Not able to install smart print
after downloading software to activate smart print I get an error message when trying to run it. The message says "Installation package could not be opened. Contact the application vendor to verify that it is a valid Windows Installer Package
Hi poonamngr99,
What operating system are you using? Is it Windows XP?
Best Regards,
SmartPrintRUs
* Disclaimer: I am an HP employee
Similar Messages
-
Not able to install my printer on my Asus Laptop. I have the Hp OfficeJet 6400.
not able to install my printer on my Asus Laptop. I have the Hp OfficeJet 6480 and an Asus X550C running Windows 8.1. After downloading the software on HP's site nothing happens after it downloads and does the extract process. The installer just dissapears. If I try to uninstall it, I get a message saying that it's running and cannot ininstall. I've tried the Print and scan doctor as well as the Installation wizard. Also disabled firewalls .... nothing works
This question was solved.
View Solution.It turned out to be a corrupted .dat file in the windows directory. Removed it and problem solved!
dw -
I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!
I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!
-
Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards. -
Why am i not able to install creative cloud?
Why am i not able to install creative cloud? i paid for the package, downloaded the installer now its been trying to connect to the server since a day..
You can check these :
Creative Cloud Connection Update
Sign in, activation, or connection errors | CS5.5 and later
CreativeCloud Manager can't connect to Internet
Regards
Rajshree -
Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO
I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued -
not able to install onedrive for business, keeps telling its already installed but its not (W7)
after a change of the 365 office version OneDrive for business it is not possible to reinstall the software
it keeps telling me it is already installed.
I think some settings are still there from the old install.
how can I remove them or force the reinstallyeah finally
Problem solved! , my tube is back to normal ( to rock )
all i did is , removed the sys,private,system,resources,data folders from the memory card , switched off my phone , removed the memory card , did a soft reset (*#7370#) and tried to install an application from downloads , i was able to install in the phone memory as memmory card was not inserted then switched off the phone , inserted the memory card and tried to install an application from the downloads, finally i was asked where to install the app. and gave memory card , viola application installed sucessfully
Regards,
evil_night13 -
not able to install itunes in windows 7. Whwn I am installng setup the error displayed as "Service 'Apple Mobile Device' failed to start Verify that you have sufficient privileges to start system services" and when i ignore this message and continue with installation of itunes and open the installed itunes in laptop it gaian shows the error "iTunes was not installed correctly. Please reinstall iTunes Error7(Windows Error 14001)". Please provide me some solution.
Please give me some solution on above issue.....
-
Not able to install SQL server on windows 7 - Installation halts during pre-installation.
Hi Team,
Am not able to install SQL Server on my windows. i have checked several links and sites. But nothing helped. Following is captured in the boot strap logs.
2014-09-19 12:31:48 Slp: Running Action: StartSqmSession
2014-09-19 12:31:48 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-09-19 12:31:48 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
2014-09-19 12:31:48 Slp: Sco: Attempting to get registry value CustomerFeedback
2014-09-19 12:31:48 Slp: SQM is opted-out by command line parameter /SQMREPORTING or registry key setting, SQM session is closed
2014-09-19 12:31:48 Slp: Completed Action: StartSqmSession, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: ValidateSettingsAgainstScenario
2014-09-19 12:31:48 Slp: Scenario: RunRules
2014-09-19 12:31:48 Slp: Completed Action: ValidateSettingsAgainstScenario, returned True
2014-09-19 12:31:48 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: RunDiscoveryAction
2014-09-19 12:31:48 Slp: Running discovery on local machine
2014-09-19 12:31:48 Slp: Discovery on local machine is complete
2014-09-19 12:31:48 Slp: Completed Action: RunDiscoveryAction, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: DiscoverClusterData
2014-09-19 12:31:48 Slp: Completed Action: DiscoverClusterData, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: RunStandaloneRules
2014-09-19 12:31:48 Slp: Running in UI mode, unattended rules execution skipped.
