Not able to link any user while running the scheduler
Hi,
I have written a scheduler to reconcile the data into OIM. While running the scheduler my users are able to get linked to any user. Though Modification of the existing users are happening and scheduler is running without any error.
Please help me in resolving this issue.
Regards
Did you set your reconciliation action rules and reconciliation rule? After, did you create a reconciliation profile?
-Kevin
Similar Messages
-
All Browsers not able to open any Website while able to Ping all Websites but after restart server web sites are able to open for 5 to 10 minutes only.
Please Suggest me a solution.Hi, we miss some information;
- do you use a proxy ?
- can you provide an ipconfig /all please
- do you use any firewall product that could block the computer on port 80
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it! -
my phone has just gone dead need to revive my phone, someone calling me can hear the dailer tone but i am not able to hear any ring, kindly suggest. the monitor is all blank
Thank you so much you really hepled, my phone is working again phew!!!
-
Link Button disappears while running the application
Hi All,
In one of my User Defined Forms i've added a link button and i've given the properties like Linkto,Link Object and all.In Preview mode it is available.But while i run the application,it is not available .Any body please help me to resolve this issue
Regards
GibiHi Gibi,
Form Freeze mode stops you from seeing any updates on the screen (to prevent the flickering effect) until you unfreeze it.
The linked button will only display once the field has been filled and the form is "un frozen".
hth
Regards
Tinus -
should i reset or what i have very imp data in it so can u advise me what to do
actually am not able to save them on my i phone , I actually deleted the folder which appears when we connect the I phone to the windows system (photo transfer without I tunes) I tried to restore it with I tunes and it started working but I loaded the backup the problem continued , one of my friend is also facing the same problem
-
Plz help in liking my account with the apple store Because I am not able to download anything from apple store
Have you called your credit card issuer? They may be able to provide a reason for the declined purchased.
Also, you can only register for and use the App Store in the country your credit card is issued. Be sure you are buying apps from the correct App Store. -
OIM 11g error while running the scheduler
Hi All,
we have created on few custom schedulers to carry out trustetd recon and doing the create , modify and delete operations on OIM entities. all were running fine earlier. Now we started facing the below error while running any scheduler. Please find the OIM diagonostic logs below.
scheduler status is not changing to running and scheduler logs and events r also not getting generated. please find the logs below.
2012-09-04T11:03:38.355+05:30] [oim_server1] [NOTIFICATION] [IAM-0080006] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] Orchestration process moved to failed stage, and the corresponding error is - {0}[[
oracle.iam.platform.kernel.EventFailedException: Operation - UNSCHEDULE that is submitted as part of the orchestration is not supported.
Completed orchestration with action result - oracle.iam.platform.kernel.EventFailedException: Operation - UNSCHEDULE that is submitted as part of the orchestration is not supported.
[2012-09-04T11:03:38.430+05:30] [oim_server1] [NOTIFICATION] [IAM-1010010] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] ********** Entering the Authorization Segment with parameters:: LoggedInUserId = 1, target resourceID = null, Feature = SCHEDULER, Action = JOB_MODIFY **********
[2012-09-04T11:03:38.430+05:30] [oim_server1] [NOTIFICATION] [IAM-1010029] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] OES Results found in cache with Key F: SCHEDULERS: 1P: JOB_MODIFYOESDefinition
[2012-09-04T11:03:38.431+05:30] [oim_server1] [NOTIFICATION] [IAM-1010021] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] Validating the Internal Obligations: [InternalObligation: name: noop, values: [true], convertToObligation: false, InternalObligation: name: noop, values: [true], convertToObligation: false]
[2012-09-04T11:03:38.431+05:30] [oim_server1] [NOTIFICATION] [IAM-1010022] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] ---------- The list of Internal Obligation is satisfied, returning TRUE ----------
[2012-09-04T11:03:38.431+05:30] [oim_server1] [NOTIFICATION] [IAM-1010026] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] ********** Exiting the Authorization Segment with result Decision :PERMIT[[
Obligations from policy: **********
[2012-09-04T11:03:38.598+05:30] [oim_server1] [NOTIFICATION] [IAM-0080013] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] Kernel executing default validation with process id, event id, entity and operation 709,251.0.JobDetails.UPDATE
[2012-09-04T11:03:38.875+05:30] [oim_server1] [NOTIFICATION] [IAM-0080014] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] Kernel executing default action handler with process id, event id, entity and operation 709,251.2,295,568.JobDetails.UPDATE.entityId=null
[2012-09-04T11:03:38.875+05:30] [oim_server1] [NOTIFICATION] [IAM-0080001] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 11d1def534ea1be0:5b04d370:1398fc0c0cc:-8000-0000000000000067,0] [APP: oim#11.1.1.3.0] An error occurred while executing the kernel event handler.[[
oracle.iam.platform.kernel.EventFailedException: Operation - UPDATE that is submitted as part of the orchestration is not supported.
