Not able to install Oracle 10g on Windows 7 Ultimate

Dear Oracle Xperts,
Can anyone guide me how to go about installing on Windows 7. I downloaded the 10.2.0.3 version. Its not installaing throwing the following error.
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
Recommendation: Install the recommended Service Pack.
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 1406MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
I also installed the MS Loopback adapter.
Pls help me with any feedback
Thks and regards,
Indranil

Hi Srini,
Thank you very much for the direct link to that article. I've been trying to find it since Googling similar questions, all of which suggest going to My Oracle Support to get that article. Unfortunately when I went there I got prompted for contract ids or whatever, so the portal seems completely useless to the general public.
In my case, some machines would install on Windows 7 and some wouldn't because the CertifiedVersions prerequisite check would come back with either 5.1 (incorrect version, but allows installation) or 6.1 (correct version, but aborts installation). How a 5.1 could get returned for the Windows 7 version number is beyond me, but that was the issue.
The fix is that the -ignoreSysPreregs flag doesn't help in the product-specific prerequisites section. You need to specify the -ignorePrereq flag as the article shows instead - however if you run setup -help that flag isn't listed as an option! I do thank you very much for ending my frustration.

Similar Messages

Not able to install Oracle 10g on Windows Vista Home Premium

Hi All.
I bought new Laptop preinstalled with Windows vista Home premium. I tried to install Oracle 10g , but it failed.
Error: Oracle 10g doesn't support vista sp5. Should be less than sp5.
Can anybody suggest me, which version of Oracle supports Windows Vista HomePremium?

hi ,
please follow up the below link,
oracle 10g r1 is not supported for vista , but you can put the vista in the xp compatible mode , and then install it...
http://www.psoug.org/reference/vista.html
regards,
Mohammed Mehraj Hussain

Not able to install Oracle 10g Express on linux 64bit based on Dude's intr

I followed "https://forums.oracle.com/forums/thread.jspa?threadID=2200434" to install oracle 10g xe on Ubuntu 10.10 AMD 64-bit
but I ran into below error while I was trying to install 10g XE on linux 64bit
root@vdevluxcnhz0021:~# dpkg -i force-architecture libaio_0.3.104-1_i386.deb --------- this step is error
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
dpkg: regarding libaio_0.3.104-1_i386.deb containing libaio:
libaio1 conflicts with libaio
libaio (version 0.3.104-1) is to be installed.
dpkg: error processing libaio_0.3.104-1_i386.deb (--install):
conflicting packages - not installing libaio
Errors were encountered while processing:
libaio_0.3.104-1_i386.deb
Linux version
root@vdevluxcnhz0021:~# cat /etc/issue
Ubuntu 10.04.2 LTS \n \l
root@vdevluxcnhz0021:~# cat /proc/version
Linux version 2.6.32-28-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 23:57:16 UTC 2011
Can you please help on this?
Thanks
Edited by: user1997872 on Jan 4, 2012 7:07 AM

It looks like you will have to uninstall "libaio1", but I don't know for sure and don't have Ubuntu 10.4 available right now to play with.
Sorry but the instructions are for Ubuntu 10.10, not 10.4, which is different.
If you need to install XE on Ubuntu, I'd rather suggest 11gR2 XE:
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 how-to
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto

Database Could not able to (install Oracle 10G)

Dear all,
I had tried to install Oracle 10G using sapserver.cmd. but i didnt get dos Box even i didnt get any screen after Double click sapserver.cmd .
but if i tried this path SAPDVD/Ora_RDBMS/NT/I386/database/setup . i can install Oracle RDBMS.
I need to know whether above mentioned path is adviseable to install Oracle 10G
Kindly suggest
Regards

Hi Marcus ,
I have tried from command line also. I got the below error .
D:\>cd D:\Ora_RDBMS\NT\I386
D:\Ora_RDBMS\NT\I386>sapcustom.cmd
'D:\Ora_RDBMS\NT\I386
database\install\SETUP.EXE' is not recognized as an inter
nal or external command,
operable program or batch file.
D:\Ora_RDBMS\NT\I386>sapcustom.cmd
Kindly suggest .
Regards

