Not able to install IIS on Windows Server 2012

I am unable to install IIS on Windows Server 2012. I get the error as shown in the below screenshot. Error code is 0x800f0922. I did RestoreHealth but that has not helped. Any help will be appreciated.

Hi Yogesh,
Just last week was installing IIS on W12R2 server and got stuck and found easy way of installing this as follow.
when you start installing IIS and at the last step as i marked on red square confirmation. there you find
export configuration settings..go to and export it to C drive and open Powershell by right clicking as open as administrator and run this from Powershell and it will install successfully.
Please let me know if you are facing any issue, since this way it has to work.
OR if you it already worked let me know or mark as correct.
Regards
Raj Navalgund
ADS/DNS/DHCP/RIS/GROUP POLICY/PowerShell/VMware/Esxi/Storage.

Similar Messages

  • Not able to install sccm agent in sccm 2012 servers after cu3 update

    not able to install sccm agent in sccm 2012 servers after cu3 update
    MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
    The error code is 80041002 ,below URl specify fix to uninstall Management point ,but in sccm 2012 secondary site canot unintall management point  ,please help to install agent in config manager servers
    https://blogs.technet.com/b/configurationmgr/archive/2013/11/25/hotfix-quot-error-25150-setup-was-unable-to-register-the-ccm-service-hostingconfiguration-endpoint-quot-when-you-try-to-install-the-client-agent-in-configuration-manager.aspx
    ankith

    Excellent Article!!!!!! Pls check here, Follow the same steps
    http://eskonr.com/2013/09/sccm-configmgr-2012-sp1-cu3-installationcollections-upgrade-clients/
    This too
    http://it.peikkoluola.net/2013/11/18/update-sccm-2012-to-sp1-cu3/
    Thanks, Prabha G

  • Not able to install Intellisync on Windows Mobile 6.1

    Hi
    We have got GMS 3.0.1 running on Linux and GW 8.0.2.
    On my HTC Touch Diamond (Windows Mobile 6.1) I am not able to install Intellisync. I'm sending the Intellisync_setup (Microsoft Smartphone OS-Devices) via SMS. On my mobile device I tried either opening the link directly (default opens with Opera Mobile) or pasting it into Internet Explorer. In Opera is shown a message that the certificate of the server does not fit to the hostname. But certificate and hostname are exactly the same. It is a self-issued certificate by the way. I click on the accept button and select "Windows Mobile Smartpone" from the list. Then I select install on device. Installation starts... In the middle of "downloading package ..." I get: "Install Error: Connection problem. Please try again later, or contact your system administrator." After confirming with OK the installation window closes. I reboot the mobile device and there is the Intellisync Install window where I can enter server and credentials. After entering the servername and credentials I get the message: "A secure connection could not be established. Check your connection settings, or contact your system administrator" --> Ok --> "Authentication failed. Please try again." --> OK.
    If I enter the same servername with https and same credentials over Opera or Internet Explorer I can access the GMS without any problems.
    Have you got any ideas?
    Thank you in advance for your help
    pixel73

    Originally Posted by pixel73
    Thanks for your suggestions.
    I tried that already. But the installation process can't be finished. I am always stuck at the "Intellisync Install" window where I enter the server name and my credentials. After clicking on the connect button I always get the following three messages:
    "A secure connection could not be established. Check your connection settings, or contact your system administrator."
    "Connection problem. Please try again later, or contact your system administrator."
    "Authentication failed. Please try again."
    Now on GMS I changed the following options and rebooted afterwards:
    "Enforce SSLv3 connection and a minimum 64-bit key" --> to NO
    "Server Key Length" --> to 1'024
    I again performed a hard reset on my HTC.
    None of all that helped.
    Could it be a problem with the mobile services provider?
    I'm tempted to say to recheck the certificate you are using. Has this been working before?
    Could be the CN on the certificate does not have the full dn (e.g. server.domain.com)?

  • Not able to install SAP Web Application Server -6.40

    iam running on SAP NETWEAVER Studio 6.0.21 in Windows XP  operating System , not able to install  SAP Web Apllication Software -6.40 .
    iam not sure what to choose(while Installation) central system or distributed System ,i have tried in either way but
    still not able to install the software .
    If i go with Sap System Installtion>Java System >Distributed system>Java Central Instance installation  ,it throws me getJavaHome was executed with status error ......
    then ,
    what is the version of Sap Web Application Server to be installed if my system runs on
    SAP NETWEAVER Studio 6.0.21 or 6.0.11
    cheers
    Sundar

    Hello,
    What do you want to do exactly?
    You speak about SAP Netweaver Studio? I suppose you mean Netweaver Developer Studio?
    Do you want to install a complete SAP System on your windows XP?? or only the Java part?
    Thanks to give us more info
    Olivier

  • Not Able to install Weblogic RFID Edge Server in Solaris10

    I have downloaded Bin file for Weblogic RFID Edge Server for solaris10. When i am trying to install it was telling Cannot Execute. I gave all permissions for that file. can anybody hele me to resolve this issue.

