Not able to install mac os x server 10.5.4
Hello,
I've inherited a MAC g5 from a previous sys admin.
it had a number of issues so i decided to do a clean install.
i've set in my os x 10.5.4 server and rebooted that didn't work. when i chose the dvd it just hanged there.
so i installed a mac pro (came with the g5 ) as i've read in an online how to that described my exact problem. once done i tried installing the server again and same issue happened.
now i have mac pro on my g5.
after research it seems that my mac os x server 10.5.4 has another version which is older than the G5. so it cannot be installed.
i tried using a targeted mode though came into another set of trouble:
1. tried booting from the dvd using a macbook pro with a fire wire plugged into it.
result: macbook kept restarting when i chose the mac os x server
2. tried booting from dvd using an imac.
result: after choosing the dvd it hangs a bit and then boots normally from hardidisk.
3. picked an old IMAC and booted from it
result: it worked, and i installed the mac os x server on one of the HDD in my g5
once done, i've shut down both, unplugged firewire and then booted the G5
a grey screen appeared with another hdd in the middle of the screen and it just stayed there.
Can someone please advise how can i proceed?
PS: i've contacted the apple reseller, though as our support contract ended they couldn't help.
The retail disks I've seen in that era were usually black in color. The non-retail disks tended to be gray in color. IIRC, the part number for the 10.5.4 Mac OS X Server Leopard Server retail disk is MB605Z/A.
If it's not a retail disk, then the contents are usually tailored for a specific Mac box.
The MacBook Pro would have to be a fairly old model to boot 10.5.4; [here are the Mac Intel minimum OS version requirements (HT1159)|http://support.apple.com/kb/HT1159], and (though there were no MBP PPC boxes AFAIK) [here are the PPC version requirements (HT2191)|http://support.apple.com/kb/HT2191].
The "issues" that precipitated this reinstallation sequence could well be a disk or processor or memory or other hardware problem with the server, too.
Similar Messages
-
Not able to install SAP Web Application Server -6.40
iam running on SAP NETWEAVER Studio 6.0.21 in Windows XP operating System , not able to install SAP Web Apllication Software -6.40 .
iam not sure what to choose(while Installation) central system or distributed System ,i have tried in either way but
still not able to install the software .
If i go with Sap System Installtion>Java System >Distributed system>Java Central Instance installation ,it throws me getJavaHome was executed with status error ......
then ,
what is the version of Sap Web Application Server to be installed if my system runs on
SAP NETWEAVER Studio 6.0.21 or 6.0.11
cheers
SundarHello,
What do you want to do exactly?
You speak about SAP Netweaver Studio? I suppose you mean Netweaver Developer Studio?
Do you want to install a complete SAP System on your windows XP?? or only the Java part?
Thanks to give us more info
Olivier -
Not Able to install Weblogic RFID Edge Server in Solaris10
I have downloaded Bin file for Weblogic RFID Edge Server for solaris10. When i am trying to install it was telling Cannot Execute. I gave all permissions for that file. can anybody hele me to resolve this issue.
Hi,
I am not able to install Bea Weblogic RFID
Edge Server. I gave all permissions to that file.
$ ./rfid_edge220_solaris32.bin
./rfid_edge220_solaris32.bin: cannot execute
Could you please tell me the solution to resolve this
issueWhat is the output of " file fid_edge220_solaris32.bin". -
Not able to install or generate acs server certificate
Hi,
I have one test set-up with one layer 3 switch and one autonomous AP 1131. I have configured one SSID and without any authentication and it was not able to connect successfully.
But now i want to try enable WPA2 enterprise ( Actually , after checking with the test set up , i am going to implement in live set-up where i have to configure WPA2 enterprise so that i would like to go for testing wpa2 enterprise not wpa2 personal ).
I have ACS server 3.0 trial version and installed on windows server 2000 and
on AP 1131 i have configured radius server commands
( aaa- new model and radius server host ... ip address ... key ..... shared secret ... password .. ).
