Not able to install oracle DB 11.2.0.2 on Linux
Hi,
I tried installing Oracle DB 11.2.0.2 on RHEL 5.2, 5.5 and 6.0 but all the times, I am getting an error saying
"/tmp/database/install/.oui: cannot execute binary file"
The Kernel version for RHEL 6.0 is 2.6.32.71. Both the zip files were extracted appropriately. This is causing a lot of havoc. Please suggest a suitable solution for this.
Your immediate reply will be highly appreciated.
Yes, I have downloaded the correct package. Its a 64 bit Linux and have followed all the pre-requisites from the link http://docs.oracle.com/cd/E11882_01/install.112/e24326/toc.htm
All the package versions are the latest and none of the steps have been missed. I am running this in a VM and on standard Intel Server(not IBM Server). Hence, please help me outI'll assume you haven't posted the full error message, which is possibly why others like Ed are pointing at a different direction. I still think you are running into an issue mentioned in other threads (e. g. {message:id=9543783}, as referenced by Helios above) and MOS (e. g. 980695.1), where this message is usually generated by the runInstaller wrapper when some platform dependent requirements are not fulfilled.
Could you please post the complete command (including its base path) you execute to run the installer and the output of the following commands mentioned (equally or similarly) in the installation guide
uname -a
cat /proc/version
/sbin/sysctl -a |grep -v net.
ulimit -Sn
ulimit -Hn
ulimit -Su
ulimit -Hu
ulimit -Ss
ulimit -HsAnd did you configure the xhost properly? You can't run the graphical installer without X-Server...
-Udo
Similar Messages
-
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode1344675 wrote:
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode
Why is your "requirement" to install in graphical mode? Once you are past the installation itself, the only thing that buys you is that your server will have been configured to boot up to runlevel 5, running a graphical desktop (gnome or kde, I forget which). And what does THAT buy you on a server?
I do not run ANY of my Linux servers "in graphical mode" -- running a graphical desktop. Nor did I run a graphical desktop when I had Solaris, AIX, or HP-UX servers. -
Not able to install oracle 10.2.0.4
we are trying to install SAP ERP 6.0 SR3 with oracle 10.2.0.4 on windows server 2008 R2 enterprise, but we are get getting some error
The dump number for oracle was 51036975.
We are not able to install oracle.
Can any one find me a solution for this problemRAVITEJA8192 wrote:
we are trying to install SAP ERP 6.0 SR3 with oracle 10.2.0.4 on windows server 2008 R2 enterprise, but we are get getting some error
What was the error ?
Thanks -
Not able to install oracle fial over software
Hi all,
This is SAP Evironment
SAP : ECC6.0
OS : WIN2003
ORACLE : 10g
I am not able to install Oracle failover software.
I saw in note 986758
Change the last line of the script sapofs.cmd from the temporary
directory of
@"%rootdir%\install\setup.exe"
to
@"%rootdir%\install\setup.exe" -jreLoc=
c:\TEMP\OUIIA64\stage\Components\
oracle.swd.jre\1.4.2.11.0\1\DataFiles
When doing so, replace the name of the directory "C:\TEMP\OUIIA64"
with the name of the temporary directory that you created during the
installation of the Oracle software database
I am not understanding what exactly this meaning.
Please anybody help me in the loop
Thanks®ards
RamakrishnaHi Ramakrishna reddy ,
Installing Oracle 10.2 on Itanium 2 systems on Windows contains the following sections.
1) the Microsoft HotFixes required for the installation and operation of the database
2)the installation of the Oracle 10gR2 database software
3) the installation of the current Oracle 10gR2 patch set
4) the installation of the Oracle FailSafe server software 3.3.4.
I guess the first 3 sections you have completed. The 4th section (installing Oracle FailSafe server) point 3 says the following
Change the last line of the script sapofs.cmd from the temporary
directory of
@"%rootdir%\install\setup.exe"
to
@"%rootdir%\install\setup.exe" -jreLoc=
c:\TEMP\OUIIA64\stage\Components\
oracle.swd.jre\1.4.2.11.0\1\DataFiles
When doing so, replace the name of the directory "C:\TEMP\OUIIA64" with the name of the temporary directory that you created during the installation of the Oracle software database in step 3.
Here the step 3 points to the section 2 (installation of the Oracle 10gR2 database software). i.e it is referring to the point 3. i.e
Create a temporary directory, for example, C:\TEMP\OUIIA64. Note
that this directory is also required for the installation of Oracle
Failsafe (see below).
You have to replace directory "c:\TEMP\OUIIA64" with what you have given as temp directory while installing Oracle 10gR2 database software.
Hope this clarifies now.
Regards,
Arun. -
Not able to install Oracle 10g on Windows Vista Home Premium
Hi All.
I bought new Laptop preinstalled with Windows vista Home premium. I tried to install Oracle 10g , but it failed.
