Not able to install Oracle 10g on Windows Vista Home Premium

Hi All.
I bought new Laptop preinstalled with Windows vista Home premium. I tried to install Oracle 10g , but it failed.
Error: Oracle 10g doesn't support vista sp5. Should be less than sp5.
Can anybody suggest me, which version of Oracle supports Windows Vista HomePremium?

hi ,
please follow up the below link,
oracle 10g r1 is not supported for vista , but you can put the vista in the xp compatible mode , and then install it...
http://www.psoug.org/reference/vista.html
regards,
Mohammed Mehraj Hussain

Similar Messages

  • Install Oracle 9i on Windows Vista Home Premium

    I have a problem Installing Oracle 9i on Windows Vista Home Premium, I cant install it because it throws me an error message saying that is incompatible with my version of Windows. It is possible to install it with some patch or something??
    Message was edited by:
    user599646

    The only patch I know of is called Windows XP.
    In case you have not done any internet searches on this, even Oracle Database 10g was not compatible with Vista until Oracle applied some heavy patches and re-released it.
    And since Oracle9i is officially deprecated (nearest thing to obsolete as to make no difference) I see no reason for Oracle to backport the patches.

  • Not able to install Oracle 10g on Windows 7 Ultimate

    Dear Oracle Xperts,
    Can anyone guide me how to go about installing on Windows 7. I downloaded the 10.2.0.3 version. Its not installaing throwing the following error.
    Checking operating system requirements ...
    Expected result: One of 5.0,5.1,5.2,6.0
    Actual Result: 6.1
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Oracle Database 10g is not certified on the current operating system.
    Recommendation: Make sure you are installing the software on the correct platform.
    =======================================================================
    Checking service pack requirements ...
    Check complete. The overall result of this check is: Not executed <<<<
    OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
    Recommendation: Install the recommended Service Pack.
    =======================================================================
    Checking physical memory requirements ...
    Expected result: 256MB
    Actual Result: 1406MB
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Network Configuration requirements ...
    Check complete. The overall result of this check is: Failed <<<<
    Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
    Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    I also installed the MS Loopback adapter.
    Pls help me with any feedback
    Thks and regards,
    Indranil

    Hi Srini,
    Thank you very much for the direct link to that article. I've been trying to find it since Googling similar questions, all of which suggest going to My Oracle Support to get that article. Unfortunately when I went there I got prompted for contract ids or whatever, so the portal seems completely useless to the general public.
    In my case, some machines would install on Windows 7 and some wouldn't because the CertifiedVersions prerequisite check would come back with either 5.1 (incorrect version, but allows installation) or 6.1 (correct version, but aborts installation). How a 5.1 could get returned for the Windows 7 version number is beyond me, but that was the issue.
    The fix is that the -ignoreSysPreregs flag doesn't help in the product-specific prerequisites section. You need to specify the -ignorePrereq flag as the article shows instead - however if you run setup -help that flag isn't listed as an option! I do thank you very much for ending my frustration.

  • How to Install Oracle 10g in Windows 7 Home premium 64bit operating system

    Hi,
    I am using Windows 7 Home premium 64bit operating system. While i was installing oracle 10g i got error and not able to install. How to install the Oracle 10g databse on this operating system. Is there any patch to install this or i have to use other version of oracle with window 7 operating system?
    Thanks in advance
    Mayank Adhikari

    The argument would be who wants to install Oracle database on Windows 7. I think most probably by the developers who wants to "Try" something prior deal with a production database, right?
    For a developer, installing database using the hack is more than NOT having a local database running from the local system. I installed all the products mentioned with windows7bugs post and used the following tools to successfully connect and retrive data from the database instances.
    Toad 9.7.x.x
    SQL Developer
    SQL/Plus
    Developer 6i (Another hack, please check this link http://windows7bugs.wordpress.com/2010/03/01/installing-oracle-developer-forms-reports-6i-on-windows-7-64bit/).
    I think the discussion about whether all the features of client/server are still available with such a hacked installation is meaningless as far the information requested was strictly for Windows 7, not for a Server OS.
    regards,

  • Installing oracle 10g on windows vista business

    will i be able to install oracle 10g on Windows Vista business? Please respond me.

    Oracle 10.2.0.3 is certified on Vista
    http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html

  • Installation of oracle 10gR2 on Windows Vista Home Premium 64 bit OS

    can we install oracle 10gR2 on Windows Vista Home Premium 64 bit OS ???
    While doing sqlplus from command prompt,
    it's giving error like
    'SP2-1503 Unable to initialise Oracle Call interface'
    'SP2-0152 Oracle may not be functioning Properly'
    How to troubleshoot the above errors,
    Has anybody tried it ???
    Plz assist.