I am confused with certificate which is required to install on acs server but i am not able to generate the certificate or not able to get the certificate from anywhere in acs server option.
how to generate acs server certificate in trial version 3.0 and after generating how to install in acs server and what about client ... will it be same certificate which i need to install in cllient PC's and if yes how to add in client pc's and if not , where will i get cllient certificate ,..
if i buy ACS software which i will be installed windows platform , i will get two certificate ,,,,,,,,, what about acs trial version software .... will i be able to get certificate .......
i am trying to refer so many documents but it could not help me ..
Your help will be appreciative.
Looking for proper information.Hi,
Thanks for your response ....
obivously , This ACS 3.0 is end of supprt but when i tried to install the acs 4.0 or later , I am not getting an error saying " basic platform should be installed first , that is ACS 3.0 ".
That is the reason i have gone for this edition .
Should i go for upgrading the acs 3.0 to 4.1 or later version ?
if so , will it be possible on trail version ?
please give me your suggestion. -
Not able to install IIS on Windows Server 2012
I am unable to install IIS on Windows Server 2012. I get the error as shown in the below screenshot. Error code is 0x800f0922. I did RestoreHealth but that has not helped. Any help will be appreciated.
Hi Yogesh,
Just last week was installing IIS on W12R2 server and got stuck and found easy way of installing this as follow.
when you start installing IIS and at the last step as i marked on red square confirmation. there you find
export configuration settings..go to and export it to C drive and open Powershell by right clicking as open as administrator and run this from Powershell and it will install successfully.
Please let me know if you are facing any issue, since this way it has to work.
OR if you it already worked let me know or mark as correct.
Regards
Raj Navalgund
ADS/DNS/DHCP/RIS/GROUP POLICY/PowerShell/VMware/Esxi/Storage. -
I have Dell XPS with Quad core Intel CPU, 4 GB RAM and 500GB HDD + 500GB RAID. I really want to install Mac OS X Server on it but I can not find where to buy OS X Server and I'm not sure that it suitable to my XPS, I'm afraid that is not acceptable to install. Anyone have idea about this please give me some information,thank you.
Hello Benz_KU,
I am afraid you won't be able to install Mac OS X server on you Dell computer. There are technical reasons for that as well as legal reasons: according to the "Software License Agreement for Mac OS X Server":
"This License allows you to install and use one copy of the Mac OS X Server software (the “Mac OS X Server Software”) on a single Apple-labeled computer at a time."
Best regards -
I am not able to install my 'Complete National Geographic' cd on my Mac mini which runs Lion OS. The error message I get says 'Can't open installer as classic environment is no longer supported' can some one suggest a solution.
It means the software is PowerPC code, which is no longer supported in Lion. Your choices are to go back to Snow Leopard, run Snow Leopard Server in a virtual machine within Lion, see if the vendor has an updated version of National Geographic that will run on an Intel Mac, or run the software on an older Mac separately.
-
Not able to install SQL server on windows 7 - Installation halts during pre-installation.
Hi Team,
Am not able to install SQL Server on my windows. i have checked several links and sites. But nothing helped. Following is captured in the boot strap logs.
2014-09-19 12:31:48 Slp: Running Action: StartSqmSession
2014-09-19 12:31:48 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-09-19 12:31:48 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
2014-09-19 12:31:48 Slp: Sco: Attempting to get registry value CustomerFeedback
2014-09-19 12:31:48 Slp: SQM is opted-out by command line parameter /SQMREPORTING or registry key setting, SQM session is closed
2014-09-19 12:31:48 Slp: Completed Action: StartSqmSession, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: ValidateSettingsAgainstScenario
2014-09-19 12:31:48 Slp: Scenario: RunRules
2014-09-19 12:31:48 Slp: Completed Action: ValidateSettingsAgainstScenario, returned True
2014-09-19 12:31:48 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: RunDiscoveryAction
2014-09-19 12:31:48 Slp: Running discovery on local machine
2014-09-19 12:31:48 Slp: Discovery on local machine is complete
2014-09-19 12:31:48 Slp: Completed Action: RunDiscoveryAction, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: DiscoverClusterData
2014-09-19 12:31:48 Slp: Completed Action: DiscoverClusterData, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: RunStandaloneRules
2014-09-19 12:31:48 Slp: Running in UI mode, unattended rules execution skipped.
