Not able to load master data

HI Friends,
I am not able to load data in master data even after deleting the master data. when i am schedule then the data is not even load in PSA , I am using the SRM as source system,
The SRM is refreshed every quater so we need to re load the data from that system.
Can you please suggest how to go about as it is very urgent ,
I have checked that the connection is working fine but there is one short dump that is coming
this is information that st22 is provding
The termination occurred in the ABAP program "SAPLRSS1 " in                   
"RSM1_CHECK_FOR_DELTAUPD".                                                   
The main program was "RSPROCESS ".                                                                               
The termination occurred in line 1361 of the source code of the (Include)     
program "LRSS1F11 "                                                          
of the source code of program "LRSS1F11 " (when calling the editor 13610).    
The program "SAPLRSS1 " was started as a background job.                      
Thanks
Raju

Hi Raju,
Very strange to see your dump mesg when you are doing full load.
Are you sure this dump is realted to your load.
Check if your transfer structure is active or try doing following steps:
1. Kill all the jobs runing in BW system.
2. Delete all the data in all the realted data targets and infoobjects.
3. Then try uploading data one by one.
Ans why dont your try uploading data first only to PSA.
Regards,
Rohini

Similar Messages

  • We can able to load master data through manually FIRST ROW IS EMPTY

    Hi,
        we can able to load master data through manually without loading but in that screen where we we type the data FIRST ROW IS EMPTY.PLZ tell me why that is empty

    Becasue SAP BW already creates a Blank Line, it cannot create a new one again for you.
    So, when you loaded the Blank like with description, it uses the existing blank line and creates test for it.
    Each row in the table will have a SID.
    e.g.,
    12345 text1
    23446 text2
    You cannot have
    12345 text1
    12345 text2
    If you load the above, you will have "12345 text2" in the table.
    Same way, you cannot have two SIDs for the same key, so your new text is used for the existing Blank Key value.
    SAP creates this:
    Key, Description
    when you loaded the Master Data, you have:
    " ", "whatever you loaded".
    Edited by: Ananda Theerthan on Apr 27, 2010 7:03 AM

  • DTP error: Lock NOT set for: Loading master data attributes

    Hi,
    I have a custom datasource from ECC which loads into 0CUST_SALES.  I'm using DTP & transformation which has worked for loading data in the past for this infoobject.  The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".  I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7.   Thanks in advance!

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • Lock NOT set for: Loading master data attributes error

    Hi experts,
    We were encountering this error before when trying to load master data.  When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again.  We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE.  I have read that it is possible this lock error happens when two change runs happen at the same time.
    My question are:
    1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
    2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
    mark
    Message was edited by:
            Mark Siongco
    Message was edited by:
            Mark Siongco

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • SAP fixed asset add-on. Not able to import master data using upload pgm.

    Hi all,
    I am trying to import fixed asset master data using an excel file into sap B1 2007a patch level 42. I am able to run the import transaction. It tries to process and then giving me a message ' Import end: Number of successfully imported assets: 0. Number of processed assets:2. We have looked at the event log file and couldn't find anything related to the upload.  I have gone through other posts and didn't face this issue. Any hellp is apreciated.
    Path which I am using to upload the fixed asset master master data: Administration --> Setup --> fixed asset --> import fixed asset master data.
    Following points (see below) also taken into account while creating the master data sheet.
    also replaced the ',' in the csv file to ';' before uploading and changed the fixed asset mode to 'transfer' in the administration --> system initialization > company detaills> basis initialization.
    Thanks
    Johnson zavier
    Mandatory:     Item Code = Asset Class; this Asset Class must be previous defined in the Asset Settings (don't change/delete anything in the item-master data - there are the Asset Classes Z-00u2026. Are stored          
         Description = Description of this Asset          
         Capitalization Date = do it like this (YYYY-MM-DD). This columne must be a text format          
         APC = Aquisition/Procuction Cost; when you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45          
         Quantity = only mandatory, when you use the same assets stored under one asset number. Example you have ten equal chairs, so you can handle this with one asset number and quantity ten          
         Dep01 = Depreciation area; this entry must be previous defined in the Asset Settings          
         Depr Start date 01 = do it like this (YYYY-MM-DD). This columne must be a text format. The beginning must be the first of the month. Please compare it in this case with the capitalization date          
         Useful Life 01 = calculated in months (not years)          
         Remaining Life 01 = calculated in months (not years)          
         Depr Type 01 = Depreciation Type must be previous defined in the Asset settings
         Ordinary Depr 01 = ordinary depreciation; this is the comulated value you can see in the asset history sheet from the old asset solution. When you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45
         Unplanned Depr 01 = unplanned/extraordinary depreciation; this is the comulated value you can see in the asset history sheet from the old asset solution. When you have digits after coma please use dot for separation - don't use thousand separators; Example 23444.45
         SpDpAcc1 01 = Special depreciation account; when you use special depreciations and you have it to balance on special accounts fill in this account. This is an exeption - in normal projects not needed
         SpDpKey2 01 = Special depreciation; when you use special depreciation you have to enter this cumulative value in this field. This is an exeption in normal projects not needed
         SpDpAccu2026 = for further special depreciation accounts; This is an exeption
         SpDpKey.. = for furhter special depreciation values; This is an exeption
    Optional:     Vendor Code = when using this please be aware that the vendor code is previous defined in the system
         all others = you can use if you want. The only limitation is the type/length of these fields
         When you are ready with your entries mark from the first free row on for instance the next 20 rows than right mouse key - delete rows. This is necessary to prevent that in the background are invisible signs
         After entering in this default excel all your assets, please save it as .csv file. (the grey message - relation to information of csv - please say yes; when you close than excel a furhter message - would you save.. - please say no now
         After entering all data please save it as .CSV file. First grey window (format information) please choose 'yes'. Second window (when you close this file) please choose 'no'.
         You have now a .csv file in hands right now for uploading into the fixed assets.
         This example you can use for a test-import based on the year 2004