    No Oracle product is certified against any Windows Home OS.
    As Vista was released after Oracle 10gR2, 10gR2 is not certified against any edition of Vista.
    You need to downgrade to XP, or install Linux.
    Sybrand Bakker
    Senior Oracle DBA

  • TNS 12549 error on installing Oracle 10g on Windows XP Home?

    Hi,
    I installed Oracle 10g on Windows XP Home by clicking on Disk1\install\setup (NOT Disk1\setup as instructed since that did not work). Everything seemed to go fine except towards the end of the install I got a whole bunch of errors saying that "operating system resource quota exceeded". There were options to Ignore or Abort at most of these stages. I chose Ignore and the whole install seemed to complete but I am not able to connect to the database using sqlPlus. I looked at the log files created where I saw a whole bunch of errors in several files. For example in sqlnet log, I saw this error (among others) appeneded below. It seems obvious that some resource quotas were exceeded but I am not able to figure out exactly what quotas should be increased. Any help regarding this would be greatly appreciated.
    Thanks.
    Sudip
    ===================================================
    Fatal NI connect error 12549, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleorcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=CHAKRABORTY-04)(USER=Owner))))
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.2.0 - Production
    Time: 13-MAR-2005 18:03:25
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12549
    TNS-12549: TNS:operating system resource quota exceeded
    ns secondary err code: 12560
    nt main err code: 519
    TNS-00519: Operating system resource quota exceeded
    nt secondary err code: 8
    nt OS err code: 0
    ===================================================

    XP Home is not supported, despite of this some people get oracle to work.
    But in your case, possibly your machine has simply not enough resources, 12549 is a very generic error. Check the hardware requirements in the installation guide.

  • Can we install oracle 10g in windows vista

    hi all
    i am trying to install oracle 10g in windows vista ultimate ,
    but it is not getting install in windows vista
    wat is the version i have to use for windows vista ultimate ,
    thank in advance

    Hi,
    you can also check certification from http://support.oracle.com ---> certifications.
    and read below thread.
    http://forums.oracle.com/forums/thread.jspa?threadID=445907&tstart=0

  • Install Oracle 11g on windows 7 Home Premium?

    All,
    I'm trying to install Oracle 11g on windows 7 home premium edition? Is there any one installed successfully?

    >
    I'm trying to install Oracle 11g on windows 7 home premium edition? Is there any one installed successfully?
    >
    Do you have any specific issues with your installation? I don't see why you shouldn't be able to install Oracle 11g on Windows 7. Found a quick blog post for you:
    http://mgrvinod.wordpress.com/2011/05/23/oracle11g-r2-on-windows7-home-premium-64bit/

  • Error Installing Oracle 10g on Windows Vista

    I have just bought new Laptop with Intel Core Solo Processor U1500 (1.33 Ghz) and 1Gb Ram, and Windows Vista Business Edition.
    When I ran Oracle 10g Enterprise Edition Setup on my laptop, setup asked for Administrative Password and then Unknown Error Occured, any idea what could be the problem ?
    Regards,
    Luqman

    You didn't mention if you have Vista Home Premium or Vista Home Basic. Whether Vista is 32-bit or 64-bit version. Nor did you mention which version of oracle software you downloaded and used to install.
    I have installed Oracle 10g Enterprise on Windows Vista Home Premium 32-bit. It does work. However, I downloaded and used the version of Vista 32-bit.
    So, did you use the version of Windows Vista 32-bit or not?
    What is the error message?
    People can not help you unless you tell use the error message.

  • Problem installing 10g in Windows vista home premium

    Hi ALL
    I trying to install oracle 10g server in Windows vista home premium. but when i am installing, after first screen it is poping up a message of Abnormal program termination "Abnormal program termination.An internal error has occured.Please provide following files to Oracel support.'Unknown',Unknown','Unknown' ".After seeing the message if i continue installation, installation completes, but when i am clicking SQL*plus, no SQL*plus window is opening.
    Can anyone help what is hapening in installation
    Thnaks in adavance
    Sas

    Pl see this link
    Stuck while intalling Oracle 10g
    This issue has been discussed many times on these forums - pl use the search feature.
    HTH
    Srini

  • Installing Officejet 4315v on Windows Vista Home Premium will not install with/without disc.

    I have Windows Vista Home Premium S.P.1, having difficulty installing my  Officejet 4315v.   My HP computer died and I replaced with this one. I wasn't have problems until just recently. I tried running the disc I have but it just says 98,2000,XP, CD version 6.0a. It would not install. I went to web site and followed instructions. It downloaded  but installing keeps saying to "RE-TRY"!   I need this All in one very much, it has been so good and easy to use. HELP!!

