Not able to load 0MATERIAL_ATTR in quality server

Hi,
When I am trying to load 0MATERIAL_ATTR datasource in quality server, I am getting error
'Invalid DataStore object name /BIC/B0000039: Reason: No valid entry in table RSTS'
0MATERIAL_ATTR datasource is active in ECC quality.
Does anybody have any idea when entry goes in RSTS table ?
Please help. It's Urgent.
It's working fine in development server though.
Thanks
Shilpa

Hi
RSTS is the transfer structure table. It dont have active version for the respective DSO object
0MATERIAL_ATTR is causing trouble now because the objects related to this same data flow are not transported properly in the last transport
Regards
N Ganesh

Similar Messages

PLEASE HELP:not able to load a simple servlet

Hi,
I'm new to weblogic server.I'm trying to setup weblogic 510.Everything was
going fine until I got stuck to this small thing.I'm not able to load a
simple servlet!.
I would appreciate any pointers regarding this.Please Help me!!!
Here is what I tried:
I have installed weblogic510 plug-in for IIS.I could successfully run jsp
files.However I am not able to load simple servlets;It gave an exception
"java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/FileSource from class
weblogic/servlet/internal/WarClassFinder"
Details of my configuration:
WebServer - IIS 4.0
IIS port=80
Weblogic port=7001
I had set it in such a way that all the requests first go to IIS and then
IIS redirects them to Weblogic.I've followed the steps according to the
document "Installing the Weblogic ISAPI Plug-in".
I've registered the servlet in weblogic.properties as following:
weblogic.httpd.register.hello=examples.servlets.HelloWorld2
I tested the servlet by URL http://localhost:7001/hello
Following is the eact text for the exception I got in the WeblogicServer
window:
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
servlet:
examples.servlets.HelloWorld2
java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/Fi
leSource from class weblogic/servlet/internal/WarClassFinder
at
weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
a, Compiled Code)
at
weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
r.java:110)
at
weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:381)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
loadClass(RecursiveReloadOnModifyClassLoader.java:234)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
calClass(RecursiveReloadOnModifyClassLoader.java:109)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:291)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
java:164)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:99)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:742)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:686)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:247)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:361)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
with Ex
ception
I dont think there were any problems in the classpath or
servletpath;Basically WeblogicServer was able to locate the servlet but when
it tried to load the servlet it gave this exception.
I would appreciate any ideas/suggestions.
Thanks,
Sravan