Error: Oracle 10g doesn't support vista sp5. Should be less than sp5.
Can anybody suggest me, which version of Oracle supports Windows Vista HomePremium?hi ,
please follow up the below link,
oracle 10g r1 is not supported for vista , but you can put the vista in the xp compatible mode , and then install it...
http://www.psoug.org/reference/vista.html
regards,
Mohammed Mehraj Hussain -
Not able to install Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64
I am having issues. I get "Central Inventory is not locked" and Oracle 11g R2 just closes itself.
I had some previous installations of Oracle, but I am unsure how to get rid of them all. I already removed the registry keys associated with Oracle. Any help here?One user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap. -
Not able to install Oracle 10g Express on linux 64bit based on Dude's intr
I followed "https://forums.oracle.com/forums/thread.jspa?threadID=2200434" to install oracle 10g xe on Ubuntu 10.10 AMD 64-bit
but I ran into below error while I was trying to install 10g XE on linux 64bit
root@vdevluxcnhz0021:~# dpkg -i force-architecture libaio_0.3.104-1_i386.deb --------- this step is error
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
dpkg: regarding libaio_0.3.104-1_i386.deb containing libaio:
libaio1 conflicts with libaio
libaio (version 0.3.104-1) is to be installed.
dpkg: error processing libaio_0.3.104-1_i386.deb (--install):
conflicting packages - not installing libaio
Errors were encountered while processing:
libaio_0.3.104-1_i386.deb
Linux version
root@vdevluxcnhz0021:~# cat /etc/issue
Ubuntu 10.04.2 LTS \n \l
root@vdevluxcnhz0021:~# cat /proc/version
Linux version 2.6.32-28-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 23:57:16 UTC 2011
Can you please help on this?
Thanks
Edited by: user1997872 on Jan 4, 2012 7:07 AMIt looks like you will have to uninstall "libaio1", but I don't know for sure and don't have Ubuntu 10.4 available right now to play with.
Sorry but the instructions are for Ubuntu 10.10, not 10.4, which is different.
If you need to install XE on Ubuntu, I'd rather suggest 11gR2 XE:
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 how-to
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto -
Re: Not able to install oracle database 11.2.0.2.0 in Windows 7
Hello,
I too am facing a similar issue while installing Oracle 12c Datbaase on a Virtual box machine with Windows 2008 R2 OS Image.
Cause - Failed to access the temporary location.
Action - Ensure that the current user has required permissions to access the temporary location.
Additional Information:
- Framework setup check failed on all the nodes
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
Summary of the failed nodes
ntejani-vbox2
- Version of exectask could not be retrieved from node "ntejani-vbox2"
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
My HOst machine is windows 7 and I have allocated 4GB of physical memory and 4 Processors to the Virtual Machine.
I believe this is a decent config for Oracle 12c Database. M also logging on to this system with a Admin Rights User and invoking the Installation using this User.
Earlier I had Oracle 11g Database installed on this along with Enterprise Manager 12c Cloud Control.
Recently I wanted to upgrade to Oracle 12c Database for which my multiple upgrade attempts failed with the above error. So I thought the system might be requiring some minimum. spare on the C Drive.
I decided to go ahead with Oracle 11g De-install and further attempted to install 12c Database. However the problem still persists .
Any help and clues on how to Resolve this issue is highly appreciated.
Regards,
Nayan Tejani
+91 98333 02666Sorry missed to put across the error log. here it is from the recently failed installation
~~~
Using paramFile: E:\Oracle12cDatabase\database\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
The commandline for unzip:
E:\Oracle12cDatabase\database\install\unzip -qqqo ..\stage\Components\oracle.jdk\1.6.0.37.0\1\DataFiles/"*.jar" -d "E:\TEMP\OraInstall2013-09-04_07-16-57AM" INFO: Loading data from: jar:file:/E:/TEMP/OraInstall2013-09-04_07-16-57AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/E:/TEMP/OraInstall2013-09-04_07-16-57AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/E:/TEMP/OraInstall2013-09-04_07-16-57AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beans from Xml Bean Store. [BeanStoreName:config-data]
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:configcmds in the bean:configcmdmappings
INFO: Inventory exists: true
INFO: oraInst.loc does not exist
INFO: Gathering system details...
INFO: Registering setup bean
INFO: Building Flow
INFO: No global condition definition found.