Not able to install Oracle 10G on AIX 5.3 64-bit system

Hi,
i have got the software in DVD i have mounted the dvd on the filesystem
/dev/cd0 ---- /mnt (mnt folder contains the software), Have done following things to install but got following errors....
#cd mnt
# ls
client companio doc index welcome.htm
clusterw database gateways index.pdx
$cd database
# ls
doc install response rootpre runinsta stage welcome.htm
#cd rootpre
loadext orclclus pw_sysc2 pw_sysc3 pw_sysca rootpre.sh
# ./rootpre.sh
Required file ./pw-syscall32 is missing.
Aborting pre-installation procedure. Installations of Oracle may fail. // wat does this mean is that file belongs to operating system or missing in the source DVD
# /mnt/database/runinsta
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should run the shell script 'rootpre.sh' be
fore
you proceed with Oracle installation. rootpre.sh can be found at the top
level
of the CD or the stage area.
Answer 'y' if root has run 'rootpre.sh' so you can proceed with Oracle
installation.
Answer 'n' to abort installation and then ask root to run 'rootpre.sh'.
Has 'rootpre.sh' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-06-04_12-20-58PM. Please wait ...
Error in writing to directory /tmp/OraInstall2007-06-04_12-20-58PM. Please ensure that this directory is writa
ble and has atleast 69 MB of disk space. Installation cannot continue.
: Error 0
//////// I checked that in tmp folder i have got more than 69MB (i have 2 Gb )
/////// also created folder /u01/app/oracle and mounted in seperate volume which has
/////// 7GB space...
# cd ..
# cd install
# ls
addnode.sh images oneclick.pro .oui response unzip
clusterp.ini lsnodes oraparam.ini resource runinsta.sh
# ./runinsta.sh
./runinsta.sh[3]: ./runInstaller: not found.
Any Help would be appreciated.... struggling to install it.
Thanks & Regards
Bhanu

Hi,
I'm also facing some issues with respect to installation.
The oracle installer is getting started but the GUI screen is
not appearing.The installer is getting stuck with the following error
message.
INFO: Created system preferences directory in java.home".
I also tried starting utilities like xclock which is also not getting started.
Any suggestions would be really appreciated.
Regards,
Mahesh.

Installing oracle 10g on windows vista business

will i be able to install oracle 10g on Windows Vista business? Please respond me.

Oracle 10.2.0.3 is certified on Vista
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html

TNS 12549 error on installing Oracle 10g on Windows XP Home?

Hi,
I installed Oracle 10g on Windows XP Home by clicking on Disk1\install\setup (NOT Disk1\setup as instructed since that did not work). Everything seemed to go fine except towards the end of the install I got a whole bunch of errors saying that "operating system resource quota exceeded". There were options to Ignore or Abort at most of these stages. I chose Ignore and the whole install seemed to complete but I am not able to connect to the database using sqlPlus. I looked at the log files created where I saw a whole bunch of errors in several files. For example in sqlnet log, I saw this error (among others) appeneded below. It seems obvious that some resource quotas were exceeded but I am not able to figure out exactly what quotas should be increased. Any help regarding this would be greatly appreciated.
Thanks.
Sudip
===================================================
Fatal NI connect error 12549, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleorcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=CHAKRABORTY-04)(USER=Owner))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.2.0 - Production
Time: 13-MAR-2005 18:03:25
Tracing not turned on.
Tns error struct:
ns main err code: 12549
TNS-12549: TNS:operating system resource quota exceeded
ns secondary err code: 12560
nt main err code: 519
TNS-00519: Operating system resource quota exceeded
nt secondary err code: 8
nt OS err code: 0
===================================================

XP Home is not supported, despite of this some people get oracle to work.
But in your case, possibly your machine has simply not enough resources, 12549 is a very generic error. Check the hardware requirements in the installation guide.

Not able to install oracle fial over software

Hi all,
This is SAP Evironment
SAP : ECC6.0
OS : WIN2003
ORACLE : 10g
I am not able to install Oracle failover software.
I saw in note 986758
Change the last line of the script sapofs.cmd from the temporary
directory of
@"%rootdir%\install\setup.exe"
to
@"%rootdir%\install\setup.exe" -jreLoc=
c:\TEMP\OUIIA64\stage\Components\
oracle.swd.jre\1.4.2.11.0\1\DataFiles
When doing so, replace the name of the directory "C:\TEMP\OUIIA64"
with the name of the temporary directory that you created during the
installation of the Oracle software database
I am not understanding what exactly this meaning.
Please anybody help me in the loop
Thanks&regards
Ramakrishna

Hi Ramakrishna reddy ,
Installing Oracle 10.2 on Itanium 2 systems on Windows contains the following sections.
1) the Microsoft HotFixes required for the installation and operation of the database
2)the installation of the Oracle 10gR2 database software
3) the installation of the current Oracle 10gR2 patch set
4) the installation of the Oracle FailSafe server software 3.3.4.
I guess the first 3 sections you have completed. The 4th section (installing Oracle FailSafe server) point 3 says the following
Change the last line of the script sapofs.cmd from the temporary
directory of
   @"%rootdir%\install\setup.exe"
to
   @"%rootdir%\install\setup.exe" -jreLoc=
   c:\TEMP\OUIIA64\stage\Components\
   oracle.swd.jre\1.4.2.11.0\1\DataFiles
When doing so, replace the name of the directory "C:\TEMP\OUIIA64" with the name of the temporary directory that you created during the installation of the Oracle software database in step 3.
Here the step 3 points to the section 2 (installation of the Oracle 10gR2 database software). i.e it is referring to the point 3. i.e
Create a temporary directory, for example, C:\TEMP\OUIIA64. Note
that this directory is also required for the installation of Oracle
Failsafe (see below).
You have to replace directory "c:\TEMP\OUIIA64" with what you have given as temp directory while installing Oracle 10gR2 database software.
Hope this clarifies now.
Regards,
Arun.

