Not able to install studio + controller on windows server 2012 r2

Hi,
i have installed windows server 2012 R2, now i want to install windows HCK 2.1 with controller + studio option but i am not able to install because that option is grey. what additional settings i have to do in order to successfully installation
of WHCK. please guide me.
ankur dubey

Hi, see the
Windows HCK Getting Started.
Note:
Controller isn't supported on Windows Server 2003, Windows Server 2008, Windows Vista®, Windows XP, or Windows 2000.
Controller isn't supported on an installation that has already been set up as a domain controller.
Controller isn't supported in a virtual PC or any third-party Hypervisor environment.
Greetings
Nino
...esistono i motori di ricerca, facci un salto e troverai molte delle risposte che ti darò io.

Similar Messages

Not able to inistall Sharepoint 2013 on windows server 2012 r2

Hi ,
I am trying to install Sharepoint enterprise 2013 on windows 2012 r2. In very early stage i got issue when i ran prerequisite installer.
As we all know in this case we need to install prerequisite manually. I downloaded all the prerequisite and installed them manually. I have enabled all web and application role. then followed below link and installed all the prerequisite
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
SQL Server 2008 R2 SP1 Native
Client
Microsoft
WCF Data Services 5.0
Microsoft Information Protection
and Control Client (MSIPC)
Microsoft Sync Framework Runtime
v1.0 SP1 (x64)
Windows
Identity Extensions
Windows
Identity Foundation (KB974405)
Windows
Server AppFabric
CU
1 for AppFabric 1.1 (KB2671763)
All got installed correctly on server validated from control panel then i restarted the server and Ran SharePoint Set up
But still facing issue attached in form of image
Please help me on this.
kirtesh

Hi kirtesh,
According to your description, my understanding is that you got an error when you ran prerequisite installer.
Please make sure the Windows Server Features and Role services are enabled in your SharePoint server.
Start > All Programs > Administrative Tools > Server Manager->Add Roles and Features:
i. Application Server
ii. File Services
iii. Web Server (IIS)
Best Regards,
Wendy
Wendy Li
TechNet Community Support

HP Notebook - 15-ac043tu - NOT ABLE TO INSTALL WIFI DRIVERS FOR WINDOWS 7 -64 BIT

I baught HP Notebook - 15-ac043tu. I am not able to install wifi drivers in windows 7 home edition . I have downloaded all drivers from HP Link shown below, http://support.hp.com/in-en/drivers/selfservice/hp-15-ac000-notebook-pc-series/7771404/model/8326116#Z7_3054ICK0K8UDA0AQC11TA930C7 Can anyone help me ?

Hi I am facing a similar issue,Last week I bought my friend this Hp Notebook 15 (15-ac043TU) with DOS, I installed Win8 (64bit) and tried installing drivers from 'http://support.hp.com/, but its not accepting the WLAN drivers, I tried many, available for this model for win7 as well as for win8.1, wondering there was no win8 option, however it should work for Win8, I also followed your suggest but got the same error - "Update.cpp 1205" If you need Hardware Id, on 'Network Controller' - properties in devices manager, it is -PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 Thank you and Regards:Gagan

Not able to install own Plugin in Windows 7 Ultimate,Latest Firefox

Not able to install own Plugin in Windows 7 Ultimate,Latest Firefox. Please provide any RDF changes i need to do for installing on Windows 7 Ultimate.Latest Firefox

Hi raazb4u:
Have a look at this for starters:
https://developer.mozilla.org/en/Extension_Versioning,_Update_and_Compatibility
Let me know, if this is already known to you and does not adress the problem. I'll then go and check deeper, if necessary.
Regards
smo

I am not able to install itunes in my Windows 7 PC

I am not able to install itunes in my Windows 7 PC

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.

Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
From windows server 2012 and windows server 2008, Opened port 20,21,22 in firewall bidirectionally. After Establishing connection by passing credentials 230 log in successful.
ftp commands executing getting as " 425 Use Port or PASV first" , "500 Illegal PORT command".
But I could able to do windows client machines like windows 7 and windows 8 with same environment
Note : Firewall ports are opened. have tested by making firewall down to avoid filters.
Pandiyan Muthuraman

Hi Pandiyan Muthuraman,
Did you mean even you disable or open the related port the FTP issue still exist? I found this errors most time occur when we use the ISA firewall and the FTP configured passive
mode, if you have ISA firewall please refer the following KB to fix this issue.
How to enable passive CERN FTP connections through ISA Server 2000, 2004, or 2006
http://support.microsoft.com/kb/300641
The have a specific form for the IIS question, if you have the further IIS related question you can ask in IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Not able to install Bea Weblogic RFID Edge Server in solaris10