    Hi
    Try to install the following driver
    AIO_CDB_Full_Non-Network_enu_NB.exe
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Install error #1620 PrPro Windows Vista Home Premium

    Install error 1620  when attempting to install CS4 "This installation package could not be opened"  (for each component of the software package).   Windows Vista Home Premium 32 bit, Intel i7 processor.   Unable to install any components of PrPro.  This is after a clean install of Vista Home Premium (part number x12-24171-01)with discs provided by microsoft.

    I would never install a new OS over the top of what is there... wipe/format the hard drive and install fresh
    Also, if you have a 64bit computer with more than 4Gig of ram, think about the 64bit version of Win7
    CS4 can't use more than about 3Gig of ram, but if the OS can use more to run better... that is what I would do
    Just be aware that you should still run CS4 in WinXP compatibility mode, as I posted before
    Also read the article below... I have NOT done this, but it seems to be an easy process
    http://windowssecrets.com/newsletter/clean-install-windows-7-from-the-upgrade-disc/

  • Installing Flash Player with Windows Vista Home Premium

    I'm trying to install Flash Player on an older system running Windows Vista Home Premium. Do I need an older version of Flash Player?

    Actually, unlike Adobe Reader, Flash Player is officially supported on Vista: http://www.adobe.com/products/flashplayer/tech-specs.html

  • Not able to install  Oracle 10g Express on linux 64bit based on Dude's intr

    I followed "https://forums.oracle.com/forums/thread.jspa?threadID=2200434" to install oracle 10g xe on Ubuntu 10.10 AMD 64-bit
    but I ran into below error while I was trying to install 10g XE on linux 64bit
    root@vdevluxcnhz0021:~# dpkg -i force-architecture libaio_0.3.104-1_i386.deb   --------- this step is error
    dpkg: warning: overriding problem because --force enabled:
    package architecture (i386) does not match system (amd64)
    dpkg: regarding libaio_0.3.104-1_i386.deb containing libaio:
    libaio1 conflicts with libaio
    libaio (version 0.3.104-1) is to be installed.
    dpkg: error processing libaio_0.3.104-1_i386.deb (--install):
    conflicting packages - not installing libaio
    Errors were encountered while processing:
    libaio_0.3.104-1_i386.deb
    Linux version
    root@vdevluxcnhz0021:~# cat /etc/issue
    Ubuntu 10.04.2 LTS \n \l
    root@vdevluxcnhz0021:~# cat /proc/version
    Linux version 2.6.32-28-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 23:57:16 UTC 2011
    Can you please help on this?
    Thanks
    Edited by: user1997872 on Jan 4, 2012 7:07 AM

    It looks like you will have to uninstall "libaio1", but I don't know for sure and don't have Ubuntu 10.4 available right now to play with.
    Sorry but the instructions are for Ubuntu 10.10, not 10.4, which is different.
    If you need to install XE on Ubuntu, I'd rather suggest 11gR2 XE:
    Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
    Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
    Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 how-to
    Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto

Maybe you are looking for

  • How to convert the date format 'm/d/yyyy hh:mi:ss AM' to 'MM/DD/YYYY HH:M'

    How can i convert a the date format 'm/d/yyyy hh:mi:ss AM' to 'MM/DD/YYYY HH:MI:SS AM' in Oracle I have a query select UPPER(t.val_10) "TYPE", count(val_3) "Number of Transfers" from table1 t where t.is_active = 1 and t.val_4 = 'INBOUND' and to_date(

  • Ipod not recognised after upgrading to iTunes 11.2.2

    I upgraded ITunes to version 11.2.2 yesterday afternoon and have tried to update my ipod classic this morning.The ipod is not recognised in ITunes nor does it appear in My Computer. My partner has plugged in her Ipod nano and this is not recognised e

  • Reports of leading & non -leading ledgers are not matching

    Reports of leading & non-leading ledgers are not matching in the trial balance report from t.code S_PL0_86000030 . Both should be matched but not matching. Leading ledger report has been taken by giving the data (Currency:10, Company code: IN06, Ledg

  • How to display BMP image.

    Hai I have a problem in displaying bmp image and I came to know that BMP format is not supported by java se 1.4. How can i display the image? OR Is there any third party tool (open source) that can solve my problem Thank you

  • Essbase 11.1.2.2.0 installation issue

    I have x64 windows 2008 server configure for essbase 11.1.2.2 installation, I add my domain user accout into local administrator group, then download all 7 files from edelivery, unzip them into one folder, then click on InstallTool, however I got the