    The issue was  because of the conflict of Depr. Start Date, Use Life and Remaining Life. After I corrected the data, it worked just fine. The note 876670 helped me to resolve this issue. Thanks to Adam at Toronto SAP Business one support for his expert analysis and suggestions.
    thanks
    johnson zavier
    Edited by: Johnson Zavier on Feb 19, 2009 11:10 PM
    Edited by: Johnson Zavier on Feb 19, 2009 11:20 PM

  • Not able to find master data

    Hi,
    I loaded data from flat file to masterdata attributes, Its successfully loaded. But the problem is its not showing the data in masterdata maintain. its showing only for master data object, its not showing for attributes. Any body give suggestion why the data is not showing for the attributs.
    Thanks & Regards
    VEnkat

    Hi Venkat,
    Did you check teh PSA. In the PSA are all the columns filled-up correctly. If not then may be the file format is wrong or the mapping is incorrect in the transfer rules.
    Bye
    Dinesh

  • BI Statistical data not able to load delta data

    Hi Experts,
    I am working on BI7.0, we are trying to activate the BI Statistical cubes and load Delta data, so in the process , I did all the steps , activated and initialised the Data sources in BI
    0TCT_DS03,0TCT_DS02 to the Cubes0TCT_C02 and 0TCT_C03, My aim is  initialise today and load the delta loads from today onwards and I gave init selection on date, as start date today, and I switched on all BI stastical data but my delta records are not coming, I see in RSA7 in my BI system, I did not see my delta getting updated
    Please advise how to get this delta records for these Data sources,
    Thanks in advance

    Hello Dheeraj ,
    If delta is showing Zero records then there is no records changes or creation after the Init Run. So do some activities that will be captured in the Stat and then load the delta.
    Thanks
    Chandran

  • Not Able to Load the data type "Non Currency"in Planning accounts dimension

    Dear All,
    We are building Meta data in planning using HAL 9.2 ...while construction of accounts we were able to assign "Currency" Data Type ,but were unable to add the "Non Currency" data types to account members.
    We have mentioned "Non Currency" in the the Data Type Field.
    Thanks in Advance.

    Hi Guys my issue is resolved..... just wanted to let you know that you will need to write "Non-Currency" in the field name in the csv for marking accounts as Non currency data type.

  • Lock NOT set for: Loading master data attributes

    Error when running Process chain on a load pls can you advise?
    Thanks

    Hi,
    Probably some other job is running for the same tables,or activation change run is happening.
    Check your monitor to see what other jobs are running or check in SM37. Wait till those jobs finish and then try again.
    You can also use tcode SM12 to delete any lock entries as well.
    Cheers,
    Kedar

  • Where to set lock while loading master data attributes

    Hello Experts,
    I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
    When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
    Here what exactly  LOCK means?
    Thanks in advance.
    Zakir Khan.

    Hi,
    The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
    In your case you and schedule the DTP one after another.
    Thanks

  • Not able to load text master data for customer infoobject

    Hi Guys,
    I am not able  load master data text to the customer infoobject.
    I have a infoobject-A which is loaded with 1000 records, out of which only 100 records are with text and remaining are without text.
    I have run a repair full request(extraction from ECC) and
    i can see data till PSA(the 100 records which are with text are no more available in ECC now).remaining 900 records are available with text till PSA but not updating to target infoobject.
    I have 3.X flow and i have checked transfer rules update rules and tried everythign from side-but no use-still not not working.
    Please post your suggestions.
    Thanks in advance
    Regards,
    Siva

    Hi Ramanjaneyulu,
    Transferrules screen shot:-
    update rules
    Regards,
    Siva

  • Aperture was not able to adjust the date and time of the master file "2008-06-22 at 14-41-14.jpg" because it has a format that does not permit date modification.