at oracle.iam.platform.kernel.impl.EntityDefaultActionHandler.execute(EntityDefaultActionHandler.java:53)
thanks.I got one similar issue before. In my case was with event handler. It was a sintax issue.
Example:
I wrote this: <action-handler Class="...
instead of this: <action-handler class="...
So, in your case III suggest you to check if have any plugin invalid syntax and re-import your schedule task plugin.
<oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<plugins pluginpoint=.....
<plugin pluginclass= .....
</plugin>
Let me know if you have any doubt.
I hope this helps,
Thiago Leoncio. -
Problem while running the scheduled jobs?
Hi any body know the reasons for this?
1) one job got cancelled with error "ABAP/4 processor: SPOOL_INVALID_JOB,
log:
"The current ABAP program had to be terminated because the ABAP processor detected an internal system error.
The current ABAP program "RSPPFPROCESS" had to be terminated because the ABAP processor discovered an invalid system state."
2) second job got cancelled with error "system exception ERROR_MESSAGE UNCAUGHT_EXCEPTION CX_OS_DB_UPDATE seems there is some problem in updating the table PPFSTRIGG". but PPFSTRIGG is not table it is structure.
when next execution of these jobs there r working fine.
no runtime errorshi prakash ramu,
even it is not working. it is directly talking me to spool request..
i think it is not possible, while ur running the report in background.,
any how if possible could u pls send me the code...
thanks
ramu -
I have been looking for solutions, but no luck. Any help in getting this resolved would really help.
I am currently reinstalling TCS5.1, as this recently happened to me as well...
If you initially installed Rh and Fm from the TCS installer, not from Fm and Rh installers, the linking should work.
I had projects I was working on, and then overnight, without any updates, etc., both my client and I lost the ability to update existing linked projects.
I wondered if it was an Adobe server issue, but another member of the client team seemed unaffected.
I'll try to update this post if when I resolve the issue. -
Not able to serach for competencies while creating the COmpetency assessmen
Hi,
I am trying to create a competency assessment template and while doing so I have to select competencies.
I am facing an issue where it keeps erroring "please enter a serach criteria" though I enter 2 search criteria atleast.Also if I select the COmpetency type it works fine.
Secondly how is the data populated in per-competen_elements table?
I created the competency by entering the details on the competency form as a local competency..Is there any other details to be enetered?Hi user,
It's a good idea to check the include job competences checkbox when creating your competency template.
If you want competences to be appraised, you should use the "Competence Requirements" screen. You can find it if you login as Global Super HRMS Manager, then under the "Career Management" group.
Here you can select the position you want to create competences for and these will show up when the appraisal is published. You can choose to end date a competency if you don't want it to show up in the next appraisal.
So basically, if you enter the competency for a position using the Competency Requirements screen, it will show up in the per_competence_elements table -
Not able to see any firewire units on the bus overview.
I just bought my second Mini, it had been used by the outlet during a promotion campaign, so I had to restore the OS.
Everything looked fine, but there are two problems I am left with:
Firstly, the FireWire 800 interface seems almost dead. By that I mean, there is power on the bus, but no communication. On the FireWire info page I only get a warning in red letters saying "Warning: Could not list FireWire units". Of course, it does not matter what I connect.
The other issue I experience is that after booting the Mini, it takes 10 to 15 minutes before I am able to have response on keyboard and mouse input.
Any suggestions out there what could be the matter?Thanx kbrosnan. Enter key will work if my keyboard is Google Keyboard but if i have another keyboard type (C-DAC, GIST Marathi Keyboard) then if I press enter key it will take special invisible character may be carriage return and not getting expected action. Using same C-DAC keyboard I am able to get expected action in another application. So is that browser problem of keyboard problem?
Ref C-DAC Keyboard: http://cdac.in/english/down/gist/android_soft_keyboard_marathi.aspx -
Not able to see full output when run in backgroun
This is a continuation of my question I previously asked:
I was trying to write a simple list with lot of headings.