Install Oracle 10g on windows 2008 Server 64bit

Is it possible to install Oracle 10g on Windows 2008 64bit . I read one post below it says , windows 2008 is not certified for oracle 10g ..
windows server 2008 Oracle 10G 64 bit
before I installed 32bit , it is throwing error message on alert log file on every 5 seconds.
"OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. ! "
if it is possible which version I want to download is best ..
and what is the recommendation whether it is 10g or 11g

You mean to say Oracle 10g 64bit will not work in Windows 2008..?No, i meaned the post you linked was written in year 2008, in that year it's was a unsupported platform for that oracle version. Actually its supported and you can install it.
Furthermore like Aman told you, It's more recommended install 11gR2 version
Edited by: Fran on 29-may-2012 4:20

Install oracle 10g in windows 7 64bit,

if some one can help me i do not have 10g software to install, i am new with oracle and i want to learn 10g, for that i need to install 10g software, from where i can get it.
and do i install oracle 10g in windows 7 64bit.

http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html

Can't install oracle 10g on windows 2008 R2

Please help me
I want install oracle 10g on windows 2008 R2 but can't install because I don't have file install oracle_10.2.0.4 and i can't download file from oracle.com
and oracle 11g i not license
Where can download file oracle install 10.2.0.4
thank you

user9357585 wrote:
same issue here. I need 10.2.0.3.0 with install software to bring a legacy sid over onto new server hardware that will not support Win 2003. I have Win 2008 32bit loaded and just need the software install ruitine to make the move. My legacy 10g server running on older hardware and Win 2003 works, but is now uncompliant with IA requirements now. We are sandboxing this application. My new server will need to have 2008 on it.
Will Oracle supply me the software. I have paid maintenace on my account every year. Just paid it for this year in Ocober. Should not have an issue here.submit a Service Request & you'll get your question answered

Can we install oracle 10g in windows vista

hi all
i am trying to install oracle 10g in windows vista ultimate ,
but it is not getting install in windows vista
wat is the version i have to use for windows vista ultimate ,
thank in advance

Hi,
you can also check certification from http://support.oracle.com ---> certifications.
and read below thread.
http://forums.oracle.com/forums/thread.jspa?threadID=445907&tstart=0

Not able to install oracle 10.2.0.4

we are trying to install SAP ERP 6.0 SR3 with oracle 10.2.0.4 on windows server 2008 R2 enterprise, but we are get getting some error
The dump number for oracle was 51036975.
We are not able to install oracle.
Can any one find me a solution for this problem

RAVITEJA8192 wrote:
we are trying to install SAP ERP 6.0 SR3 with oracle 10.2.0.4 on windows server 2008 R2 enterprise, but we are get getting some error
What was the error ?
Thanks

I am planning to buy macbook pro,as i am working as a oracle developer,so i want to ask will i be able to install oracle 10G or above versions on my mac...??

i am planning to buy macbook pro,as i am working as a oracle developer,so i want to ask will i be able to install oracle 10G or above versions on my mac...??

did you get a satisfactory response on your question re oracle 10g on os x snow leopard? I am curious as I have been 'struggling' with it for a few days now. To my experience thusfar, the oracle files provided are not up to date with current java versions or os x leopard and require some tweaking. my own answer to your question is that it does appear that you can install and run oracle 10g on mac os x snow leopard, but it seems to be a little hacky to get through it all. Some information here, other information there, haven't yet found a single source that has all the play by play and gotcha fixes documented. I am rsisting nuking my debian install on amd64 just to put fedoracore which does appear to be a supported env for oracle 10 on linux.

Ora-00604 while installing Oracle 10g on Windows XP SP2

I was installing Oracle 10g on Windows XP but the dbca was failling. So I tried to create a database manually.
But every time I launch this:
"SQL> startup nomount pfile="C:\oracle\product\10.2.0\admin\XP10G\scripts\initXP10G.ora";"
I always had:
ORA-00604: error occurred at recursive SQL level 1
ORA-02248: invalid option for ALTER SESSION
I tried to change some memory value in the init*.ora without more success.
So if anyone has been had such issue; he would be an help for me.
Thansks
MUGANGA

initXP10G.ora is a 3 Kbytes file created by OEM and updated by Dos edit program. Here bellow is the contain:
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# File Configuration
control_files=("C:\oracle\product\10.2.0\oradata\XP10G\control01.ctl", "C:\oracle\product\10.2.0\oradata\XP10G\control02.ctl", "C:\oracle\product\10.2.0\oradata\XP10G\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Cursors and Library Cache
open_cursors=150
processes=100
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\bdump
core_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\cdump
user_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\udump
# Miscellaneous
compatible=10.2.0.1.0
# Job Queues
job_queue_processes=10
# Database Identification
db_domain=""
db_name=XP10G
# SGA Memory
sga_target=177209344
# Processes and Sessions
processes=150
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=XP10GXDB)"
# Security and Auditing
audit_file_dest=C:\oracle\product\10.2.0\admin\XP10G\adump
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=58720256
shared_pool_size=83886080
nls_territory='SWITZERLAND'
nls_language='FRENCH'

Not able to install Oracle 10g on Windows 7 Ultimate

Similar Messages

Maybe you are looking for