Nice to hear it works!
However, one mistake you have in the configuration you provided:
You put D:\weblogic\BDL\servletclasses in both CLASSPATH and
weblogic.class.path, remove it from CLASSPATH.
Cheers - Wei
Sravan Thella <[email protected]> wrote in message
news:[email protected]...
Hi Michael and Wei,
Thank you very much for the response.
My servlet details:
Name - HelloWorld2.class
package - examples.servlets
Location - d:\weblogic\BDL\servletclasses ---- here BDL is my new folder
where I want to keep my servlets
My CLASSPATH(environment) settings:
D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
>
udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
r;
my weblogic classpath settings(set it thru wlconfig)
D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
>
udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
r;
My weblogic.policy:
grant codeBase "file:d:/weblogic/-" {
permission java.io.FilePermission "d:${/}weblogic${/}-",
"read,write,delete,execute";
permission java.net.SocketPermission "localhost:1-9000",
"connect,accept,listen,resolve";
permission java.awt.AWTPermission "accessClipboard";
permission java.awt.AWTPermission "accessEventQueue";
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
permission java.io.SerializablePermission"enableSubclassImplementation";
permission java.io.SerializablePermission "enableSubstitution";
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.lang.RuntimePermission "accessDeclaredMembers.*";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "createSecurityManager";
permission java.lang.RuntimePermission "defineClassInPackage.*";
permission java.lang.RuntimePermission "exitVM";
permission java.lang.RuntimePermission "getClassLoader";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "getProtectionDomain";
permission java.lang.RuntimePermission "loadLibrary.*";
permission java.lang.RuntimePermission "modifyThread";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.lang.RuntimePermission "readFileDescriptor";
permission java.lang.RuntimePermission "setContextClassLoader";
permission java.lang.RuntimePermission "setFactory";
permission java.lang.RuntimePermission "setIO";
permission java.lang.RuntimePermission "setProtectionDomain";
permission java.lang.RuntimePermission "setSecurityManager";
permission java.lang.RuntimePermission "writeFileDescriptor";
permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
permission java.net.NetPermission "requestPasswordAuthentication";
permission java.net.NetPermission "setDefaultAuthenticator";
permission java.security.SecurityPermission "getPolicy";
permission java.security.SecurityPermission "setPolicy";
permission java.util.PropertyPermission "*", "read,write";
grant codeBase "file:d:/weblogic/BDL/servletclasses/-" {
permission java.io.FilePermission
"d:${/}weblogic${/}BDL{/}servletclasses{/}-", "read,write,delete,execute";
permission java.net.SocketPermission "localhost:1-9000",
"connect,accept,listen,resolve";
permission java.awt.AWTPermission "accessClipboard";
permission java.awt.AWTPermission "accessEventQueue";
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
permission java.io.SerializablePermission"enableSubclassImplementation";
permission java.io.SerializablePermission "enableSubstitution";
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.lang.RuntimePermission "accessDeclaredMembers.*";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "createSecurityManager";
permission java.lang.RuntimePermission "defineClassInPackage.*";
permission java.lang.RuntimePermission "exitVM";
permission java.lang.RuntimePermission "getClassLoader";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "getProtectionDomain";
permission java.lang.RuntimePermission "loadLibrary.*";
permission java.lang.RuntimePermission "modifyThread";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.lang.RuntimePermission "readFileDescriptor";
permission java.lang.RuntimePermission "setContextClassLoader";
permission java.lang.RuntimePermission "setFactory";
permission java.lang.RuntimePermission "setIO";
permission java.lang.RuntimePermission "setProtectionDomain";
permission java.lang.RuntimePermission "setSecurityManager";
permission java.lang.RuntimePermission "writeFileDescriptor";
permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
permission java.net.NetPermission "requestPasswordAuthentication";
permission java.net.NetPermission "setDefaultAuthenticator";
permission java.security.SecurityPermission "getPolicy";
permission java.security.SecurityPermission "setPolicy";
permission java.util.PropertyPermission "*", "read,write";
I dont know what is wrong here. In the weblogic.policy file,I tried
differrent combinations but it never worked.
I find weblogic documentation for troubleshooting to be pathetic.Notuseful
at all.Documentation looks
good to read ;not for practical purposes.I'm not sure whether others have
similar opinion.
I'm stuck at this thing for the past few days,I still have lot of work todo
to purusue our management team to buy weblogic
but I'm still stuck at this thing.
Thank you very much for your time.
Thanks,
Sravan
"Sravan Thella" <[email protected]> wrote in message
news:[email protected]...
Hi,
I'm new to weblogic server.I'm trying to setup weblogic 510.Everything
was
going fine until I got stuck to this small thing.I'm not able to load a
simple servlet!.
I would appreciate any pointers regarding this.Please Help me!!!
Here is what I tried:
I have installed weblogic510 plug-in for IIS.I could successfully runjsp
files.However I am not able to load simple servlets;It gave an exception
"java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/FileSource from class
weblogic/servlet/internal/WarClassFinder"
Details of my configuration:
WebServer - IIS 4.0
IIS port=80
Weblogic port=7001
I had set it in such a way that all the requests first go to IIS andthen
IIS redirects them to Weblogic.I've followed the steps according to the
document "Installing the Weblogic ISAPI Plug-in".
I've registered the servlet in weblogic.properties as following:
weblogic.httpd.register.hello=examples.servlets.HelloWorld2
I tested the servlet by URL http://localhost:7001/hello
Following is the eact text for the exception I got in the WeblogicServer
window:
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
servlet:
examples.servlets.HelloWorld2
java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/Fi
leSource from class weblogic/servlet/internal/WarClassFinder
at
weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
a, Compiled Code)
at
weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
r.java:110)
at
weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:381)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
loadClass(RecursiveReloadOnModifyClassLoader.java:234)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
calClass(RecursiveReloadOnModifyClassLoader.java:109)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:291)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
java:164)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:99)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:742)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:686)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:247)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:361)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,Compiled
Code)
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
with Ex
ception
I dont think there were any problems in the classpath or
servletpath;Basically WeblogicServer was able to locate the servlet butwhen
it tried to load the servlet it gave this exception.
I would appreciate any ideas/suggestions.
Thanks,
Sravan