For example:
WRITE: /6 'TitleA', 29 'TitleB', 55 'TitleC', 80 'TitleD', 106 'TitleE',
131 'TitleF', 157 'TitleG', 172 'TitleH', 198 'TitleI'.(it goes upto 400 characters)
I could not see the list titles after a particular length. So, I adjusted the settings to more than 255 in the report title and yes I can see the full output now. But I can not see the full output (and not able to print full) when I run the report in background.
So what can I do to see (and able to print) the full output even when I run in background or normal mode? I think there should be some solution for this.
Thanks.Hi,
Execute this report with spool number. this program will increase the width of the spool.it is SAP utility program.
Laxman
*& Report Y_SPOOL_WIDTH_INCRESE *
REPORT y_spool_width_increse LINE-SIZE 80. .
This is a SAP utility report to allow display of
spool request lists with more than 255 columns in
releases 4.6B and 4.6C (4.6D kernel must be used)
PARAMETERS: rqident LIKE tsp01-rqident,
firstl TYPE i DEFAULT 0,
lastl TYPE i DEFAULT 0.
global data from LSPOXTOP
DATA: rc(10) TYPE c,
errmsg(100) TYPE c,
status LIKE sy-subrc,
dsn_type(8) TYPE c.
DATA: BEGIN OF data_set_line,
data_length(5),
precol(1),
DATA_LINE(1000),
data_line(5000), "MODAB
END OF data_set_line,
data_set_length(5) TYPE c.
TABLES: tsp01, tst05, tspoptions.
DATA: temse_name LIKE tst01-dname,
temse_client LIKE tst01-dclient,
temse_handle LIKE rststype-handle,
temse_part LIKE tst01-dpart,
temse_objtyp LIKE tst01-dtype,
temse_rectyp LIKE rststype-rectyp,
temse_charco LIKE tst01-dcharcod.
DATA: is_otf.
global data from LSPOCTOP
DATA: BEGIN OF spoc
, escape
, prtctrl
, first_bytes(4) " collection of the first bytes of the
" escape sequences, which I am searching for.
, prtctrl_start_length TYPE i
, prtctrl_total_length TYPE i
, prtctrl_start(10)
, symbol_low_start(10)
, symbol_hgh_start(10)
, symbol_start_length TYPE i
, icon_start(10)
, icon_start_length TYPE i
, icon_sel TYPE i VALUE 1
, frame_start(10)
, frame_start_length TYPE i
, END OF spoc.
FIELD-SYMBOLS: TYPE c
copied from RSPO_DISPLAY_ABAP_SPOOLJOB
DATA: buffer LIKE data_set_line OCCURS 1000.
TABLES: tsp02l.
SELECT SINGLE * FROM tsp01 WHERE rqident = rqident.
IF sy-subrc <> 0.
WRITE: / 'Spool request does not exist:'(001), rqident.
EXIT.
ENDIF.
CALL FUNCTION 'RSPO_CHECK_JOB_PERMISSION'
EXPORTING
access = 'DISP'
spoolreq = tsp01
EXCEPTIONS
no_permission = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE: / 'No authorization to display'(002).
EXIT.
ENDIF.
PERFORM read_data TABLES buffer
USING tsp01 firstl lastl.
IF sy-subrc <> 0.
WRITE: / 'Error reading spoolo request'(003).
EXIT.
ENDIF.
IF is_otf = 'X'.
WRITE: / 'This spool request is not an ABAP list'(004).
EXIT.
ENDIF.
PERFORM display_data TABLES buffer USING tsp01-rqpaper tsp01-rqident.
FORM get_spool_line.
DO.
IF temse_rectyp+1(1) = 'Y'.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD temse_handle
ID 'BUFF' FIELD data_set_line
ID 'BUFFLG' FIELD 1006
ID 'BUFFLG' FIELD 5006 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD rc
ID 'ERRMSG' FIELD errmsg.
status = sy-subrc.
ELSE.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD temse_handle
ID 'BUFF' FIELD data_set_line+1
ID 'BUFFLG' FIELD 1005
ID 'BUFFLG' FIELD 5005 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD rc
ID 'ERRMSG' FIELD errmsg.
status = sy-subrc.
data_set_line(5) = data_set_line+1(5).
data_set_line-precol = ' '.