2014-09-19 12:31:48 Slp: Completed Action: RunStandaloneRules, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: RunRulesUI
2014-09-19 12:31:48 Slp: Start Action: RunRulesUI
2014-09-19 12:31:48 Slp: Configuration file: D:\Setup\SQL2008_R2\Standard Edition\x64\configuration.uicfg
2014-09-19 12:31:48 Slp: Adding registration information 'ShowWizard' for type 'Microsoft.SqlServer.Management.ActionHandlerInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'InstallWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'InstallClusterWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'AddNode' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RemoveNode' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'PrepareClusterWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'CompleteClusterWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'UninstallWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'UpgradeWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'ComponentUpdate' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RepairWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RunRulesUI' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'EditionUpgradeWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'PatchWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RemovePatchWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'PrepareImageWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'CompleteImageWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:49 Slp: Rules to be checked: OsVersionCheck;ThreadHasAdminPrivilegeCheck;RebootRequiredCheck;WmiServiceStateCheck;AclPermissionsFacet;MediaPathLength;SetupCompatibilityCheck
2014-09-19 12:31:49 Slp: If any rule does not pass, setup can still continue: True
2014-09-19 12:31:49 Slp: Adding rule result notification channel: RulesEngineNotificationChannel
2014-09-19 12:31:49 Slp: Loading rule: OsVersionCheck
2014-09-19 12:31:49 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetOsInfo
2014-09-19 12:31:49 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: ThreadHasAdminPrivilegeCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetAdminCheck
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: RebootRequiredCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetRebootRequired
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: WmiServiceStateCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.WmiServiceInfo
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: AclPermissionsFacet
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.AclPermissionsFacet
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: MediaPathLength
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.MediaPathLenghtFacet
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: SetupCompatibilityCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.SetupCompatibilityCheck
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Executing rules engine...
2014-09-19 12:31:50 Slp: Completed Action: RunRulesUI, returned True
2014-09-19 12:31:50 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:50 Slp: Running Action: GatherUserSettings
2014-09-19 12:31:50 Slp: Start rule execution, total number of rules loaded: 7
2014-09-19 12:31:50 Slp: Initializing rule : Minimum operating system version
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetOsInfo
2014-09-19 12:31:50 Slp: Rule 'OsVersionCheck' detection result: major=6, minor=1, SP=1
2014-09-19 12:31:50 Slp: Evaluating rule : OsVersionCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The operating system version meets the minimum requirements for this product.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Setup administrator
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetAdminCheck
2014-09-19 12:31:50 Slp: Rule 'ThreadHasAdminPrivilegeCheck' Result: Running thread has administrator privilege.
2014-09-19 12:31:50 Slp: Evaluating rule : ThreadHasAdminPrivilegeCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The account running SQL Server Setup has administator rights on the computer.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Restart computer
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetRebootRequired
2014-09-19 12:31:50 Slp: Rule 'RebootRequiredCheck' results: IsRebootNotRequired=True
2014-09-19 12:31:50 Slp: Evaluating rule : RebootRequiredCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The computer does not require a restart.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Windows Management Instrumentation (WMI) service
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.WmiServiceInfo
2014-09-19 12:31:50 Slp: Rule 'WmiServiceStateCheck' detection result: WMI Service is running
2014-09-19 12:31:50 Slp: Evaluating rule : WmiServiceStateCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The Windows Management Instrumentation (WMI) service is running.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Consistency validation for SQL Server registry keys
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.AclPermissionsFacet
2014-09-19 12:31:50 Slp: Launching external tool: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x64.exe
2014-09-19 12:31:50 Slp: ------------------------------------------------------------
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer\Client - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer\Client\SuperSocketNetLib - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer\Client\SuperSocketNetLib\LastConnect - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\10.50 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap\Setup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\1033 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\1033\CurrentVersion - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\CurrentVersion - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\MSIRefCount - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\ConfigurationState - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools\ClientSetup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools\Shortcut - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools\Shortcut\SQL Server Installation Center R2 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Setup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER1 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER1\Setup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount\SqlRsFx0150 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount\SqlSupport10R2 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount\sql_ssms - OK.