INFO: Building the flow graph
INFO: Loaded state AutoUpdatesOptionsUI
INFO: Loaded state UpdatesListUI
INFO: Loaded state finishupdates
INFO: Building the flow graph
INFO: Loaded state prepInstall
INFO: Loaded state decideOCMInstall
INFO: Loaded state autoupdatesDecider
INFO: Loaded state preAutoUpdates
INFO: Loaded state AutoUpdatesOptionsUI
INFO: Loaded state UpdatesListUI
INFO: Loaded state supportedOSCheck
INFO: Loaded state getOCMDetails
INFO: Loaded state mtsDialog
INFO: Loaded state installOptions
INFO: Loaded state getWindowsSecureOptionDetails
INFO: Loaded state getSystemClass
INFO: Loaded state DBTypeSelectionPage
INFO: Loaded state RACDBTypeSelectionPage
INFO: Loaded state nodeSelectionPage
INFO: Loaded state upgradeValidation
INFO: Loaded state installType
INFO: Loaded state quickInstallPage
INFO: Loaded state productLanguage
INFO: Loaded state inventoryPage
INFO: Loaded state getOracleHome
INFO: Loaded state dbEdition
INFO: Loaded state configurationType
INFO: Loaded state dbIdentifier
INFO: Loaded state configurationOption
INFO: Loaded state managementOption
INFO: Loaded state storageOption
INFO: Loaded state recoveryOption
INFO: Loaded state selectASMDiskGroups
INFO: Loaded state schemaPasswordDialog
INFO: Loaded state getPrivilegedOSGroups
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state performChecks
INFO: Loaded state showSummary
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[AutoUpdatesOptionsUI]: route=NO_AUTO_UPDATES; to=supportedOSCheck
INFO: State[AutoUpdatesOptionsUI]: route=success; to=UpdatesListUI
INFO: State[DBTypeSelectionPage]: route=rac_dbcreate; to=RACDBTypeSelectionPage
INFO: State[DBTypeSelectionPage]: route=rac_no_dbcreate; to=nodeSelectionPage
INFO: State[DBTypeSelectionPage]: route=si_dbcreate; to=installType
INFO: State[DBTypeSelectionPage]: route=si_no_dbcreate; to=productLanguage
INFO: State[RACDBTypeSelectionPage]: route=admin; to=nodeSelectionPage
INFO: State[RACDBTypeSelectionPage]: route=policy; to=installType
INFO: State[UpdatesListUI]: route=success; to=supportedOSCheck
INFO: State[autoupdatesDecider]: route=AUTO_UPDATES_DISABLE; to=supportedOSCheck
INFO: State[autoupdatesDecider]: route=AUTO_UPDATES_STATE_SKIP; to=supportedOSCheck
INFO: State[autoupdatesDecider]: route=success; to=preAutoUpdates
INFO: State[configurationOption]: route=success; to=storageOption
INFO: State[configurationType]: route=success; to=dbIdentifier
INFO: State[dbEdition]: route=oraclehome_location; to=getWindowsSecureOptionDetails
INFO: State[dbIdentifier]: route=success; to=configurationOption
INFO: State[decideOCMInstall]: route=ignoreOCM; to=autoupdatesDecider
INFO: State[decideOCMInstall]: route=requireOCM; to=getOCMDetails
INFO: State[getOCMDetails]: route=success; to=mtsDialog
INFO: State[getOracleHome]: route=advanced_yes_createDB_yes; to=configurationType
INFO: State[getOracleHome]: route=advanced_yes_inventory_no; to=inventoryPage
INFO: State[getOracleHome]: route=advanced_yes_softwareDB_yes; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=advanced_yes_upgrade_yes; to=prereqExecutionDecider
INFO: State[getPrivilegedOSGroups]: route=success; to=prereqExecutionDecider
INFO: State[getSystemClass]: route=desktop_class_yes; to=getWindowsSecureOptionDetails
INFO: State[getSystemClass]: route=server_class_yes; to=DBTypeSelectionPage
INFO: State[getWindowsSecureOptionDetails]: route=basic_yes; to=quickInstallPage
INFO: State[getWindowsSecureOptionDetails]: route=desktop_class_yes; to=quickInstallPage
INFO: State[getWindowsSecureOptionDetails]: route=success; to=getOracleHome
INFO: State[installOptions]: route=advanced_yes_softwareDB_yes; to=DBTypeSelectionPage
INFO: State[installOptions]: route=migrate_yes_clusterware_no; to=upgradeValidation
INFO: State[installOptions]: route=migrate_yes_clusterware_yes; to=DBTypeSelectionPage
INFO: State[installOptions]: route=system_class; to=getSystemClass
INFO: State[installType]: route=advanced_yes; to=productLanguage
INFO: State[installType]: route=basic_yes; to=getWindowsSecureOptionDetails
INFO: State[inventoryPage]: route=advanced_yes_createDB_yes; to=configurationType
INFO: State[inventoryPage]: route=advanced_yes_softwareDB_yes; to=prereqExecutionDecider
INFO: State[inventoryPage]: route=basic_yes; to=prereqExecutionDecider
INFO: Condition of state[inventoryPage]: route=advanced_yes_createDB_yes; to=configurationType
INFO: Condition of state[inventoryPage]: route=advanced_yes_softwareDB_yes; to=prereqExecutionDecider
INFO: Condition of state[inventoryPage]: route=basic_yes; to=prereqExecutionDecider
INFO: State[managementOption]: route=success; to=recoveryOption
INFO: State[mtsDialog]: route=success; to=autoupdatesDecider
INFO: State[nodeSelectionPage]: route=create_and_configureDB; to=installType
INFO: State[nodeSelectionPage]: route=software_onlyDB; to=productLanguage
INFO: State[nodeSelectionPage]: route=upgradeDB; to=upgradeValidation
INFO: State[performChecks]: route=success; to=showSummary
INFO: State[preAutoUpdates]: route=success; to=AutoUpdatesOptionsUI
INFO: State[prepInstall]: route=DOWNLOAD_UPDATES_ONLY; to=AutoUpdatesOptionsUI
INFO: State[prepInstall]: route=success; to=decideOCMInstall
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=performChecks
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=showSummary
INFO: State[productLanguage]: route=productlanguage_yes; to=dbEdition
