime scenerios.
when will we choose infopackage groups & process chains
and what is the difference betweeen these two.
Thanks & Regards,
BWcheta

Cheta,
You can create the IPG with the selction of all infopackages in RSA1-Modelling Area to automate those loads automatically. That means it will trigger only those IP's which have been pooled up in that IGP...
Where as Process chain is also a automated process where you can have different process types which can be used during the load and after the load has been done.. For example in ODS once after the data has been loaded if you want to activate the data then in PC youo can insert the process type for that, but in case of IGP it will only execute your IP.
Hope it helps...
******Assign Points*******
Thanks,
Gattu.

Not able to include the system to its transport domain

Hello,
We are not able to include the system to its transport domain. We are getting the same error:
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Except.                CX_SY_OPEN_SQL_DB
Date and Time          01.10.2010 11:27:35
Please advice
Sankar

Hi Shyam,
This is actually a program error and the same can be rectified by implementing the [SAP NOTE 1412609 - DUPREQ when configuring the transport domain|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1412609] using the tcode SNOTE.
This will resolve ur issue.
Regards,
Varadharajan M

Error in process chain creation : SET SCREEN not allowed in subscreens

Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.

Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.

What are the practical differences betweens infopackages and process chains

Hi,
what are the practical differences betweens infopackages and process chains.
Thanks,
cheta.

Hello BW,
Hope the following links will give u a clear idea about process chains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
regards,
Muralidhar Prasad.C

Not able to include infopackage in process chain creation

Similar Messages

Maybe you are looking for