ADD 1 TO data_set_line-data_length.
ENDIF.
status = sy-subrc.
IF status <> 6. " EOF, error condition, or got data
EXIT.
ENDIF.
end of this part, try to open next part
ADD 1 TO temse_part.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD temse_handle
ID 'RC' FIELD rc
ID 'ERRMSG' FIELD errmsg.
status = sy-subrc.
IF status = 0.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = temse_client "hjl
name = temse_name
part = temse_part
IMPORTING
charco = temse_charco
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
rectyp = temse_rectyp
SIZE =
STOTYP =
type =
objtype = temse_objtyp
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
status = sy-subrc.
ENDIF.
IF status = 0.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD temse_handle
ID 'CLIENT' FIELD temse_client "hjl
ID 'NAME' FIELD temse_name
ID 'PART' FIELD temse_part
ID 'TYPE' FIELD temse_objtyp
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD temse_rectyp
ID 'CHARCO' FIELD temse_charco
ID 'PROM' FIELD 'I'
ID 'RC' FIELD rc
ID 'ERRMSG' FIELD errmsg.
status = sy-subrc.
ENDIF.
ENDDO.
IF status = 4.
status = 12. "EOF
ENDIF.
IF status = 8.
status = 40. "Line too long
ENDIF.
data_set_length = data_set_line-data_length.
ENDFORM. "GET_SPOOL_LINE
*& Form READ_DATA
text
-->BUFFER text
-->TSP01 text
-->VALUE(FIRSTtext
-->VALUE(LAST)text
FORM read_data TABLES buffer
USING tsp01 LIKE tsp01 value(first) TYPE i
value(last) TYPE i.
DATA: lines TYPE i.
REFRESH buffer.
CLEAR is_otf.
temse_client = tsp01-rqclient.
temse_name = tsp01-rqo1name.
temse_part = 1.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = temse_client
name = temse_name
part = temse_part
IMPORTING
charco = temse_charco
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
rectyp = temse_rectyp
SIZE =
STOTYP =
type =
objtype = temse_objtyp
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF sy-subrc = 0.
IF temse_objtyp(3) = 'OTF'.
is_otf = 'X'.
ENDIF.
ELSE.
EXIT.
ENDIF.
CLEAR temse_handle.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD temse_handle
ID 'CLIENT' FIELD temse_client "hjl
ID 'NAME' FIELD temse_name
ID 'PART' FIELD temse_part
ID 'TYPE' FIELD temse_objtyp
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD temse_rectyp
ID 'CHARCO' FIELD temse_charco
ID 'PROM' FIELD 'I'
ID 'RC' FIELD rc
ID 'ERRMSG' FIELD errmsg.
status = sy-subrc.
IF status = 0.
DO.
PERFORM get_spool_line.
IF status <> 0 AND status <> 40 AND status <> 12.
PERFORM close_job.
EXIT.
ENDIF.
IF status <> 12. " 12 = End
IF NOT ( data_set_length IS INITIAL ).
data_set_line-data_length = data_set_length - 1.
ENDIF.
ADD 1 TO lines.
IF lines >= first.
APPEND data_set_line TO buffer.
ENDIF.
IF ( NOT last IS INITIAL ) AND ( lines >= last ).
EXIT.
ENDIF.
ELSE.
IF lines = 0.
PERFORM close_job.
EXIT.
ENDIF.
IF lines < first .
PERFORM close_job.
EXIT.
ENDIF.
EXIT.
ENDIF.
ENDDO.
PERFORM close_job.
ENDIF.
ENDFORM. "READ_DATA
FORM CLOSE_JOB *
FORM close_job.
IF status <> 0 AND status <> 12.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD temse_handle
ID 'RC' FIELD rc
ID 'ERRMSG' FIELD errmsg.
MESSAGE e112(po) WITH status rc errmsg RAISING read_error.
ENDIF.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD temse_handle
ID 'RC' FIELD rc
ID 'ERRMSG' FIELD errmsg.
status = sy-subrc.
IF status <> 0.
MESSAGE e112(po) WITH status rc errmsg RAISING read_error.
ENDIF.
ENDFORM. "CLOSE_JOB
*& Form DISPLAY_DATA
text
-->BUFFER text
-->RQPAPER text
-->RQID text
FORM display_data TABLES buffer USING rqpaper LIKE tsp01-rqpaper
rqid LIKE tsp01-rqident.