2014-09-19 12:31:50 Slp: ------------------------------------------------------------
2014-09-19 12:31:50 Slp: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x64.exe exit code: 0
2014-09-19 12:31:50 Slp: Launching external tool: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x86.exe
2014-09-19 12:31:50 Slp: ------------------------------------------------------------
2014-09-19 12:31:51 Slp: ------------------------------------------------------------
2014-09-19 12:31:51 Slp: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x86.exe exit code: 0
2014-09-19 12:31:51 Slp: Rule 'AclPermissionsFacet' detection result: AreSqlAclPermissionsCanonical= True
2014-09-19 12:31:51 Slp: Evaluating rule : AclPermissionsFacet
2014-09-19 12:31:51 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:51 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:51 Slp: Rule evaluation message: SQL Server registry keys are consistent and can support SQL Server installation or upgrade.
2014-09-19 12:31:51 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:51 Slp: Initializing rule : Long path names to files on SQL Server installation media
2014-09-19 12:31:51 Slp: Rule applied features : ALL
2014-09-19 12:31:51 Slp: Rule is will be executed : True
2014-09-19 12:31:51 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.MediaPathLenghtFacet
2014-09-19 12:31:51 Slp: Rule 'MediaPathLength' INSTALLMEDIAPATH length is 47
2014-09-19 12:31:51 Slp: Evaluating rule : MediaPathLength
2014-09-19 12:31:51 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:51 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:51 Slp: Rule evaluation message: The SQL Server installation media is not too long.
2014-09-19 12:31:51 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:51 Slp: Initializing rule : SQL Server Setup Product Incompatibility
2014-09-19 12:31:51 Slp: Rule applied features : ALL
2014-09-19 12:31:51 Slp: Rule is will be executed : True
2014-09-19 12:31:51 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.SetupCompatibilityCheck
2014-09-19 12:31:51 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-09-19 12:31:51 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\100\Bootstrap\Incompatibilities
2014-09-19 12:31:51 Slp: Searching for reg path SOFTWARE\Microsoft\Microsoft SQL Server\100\Bootstrap\Incompatibilities. Open subkey result is False
2014-09-19 12:31:51 Slp: Regkey not present. No incompatibilities
2014-09-19 12:31:51 Slp: Incompatibility detected = False
2014-09-19 12:31:51 Slp: Evaluating rule : SetupCompatibilityCheck
2014-09-19 12:31:51 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:51 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:51 Slp: Rule evaluation message: Setup has not detected any incompatibilities.
2014-09-19 12:31:51 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:51 Slp: Saving results to datastore...
2014-09-19 12:31:51 Slp: Saved to directory.......C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\SystemConfigurationCheck_Report.htm
2014-09-19 12:31:51 Slp: Sco: Attempting to create directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources
2014-09-19 12:31:51 Slp: Sco: Attempting to create directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources, security descriptor
2014-09-19 12:31:51 Slp: Sco: Attempting to set directory full path
2014-09-19 12:31:51 Slp: Sco: Attempting to normalize directory path C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources
2014-09-19 12:31:51 Slp: Sco: Directory 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources' already exists, skipping creation, moving to set security descriptor.
2014-09-19 12:31:51 Slp: Sco: Attempting to set security descriptor for directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources, security descriptor
2014-09-19 12:31:51 Slp: Sco: Attempting to check if directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources exists
2014-09-19 12:31:51 Slp: Sco: SDDL is NULL/empty and overwriteSecurityDescriptor is false, so nothing to do, return.
2014-09-19 12:31:51 Slp: Generating HTML report by applying XsltTransformation and saving to Log folder...