I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?

I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?

Set it up as new device, explained in this article, without using the backup afterwards:
How to back up your data and set up as a new device

Not able to load master data

HI Friends,
I am not able to load data in master data even after deleting the master data. when i am schedule then the data is not even load in PSA , I am using the SRM as source system,
The SRM is refreshed every quater so we need to re load the data from that system.
Can you please suggest how to go about as it is very urgent ,
I have checked that the connection is working fine but there is one short dump that is coming
this is information that st22 is provding
The termination occurred in the ABAP program "SAPLRSS1 " in
"RSM1_CHECK_FOR_DELTAUPD".
The main program was "RSPROCESS ".
The termination occurred in line 1361 of the source code of the (Include)
program "LRSS1F11 "
of the source code of program "LRSS1F11 " (when calling the editor 13610).
The program "SAPLRSS1 " was started as a background job.
Thanks
Raju

Hi Raju,
Very strange to see your dump mesg when you are doing full load.
Are you sure this dump is realted to your load.
Check if your transfer structure is active or try doing following steps:
1. Kill all the jobs runing in BW system.
2. Delete all the data in all the realted data targets and infoobjects.
3. Then try uploading data one by one.
Ans why dont your try uploading data first only to PSA.
Regards,
Rohini

Hi i am not able to load any google sites ie gmail,orkut,youtube(login),,etc

hi i am not able to load any google sites ie gmail,orkut,youtube(login),,etc
when i tryied to open sites like www.gmail.com i got error msg as:
The connection was interrupted
The connection to www.google.com was interrupted while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
i am currently using firefox 3.6.10 so what to do to fix this pblm?

Make sure that your security software (firewall) isn't blocking or interrupting that connection.
Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

My ipod is not able to load my contacts when i select it

my ipod is not able to load my contacts when i select it. Can u help me please??

From which computer app (name and version) are you trying to load (really sync) the contacts?
What computer OS and version are you using?
What iOS version?

Not Able to Connect to Intranet Web Server

We have ASA5550 (ver. 8.0.4). We setup Split-tunneling. The Remote users were NOT able to access the intranet web server using Cisco VPN client. However, they were able to access other internal resources. We were able to ping the IP address of the Intranet Web server, but we were NOT able to ping by name. Do you have any suggestions?
Thanks.

Thanks for your response and information. The VPN adapter shows the Corporate office's DNS server. When I typed NSLOOKUP, the Remote computer also showed the Corporate office's DNS server. So, does it mean the DNS is setup correctly on the ASA?
We have about 100 Remote offices, do we need to put in 100 DNS servers for Split-DNS? The Remote offices are using Cisco VPN client to connect to us.
Thanks.

Iphoto is not able to load my pictures

Hello I have a problem while running iphoto. The program is not able to load my pictures it gets stock searching for pictures and does not displays a single image, none of the commands respond
Can you give an advice.
How can I reinstall this program.
as you can see I'm not an apple expert yet.
ilamp Mac OS X (10.3.9)