    I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
    Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.

    Can you post an ipconfig /all from the server and the DC?
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Error while loading master data to attribute ZMAJORGU(Major organisational unit)

    Hi Experts,
    While loading master data to  ZMAJORGU(MOU)(info object texts) from  datasource (ZOS_HRP1000)datasource iam getting error in DTP.
    below is the error...
    Diagnosis
        Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
        the attribute/characteristic ZMAJORGU &.
    System Response
        The system has recognized that the value mentioned above is invalid, and
        has processed this general error message. A subsequent message may give
        you more information on the error. This message refers to the same
        value, even though it does not state this explicitly.
    Procedure
        If this message appears during a data load, maintain the attribute in
        the PSA maintenance screens. If this message appears in the master data
        maintenance screens, leave the transaction and call it again. This
        allows you to maintain your master data.
    Please find the below screen shots
    I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
    I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
    'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest  value i could find in both the fileds was was AVP Shipment .
    I have the following questions
    1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
    2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
    Please find the attached PSA data file (u have to convert it to Excel)
    I request people to help me analyse the issue and fix the issue.
    Regards
    Kiran

    Ram
    I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres  like smallof caps or numeric... why on this record is creating an issue...
    please have a look at error stack
    and i have one more question when i look at PSA there are close to 300000 records
    but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
    Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

  • Error 194 while loading Master Data.

    Hi,
         I've a custom Info Object which has 0MATERIAL as an attribute. While trying to load master data to this custom info object using DBConnect , I'm getting the error:
    RSDMD 194
    0MATERIAL: Data record 1('0001003') : Version '1009841' is not valid.
    I think it's a problem with conversion exit. But I'm not able to solve this problem. It would be of great help if you could guide me on how to overcome this.
    Thanks in advance.
    Regards
    Hari

    Hari,
        I'm thinking for DB Connected datasources we have Propose Tab Page and Fileds Tab Page. In the Propose tab Page you can see data type and Format(internal or External or check). select external, put data type of your Material Infoobject Data type in the Propose Tab Page.
    all the best.
    Note: I'm thinking DB Connected Datasources got Propose Tab page. Please correct me if i'm wrong.
    Regards,
    Nagesh Ganisetti.
    *Assign Points if it helps

  • ABAP DUMP while loading master data

    hi Gurus,
                  I am trying to load master data but I am getting the following dump , I cannot infer anything from the Dump message, I would be grateful if anyone could throw some light on it..
    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC                                                             
    Exception              CX_SY_OPEN_SQL_DB                                                                      
           Occurred on     11/13/2006 at 13:17:57                                                                               
    The ABAP/4 Open SQL array insert results in duplicate database records.                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "CL_RSDMD_UPDATE_MASTER_DATA===CP " had to be                                        
    terminated because one of the                                                                               
    statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.                                                                               
    What can you do?                                                                               
    Print out the error message (using the "Print" function)                                                      
    and make a note of the actions and input that caused the                                                      
    error.                                                                               
    To resolve the problem, contact your SAP system administrator.                                                
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer                                      
    termination messages, especially those beyond their normal deletion                                          
    date.                                                                               
    is especially useful if you want to keep a particular message.                                                                               
    rror analysis                                                                               
    n exception occurred. This exception is dealt with in more detail below   
    The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was   
    neither                                                                   
    aught nor passed along using a RAISING clause, in the procedure "_DB_FIRE"
    "(METHOD)"                                                                               
    ince the caller of the procedure could not have expected this exception   
    to occur, the running program was terminated.                             
    he reason for the exception is:                                           
    f you use an ABAP/4 Open SQL array insert to insert a record in           
    he database and that record already exists with the same key,             
    his results in a termination.                                                                               
    With an ABAP/4 Open SQL single record insert in the same error            
    ituation, processing does not terminate, but SY-SUBRC is set to 4.)                                                                               
    ow to correct the error                                                                               
    he exception must either be prevented, caught within the procedure "_DB_FIR
    (METHOD)", or declared in the procedure's RAISING clause.                 
    o prevent the exception, note the following:                              
    se an ABAP/4 Open SQL array insert only if you are sure that none of      
    he records passed already exists in the database.                                                                               
    ou may able to find an interim solution to the problem                    
    n the SAP note system. If you have access to the note system yourself,    
    se the following search criteria:                                                                               
    APSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC                                
    L_RSDMD_UPDATE_MASTER_DATA===CP " or "CL_RSDMD_UPDATE_MASTER_DATA===CM00Y "  
    DB_FIRE"

    one of the response says " In the infopackage set processing as 'Only PSA' and tick the checkboxes for 'Update subsequently in data targets' and 'delete duplicate records'.then try to reload."
    I do not find the Delete duplicate records check box in the IP...cananyonepls tell me where to find thid check box?
    thanks

Maybe you are looking for