Not able to install latest Konica drivers on MAC OS 10.8.x

I am trying to install drivers for a networked Konica Minolta Bizhub C360 printer on Mac OS 10.8.x. Using latest driver from Konica for 10.8.x. The Mac cannot find the printer on the network! Worked on earlier version of OS. Looking for solution.

I've been scouring every place I can possibly think of for nearly four hours trying to find an Acrobat 9 Mac download - no luck I can find Windows downloads back to 8, but nothing for Mac.

Similar Messages

Not Able To Install Nvidia Graphics Drivers

Hello all!
This past week I just finished putting my new system together with a K8N Diamond Plus. Only major problem right now is i am not able to install Nvidia's drivers. Below are my components...
XP 64-Bit Edition
MSI K8N Diamond Plus
AMD Athlon 64 X2 3800+
BFG 7900 GTX 512MB
1 Gig Coirsar Ram
2 Wester digital HD in Raid 0
When I try and install the graphics drivers i get the message " The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit."
I used the chip set drivers listed here: http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=710&kind=1
Also I have tried the ones from NVIDIA's site: http://www.nvidia.com/object/nforce_nf4_winxp64_x16_6.83
The graphics drivers i used are from NVIDIA's site: http://www.nvidia.com/object/winxp64_81.98.html
BFG Tech support guy had me look under display adapters in device manager. It only has Standard VGA Graphics Adapter listed. He said I did not have my chip set drivers installed (though i have), or the motherboard was not recognizing it. Also he said they do not support XP-64 and would not offer me any more support so long as i run it.
I just can not believe that XP 64, 7900 GTX, and this great K8N Diamond Plus can not get along.
Any advice anyone has for getting my Diamond Plus and my graphics card to jive together would be greatly appricated.
Thankyou all!!

Thankyou guys for the responses. I was able to find drivers that worked with my card here..
http://www.laptopvideo2go.com/index.php?drivers&series=80&os=2&type=1&dir=1
Now my only current issue left is that I have no sound. It is enabled in the BIOS, installed the 64-bit drivers from MSI site, tired installing drivers off disk. Any suggestion?

External monitor not working after installing latest NVIDA drivers

I have a mid-2010 MacBook Pro. I installed bootcamp and Windows 7 x64. I performed all the Windows updates then installed the Apple Bootcamp driver CD. Everything was working fine and I was able to connect an external LCD monitor using a mini display port to HDMI cable (the LCD only has HDMI ins).
I then came across a piece of Windows software that requires the latest production NVIDIA drivers so I went to the NVIDIA web site and downloaded their installer for the GT330M which is the chipset in this MacBook Pro.
The NVIDIA installers ran fine and installed version 275.33 of their drivers, however, when I hook up the external display the primary display goes black and the external monitor simply cycles through all the inputs like it can't find a signal. When I unplug the mini display adapter from the MBP the MBP screen returns to normal.
Thoughts?
TIA,
-Noah
PS. Windows 7 *****. Took over 3 hours to install and apply all the Windows updates with countless reboots. Lion took under 20 minutes to fresh install.

Well low and behold I tried clearing PRAM again and I reset my monitor to factory defaults. Reconnected my monitor and the thing works now. Very strange but I'm Happy that it's working again. *WHEW*

Not able to install Emulex HBA drivers in BL 460c G6

Hi,
HP BL 460c G6 model server came with inbuilt Emulex HBA card.
Now the problem is we are unable to findout the WWPN numbers of the HBA card.
In device manager Fibre channel contoller drivers showing as missed.
We tried to upgrade all the HP components using latest HP SPP, but there is no use.
Please some one can help on this issue.
Regards,
Mahesh.

Hi, Mahesh:
You may also want to post your question in the HP Business Support Forum -- Server Blades section.
http://h30499.www3.hp.com/t5/HP-BladeSystem-Server-Blades/bd-p/bladescategory01#.Ugjwm-l8O9I
Regards,
Paul

I was try ubuntu os, they have default mozilla browser. I was trying to view a video but was not able to install required flash drivers ?

How to install flash driver on mozilla browser using ubuntu os ? I find a link to install flash driver on the video but after installing again it gives the same message to install again.