Oh dear!
Well I would start by deleting iPhoto and it's files. Do not touch the iPhoto Library folder found in the Pictures folder.
To reinstall iPhoto...
Navigate to /Applications and drag iPhoto to the trash
Navigate to /Library/Receipts and drag all iPhoto receipts to the trash
Navigate to ~/Library/Preferences and drag com.apple.iPhoto.plist to the trash.
Look at this link and see what info pertains to you to reinstall iPhoto from your computer discs.
How to restore your Apple software
Mac OS X 10.4: Restoring applications from a Mac OS X 10.2 Software Restore disc
Look all the way down the page for a downloadable version of Software restore to use in Tiger that works with your OS 10.2 computer specific software.
Install iPhoto.
Run Software Update and update iPhoto.
Hopefull you will be able to open your iPhoto Library.
Lori

Camera Raw not able to load lense correction profiles

Hi there,
like the topic says.. I am not able to load lense correction profiles and get always the error message. I have the newest version (Creative Cloud Member) of Photoshop CC 2014 15.2.2 and my Mac OSX is up to date. With older versions (when I start from a backup it is working fine!? So what can I do?! I dont want to run PS from my backup folder.. it hast to work with the actual release as well. I did not change anything.. already tried with uninstalling and reinstalling PS. But it didn´t solve the problem.

Possibly a reset to both Bridge and Camera Raw is in order. First, close Bridge. Now hold Cmd+Opt+Shift as you restart it. A box will appear; Place a check mark on all three options and hit "ok." Now, again, Cmd+Opt+Shift as you "open in Camera Raw."
See is this helps.
Benjamin

I have a sony handy cam dcr-sr85 that is not able to load to iMovie

I have a sony handy cam dcr-sr85 that is not able to load to iMovie .Does anyone have any ideas .I think maybe I need to download a driver but I'm not sure . A free one would be nice. Thanks Steve

Is it listed here as supported?
iMovie 11 - cameras supported:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie 9 - cameras supported:
http://support.apple.com/kb/HT3290?viewlocale=en_US
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014
Digital camera RAW formats supported by OS X Lion:
http://support.apple.com/kb/HT4757?viewlocale=en_US
Digital camera RAW formats supported by OS X Snow Leopard:
http://support.apple.com/kb/HT3825?viewlocale=en_US
Are you connecting by firewire?

Not able to load data in 0MATERIAL_ATTR

Hi ,
For Infoobject 0MATERIAL I am maintaining both attribute and text. I am able to load text into 0MATERIAL successfully.
But, when I am trying to load datasource 0MATERIAL_ATTR, I am getting error
'DataSource 0MATERIAL_ATTR(ECCCLNT711) must be activated,
Message no. RSDS179
'Invalid DataStore object name /BIC/B0000039: Reason: No valid entry in table RSTS'
Message no. RSM1294
I checked ECC 711, 0MATERIAL_ATTR is active. I am even able to see data in 0MATERIAL_ATTR in Tcode RSA3.
Please tell me what to do. It will be a great help.
Thanks and Regards
Shilpa

hi shilpa..
chk these threads for clue...
/message/3666553#3666553 [original link is broken]
Re: Short dump when trying to load 0MATERIAL_ATTR
hope it helps...

MDM 5.5.65.71(Not able to load the repository)

Hi All,
We are getting the strange problem in MDM patch 5.5.65.71.
We have recently upgraded to 5.5.65.71 from 5.5.64.79 and we are getting problem one of our repository while we try to load it.
The repository is not getting loaded saying that unique constraint violated and duplicates are there for one of the field.
We have removed the unique constraint in the console level and loaded the repository to check whether any duplicates existing or not. But no duplicates existing in that repository.
We have again kept unique constraint in the console level and tried to load the repository but we were not able to do it as it is
saying unique constraint violation eventhough there were no records which violates unique constraint on our repository.
Has anyone faced this problem?
Please share your views on how to get rid of this issue?
Thanks,
Narendra

Hi,
I would suggest, if you have backup archive file of the repository, then please try by deleting and again archiving repository. it may solve problem. It is suggested to check and verify and take backup of the repository before upgrading MDM server.
please revert if you don't have backup of the repository.
Regards,
Shiv

Mac computers in the office are not able to connect to our exchange server.