2014-09-19 12:31:48 Slp: Completed Action: RunStandaloneRules, returned True
2014-09-19 12:31:48 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:48 Slp: Running Action: RunRulesUI
2014-09-19 12:31:48 Slp: Start Action: RunRulesUI
2014-09-19 12:31:48 Slp: Configuration file: D:\Setup\SQL2008_R2\Standard Edition\x64\configuration.uicfg
2014-09-19 12:31:48 Slp: Adding registration information 'ShowWizard' for type 'Microsoft.SqlServer.Management.ActionHandlerInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'InstallWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'InstallClusterWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'AddNode' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RemoveNode' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'PrepareClusterWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'CompleteClusterWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'UninstallWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'UpgradeWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'ComponentUpdate' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RepairWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RunRulesUI' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'EditionUpgradeWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'PatchWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'RemovePatchWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'PrepareImageWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:48 Slp: Adding registration information 'CompleteImageWizard' for type 'Microsoft.SqlServer.Management.ActionInfo'
2014-09-19 12:31:49 Slp: Rules to be checked: OsVersionCheck;ThreadHasAdminPrivilegeCheck;RebootRequiredCheck;WmiServiceStateCheck;AclPermissionsFacet;MediaPathLength;SetupCompatibilityCheck
2014-09-19 12:31:49 Slp: If any rule does not pass, setup can still continue: True
2014-09-19 12:31:49 Slp: Adding rule result notification channel: RulesEngineNotificationChannel
2014-09-19 12:31:49 Slp: Loading rule: OsVersionCheck
2014-09-19 12:31:49 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetOsInfo
2014-09-19 12:31:49 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: ThreadHasAdminPrivilegeCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetAdminCheck
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: RebootRequiredCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetRebootRequired
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: WmiServiceStateCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.WmiServiceInfo
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: AclPermissionsFacet
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.AclPermissionsFacet
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: MediaPathLength
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.MediaPathLenghtFacet
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Loading rule: SetupCompatibilityCheck
2014-09-19 12:31:50 Slp: Creating rule target object: Microsoft.SqlServer.Configuration.SetupExtension.SetupCompatibilityCheck
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Executing rules engine...
2014-09-19 12:31:50 Slp: Completed Action: RunRulesUI, returned True
2014-09-19 12:31:50 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:50 Slp: Running Action: GatherUserSettings
2014-09-19 12:31:50 Slp: Start rule execution, total number of rules loaded: 7
2014-09-19 12:31:50 Slp: Initializing rule : Minimum operating system version
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetOsInfo
2014-09-19 12:31:50 Slp: Rule 'OsVersionCheck' detection result: major=6, minor=1, SP=1
2014-09-19 12:31:50 Slp: Evaluating rule : OsVersionCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The operating system version meets the minimum requirements for this product.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Setup administrator
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetAdminCheck
2014-09-19 12:31:50 Slp: Rule 'ThreadHasAdminPrivilegeCheck' Result: Running thread has administrator privilege.
2014-09-19 12:31:50 Slp: Evaluating rule : ThreadHasAdminPrivilegeCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The account running SQL Server Setup has administator rights on the computer.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Restart computer
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.FacetRebootRequired
2014-09-19 12:31:50 Slp: Rule 'RebootRequiredCheck' results: IsRebootNotRequired=True
2014-09-19 12:31:50 Slp: Evaluating rule : RebootRequiredCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The computer does not require a restart.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Windows Management Instrumentation (WMI) service
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.WmiServiceInfo
2014-09-19 12:31:50 Slp: Rule 'WmiServiceStateCheck' detection result: WMI Service is running
2014-09-19 12:31:50 Slp: Evaluating rule : WmiServiceStateCheck
2014-09-19 12:31:50 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:50 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:50 Slp: Rule evaluation message: The Windows Management Instrumentation (WMI) service is running.