Hi,
I am not able to install Bea Weblogic RFID Edge Server. I gave all permissions to that file.
$ ./rfid_edge220_solaris32.bin
./rfid_edge220_solaris32.bin: cannot execute
Could you please tell me the solution to resolve this issue

Hi,
I am not able to install Bea Weblogic RFID
Edge Server. I gave all permissions to that file.
$ ./rfid_edge220_solaris32.bin
./rfid_edge220_solaris32.bin: cannot execute
Could you please tell me the solution to resolve this
issueWhat is the output of " file fid_edge220_solaris32.bin".

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

I am not able to install itunes in my windows XP computer because it does not have service pack 3. what can I do?

Dear friends,
I want to transfer files between my windows XP computer and my Ipad4. I am not able to install itunes on my computer because it does not have service pack 3. What can be done? Please help?

Have you tried installing Service Pack 3 ? You should be able to try installing it via Windows Update in the windows start menu

Windows Domain Controller on Windows Server 2012 R2: Hyper-V roaming profiles not loading due to slow connection

I have racked my brain and done everything that I know to do for about two weeks now. I am setting up a new system at our fire department and I am having the worst luck with getting the workstations to login to the domain controller with roaming
profiles. It keeps telling me that the roaming profile could not be loaded because of a slow connection. These are workstations that are connected directly to the switch that the DC is connected to. I have tried multiple connections regarding
the layout (DC into the router, router into the switch). The router is a Cisco RV220W. I have two VLANS, one for public and one for private domain. The Private VLAN has DHCP turned off since I am providing it through the DC. I currently
have a connection from the Private VLAN going to the unmanaged switch that the workstations and server are plugged into.
The server is a Dell PowerEdge R420 that has 6 NIC ports (1 dual port and 1 quad port). I have a virtual switch setup on Hyper-V for an external port (let's say Card 2 Port 3) that is assigned to the WS 2012R2 Domain Controller. The DC can see
the internet fine and the workstations can connect to the shared folders on the server. I can retrieve files by just using the computer name or FQDN. The DC is also running DNS and DHCP. The DNS has the _msdcs setup from when I installed
the active directory role. I have attempted to assign static IP addresses to the workstations:
IP:                     10.0.0.80
Subnet:             255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS:        10.0.0.12
I've attempted "append the specific DNS suffix", I've "registered the connection in DNS", I've used "use this connections suffix in DNS registration".
The server is assigned:
IP:                     10.0.0.12
Subnet:             255.255.255.0
IPV4 Gateway: 10.0.0.1
IPV4 DNS:         10.0.0.12
The DNS entries have forwarders that forward to my ISP DNS servers for lookup
I've enabled and disabled DHCP, I've installed a new VM just to create another DC to make sure that I didn't goof up when I created it.
I've lost my patience with this project and am sinking fast. Can someone please offer some advice as to what I've done wrong? I've created this exact scenario at work many times but, I've never done it with Windows Server 2012. Is this
possibly something to do with the Dell PowerEdge server (Generation 12) with the SR-IOV? I am going to attempt to work on it some more tomorrow when I get over there. I think there may be an issue with the SR-IOV not being enabled on the machine
through the Dell Bios. Would the SR-IOV really cause the workstations to report a slow connection? When I login at the domain controller the roaming profiles and folder redirection work fine so, I know the GPO settings are correct. I don't
have "ignore slow connections" or any of those GPO's set. I need to get it working the correct way so, I didn't want to fool the server when there is another underlying problem. Any help that someone can offer, I am more than willing
to listen. If you need more information, please ask.
Thanks,
Jay

So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now.

Not able to change product key in windows server using SLui command

I have installed windows server 2012 r2datacenter and when I am trying to insert the product key using slui 3 command (in run windows),I am getting an error code as
0x80070003(The system cannot find
the path specified error)
I have tried running sfc/scannow as well but it did not work.
Kindly help me .