2014-09-19 12:31:51 Slp: Rules evaluation report is available now at C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\SystemConfigurationCheck_Report.htm
2014-09-19 12:31:54 Slp: Completed Action: GatherUserSettings, returned True
2014-09-19 12:31:54 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:54 Slp: Running Action: Progress
2014-09-19 12:31:54 Slp: Completed Action: Progress, returned True
2014-09-19 12:31:54 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:54 Slp: Running Action: Close
2014-09-19 12:31:54 Slp: Stop Action
2014-09-19 12:31:54 Slp: Completed Action: Close, returned True
2014-09-19 12:31:55 Slp:
2014-09-19 12:31:55 Slp:
2014-09-19 12:31:55 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:55 Slp:
2014-09-19 12:31:55 Slp: Setup result: 0Hi,
Iam try to install Microsoft SQL Server 2008 R2 on Windows 7.
Following is the contents from summary file.
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Exit message: Passed
Start time: 2014-09-19 12:31:55
End time: 2014-09-19 12:32:16
Requested action: ComponentUpdate
Machine Properties:
Machine name: J1018165WIN7LT
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\Setup\SQL2008_R2\Standard Edition\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: ComponentUpdate
CONFIGURATIONFILE:
ENU: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
PASSPHRASE: *****
PID: *****
QUIET: False
QUIETSIMPLE: False
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\SystemConfigurationCheck_Report.htm -
Not able to install studio + controller on windows server 2012 r2
Hi,
i have installed windows server 2012 R2, now i want to install windows HCK 2.1 with controller + studio option but i am not able to install because that option is grey. what additional settings i have to do in order to successfully installation
of WHCK. please guide me.
ankur dubeyHi, see the
Windows HCK Getting Started.
Note:
Controller isn't supported on Windows Server 2003, Windows Server 2008, Windows Vista®, Windows XP, or Windows 2000.
Controller isn't supported on an installation that has already been set up as a domain controller.
Controller isn't supported in a virtual PC or any third-party Hypervisor environment.
Greetings
Nino
...esistono i motori di ricerca, facci un salto e troverai molte delle risposte che ti darò io. -
Not able to install Bea Weblogic RFID Edge Server in solaris10
Hi,
I am not able to install Bea Weblogic RFID Edge Server. I gave all permissions to that file.
$ ./rfid_edge220_solaris32.bin
./rfid_edge220_solaris32.bin: cannot execute
Could you please tell me the solution to resolve this issueHi,
I am not able to install Bea Weblogic RFID
Edge Server. I gave all permissions to that file.
$ ./rfid_edge220_solaris32.bin
./rfid_edge220_solaris32.bin: cannot execute
Could you please tell me the solution to resolve this
issueWhat is the output of " file fid_edge220_solaris32.bin". -
FaceTime can’t be installed on “Macintosh HD” because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion.any help with this would be greaty appreciated.
FaceTime is included in Lion. The App Store version is for 10.6. If you deleted it, restore it from a backup, or reinstall the Mac OS.
-
I am using mac os x 10.7.3 i m not able to install canon LBP2900 on my system.
am using mac os x 10.7.3 i m not able to install canon LBP2900 on my system.
That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account. -
Why am i not able to install creative cloud?
Why am i not able to install creative cloud? i paid for the package, downloaded the installer now its been trying to connect to the server since a day..
You can check these :
Creative Cloud Connection Update
Sign in, activation, or connection errors | CS5.5 and later
CreativeCloud Manager can't connect to Internet
Regards
Rajshree -
Garageband was not able to install the new sounds
I'm on an iMac 21.5-inch (mid 2011) running Yosemite; 2.5 GHz Intel Core i5; 4GB memory.
A few months ago, I uninstalled GarageBand. Now I'm trying to reinstall it. I can get GarageBand 6 reinstalled, but I would like to get working with the latest version. I'm able to download the latest version from the App Store with no issue. It installs with no issue.
When I open it, it thanks for me downloading it, and then begins to download "an essential collection of sounds and loops." After a bit of downloading, it asks for my admin password; I enter it, and a few seconds later, it gives the error: "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again." Closing and reopening GarageBand just takes me through the same loop (no pun intended). When the window is open, if I click on the GarageBand menu in the Apple bar, nothing happens.