    Hi,
    I am not able to install Bea Weblogic RFID
    Edge Server. I gave all permissions to that file.
    $ ./rfid_edge220_solaris32.bin
    ./rfid_edge220_solaris32.bin: cannot execute
    Could you please tell me the solution to resolve this
    issueWhat is the output of " file fid_edge220_solaris32.bin".

  • ProClarity 6.3 PAS install fails on Windows Server 2012

    We are trying to install PAS 6.3 on Windows Server 2012 and the install fails with the following error
    The following requirements are missing:
    Windows Server 2003 SP1
    We have successfully installed on Windows Server 2008 R2, so it really isn't a Windows Server 2003 SP1 issue.
    Has anyone successfully installed on Windows Server 2012?  Is there a way to force the installer not to check for the OS?
    Thanks.
    Kevin

    I have a PAS server running in Windows 2012, by doing exactly the same pre-requisites  that you do in Windows 2008 r2 (iis, Framework, SQL ADO 2005 / 2008). With the Windows Server 2003 SP1 message you can avoid it by doing a really simple thing that
    is right click the setup file --> properties, and head to the "Compatibility Tab" and run it with compatibility mode Windows 7, also run it with Admin permissions. This let you pass by the message and let you install the product.  Remember, after  the
    installation, you need to check all the IIS config, folder permissions, that you did in Windows 2008 x64  installation. Also, the App pool needs to work with .NET 2.0 not 4.0. 
    Good luck! 
    Byron
    BNavas

  • CF11 install problem on WIndows server 2012 R2

    We have a new install windows server 2012 R2 with a new install CF11 standard installed on C drive. Everything is 64bit. The CF administrator site and login works fine.  cfm files will not serve up in the default directory, but IIS shows htm files fine.  CF administrator runs fine.
    Web Server Config tool will only show "None" in the IIS Web Site box.  The usual CGI, APS, etc have been installed on IIS.  In fact IIS and CF11 have been reinstalled.  wsconfig.exe manual run shows no errors.
    The problem is that any call to a cfm template results in an error (html pages serve fine):
    HTTP Error 500.0 - Internal Server Error
    The page cannot be displayed because an internal server error has occurred.
    Detailed Error Information:
    Module       IsapiModule
    Notification       ExecuteRequestHandler
    Handler       cfmHandler
    Error Code       0x8007007f
    Requested URL       http://localhost:80/default.cfm
    Physical Path       C:\inetpub\wwwroot\default.cfm
    Can anybody give any suggestions for troubleshooting?  No logs seem to show any information that helps.

    Fixed the problem......... it is not a CF problem alone but and mostly an IIS problem ....
    1) remove IIS completely...... including the inetpub directory..... remove .NET Extensibility from server manager under Application Development if inetpub in use error is present... inetpub has to be deleted.
    2) reboot
    3) reinstall IIS and enable all the usual stuff, ie, CGI, ISAPI, .NET, ASP , WebSocket Protocol, etc under Application Development
    4) restart IIS and CF
    5) Set Web Server Config to  "All"
    60 restart IIS and CF
    The trick to completely reinstall IIS and that is only done if you can delete the inetpub folder under root drive.

  • DirectAccess Client not connecting without error code on Windows Server 2012 R2 and Windows 8.1

    Hello,
    we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
    Errors:
    There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
    >Get-DAConnectionStatus
    Status    : Error
    Substatus : CouldNotContactDirectAccessServer
    >Get-NetIPHttpsState
    LastErrorCode   : 0x0
    InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
    Setup:
    Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
    successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
    been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
    The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
    setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
    Diagnosis:
    So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
    access the NLS-Website located on the server, which worked fine).
    Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
    Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
    on the URL returning HTTP-200 and no content.
    I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
    Regards
    Matthias

    Hi,
    In addition, have you disabled the DA client components on the DA client? If no, please also check
    the settings on the Name Resolution Policy Table.
    More information:
    DirectAccess
    Client Location Awareness – NRPT Name Resolution
    In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
    registry or corrupt drivers. For more detailed information, please refer to the link below:
    Error 1225 - Error Code 0x4C9
    Note:
    Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best regards,
    Susie