INFO: State[quickInstallPage]: route=basic_yes_inventory_no; to=inventoryPage
INFO: State[quickInstallPage]: route=basic_yes_inventory_yes; to=prereqExecutionDecider
INFO: State[recoveryOption]: route=asm_chosen_asm_not_present; to=schemaPasswordDialog
INFO: State[recoveryOption]: route=asm_chosen_asm_present; to=selectASMDiskGroups
INFO: State[recoveryOption]: route=asm_not_chosen; to=schemaPasswordDialog
INFO: State[schemaPasswordDialog]: route=success; to=prereqExecutionDecider
INFO: State[selectASMDiskGroups]: route=success; to=schemaPasswordDialog
INFO: State[setup]: route=success; to=finish
INFO: State[showSummary]: route=success; to=setup
INFO: State[storageOption]: route=success; to=managementOption
INFO: State[supportedOSCheck]: route=success; to=installOptions
INFO: State[upgradeValidation]: route=success; to=productLanguage
INFO: State[AutoUpdatesOptionsUI]: route=NO_AUTO_UPDATES; to=finishupdates
INFO: State[AutoUpdatesOptionsUI]: route=success; to=UpdatesListUI
INFO: State[UpdatesListUI]: route=DOWNLOAD_UPDATES_FINISHED; to=finishupdates
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Loading beanstore from a given input stream
WARNING: Unable to create xml tag for the key:CommonProgramFiles(x86)
WARNING: Unable to create xml tag for the key:ProgramFiles(x86)
INFO: Translating external format into raw format
INFO: Loading flow data beans
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:DBInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:CentralInventorySettings in the bean:DBSetupBean
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:AutoUpdatesInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:OCMSettings in the bean:DBSetupBean
INFO: Setting value for the property:WindowsSecureOptionSettings in the bean:DBSetupBean
INFO: Setting value for the property:RootConfigurationSettings in the bean:DBSetupBean
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:oracle_install_db_StorageType in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_UseFileSystemForRecovery in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_UseSamePassword in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_ConfigTabSelected in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_CharSetOption in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_InstallOptionSelected in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_managementOption in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_SuperAdminPasswords in the bean:DBInstallSettings
INFO: Setting value for the property:DBInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:CentralInventorySettings in the bean:DBSetupBean
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:AutoUpdatesInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:OCMSettings in the bean:DBSetupBean
INFO: Setting value for the property:WindowsSecureOptionSettings in the bean:DBSetupBean
INFO: Set value for bean DBSetupBean
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.InventoryUI viewId: null uiType: null]
INFO: oracle.install.ivw.common.view.InventoryUI added to View Type Registry with the key as [InventoryUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.common.view.OCMDetailsGUI viewId: OCMDetailsUI uiType: null]
INFO: oracle.install.ivw.common.view.OCMDetailsGUI added to View Type Registry with the key as [OCMDetailsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationTypeUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationTypeUI added to View Type Registry with the key as [ConfigurationTypeUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBIdentifierUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBIdentifierUI added to View Type Registry with the key as [DBIdentifierUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationOptionsUI added to View Type Registry with the key as [ConfigurationOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.StorageOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.StorageOptionsUI added to View Type Registry with the key as [StorageOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.RecoveryBackupUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.RecoveryBackupUI added to View Type Registry with the key as [RecoveryBackupUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ManagementOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ManagementOptionsUI added to View Type Registry with the key as [ManagementOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI viewId: ASMDiskGroupSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI added to View Type Registry with the key as [ASMDiskGroupSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SchemaPasswordUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.SchemaPasswordUI added to View Type Registry with the key as [SchemaPasswordUI]
INFO: Adding View[type: oracle.install.ivw.db.view.QuickInstallUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.QuickInstallUI added to View Type Registry with the key as [QuickInstallUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallOptionsUI added to View Type Registry with the key as [InstallOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.WindowsSecureOptionUI viewId: WindowsSecureOptionUI uiType: null]
INFO: oracle.install.ivw.db.view.WindowsSecureOptionUI added to View Type Registry with the key as [WindowsSecureOptionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SystemClassUI viewId: SystemClassUI uiType: null]