We started facing this problem about a month ago in our office where the apple computers can not connect to the exchange server via outlook or applemail or anything for that matter. All the other computers can connect to the exchange server with no problems
and the apple computers can even access the exchange server via OWA but the outlook and applemail apps would not connect to exchange. We have tried even deleting and re-creating some accounts on the apps but they still would not connect. At this point I am
at a complete loss and I looked everywhere through google to find out if anyone else has faced this problem but to no avail.
A little background information. This specific problem started happening after there was an un-expected series of power outages to the servers and they were shut down un-expectedly. I personally restored the servers and turned on all the services and made
sure everything was up and running after the power outages and everything was working fine. Also the first instance of the problem with the mac computers only happened two days after the servers were back up and running again and they had no issues in those
two days.
Right now we do not have that many mac users in our offices (only 3-4 users) and I have instructed them to use the OWA in the meanwhile but it is however an inconvenience to them. By now you may have realized that I am not a very experienced server admin
and I would really really appreciate any help. I extend my thanks in advance for any insight.

Hi Martin,
Thanks for the reply.
Right now I have Apple mail and Outlook installed on my mac laptop and both the applications do not connect to the exchange server. Apple Mail simply does a long process when I give my credentials to create my account and then it gives an error saying it
could not find the server while outlook quickly tells me that either the username or password is incorrect. At the same time I can connect to the server through outlook on my windows computer without any problems whatsoever.
From your reply, I gather that the VIA headers only affect Apple mail and should not affect Outlook app on the mac but right now, neither apps are connecting to the exchange server.
Either way I am trying to find out how to remove the VIA headers because it does not seem that we are using Kemp on the exchange server. Right now I do not have the in depth knowledge that I need because I was not involved in the implementation of our server
system, that was taken care of by a service provider and I was put in charge of mostly simple admin work. Now we are out of contract with the service provider so pretty much everything has fallen onto my shoulders.
If possible, would you mind pointing me in the right direction to finding out if I am using a L7 load balancer and how I would go about removing the VIA headers?

R12 not able to load supplier contact

Hi
Instance : R12.1.3, Not able to upload the supplier contact details. using the conc program "Supplier Site Contacts Open Interface Import"
the conc program is publishing the report with "no data found" when the conc program is completed normal.
observation
the table AP_SUP_SITE_CONTACT_INT is having null value for the column - REJECT_CODE
inserted the data for following columns
last_name, org_id, vendor_id, vendor_site_id,vendor_contact_interface_id,area_Code, phone number
using the below
INSERT INTO ap_sup_site_contact_int
(vendor_site_id, vendor_site_code, -- One or the other is required
org_id, operating_unit_name, -- One or the other is required
first_name, last_name, prefix, title, mail_stop, area_code,
phone, department, status, email_address, url, alt_area_code,
alt_phone, fax_area_code, fax, vendor_id, vendor_contact_interface_id)
VALUES (<Vendor_Site_ID>, NULL,
<Org_ID>, NULL,
'<Firstname>', '<Lastname>', NULL, NULL, NULL, '999',
'999-9999', NULL, 'NEW', NULL, NULL, NULL,
NULL, NULL, NULL, <Vendor_ID>, AP_SUP_SITE_CONTACT_INT_S.NextVal)
Pls advice
Regards
Yram

Hello,
What error did you get when loading Page assets in a Recommendation asset?
What is your WebCenter Sites version? If you are using 11.1.1.6.x, maybe you are experiencing the issue documented in KM Note 1531160.1.

The Blackbery device simulator is not able to connect to the mobile server.

Hi
While login to Sap Mobile BI i get the below error.
"unable to connect to mobile server.The request is timed out(0x008)"

Thank You for your reply.I had no problem with the mobile network connections it is on.The issue i am facing i am using proxy server deployment where we don't have to mention host_port in the vas cluster configuration due to which i m not able to connect to blackberry Simulator which is on client machine.But if i specify the client machine port to Host_port then i m able to connect.Can you help me to configure the Mobile server for a non-BlackBerry
deployment that uses a proxy server

Not able to load 0MATERIAL_ATTR in quality server

Similar Messages

Maybe you are looking for