Not able to install/update HP dc7600 video driver - getting blurry/shadowy/ghosting display

Dear HP Windows XP Specialists, I am having difficulty fixing a blurry/shadowy/ghosting display screen (HP 19inch monitor) on a HP dc7600 SFF (2.99 GHz, 1.0 GB RAM) Desktop PC, which runs Windows XP Professional. It has been working fine for many years until yesterday, where I have replaced the monitor with another working one that works for half a day.I have updated the Chipset SP38488 and Video driver SP37615 but ended up with the following error which I don’t believe it is correct: “This computer does not meet minimum requirements for installing the software. Setup will exit” The problem is Windows XP kept prompting to install video driver after every reboot, and the driver it is looking for is SP37615. Allow it search through a Windows XP installation disk did not work either. It doesn’t or allows me to use standard video driver either. The only idea left is to add more RAM, but find it hard to believe since the display driver (not clear which one that was), has been working without the need to add more RAM. The part and serial numbers for this PC are PU700AV and AUD6110155 respectively. Any advice to assist would be very much appreciated.Thanks in advance,Jack

Hi: According to the specs I found online for the product number for your PC, it has the onboard Intel graphics. See if the XP driver directly from Intel works for you...this was the final release. https://downloadcenter.intel.com/download/16835/Intel-Graphics-Media-Accelerator-Driver-for-Windows-XP-exe-

Similar Messages

TS1702 i am not able to install update or remove itunes and install newer versions, windows installer service cannot be accessed,

i am not able to install update or remove itunes and install newer versions,
its stops installing and a windows error is shown
i e :: windows installer service could not be accessed , this could occur if you are running windows installer in safe mode
or windows installer service is not correctly installed
the same error happens if i try to uninstall the itunes from the control panel- remove programmes option
im using windows 7 home basic 64 bit version
this eroor is not happening with any other programmes..
can someone tell me how to solve this issue
thanx
tushar

Reinstalling iTunes is really daunting task. See
http://www.apple.com/support/iphone/assistant/itunes/#section_6

I am not able to install updates on my Mac Air laptop. IT says The document "Firefox 6.0.1.dmg" could not be opened. Adobe Flash Player Install Manager cannot open files in the "Disk Image" format.

i have not been able to install updates on this laptop ever.

umjustme wrote:
curious to know your reservations about Kapersky!
They screwed up the first Flashback removal tool very badly, locking several users out of their accounts permanently. It took a day or so for them to react and post a revised tool, but the damage had been done.
They are one of several formerly PC only vendors who rushed to the Mac front back in the spring after the Flashback scare. I would advise giving all of those folks time to prove they really understand OS X before installing it on any of my Macs. There are several others who have proven themselves.
Since you are running what I assume to be a fully up-to-date OS X 10.6.8 you are not vulnerable to any currently known malware capable of impacting OS X or other Mac software. That's no guarantee there won't be something new show up tomorrow, but the chances of any commercial anti-malware software catching it before Apple can react is pretty slim, IMHO.
Now if you are concerned about Windows malware, that's a different story.

HT1925 I am not able to install updates for itunes every time I try to install it says unable to install becasue a network program cannot be found (iTune. MSI

the iTunes upate fails everytime I try to update ,,,,,messages says not able to find source on the network ...iTunes.MSI I have tried to download manually still fails

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Not able to install updates

hi
my compuetr shows me available updates, yet after trying to install I'm receiving error message
it's about adobe reader and iTunes
any clues?

got it:
version: 10.6.8
more info:
Model Name:          iMac
Model Identifier:          iMac9,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM91.008D.B08
SMC Version (system):          1.45f0

I am not able to install application. i am getting that it requires IOS 4.3

I am not able to install any application. I am getting pop saying it requires iOS 4.3. But when i tr to upgrade my touch to 4.3 from 4.2.1, it says its running on latest iOS. Please help. Is my touch is waste now as apple don't support. Please help

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Not able to install Essabse Excel Add in

Hi
I've installed and configured the Hyperion 11.1.2.1 on my Server Window 208 Rs 64 bit server. The Essbase Excel add in was not installed. So am trying to install ti manually. But am not able to do that. Am getting an error saying that the path that is given is not correct. Please help me out of this
Thanks in advance

You say that you are not able to install the add-in and you get an issue in installing the Excel Add-in. Do you get the error mentioned when you try to install it?
Once the Excel add-in is installed you need to register it. Hence Register the Spreadsheet Add-in.
If you are getting error while opening Excel try the following --
1. Close Excel
2. Unregister Spreadsheet Add-in, select Start, then Programs, then Oracle EPM System, then Essbase, then Essbase Client, and then Unregister Spreadsheet Add-in.
3. Register Spreadsheet Add-in, select Start, then Programs, then Oracle EPM System, then Essbase, then Essbase Client, and then Register Spreadsheet Add-in.
4. Launch Excel and then check.
Regards,
HyperEPM