DATA: line_length TYPE i, gcol TYPE i, glines TYPE i,
line_length2 LIKE rststype-linelength,
v, v2.
CALL FUNCTION 'RSPO_SPOOLDATA_WRITE_INIT'.
PERFORM spooldata_write_init. "MODAB
select single * from tspoptions where spoption = 'REALWIDTH'.
if sy-subrc = 0.
v = 'X'.
endif.
select single * from tspoptions where spoption = 'REALHEIGHT'.
if sy-subrc = 0.
v2 = 'X'.
endif.
IF NOT v IS INITIAL OR NOT v2 IS INITIAL.
gcol = 0.
glines = 0.
SELECT SINGLE * FROM tsp02l WHERE pjident = rqid
AND pjnummer = 0.
IF sy-subrc = 0.
gcol = tsp02l-columns.
glines = tsp02l-lines.
ELSE.
CALL FUNCTION 'RSPO_GET_SIZE_OF_LAYOUT'
EXPORTING
layout = rqpaper
IMPORTING
ANSWER =
columns = gcol
lines = glines
PFORMAT =
ENDIF.
ENDIF.
IF gcol < 80 OR v IS INITIAL.
gcol = 255.
ENDIF.
IF glines < 5 OR v2 IS INITIAL.
glines = 0.
ENDIF.
IF gcol >= 1024. "MODAB
gcol = 1023.
ENDIF.
NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE gcol
LINE-COUNT glines. " make a wide list
SET BLANK LINES ON.
LOOP AT buffer.
data_set_line = buffer.
IF data_set_line-precol = 'P'.
IF data_set_line(1) = ' '. " Echter Vorschub ?"
NEW-PAGE.
ENDIF.
CONTINUE.
ENDIF.
Zeilenlänge berechnen, falls unbekannt.
IF data_set_line-data_length IS INITIAL.
line_length = STRLEN( data_set_line-data_line ).
ELSE.
line_length = data_set_line-data_length.
ENDIF.
IF line_length > 0.
line_length2 = line_length.
PERFORM spooldata_write USING data_set_line-data_line "MODAB
line_length2
1.
ELSE.
" Leerzeile
SKIP.
ENDIF.
ENDLOOP.
ENDFORM. "DISPLAY_DATA
copied from RSPO_SPOOLDATA_WRITE
FORM spooldata_write USING value(spool_data)
value(data_length) LIKE rststype-linelength
value(start_pos) LIKE sy-colno.
function globals
DATA: lpos LIKE sy-colno
, rest_len TYPE i
, area_len TYPE i
, next_hot TYPE i " offset of next special character
, cols TYPE i " columns used by special character
, bytes TYPE i " bytes used by special character
, hot2
, hot3
, hot4
, hot5
, hot6
, hot7
, BEGIN OF escape_trick
, x1(1) TYPE x
, END OF escape_trick
, the_prtctrl(5) TYPE c
Because of a problem within the ABAP listprocessing, I shall
never output the same icon side by side with the same color
and without a gap.
As I don't know the data, I will use two different variables
alternatively.
, icon_id1 LIKE icons-l4
, icon_id2 LIKE icons-l4.
FIELD-SYMBOLS:
IF start_pos < 2.
write at / ' ' no-gap.
NEW-LINE.
lpos = 1.
ELSE.
lpos = start_pos.
ENDIF.
rest_len = STRLEN( spool_data ).
DESCRIBE FIELD spool_data LENGTH area_len IN CHARACTER MODE.
IF data_length = 0.
" fine.
ELSEIF data_length .
MODAB
PERFORM write_bigfield USING
next_hot
lpos.
WRITE AT LPOS <PLAIN_TEXT> NO-GAP.
ADD next_hot TO lpos.
SUBTRACT next_hot FROM rest_len.
ASSIGN +6(1).
ELSE.
hot7 = '?'.
ENDIF.
ELSE.
hot6 = '?'.
ENDIF.
ELSE.
hot5 = '?'.
ENDIF.
IF hot5 = space.
IF hot6 = space.
IF hot7 = space.
IF spoc-icon_sel = 1.
WRITE AT lpos(4) icon_id1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT lpos(4) icon_id2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
cols = 4.
bytes = 7.
ELSE.
IF spoc-icon_sel = 1.
WRITE AT lpos(3) icon_id1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT lpos(3) icon_id2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
cols = 3.
bytes = 6.