Latest Flash player versions here:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
*http://kb.mozillazine.org/Flash
*http://kb.mozillazine.org/Determining_plugin_directory_on_Linux

HP Notebook - 15-ac043tu - NOT ABLE TO INSTALL WIFI DRIVERS FOR WINDOWS 7 -64 BIT

I baught HP Notebook - 15-ac043tu. I am not able to install wifi drivers in windows 7 home edition . I have downloaded all drivers from HP Link shown below, http://support.hp.com/in-en/drivers/selfservice/hp-15-ac000-notebook-pc-series/7771404/model/8326116#Z7_3054ICK0K8UDA0AQC11TA930C7 Can anyone help me ?

Hi I am facing a similar issue,Last week I bought my friend this Hp Notebook 15 (15-ac043TU) with DOS, I installed Win8 (64bit) and tried installing drivers from 'http://support.hp.com/, but its not accepting the WLAN drivers, I tried many, available for this model for win7 as well as for win8.1, wondering there was no win8 option, however it should work for Win8, I also followed your suggest but got the same error - "Update.cpp 1205" If you need Hardware Id, on 'Network Controller' - properties in devices manager, it is -PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 Thank you and Regards:Gagan

I'm not able to install windows 7 in my imac 21' which has the latest OSX 10.9 It keeps saying that I need a 64bit version of win7 which i actually have but it doesn't seems to be recognize as one.

I'm not able to install windows 7 in my imac 21' which has the latest OSX 10.9
It keeps saying that I need a 64bit version of win7 which I actually have but it doesn't seems to be recognize.
Can someone help me out?
Thank you

To my knowledge there are no official MS Windows DVDs that contain both the 32 and 64 bit versions. There is a way to make a USB thumb drive that has both bit version on it but AFAIK this can't be done on a DVD disc even with a Dual Layer DVD disc.
For the Windows installer to function, actually boot the system to the install routine, certain files have to be on a certain area of the DVD disc. If by chance you really do have a DVD disc that contains both bit versions your Mac is only seeing the 32bit version on that disc.
You'll need to get a Real MS DVD of just the 64bit version or download the 64bit version ISO from My Digital Life and burn it to a DVD disc.
Pedroapple wrote:
In fact i'm using a DVD with both 32 and 64-bit win7. But it's the only one I have. I don't want to install the newest Win 8.
So you're saying there is no solution for this?
Thank you so much for your response.

Not able to install own Plugin in Windows 7 Ultimate,Latest Firefox

Not able to install own Plugin in Windows 7 Ultimate,Latest Firefox. Please provide any RDF changes i need to do for installing on Windows 7 Ultimate.Latest Firefox

Hi raazb4u:
Have a look at this for starters:
https://developer.mozilla.org/en/Extension_Versioning,_Update_and_Compatibility
Let me know, if this is already known to you and does not adress the problem. I'll then go and check deeper, if necessary.
Regards
smo

Satellite C660 - not able to install the WXP chipset driver

Go !
I installed WIN XP in my Toshiba Satellite C660 laptop, and downloaded the drivers for windows XP,but I am not able to install the chipset and display drivers.
It says 'This computer does not meet the minimum requirment for installing this software.
Setup will exit now' .
Can you help me,please ?

Hi
Notebook supports the Mobile Intel(R) GM45 Express Chipset
Its Intel chipset so you can find the drivers on Intel page.
Here is an Intel page which allows you to check the system for latest updates:
http://www.intel.com/p/en_US/support/detect/graphics

Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO

I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??

Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued

Garageband was not able to install the new sounds

I'm on an iMac 21.5-inch (mid 2011) running Yosemite; 2.5 GHz Intel Core i5; 4GB memory.
A few months ago, I uninstalled GarageBand. Now I'm trying to reinstall it. I can get GarageBand 6 reinstalled, but I would like to get working with the latest version. I'm able to download the latest version from the App Store with no issue. It installs with no issue.
When I open it, it thanks for me downloading it, and then begins to download "an essential collection of sounds and loops." After a bit of downloading, it asks for my admin password; I enter it, and a few seconds later, it gives the error: "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again." Closing and reopening GarageBand just takes me through the same loop (no pun intended). When the window is open, if I click on the GarageBand menu in the Apple bar, nothing happens.
It does not ask me to accept anything; I am signed into the App Store with the same Apple ID I have always used (it is the only one I have ever had, so that's not the issue). I am an admin on my Mac, so it's not a permissions issue. It's not a password issue either.
Things I have tried:
Rebooting into Safe Boot and opening from there; same issue.
Repaired permissions (it fixed oodles of things completely unrelated to GarageBand); same issue.
Creating a new admin profile and opening from there; it gives a different error, but the effect is the same.
Removed the program, trashed anything remotely related to GarageBand (preferences, folders, etc), emptied the trash, restarted the computer, reinstalled; same issue.
Installed GarageBand on top of itself, just in case; same issue.
I can't think of what else to try. Help!
For reference, here is a screenshot of what I'm getting stuck on:

The solution Lijoesat posted above worked for me!
First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
I tried to empty the trash bin after but many files was locked and Garageband would still not install.
I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
The inserted picture show some of the folder structure, I deleted everything after private/var/folders/

Not able to install scanner part of 'HP PSC 1410 all-in-one'[SOLVED]

Despite trying instructions in the wiki, checking earlier reports of this problem on the forum and trying on reports from google, I am not able to install the scanner part of 'HP PSC 1410 all-in-one'. The command 'sane-find-scanner' finds it but 'scanimage -L' does not. Also xsane and simple-scan program do not find it. Any help will be appreciated.
(I also tried these entries in the udev sane rules:
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"
"SUBSYSTEM=="usb_device", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
but they do not work).
Some previous threads:
https://bbs.archlinux.org/viewtopic.php?id=107474
https://bbs.archlinux.org/viewtopic.php?id=65431
Not able to install sane-dev from AUR; 'makepkg -s' gives error:
==> WARNING: Cannot find the git binary required to determine latest git revision.
Last edited by rnarch (2012-03-28 05:05:09)

Git was not installed. So I installed it and ran 'makepkg -s' again. It ended with following error:
installing saned.conf in /etc/sane.d/saned.conf...
installing dll.conf in /etc/sane.d/dll.conf...
for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \
/bin/sh ../mkinstalldirs /home/sane-dev/pkg/usr/share/sane/${dir} ; \
done
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/artec_eplus48u
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/gt68xx
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/snapscan
mkdir -p -- /home/sane-dev/pkg/usr/share/sane/epjitsu
/bin/sh ../mkinstalldirs -m 775 -g uucp /home/sane-dev/pkg/var/lock/sane
Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
Create each directory DIR (with mode MODE, if specified), including all
leading file name components.
Report bugs to <[email protected]>.
make[4]: *** [install-lockpath] Error 1
make[4]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[3]: *** [install-data-am] Error 2
make[3]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in build().
Aborting...
Please note the line: Report bugs to <[email protected]>. Is it a bug? Sane-dev was successfully installed by others, eg: https://bbs.archlinux.org/viewtopic.php?id=65431
Last edited by rnarch (2012-03-26 01:11:57)

Not able to install windows 7

Hi - I am not able to install windows 7 in my imac (latest version). When I try using the bootcamp, it gets stuck at the place where I am asked to partition the hard disk for the windows system and does not go any further. Has anyone experienced such a scenario?

This is one method.
1. Remove 240G SSD from Optibay.
2. Re-install Optical drive.
3. Boot from 240G SSD using an external enclosure/SATA-to-USB connector. You can also boot from an external flash drive as mentioned in OS X: Installing OS X on an external volume - Apple Support.
4. Run BCA and format the 128G for Windows completely.
5. Install Windows.
6. Remove the Optical drive and install the 240G SSD and test.

I am not able to install application. i am getting that it requires IOS 4.3

I am not able to install any application. I am getting pop saying it requires iOS 4.3. But when i tr to upgrade my touch to 4.3 from 4.2.1, it says its running on latest iOS. Please help. Is my touch is waste now as apple don't support. Please help

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

HT5188 I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad. One code in the spreadsheet says it's already been used but shows no serial number or device name.

I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad using Apple Configurator. One code in the spreadsheet says it's already been used but shows no serial number or device name.

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Not able to install latest Konica drivers on MAC OS 10.8.x

Similar Messages

Maybe you are looking for