Hi Ashish,
Would you please let me confirm whether want to
change the product key or activate the Windows Server 2012 R2 Datacenter? Just a confirmation, thanks for your understanding.
Please use the
Volume Activation Management Tool (VAMT) and check if help you to change the product key.
In addition, please
run the
Microsoft Genuine Diagnostics Tool and check if find more relevant clues.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Sharepoint 2013 - Error installing pre-requisite on Windows Server 2012 R2

I have been trying to get my Sharepoint 2013 installed on windows server 2012 R2. I was never able to get past the pre-requisite installer. It keeps failing at "Configuring Application Server Role, Web Server (IIS) Role" and was never able to get
past that.
In the last 3 days i tried almost all of the suggestions posted in various forums but was never able to get it work. Any insight in to this error and resolution is greatly appreciated.
Tried all things explained here but didn't work
KrisS

I voted for the SharePoint 2013 isn't supported yet link. I spent 4 hours resolving the issue. In my installation, there were many claims by the installer that the application server role is corrupt or unavailable. I dove deep into the installer files and
found 1 file that was not in the correct place. I am not going to mention it, because it is the reason the installer should fail.
Downloading and installing sharepoint 2013 sp1 was the answer. Why? Because Windows Server 2012 R2 was my operating system. Windows Server 2012 R2 was not a supported type of installation for SharePoint 2013 until SharePoint 2013 SP1 was released.
I hope this helps those whom have ben in dire need. Even though Paul was initially correct in his statement, the release of SharePoint 2013 sp1 opens doors.
@Microsoft, as a former PFE I think you could have done better.

Unable to Install Oracle 12 on Windows Server 2012 R2

Hello:
I have attemted several times to install Oracle 12c Release 1 on a Windows 2012 R2 server but it fails during the Net Configuration phase. I've the log file but I am not able to dicern anything of value from it.
Any help will be appreciated.
Venki

user9023421 wrote:
Srini:
As per Oracle Database Quick Installation PDF, " Windows Server 2012 x64 - Standard, Datacenter, Essentials, and Foundation editions" is supported.
venki
This is for R1, not R2
Which version are you installing on ? R2 is currently not a certified OS
HTH
Srini

Upgrade a Domain Controller running Windows Server 2012 Datacenter Eval

Hello,
because I couldn't wait for Server 2012 to show up on Dreamspark Premium I installed the Datacenter evaluation version after I found this blog
post telling me, I could simply enter my key when I get it to upgrade to the full version.
After entering the command I get notified that "Changing this Windows edition is not supported online for a domain controller.".
The TechNet article for upgrading evaluation versions states the following:
"If the server is a domain controller, see http://technet.microsoft.com/library/hh472160.aspx for important steps to follow before proceeding."
and taking me to an article for installing/uninstalling ADDS without further comments.
Simply typing "slui 3" and entering my key states that I have to enter an eval key.
My question is: Is there a painless way to upgrade my 2012 DC without losing my AD config?
Regards,
Hans

Hi,
Please refer to the following Microsoft TechNet article to confirm if the steps of converting to full retail version are correct.
Evaluation Versions and Upgrade Options for Windows Server 2012
http://technet.microsoft.com/en-us/library/jj574204.aspx
If the warning persists, it means Windows Server 2012 Domain Controller does not support such convert. If so, please install another Windows Server 2012 full retail version or
convert to full retail version and then promote it to an additional Domain Controller for this domain. After that, transfer FSMOs to this new Domain Controller and demote the original Domain Controller.
Regards,
Arthur Li
TechNet Community Support

Install sharepoint 2013 on Windows server 2012, Microsoft Identity Extensions issue !!!!!!!!!

Sharepoint 2013 comes with prerequisitesinstaller.exe to install the software required for the actual Sharepoint installation.
I 've installed Windows server 2012 in the R2 edition as well as Standard edition, but installing the prerequisites ends with an issue for the Microsoft Identity Extensions (MIE) on both versions (screenshot).
The 2012 R2 server has been updated with all latest files by executing Windows update.
In case of the Server 2012 R2, MIE is already installed , but somehow the Sharepoint installation is missing something.
I al;so tried removing default install to let prerequisiteinstaller.exe to install it's own version, but that did not help.
When I skip the prerequisites remaining items, the Sharepoint installation stops directly , requesting the missing items.
I've tried several Sharepoint server installation files, including the 180 days free version.
Screenshots will be uploaded after my account has been checked......

Hi Jay,
Installing SharePoint Server 2013 on a computer that is running Windows Server 2012 R2 could lead to unexpected behavior, therefore, Microsoft does not support SharePoint Server 2013 in Windows Server 2012 R2.
SharePoint Server 2013 with Service Pack 1 and SharePoint Foundation 2013 with Service Pack 1 will offer support for Windows Server 2012 R2.
Refer to:
SharePoint 2013 Support for Windows Server 2012 R2
In addition, as Dave suggested, for the sharepoint server issue, please post in the dedicated forum for a better response.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Not able to install studio + controller on windows server 2012 r2

Similar Messages

Maybe you are looking for