INFO: oracle.install.ivw.db.view.SystemClassUI added to View Type Registry with the key as [SystemClassUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallLocationUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallLocationUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBEditionGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBEditionGUI added to View Type Registry with the key as [DBEditionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.NodeSelectionUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.NodeSelectionUI added to View Type Registry with the key as [NodeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBTypeSelectionGUI viewId: DBTypeSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.DBTypeSelectionGUI added to View Type Registry with the key as [DBTypeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.RACDBTypeSelectionGUI viewId: RACDBTypeSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.RACDBTypeSelectionGUI added to View Type Registry with the key as [RACDBTypeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.FinishUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.FinishUI added to View Type Registry with the key as [FinishUI]
INFO: Adding View[type: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI added to View Type Registry with the key as [PrivilegedOSGroupsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallTypeGUI viewId: installTypeUI uiType: null]
INFO: oracle.install.ivw.db.view.InstallTypeGUI added to View Type Registry with the key as [installTypeUI]
INFO: Adding View[type: oracle.install.ivw.common.view.AutoUpdatesOptionsUI viewId: AutoUpdatesOptionsUI uiType: null]
INFO: oracle.install.ivw.common.view.AutoUpdatesOptionsUI added to View Type Registry with the key as [AutoUpdatesOptionsUI]
INFO: Adding View[type: oracle.install.ivw.common.view.UpdatesListUI viewId: UpdatesListUI uiType: null]
INFO: oracle.install.ivw.common.view.UpdatesListUI added to View Type Registry with the key as [UpdatesListUI]
INFO: Adding View[type: oracle.install.ivw.common.view.FinishUpdatesUI viewId: FinishUpdatesUI uiType: null]
INFO: oracle.install.ivw.common.view.FinishUpdatesUI added to View Type Registry with the key as [FinishUpdatesUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
AutoUpdatesInstallSettings oracle.install.ivw.common.bean.AutoUpdates
InstallSettings@78216b59
CLUSTER_NODES {}
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
CentralInventorySettings oracle.install.ivw.common.bean.CentralInve
ntorySettings@3241b635
DBInstallSettings oracle.install.ivw.db.bean.DBInstallSettin
gs@1f635484
DECLINE_SECURITY_UPDATES false
FROM_LOCATION E:\Oracle12cDatabase\database\install\../s
tage/products.xml
INSTALL_TYPE EE
MYORACLESUPPORT_PASSWORD *Protected value, not to be logged*
MYORACLESUPPORT_USERNAME
OCMSettings oracle.install.ivw.common.bean.OCMSettings
@3fd83cf4
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME NTEJANI-VBOX2
PROXY_HOST
PROXY_PORT
PROXY_PWD *Protected value, not to be logged*
PROXY_USER
RootConfigurationSettings oracle.install.ivw.common.bean.RootConfigu
rationSettings@54be8c3e
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
UNIX_GROUP_NAME
WindowsSecureOptionSettings oracle.install.ivw.common.bean.WindowsSecu
reOptionSettings@d89d7eb
b_rdbmsInstall true
oracle.install.db.isCCRAuthenticationUsed false
oracle_install_IsBuiltInAccount false
oracle_install_IsOracleServiceUserExists false
oracle_install_LaunchNetCA false
oracle_install_NoMigration false
oracle_install_OCR_PartitionLocation
oracle_install_ProductName
oracle_install_RACInstall false
oracle_install_RDBMSInstalling true
oracle_install_autoupdates_httpProxyPort 0
oracle_install_autoupdates_httpProxySettings oracle.install.ivw.common.bean.HttpProxySe
ttings@5fb7565
oracle_install_autoupdates_myOracleSupportCredentials oracle.install.ivw.common.bean.MyOracleSup
portSettings@5a0eddac
oracle_install_db_ASMSNMPUserPassword *Protected value, not to be logged*
oracle_install_db_AutoMemoryOption false
oracle_install_db_CharSetOption 3
oracle_install_db_CharacterSet
oracle_install_db_ConfigTabSelected 0
oracle_install_db_ConfigurationType &General Purpose / Transaction Processing
oracle_install_db_ConfigureAsContainerDB false
oracle_install_db_DiskGroupName
oracle_install_db_DiskGroupNameForASM
oracle_install_db_EnableAutoBackup false
oracle_install_db_InstallEdition EE
oracle_install_db_InstallOption INSTALL_DB_AND_CONFIG
oracle_install_db_InstallOptionSelected 1
oracle_install_db_InstallType EE
oracle_install_db_LaunchDBCA false
oracle_install_db_LaunchODMA false
oracle_install_db_LoadExampleSchemas false
oracle_install_db_MountPointLocation
oracle_install_db_QuickInstallOption false
oracle_install_db_RecoveryBackUpLocation
oracle_install_db_SID
oracle_install_db_ServerPoolCardinality 0
oracle_install_db_SetOracleBase false
oracle_install_db_SkipHARegistration false
oracle_install_db_StarterDatabaseType GENERAL_PURPOSE
oracle_install_db_StorageType 0
oracle_install_db_SuperAdminPasswords *Protected value, not to be logged*
oracle_install_db_SuperAdminSamePasswdForAll *Protected value, not to be logged*
oracle_install_db_SystemClass DESKTOP_CLASS
oracle_install_db_Type 1
oracle_install_db_UseFileSystemForRecovery false