2014-09-19 12:31:50 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:50 Slp: Initializing rule : Consistency validation for SQL Server registry keys
2014-09-19 12:31:50 Slp: Rule applied features : ALL
2014-09-19 12:31:50 Slp: Rule is will be executed : True
2014-09-19 12:31:50 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.AclPermissionsFacet
2014-09-19 12:31:50 Slp: Launching external tool: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x64.exe
2014-09-19 12:31:50 Slp: ------------------------------------------------------------
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer\Client - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer\Client\SuperSocketNetLib - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\MSSQLServer\Client\SuperSocketNetLib\LastConnect - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\10.50 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap\Setup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\1033 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\1033\CurrentVersion - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\CurrentVersion - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Bootstrap R2\MSIRefCount - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\ConfigurationState - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools\ClientSetup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools\Shortcut - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\100\Tools\Shortcut\SQL Server Installation Center R2 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Setup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER1 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSRS10_50.MSSQLSERVER1\Setup - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount\SqlRsFx0150 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount\SqlSupport10R2 - OK.
2014-09-19 12:31:50 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\RefCount\sql_ssms - OK.
2014-09-19 12:31:50 Slp: ------------------------------------------------------------
2014-09-19 12:31:50 Slp: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x64.exe exit code: 0
2014-09-19 12:31:50 Slp: Launching external tool: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x86.exe
2014-09-19 12:31:50 Slp: ------------------------------------------------------------
2014-09-19 12:31:51 Slp: ------------------------------------------------------------
2014-09-19 12:31:51 Slp: D:\Setup\SQL2008_R2\Standard Edition\x64\FixSqlRegistryKey_x86.exe exit code: 0
2014-09-19 12:31:51 Slp: Rule 'AclPermissionsFacet' detection result: AreSqlAclPermissionsCanonical= True
2014-09-19 12:31:51 Slp: Evaluating rule : AclPermissionsFacet
2014-09-19 12:31:51 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:51 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:51 Slp: Rule evaluation message: SQL Server registry keys are consistent and can support SQL Server installation or upgrade.
2014-09-19 12:31:51 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:51 Slp: Initializing rule : Long path names to files on SQL Server installation media
2014-09-19 12:31:51 Slp: Rule applied features : ALL
2014-09-19 12:31:51 Slp: Rule is will be executed : True
2014-09-19 12:31:51 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.MediaPathLenghtFacet
2014-09-19 12:31:51 Slp: Rule 'MediaPathLength' INSTALLMEDIAPATH length is 47
2014-09-19 12:31:51 Slp: Evaluating rule : MediaPathLength
2014-09-19 12:31:51 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:51 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:51 Slp: Rule evaluation message: The SQL Server installation media is not too long.
2014-09-19 12:31:51 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:51 Slp: Initializing rule : SQL Server Setup Product Incompatibility
2014-09-19 12:31:51 Slp: Rule applied features : ALL
2014-09-19 12:31:51 Slp: Rule is will be executed : True
2014-09-19 12:31:51 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.SetupCompatibilityCheck
2014-09-19 12:31:51 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-09-19 12:31:51 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\100\Bootstrap\Incompatibilities
2014-09-19 12:31:51 Slp: Searching for reg path SOFTWARE\Microsoft\Microsoft SQL Server\100\Bootstrap\Incompatibilities. Open subkey result is False
2014-09-19 12:31:51 Slp: Regkey not present. No incompatibilities
2014-09-19 12:31:51 Slp: Incompatibility detected = False
2014-09-19 12:31:51 Slp: Evaluating rule : SetupCompatibilityCheck
2014-09-19 12:31:51 Slp: Rule running on machine: J1018165WIN7LT
2014-09-19 12:31:51 Slp: Rule evaluation done : Succeeded
2014-09-19 12:31:51 Slp: Rule evaluation message: Setup has not detected any incompatibilities.
2014-09-19 12:31:51 Slp: Send result to channel : RulesEngineNotificationChannel
2014-09-19 12:31:51 Slp: Saving results to datastore...
2014-09-19 12:31:51 Slp: Saved to directory.......C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\SystemConfigurationCheck_Report.htm
2014-09-19 12:31:51 Slp: Sco: Attempting to create directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources
2014-09-19 12:31:51 Slp: Sco: Attempting to create directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources, security descriptor
2014-09-19 12:31:51 Slp: Sco: Attempting to set directory full path
2014-09-19 12:31:51 Slp: Sco: Attempting to normalize directory path C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources
2014-09-19 12:31:51 Slp: Sco: Directory 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources' already exists, skipping creation, moving to set security descriptor.