  • Error: Could not open key: UNKNOWN\Components in Windows Server 2012 R2

    Hi,
    I am trying to install an MSI where i am getting the below error
     ..\MSI\CHIP_MAPS.msi: Could not open key: UNKNOWN\Components\F5C1BE1268054884D9261E148691452A\34DBF3FA04D67B443A8EE069E02E418B.   Verify that you have sufficient access to that key, or contact your support personnel.
    I was able to fix this in Windows Server 2008 R2 . With ine instructions provided here 
    http://www.okino.com/conv/changing_windows_registry_permissions.htm
    However In Windows Server 2012 or R2 i followed the below steps.
    1. Regedit
    2.
    Navigate to the following parent container:HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components
    3. Replace all child object permissions with inheritable permissions from this object in permissions tab
    4. I don't find the owner tab
    Please help me asap
    Thanks
    Sreeram

     then add the user name as new owner
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Getting error 'proc_createNewAppSiteDomainIds' when I try to install SharePoint on Windows Server 2012

    I have a Windows Server 2012 setup with SQL 2012 SP1 installed.  I have tried to install Sharepoint Foundation 2013 and also full blown Sharepoint version...but during the wizard setup I always get 'Cannot find the object 'proc_createNewAppSiteDomainIds',
    because it does not exist or you do not have permission.
    The install created my db in sql 'team1p-vm' but that is it.
    What am I missing?
    During the install I have tried both Complete and Stand-alone as the Server Type.
    When it gets to the product configuration wizard I use:
    Create a new server farm
    I enter my database server name: team1p-vm
    Database name: SharePoint_Config
    I enter my db access account
    I enter a farm security settings passphrase
    I use 17012 as my port number, select NTLM
    I see my configuration settings...
    Click Next and I get the error on task 3 of 10.
    here is the dump of the application Log: At least some of it.
    An exception of type System.Data.SqlClient.SqlException was thrown.  Additional exception information: Cannot find the object 'proc_createNewAppSiteDomainIds', because it does not exist or you do not have permission.
    System.Data.SqlClient.SqlException (0x80131904): Cannot find the object 'proc_createNewAppSiteDomainIds', because it does not exist or you do not have permission.

    Can you see if there is anything in the SQL ERRORLOG on the SQL Server that may help at the time you see this error?
    Does your user account (the user you're installing SharePoint with) have the sysadmin fixed role in SQL Server?
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Windows Azure Tools for Visual Studio 2013 - v2.2 install fails on Windows Server 2012 R2

    Microsoft Visual Studio Professional 2013
    Version 12.0.21005.1 REL
    Microsoft .NET Framework
    Version 4.5.51641
    The installation completes without any errors on my VM running Windows Server 2012 R2, however its not recognized in VS2013 ? It also breaks the Publish functionality when I try and publish a web site to my hosting provider.

    I tried install, uninstall, reinstall cycle several times without success. Any help would be greatly appreciated.
    here is my About info:
    Microsoft Visual Studio Professional 2013
    Version 12.0.21005.1 REL
    Microsoft .NET Framework
    Version 4.5.51641
    Installed Version: Professional
    LightSwitch for Visual Studio 2013   06177-004-0444002-02824
    Microsoft LightSwitch for Visual Studio 2013
    Microsoft Office Developer Tools for Visual Studio 2013 ENU   06177-004-0444002-02824
    Microsoft Office Developer Tools for Visual Studio 2013 ENU
    Team Explorer for Visual Studio 2013   06177-004-0444002-02824
    Microsoft Team Explorer for Visual Studio 2013
    Visual Basic 2013   06177-004-0444002-02824
    Microsoft Visual Basic 2013
    Visual C# 2013   06177-004-0444002-02824
    Microsoft Visual C# 2013
    Visual C++ 2013   06177-004-0444002-02824
    Microsoft Visual C++ 2013
    Visual F# 2013   06177-004-0444002-02824
    Microsoft Visual F# 2013
    Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02824
    Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
    Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
    The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
    ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
    For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
    ASP.NET Web Frameworks and Tools 2013   5.0.11001.0
    For additional information, visit http://www.asp.net/
    BusinessObjectEditor   1.0
    Information about my package
    CodeRush for Visual Studio   13.2
    Common Azure Tools   1.0
    Provides common services for use by Azure Mobile Services and Windows Azure Tools.
    CreateLayoutWizardPkg   1.0
    Create layout wizard.
    DevExpress.ExpressApp.Design.DesignDynamicPackage   1.0
    DevExpress VSIX Package
    DevExpress.ExpressApp.DesignPackage   1.0
    DevExpress VSIX Package
    DevExtreme.Design   13.2.6
    DevExtreme Visual Studio integration package
    DXCore for Visual Studio   13.2
    DXCore for Visual Studio
    PreEmptive Analytics Visualizer   1.2
    Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
    SQL Server Data Tools   12.0.30919.1
    Microsoft SQL Server Data Tools
    Windows Azure Mobile Services Tools   1.0
    Windows Azure Mobile Services Tools
    Workflow Manager Tools 1.0   1.0
    This package contains the necessary Visual Studio integration components for Workflow Manager.
    XtraReports package   1.0
    XtraReports package