oracle_install_db_UseSamePassword false
oracle_install_db_isRACOneInstall false
oracle_install_db_managementOption DEFAULT
oracle_install_db_omsPort 0
oracle_install_db_racOneServiceName
oracle_install_rootConfiguration_ExecuteRootScript false
INFO: Launching Oracle Database 12c Release 1 Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state prepInstall
INFO: Waiting for completion all forked tasks at state prepInstall
INFO: All forked task are completed at state prepInstall
INFO: Completed background operations
INFO: Executing action at state prepInstall
INFO: Completed executing action at state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prepInstall>
INFO: Completed validating view at state <prepInstall>
INFO: Validating state <prepInstall>
WARNING: Validation disabled for the state prepInstall
INFO: Completed validating state <prepInstall>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state decideOCMInstall
INFO: Completed executing action at state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <decideOCMInstall>
INFO: Completed validating view at state <decideOCMInstall>
INFO: Validating state <decideOCMInstall>
WARNING: Validation disabled for the state decideOCMInstall
INFO: Completed validating state <decideOCMInstall>
INFO: Verifying route requireOCM
INFO: Get view named [OCMDetailsUI]
INFO: View for [OCMDetailsUI] is oracle.install.ivw.common.view.OCMDetailsGUI@e235e9d
INFO: Initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOCMDetails
INFO: Completed executing action at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOCMDetails>
INFO: Completed validating view at state <getOCMDetails>
INFO: Validating state <getOCMDetails>
INFO: Completed validating state <getOCMDetails>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state mtsDialog
INFO: Completed executing action at state <mtsDialog>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <mtsDialog>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <mtsDialog>
INFO: Completed validating view at state <mtsDialog>
INFO: Validating state <mtsDialog>
INFO: Completed validating state <mtsDialog>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state autoupdatesDecider
INFO: Completed executing action at state <autoupdatesDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <autoupdatesDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <autoupdatesDecider>
INFO: Completed validating view at state <autoupdatesDecider>
INFO: Validating state <autoupdatesDecider>
WARNING: Validation disabled for the state autoupdatesDecider
INFO: Completed validating state <autoupdatesDecider>
INFO: Reading shiphome metadata from E:\Oracle12cDatabase\database\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/E:/Oracle12cDatabase/database/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.OUIMetadata from file:/E:/Oracle12cDatabase/database/install/../stage/shiphomeproperties.xml
INFO: Loading beans from Xml Bean Store. [BeanStoreName:oui-metadata]
INFO: Setting value for the property:properties in the bean:oui-metadata
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state preAutoUpdates
INFO: Completed executing action at state <preAutoUpdates>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <preAutoUpdates>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <preAutoUpdates>
INFO: Completed validating view at state <preAutoUpdates>
INFO: Validating state <preAutoUpdates>
WARNING: Validation disabled for the state preAutoUpdates
INFO: Completed validating state <preAutoUpdates>
INFO: Verifying route success
INFO: Get view named [AutoUpdatesOptionsUI]
INFO: View for [AutoUpdatesOptionsUI] is oracle.install.ivw.common.view.AutoUpdatesOptionsUI[,0,0,0x0,invalid,layout=java.awt.FlowLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=9,maximumSize=,minimumSize=,preferredSize=]
INFO: Initializing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed initializing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Displaying view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed displaying view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Loading view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed loading view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Localizing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed localizing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state AutoUpdatesOptionsUI
INFO: Completed executing action at state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <AutoUpdatesOptionsUI>
INFO: Completed validating view at state <AutoUpdatesOptionsUI>
INFO: Validating state <AutoUpdatesOptionsUI>
INFO: Completed validating state <AutoUpdatesOptionsUI>
INFO: No updates will be downloaded or applied
INFO: Verifying route NO_AUTO_UPDATES
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state supportedOSCheck
INFO: Completed executing action at state <supportedOSCheck>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <supportedOSCheck>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <supportedOSCheck>
INFO: Completed validating view at state <supportedOSCheck>
INFO: Validating state <supportedOSCheck>
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Verifying setup for installer validations
INFO: Overall status of CVU API call:OPERATION_FAILED
SEVERE: [FATAL] [INS-30131] Initial setup required for the execution of installer validations failed.