2014-09-19 12:31:51 Slp: Sco: Attempting to set security descriptor for directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources, security descriptor
2014-09-19 12:31:51 Slp: Sco: Attempting to check if directory C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\resources exists
2014-09-19 12:31:51 Slp: Sco: SDDL is NULL/empty and overwriteSecurityDescriptor is false, so nothing to do, return.
2014-09-19 12:31:51 Slp: Generating HTML report by applying XsltTransformation and saving to Log folder...
2014-09-19 12:31:51 Slp: Rules evaluation report is available now at C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\SystemConfigurationCheck_Report.htm
2014-09-19 12:31:54 Slp: Completed Action: GatherUserSettings, returned True
2014-09-19 12:31:54 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:54 Slp: Running Action: Progress
2014-09-19 12:31:54 Slp: Completed Action: Progress, returned True
2014-09-19 12:31:54 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:54 Slp: Running Action: Close
2014-09-19 12:31:54 Slp: Stop Action
2014-09-19 12:31:54 Slp: Completed Action: Close, returned True
2014-09-19 12:31:55 Slp:
2014-09-19 12:31:55 Slp:
2014-09-19 12:31:55 Slp: ----------------------------------------------------------------------
2014-09-19 12:31:55 Slp:
2014-09-19 12:31:55 Slp: Setup result: 0Hi,
Iam try to install Microsoft SQL Server 2008 R2 on Windows 7.
Following is the contents from summary file.
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Exit message: Passed
Start time: 2014-09-19 12:31:55
End time: 2014-09-19 12:32:16
Requested action: ComponentUpdate
Machine Properties:
Machine name: J1018165WIN7LT
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\Setup\SQL2008_R2\Standard Edition\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: ComponentUpdate
CONFIGURATIONFILE:
ENU: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
PASSPHRASE: *****
PID: *****
QUIET: False
QUIETSIMPLE: False
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140919_123143\SystemConfigurationCheck_Report.htm -
Garageband was not able to install the new sounds
I'm on an iMac 21.5-inch (mid 2011) running Yosemite; 2.5 GHz Intel Core i5; 4GB memory.
A few months ago, I uninstalled GarageBand. Now I'm trying to reinstall it. I can get GarageBand 6 reinstalled, but I would like to get working with the latest version. I'm able to download the latest version from the App Store with no issue. It installs with no issue.
When I open it, it thanks for me downloading it, and then begins to download "an essential collection of sounds and loops." After a bit of downloading, it asks for my admin password; I enter it, and a few seconds later, it gives the error: "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again." Closing and reopening GarageBand just takes me through the same loop (no pun intended). When the window is open, if I click on the GarageBand menu in the Apple bar, nothing happens.
It does not ask me to accept anything; I am signed into the App Store with the same Apple ID I have always used (it is the only one I have ever had, so that's not the issue). I am an admin on my Mac, so it's not a permissions issue. It's not a password issue either.
Things I have tried:
Rebooting into Safe Boot and opening from there; same issue.
Repaired permissions (it fixed oodles of things completely unrelated to GarageBand); same issue.
Creating a new admin profile and opening from there; it gives a different error, but the effect is the same.
Removed the program, trashed anything remotely related to GarageBand (preferences, folders, etc), emptied the trash, restarted the computer, reinstalled; same issue.
Installed GarageBand on top of itself, just in case; same issue.
I can't think of what else to try. Help!
For reference, here is a screenshot of what I'm getting stuck on:The solution Lijoesat posted above worked for me!
First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
I tried to empty the trash bin after but many files was locked and Garageband would still not install.