  • The Comparison of IIS on Windows Server 2012 R2 and Websphere application Server on R6 or AS400

    Customer is looking for the internet application solution, and they would like to know the difference/ comparison of IIS on Windows Server and WAS on Linux.  I know it's hard to answer, but is there any data/document/information so that we could convince
    customer to use IIS instead of WAS on R6/AS400?

    Hi,
    I could not say which one is better.
    The advantage of IIS, you could refer to:
    http://www.microsoft.com/web/platform/server.aspx
    Similar thread has been discussed:
    Windows/.NET/ASP.NET/IIS/SQL Server vs. Linux/WebSphere/Java/Apache/Oracle information
    https://social.msdn.microsoft.com/Forums/en-US/9d3b975d-42cb-48fc-94c4-a0394d9f34e6/windowsnetaspnetiissql-server-vs-linuxwebspherejavaapacheoracle-information?forum=architecturegeneral
    Meanwhile, i think you could ask in IIS forums:
    http://forums.iis.net/
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Installing driver on windows server 2012 R2 in VAIO-VPCEH38FN model

    Hi,
    Q1. I'm using Windows server 2012 R2.  How can I install ethernet driver,Wifi Driver, Bluetooth driver etc in my VAIO laptop. can i install or not?
    Q2. can i install one Windows 7 and another Windows server OS in same drive?
    Please reply soon.. Thank you!
    Rajnikant

    Hi Rajnikant,
    >>>Question1
    As Dave have mentioned above, we may need to consult with the manufacturer of the laptop.
    >>>Question2
    If you want to create a multi-boot system, please refer to the link below,
    http://technet.microsoft.com/en-us/library/ee829686(v=WS.10).aspx
    Best Regards.
    Steven Lee
    TechNet Community Support

  • VMM Agent install fails on Windows Server 2012 R2 Hyper-V

    Hi,
    We are unable to install VMM 2012 R2 agent on Windows Server 2012 R2 server either from VMM console or manually on the hyper-v server.
    Error on VMM Console:
    Error (410)
    Agent installation failed on chsicoecdh03.casper.com.
    Fatal error during installation (0x80070643)
    Recommended Action
    Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
    ==================================================================
    Error on Hyper-v server:
    MSI (c) (E8:D0) [16:53:24:726]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Agent (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
    or error status: 1603.
    Also, I suspect may be issue with WMI then checked WMI repository and it is in consistent state. winmgmt /verifyrepository.
    Please help on this issue.
    Any help would be appreciated.
    Thanks
    Kumaresan Lakshmanan

    So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
    post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
    virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
    Im disappointed in MS right now.

  • Troubleshoot problems with installing updates on Windows Server 2012 Standart Edition

    When trying to install last update, receiving next errors:
    Installation Failure: Windows failed to install the following update with error 0x80070020: Cumulative Security Update for Internet Explorer 10 for Windows Server 2012 (KB3003057).
    Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978127).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2982998).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2993958).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3002885).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3010788).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2978121).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3006226).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3005607).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB2975331).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB3008627).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3011780).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3003743).
    This problem reproduced on all my web-servers (Windows Server 2012 Std). How can I fix these problems

    Hi,
    Windows update error 0x80070020 can occur if a program is interfering with the automatic update process.
    Restart your computer or restart your computer in safe mode with network, then try to install the updates. Detailed information you may reference the link below(this applies also to Windows Server 2012 ):
    You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
    http://support.microsoft.com/kb/883825/en-us
    If the problem still exits, open Run, type %windir% and hit
    Enter, find a text file named WindowsUpdate, uploaded the log file.
    Best Regards,           
    Eve Wang

Maybe you are looking for