It does not ask me to accept anything; I am signed into the App Store with the same Apple ID I have always used (it is the only one I have ever had, so that's not the issue). I am an admin on my Mac, so it's not a permissions issue. It's not a password issue either.
Things I have tried:
Rebooting into Safe Boot and opening from there; same issue.
Repaired permissions (it fixed oodles of things completely unrelated to GarageBand); same issue.
Creating a new admin profile and opening from there; it gives a different error, but the effect is the same.
Removed the program, trashed anything remotely related to GarageBand (preferences, folders, etc), emptied the trash, restarted the computer, reinstalled; same issue.
Installed GarageBand on top of itself, just in case; same issue.
I can't think of what else to try. Help!
For reference, here is a screenshot of what I'm getting stuck on:The solution Lijoesat posted above worked for me!
First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
I tried to empty the trash bin after but many files was locked and Garageband would still not install.
I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
The inserted picture show some of the folder structure, I deleted everything after private/var/folders/ -
Not able to install Intellisync on Windows Mobile 6.1
Hi
We have got GMS 3.0.1 running on Linux and GW 8.0.2.
On my HTC Touch Diamond (Windows Mobile 6.1) I am not able to install Intellisync. I'm sending the Intellisync_setup (Microsoft Smartphone OS-Devices) via SMS. On my mobile device I tried either opening the link directly (default opens with Opera Mobile) or pasting it into Internet Explorer. In Opera is shown a message that the certificate of the server does not fit to the hostname. But certificate and hostname are exactly the same. It is a self-issued certificate by the way. I click on the accept button and select "Windows Mobile Smartpone" from the list. Then I select install on device. Installation starts... In the middle of "downloading package ..." I get: "Install Error: Connection problem. Please try again later, or contact your system administrator." After confirming with OK the installation window closes. I reboot the mobile device and there is the Intellisync Install window where I can enter server and credentials. After entering the servername and credentials I get the message: "A secure connection could not be established. Check your connection settings, or contact your system administrator" --> Ok --> "Authentication failed. Please try again." --> OK.
If I enter the same servername with https and same credentials over Opera or Internet Explorer I can access the GMS without any problems.
Have you got any ideas?
Thank you in advance for your help
pixel73Originally Posted by pixel73
Thanks for your suggestions.
I tried that already. But the installation process can't be finished. I am always stuck at the "Intellisync Install" window where I enter the server name and my credentials. After clicking on the connect button I always get the following three messages:
"A secure connection could not be established. Check your connection settings, or contact your system administrator."
"Connection problem. Please try again later, or contact your system administrator."
"Authentication failed. Please try again."
Now on GMS I changed the following options and rebooted afterwards:
"Enforce SSLv3 connection and a minimum 64-bit key" --> to NO
"Server Key Length" --> to 1'024
I again performed a hard reset on my HTC.
None of all that helped.
Could it be a problem with the mobile services provider?
I'm tempted to say to recheck the certificate you are using. Has this been working before?
Could be the CN on the certificate does not have the full dn (e.g. server.domain.com)?
Maybe you are looking for
-
Hi I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do
-
Management Console Doesn't Display
Hi Experts , we are facing issue with Management Console doesn't display after login ,none of the screens shows any user or activity data. Our DB admin went through the prerequisite list from note 1262933 and everything appears to be correct with the
-
I will be starting my Graduate School soon at a Fundamentalist seminary (www.bju.edu). Internet access here seems to be ultra filtered, and ultra blocked. I have a few questions about being able to access other computers on the Intranet. I cant seem
-
Using Garageband files with IDVD
I am posting this question again hoping someone can answer. I posted my question in the idvd forum and got zero responses. I used imovie08 and successfully edited a 58 minute movie and published it as a medium sized movie. I then used garageband to a
-
Hi, In PO we have date format before the delivery date which indicates whether the delivery date is to be entered and displayed as a calendar day, week or month. Following formats are in SAP: 1 Day format Day Day 2 Week form