I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
The inserted picture show some of the folder structure, I deleted everything after private/var/folders/ -
HP Notebook - 15-ac043tu - NOT ABLE TO INSTALL WIFI DRIVERS FOR WINDOWS 7 -64 BIT
I baught HP Notebook - 15-ac043tu. I am not able to install wifi drivers in windows 7 home edition . I have downloaded all drivers from HP Link shown below, http://support.hp.com/in-en/drivers/selfservice/hp-15-ac000-notebook-pc-series/7771404/model/8326116#Z7_3054ICK0K8UDA0AQC11TA930C7 Can anyone help me ?
Hi I am facing a similar issue,Last week I bought my friend this Hp Notebook 15 (15-ac043TU) with DOS, I installed Win8 (64bit) and tried installing drivers from 'http://support.hp.com/, but its not accepting the WLAN drivers, I tried many, available for this model for win7 as well as for win8.1, wondering there was no win8 option, however it should work for Win8, I also followed your suggest but got the same error - "Update.cpp 1205" If you need Hardware Id, on 'Network Controller' - properties in devices manager, it is -PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 Thank you and Regards:Gagan
-
Not able to install Windows 8.1 Update for x64-based Systems (KB2919355)
My laptop is dell vostro 1014.I have upgraded my laptop to windows 8.1 pro.I am not able to install Windows 8.1 Update for x64-based Systems (KB2919355)I got the following errors from windows event viewer:
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Internet Explorer 11 for Windows 8.1 for x64-based Systems (KB2964444) without KB2919355.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Windows 8.1 Update for x64-based Systems (KB2919355).
Anyone knows how to fix this error?
If I run the Reset Windows Update Components, I get this:Hi,
Considering that the security app or third part service may block the installation, please try the clean boot to install this update manually:
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue still persists, please upload the cbs.log under
%WinDir%\Logs\CBS\CBS.log into Onedrive or similar network drive and share the link here.
Kate Li
TechNet Community Support -
Not able to install Intellisync on Windows Mobile 6.1
Hi
We have got GMS 3.0.1 running on Linux and GW 8.0.2.
On my HTC Touch Diamond (Windows Mobile 6.1) I am not able to install Intellisync. I'm sending the Intellisync_setup (Microsoft Smartphone OS-Devices) via SMS. On my mobile device I tried either opening the link directly (default opens with Opera Mobile) or pasting it into Internet Explorer. In Opera is shown a message that the certificate of the server does not fit to the hostname. But certificate and hostname are exactly the same. It is a self-issued certificate by the way. I click on the accept button and select "Windows Mobile Smartpone" from the list. Then I select install on device. Installation starts... In the middle of "downloading package ..." I get: "Install Error: Connection problem. Please try again later, or contact your system administrator." After confirming with OK the installation window closes. I reboot the mobile device and there is the Intellisync Install window where I can enter server and credentials. After entering the servername and credentials I get the message: "A secure connection could not be established. Check your connection settings, or contact your system administrator" --> Ok --> "Authentication failed. Please try again." --> OK.
If I enter the same servername with https and same credentials over Opera or Internet Explorer I can access the GMS without any problems.
Have you got any ideas?
Thank you in advance for your help
pixel73Originally Posted by pixel73
Thanks for your suggestions.
I tried that already. But the installation process can't be finished. I am always stuck at the "Intellisync Install" window where I enter the server name and my credentials. After clicking on the connect button I always get the following three messages:
"A secure connection could not be established. Check your connection settings, or contact your system administrator."
"Connection problem. Please try again later, or contact your system administrator."
"Authentication failed. Please try again."
Now on GMS I changed the following options and rebooted afterwards:
"Enforce SSLv3 connection and a minimum 64-bit key" --> to NO
"Server Key Length" --> to 1'024
I again performed a hard reset on my HTC.
None of all that helped.
Could it be a problem with the mobile services provider?
I'm tempted to say to recheck the certificate you are using. Has this been working before?
Could be the CN on the certificate does not have the full dn (e.g. server.domain.com)? -
Not able to Install MS SQL 2008 R2 64 -Bit
Hi All,
I am Installing fresh Setup Of MSSQL 2008 R2 On my Server (Microsoft Server 2008 R2 Standard SP1 64 Bit ) which is domain Controlled. But With Administrative rights I am not able to Install. it shows Following error ,
POLICY .8.0.Microsoft.VC80.MFC Version ="8.0.50727.1833",public key token = "1fc8b3b9a1e18e3b",processor architecture ="X86",type "win32-policy"
I found lot of solutions in google search bit still the problem doesn't solves.