ENDIF.
ELSE.
IF spoc-icon_sel = 1.
WRITE AT lpos(2) icon_id1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT lpos(2) icon_id2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
cols = 2.
bytes = 5.
ENDIF.
ELSE.
"rite at lpos(1) icon_id as icon.
WRITE AT lpos(1) '#' NO-GAP. " Not enough space for any icon.
cols = 1.
bytes = 4.
ENDIF.
ENDIF.
IF .
ELSE.
EXIT.
ENDIF.
ENDWHILE.
MODAB
IF rest_len > 0.
ASSIGN
rest_len
lpos.
ENDIF.
ENDFORM. "SPOOLDATA_WRITE
*& Form WRITE_BIGFIELD
text
-->VALUE(FIELDtext
-->VALUE(LEN) text
-->VALUE(POS) text
FORM write_bigfield USING value(field) TYPE c
value(len)
value(pos).
FIELD-SYMBOLS
DATA: chunk TYPE i.
WHILE len > 0.
IF len > 255.
chunk = 255.
ELSE.
chunk = len.
ENDIF.
WRITE AT pos field(chunk) NO-GAP.
ADD chunk TO pos.
len = len - chunk.
IF len >
0.
field = field+chunk.
ENDIF.
ENDWHILE.
ENDFORM. "WRITE_BIGFIELD
*& Form SPOOLDATA_WRITE_INIT
text
FORM spooldata_write_init.
DATA: BEGIN OF escape_trick
, x1(1) TYPE x
, END OF escape_trick
FIELD-SYMBOLS: .
spoc-first_bytes+0(1) = spoc-prtctrl_start(1).
spoc-first_bytes+1(1) = spoc-frame_start(1).
spoc-first_bytes+2(1) = spoc-icon_start(1).
spoc-first_bytes+3(1) = spoc-symbol_low_start(1).
ENDFORM. "SPOOLDATA_WRITE_INIT -
My firefox webpage now opens up as a whole page and I am not able to see any any menu bars
All of a sudden my firefox webpage now opens in the whole window and I am not able to see any menu bars in the top or the "start" icon in the bottom of the screen
Toggle Full Screen mode on/off with F11 -- very useful keyboard shortcut.
References:
* http://dmcritchie.mvps.org/firefox/keyboard.htm
* http://kb.mozillazine.org/Resizing_oversize_window
* http://kb.mozillazine.org/Resizing_oversize_window
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
Hi , I have tried to download a paid app on my new ipad ,the response pop out as: payment is temporarily unavailable .please try later". Since then I was not
able to download any free app , as the same response continues pop out . I have already update ny billing address as advise by the apple itune supportFOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Cheers, Tom -
HI I HAVE AUTHORIZATION 5 SYSTEM AND NOW IM NOT HAVING THAT 5 SYSTEM NOW IM NOT ABALE TO AUTHORIZATION MY SYSTEM ITS SHOWING U HAVE AUTHORIZATION 5 SYSTEM AND I DON’T HAVE THAT 5 SYSTEM PLS CAN U HELP ME IN THIS IM NOT ABLE TO DOWNLODE ANY THING PLS DO THE NEED FULL
When you post again, don't do it in caps.
They are considered shouting and are much more difficult to read.
Allan
Maybe you are looking for
-
Where can I buy a case for the iphone 3g 16gb
Where can I buy a case for the iphone 3g 16gb?
-
Like it will stop in the middle of extraction and say unable to download attachment server connection failed, I've reset my iPod multiple times, is there a bug in the servers or is this just me? Help I really need answers plz.....ps I just upgraded t
-
FB08 Print of reversal.
Hi Gurus, If I have reversed an FI invoice with TC OB08, I cannot print it. I have tried to print with the same correspondence type as the invoice and also the correspondence type for credit memo, but get the error. No relevant item in document xxx;
-
Workflow question - versions in jpg
Hello I am figuring out how Aperture works. Am not quite getting it yet. I have been using Bridge 4 (came with PS Elements 8) and I quite like that program to sort through my photos, but it is getting a bit slow.... So, I thought perhaps try Aperture
-
Cannot find the shapes "6 Medium Squares" in the pallete
I just migrated Final Cut Studio 2 from an iMac (PowerPc) to a MacBook Pro and when I open a project in DVD Studio Pro the following warning message is displayed "Cannot find the shapes 6 Medium Squares in the palette. References ....." and the proje