CAUSE: Failed to access the temporary location.
ACTION: Ensure that the current user has required permissions to access the temporary location.
*ADDITIONAL INFORMATION:*
- Framework setup check failed on all the nodes
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
Summary of the failed nodes
ntejani-vbox2
- Version of exectask could not be retrieved from node "ntejani-vbox2"
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
~~~ -
Not able to install Oracle 11g R2 client in windows 8 machine
Oracle universal installer window is not coming up in windows 8 machine, if any one installed Oracle 11G R2 client in windows 8. Please share those steps and if you have latest 11G client share that download link.
Thanks in advance.
Edited by: 969434 on Nov 4, 2012 10:48 PMHi;
Win 8 is not certified yet. Please use certification matrix at metalink and also check below note:
Master Note For Oracle Database Client Installation [ID 1157463.1]
Client / Server / Interoperability Support Between Different Oracle Versions [ID 207303.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios -
Database Could not able to (install Oracle 10G)
Dear all,
I had tried to install Oracle 10G using sapserver.cmd. but i didnt get dos Box even i didnt get any screen after Double click sapserver.cmd .
but if i tried this path SAPDVD/Ora_RDBMS/NT/I386/database/setup . i can install Oracle RDBMS.
I need to know whether above mentioned path is adviseable to install Oracle 10G
Kindly suggest
RegardsHi Marcus ,
I have tried from command line also. I got the below error .
D:\>cd D:\Ora_RDBMS\NT\I386
D:\Ora_RDBMS\NT\I386>sapcustom.cmd
'D:\Ora_RDBMS\NT\I386
database\install\SETUP.EXE' is not recognized as an inter
nal or external command,
operable program or batch file.
D:\Ora_RDBMS\NT\I386>sapcustom.cmd
Kindly suggest .
Regards -
Not able to install Oracle VM Server and VM Manager on the same PC?
Hi, I've installed Oracle VM Server an created a VM for Oracle VM Manager (from template). Now I want to use the Oracle VM Manager to create another VM from template. I've untared the template and stored it in /OVS/seed_pool. However, when I go to "Resources -> VirtualMachineTemplates -> Import" and try to "Select from Server Pool (Discover and register)", I cannot discover anything (there is no server pool to select)!!
I have one Server Pool containing one Oracle VM Server. Also one VM for the OracleVMManager.
I appreciate any advise.HI,
make sure you have created one sub folder before start import.
Jignesh -
Not able to install Oracle XE 10g in windows 7 64bitmachine
Hiii,
I am trying to install oracle 10g express edition on windows 7 64bit machine,after installation i shut down the database and run the startup command then it shows the error "ORA-01041 internal error.hostdef extension doesn't exist". Anybody please help me.978628 wrote:
Hiii,
I am trying to install oracle 10g express edition on windows 7 64bit machine,after installation i shut down the database and run the startup command then it shows the error "ORA-01041 internal error.hostdef extension doesn't exist". Anybody please help me.Why are you hijacking someone else's completely unrelated thread. Please read the forum FAQ before proceeding. You'll find the link in the upper right corner of this very page you are reading.
As for your question, what has your research of "ORA-01041" turned up so far? -
Not able to install Oracle 10G on AIX 5.3 64-bit system
Hi,
i have got the software in DVD i have mounted the dvd on the filesystem
/dev/cd0 ---- /mnt (mnt folder contains the software), Have done following things to install but got following errors....
#cd mnt
# ls
client companio doc index welcome.htm
clusterw database gateways index.pdx
$cd database
# ls
doc install response rootpre runinsta stage welcome.htm
#cd rootpre
loadext orclclus pw_sysc2 pw_sysc3 pw_sysca rootpre.sh
# ./rootpre.sh
Required file ./pw-syscall32 is missing.
Aborting pre-installation procedure. Installations of Oracle may fail. // wat does this mean is that file belongs to operating system or missing in the source DVD
# /mnt/database/runinsta
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should run the shell script 'rootpre.sh' be
fore
you proceed with Oracle installation. rootpre.sh can be found at the top
level
of the CD or the stage area.
Answer 'y' if root has run 'rootpre.sh' so you can proceed with Oracle
installation.
Answer 'n' to abort installation and then ask root to run 'rootpre.sh'.
Has 'rootpre.sh' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-06-04_12-20-58PM. Please wait ...
Error in writing to directory /tmp/OraInstall2007-06-04_12-20-58PM. Please ensure that this directory is writa
ble and has atleast 69 MB of disk space. Installation cannot continue.
: Error 0
//////// I checked that in tmp folder i have got more than 69MB (i have 2 Gb )
/////// also created folder /u01/app/oracle and mounted in seperate volume which has
/////// 7GB space...
# cd ..
# cd install
# ls
addnode.sh images oneclick.pro .oui response unzip
clusterp.ini lsnodes oraparam.ini resource runinsta.sh
# ./runinsta.sh
./runinsta.sh[3]: ./runInstaller: not found.