Please guide me for the same
Thanks
AshishI am Installing fresh Setup Of MSSQL 2008 R2 On my Server (Microsoft Server 2008 R2 Standard SP1 64 Bit ) which is domain Controlled. But With Administrative rights I am not able to Install.
Its not recommended to install SQl Server on domain controller if you are building SQL Server setup for production purpose or even UAT testing its not recommended. Although you can proceed on your own risk MS will not be responsible for any issue arising
out of it.
Now can you please post Summary.txt file generated after failed installation. Its location would be
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Not able to install eBusiness Linux 32 bit version 12.0.4
I am not able to install Oracle Ebusiness linux version in my desktop. I get this error during step 2 and it stops.
Exception in thread "Thread-254" : java.lang.NoClassDefFoundError : oracle/apps/ad/util/MessageHandler
at oracle.apps.ad.rapidwiz.util.AutoConfigRunner.runDriver(AutoConfigRunner.java:231)
at oracle.apps.ad.rapidwiz.util.AutoConfigRunner.run(AutoConfigRunner.java:209)
How can I fix this issue ? Looks like the java class missing.Thanks for you information.
I have installed all the pre-requiste softwares and packages as per this link
www.oracle-base.com/articles/apps/OracleApps_12_InstallationOnOEL45.php.
installdbf.log --> exited with 0
ApplyDatabase_05130109.log --> ApplyDatabase Completed Successfully.
adconfig.log --> AutoConfig is exiting with status 0
NetServiceHandler.log --> adgentns.pl exiting with status 0
I see the following error message at the end of this log file appsutil/log/$CONTEXT_NAME/MMDDHHMM.log.
FINISHED INSTALL PHASE : DATABASE : Tue May 13 01:57:39 EDT 2008
/training/trn/oracle/TRN1/db/tech_st/10.2.0/temp/TRN1_varsha/adrundb.sh has succeeded
java.lang.NoClassDefFoundError: oracle/apps/ad/tools/configuration/NetServiceHandler
Please refer to the remaining logs on applications node at - /training/trn/oracle/TRN1/inst/apps/TRN1_varsha/logs/05130035.log
I have installed OEL4 and made the requiredchanges
Does this mean you have already installed all
pre-req. software/packages?
It completed step 1 100% and during step 2 around66%
Please review the following log files for further
details about the error:
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/installdbf.log
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/adcrdb_<SID>.l
og
<RDBMS
ORACLE_HOME>/appsutil/log$CONTEXT_NAME/ApplyDatabase_<
MMDDHHMM>.log
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>/adc
onfig.log
<RDBMS
ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>/Net
ServiceHandler.log
Maybe you are looking for
-
This morning, I had my fully charged 5th gen iPod touch. Have had lots of problems with it since updating to iOS8. After briefly using it (successfully may I add), I switched it off to standby. Came back only 10 minutes later, and it would not tur
-
Flag "SEPA mandate required" (XSEPA) not editable
Hello everyone, we would like to set the parameter "SEPA mandate required" (XSEPA) for some countries and payment methods (transaction FBZP), but this flag is grayed out and can't be selected: How is it possible to edit this filed? Thank you in advan
-
Placing clients in untrusted after log off of AS SSO
I have a L3 OOB NAC deployment with AD SSO. Users are mapped to different roles depending on OU membership and then to different VLANs. What happens is that if a user with a certain role logs on to a client and is palced in his VLAN, say VLAN10, and
-
Ipad won't play itunes radio in the car, help
my ipad 3 is running IOS 7 and used to play itunes radio via the cars sound system, it doesnt play anymore. Is this due to the version of IOS?
-
I am trying to print out a simple, single picture as a 4x6 glossy print. I have checked all setting in LR and for printer (e.g. paper size, orientation, margins) and still get a wide white border with a shrunken version of my image scaled and center