Not able to install Windows 8.1 Update for x64-based Systems (KB2919355)

My laptop is dell vostro 1014.I have upgraded my laptop to windows 8.1 pro.I am not able to install Windows 8.1 Update for x64-based Systems (KB2919355)I got the following errors from windows event viewer:
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Internet Explorer 11 for Windows 8.1 for x64-based Systems (KB2964444) without KB2919355.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Windows 8.1 Update for x64-based Systems (KB2919355).
Anyone knows how to fix this error?
If I run the Reset Windows Update Components, I get this:

Hi,
Considering that the security app or third part service may block the installation, please try the clean boot to install this update manually:
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue still persists, please upload the cbs.log under
%WinDir%\Logs\CBS\CBS.log into Onedrive or similar network drive and share the link here.
Kate Li
TechNet Community Support

Not able to install sccm agent in sccm 2012 servers after cu3 update

not able to install sccm agent in sccm 2012 servers after cu3 update
MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002 ,below URl specify fix to uninstall Management point ,but in sccm 2012 secondary site canot unintall management point ,please help to install agent in config manager servers
https://blogs.technet.com/b/configurationmgr/archive/2013/11/25/hotfix-quot-error-25150-setup-was-unable-to-register-the-ccm-service-hostingconfiguration-endpoint-quot-when-you-try-to-install-the-client-agent-in-configuration-manager.aspx
ankith

Excellent Article!!!!!! Pls check here, Follow the same steps
http://eskonr.com/2013/09/sccm-configmgr-2012-sp1-cu3-installationcollections-upgrade-clients/
This too
http://it.peikkoluola.net/2013/11/18/update-sccm-2012-to-sp1-cu3/
Thanks, Prabha G

TS1702 I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3. However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via e

I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3.
However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via email.
Installation was rejected because I need the iOS.4.3
Thanks for your help
Michael

That situation went from inconvenient to complicated quickly. Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled. I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned. Sorry this happened the way it did. Definitely not efficient.

I am not able to install quick time after i deleted it accidentaly

I am not able to install quick time, after when i deleted it accidentaly. Actually it was installing but i am not able to see the icon in applications

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful it won't install normally.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Why am i not able to install creative cloud?

Why am i not able to install creative cloud? i paid for the package, downloaded the installer now its been trying to connect to the server since a day..

You can check these :
Creative Cloud Connection Update
Sign in, activation, or connection errors | CS5.5 and later
CreativeCloud Manager can't connect to Internet
Regards
Rajshree

Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO

I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??

Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued

HP Notebook - 15-ac043tu - NOT ABLE TO INSTALL WIFI DRIVERS FOR WINDOWS 7 -64 BIT

I baught HP Notebook - 15-ac043tu. I am not able to install wifi drivers in windows 7 home edition . I have downloaded all drivers from HP Link shown below, http://support.hp.com/in-en/drivers/selfservice/hp-15-ac000-notebook-pc-series/7771404/model/8326116#Z7_3054ICK0K8UDA0AQC11TA930C7 Can anyone help me ?

Hi I am facing a similar issue,Last week I bought my friend this Hp Notebook 15 (15-ac043TU) with DOS, I installed Win8 (64bit) and tried installing drivers from 'http://support.hp.com/, but its not accepting the WLAN drivers, I tried many, available for this model for win7 as well as for win8.1, wondering there was no win8 option, however it should work for Win8, I also followed your suggest but got the same error - "Update.cpp 1205" If you need Hardware Id, on 'Network Controller' - properties in devices manager, it is -PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 Thank you and Regards:Gagan

We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode

We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode

1344675 wrote:
We could not able to install Oracle Linux 64 bit version 5.0 in graphical mode. We are getting the error message as
"Probing for video card :Intel corporation Unknown device 0152"
We also tried as
boot: Linux vga=2
boot linux resolution 1024x768
boot Linux noprob
boot Linux skipdd
But every time we got this message
NB: We could able to install in text mode as
boot: Linux text.
But our requirement Linux in graphical mode
Why is your "requirement" to install in graphical mode? Once you are past the installation itself, the only thing that buys you is that your server will have been configured to boot up to runlevel 5, running a graphical desktop (gnome or kde, I forget which). And what does THAT buy you on a server?
I do not run ANY of my Linux servers "in graphical mode" -- running a graphical desktop. Nor did I run a graphical desktop when I had Solaris, AIX, or HP-UX servers.

Not able to install/update HP dc7600 video driver - getting blurry/shadowy/ghosting display

Similar Messages

Maybe you are looking for