Any Help would be appreciated.... struggling to install it.
Thanks & Regards
BhanuHi,
I'm also facing some issues with respect to installation.
The oracle installer is getting started but the GUI screen is
not appearing.The installer is getting stuck with the following error
message.
INFO: Created system preferences directory in java.home".
I also tried starting utilities like xclock which is also not getting started.
Any suggestions would be really appreciated.
Regards,
Mahesh. -
Not able to install Oracle 10g on Windows 7 Ultimate
Dear Oracle Xperts,
Can anyone guide me how to go about installing on Windows 7. I downloaded the 10.2.0.3 version. Its not installaing throwing the following error.
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
Recommendation: Install the recommended Service Pack.
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 1406MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
I also installed the MS Loopback adapter.
Pls help me with any feedback
Thks and regards,
IndranilHi Srini,
Thank you very much for the direct link to that article. I've been trying to find it since Googling similar questions, all of which suggest going to My Oracle Support to get that article. Unfortunately when I went there I got prompted for contract ids or whatever, so the portal seems completely useless to the general public.
In my case, some machines would install on Windows 7 and some wouldn't because the CertifiedVersions prerequisite check would come back with either 5.1 (incorrect version, but allows installation) or 6.1 (correct version, but aborts installation). How a 5.1 could get returned for the Windows 7 version number is beyond me, but that was the issue.
The fix is that the -ignoreSysPreregs flag doesn't help in the product-specific prerequisites section. You need to specify the -ignorePrereq flag as the article shows instead - however if you run setup -help that flag isn't listed as an option! I do thank you very much for ending my frustration. -
Not able to install eBusiness Linux 32 bit version 12.0.4
I am not able to install Oracle Ebusiness linux version in my desktop. I get this error during step 2 and it stops.
Exception in thread "Thread-254" : java.lang.NoClassDefFoundError : oracle/apps/ad/util/MessageHandler
at oracle.apps.ad.rapidwiz.util.AutoConfigRunner.runDriver(AutoConfigRunner.java:231)
at oracle.apps.ad.rapidwiz.util.AutoConfigRunner.run(AutoConfigRunner.java:209)
How can I fix this issue ? Looks like the java class missing.Thanks for you information.
I have installed all the pre-requiste softwares and packages as per this link
www.oracle-base.com/articles/apps/OracleApps_12_InstallationOnOEL45.php.
installdbf.log --> exited with 0
ApplyDatabase_05130109.log --> ApplyDatabase Completed Successfully.
adconfig.log --> AutoConfig is exiting with status 0
NetServiceHandler.log --> adgentns.pl exiting with status 0
I see the following error message at the end of this log file appsutil/log/$CONTEXT_NAME/MMDDHHMM.log.
FINISHED INSTALL PHASE : DATABASE : Tue May 13 01:57:39 EDT 2008
/training/trn/oracle/TRN1/db/tech_st/10.2.0/temp/TRN1_varsha/adrundb.sh has succeeded
java.lang.NoClassDefFoundError: oracle/apps/ad/tools/configuration/NetServiceHandler
Please refer to the remaining logs on applications node at - /training/trn/oracle/TRN1/inst/apps/TRN1_varsha/logs/05130035.log
I have installed OEL4 and made the requiredchanges
Does this mean you have already installed all
pre-req. software/packages?
It completed step 1 100% and during step 2 around66%
Please review the following log files for further
details about the error:
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/installdbf.log
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/adcrdb_<SID>.l
og
<RDBMS
ORACLE_HOME>/appsutil/log$CONTEXT_NAME/ApplyDatabase_<
MMDDHHMM>.log
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>/adc
onfig.log
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>/Net
ServiceHandler.log
Maybe you are looking for
-
Well, the description states that this new version corrects several of the issues in 7 and 7.1 hmmmmm. Not true for me at all. Upon first installing the update, the same computer lockup occurs while iTunes checks for gapless playback, usually by song
-
Should I create a new catalogue ?
Hi there, I saw some youtube seminar from some top guru in Lightroom. I remember his advise was not to create a multiple catalogue and always stick to one catalogue. I intend to follow his advice but I am now face with this problem below: My 20TB Dro
-
Cubes with different dimensions based on the same fact table
I have a fact table (f_a) with three dimensions (dim_a, dim_b, dim_c) and a one measure (m_a). Is it possible to create cube with only one dimension (dim_a)? Data for other two dimensions (dim_b, dim_c) should be aggreagated together. Of course i can
-
How to place a password to turn on computer?
how do u place in password when you turn on computer?
-
Http Request through URL Connection?
Hi , Iam using an Applet (under JRE 1.3.0). Iam trying to send a Http Request using URL Connection. It is working fine . However, if the response time of the server is more than 3 minutes , the Response is not coming back to the server and the Applet