Not able to load Material deltas
Hi
I search the SDN forums for delta some suggested to make a init load then do a delta...But when I does that Init load was succesfully loaded with more than 5 lacks records, then I could see the init req in RSA7 too !
But when I create an infopack for Delta and run its giving me an error message...Can any body tell me am I doing anything wrong while getting material deltas in the above process ?
regards
hi SAM
kindly paste the Error message u r giving
and tell us in detail..
Regards
Similar Messages
-
I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?
Set it up as new device, explained in this article, without using the backup afterwards:
How to back up your data and set up as a new device -
Hi,
I am not able to post material in MB1C.I am getting error,"posting only possible in periods 2002/11 and 2002/10 in company code ZVAN". I have already done,OMS2 and OMS2.Welcome to this forum. Please make a search in the forum before posting any repeated questions. This question has been answered many times and you will get inputs from there.
thanks
G. Lakshmipathi -
HI Friends,
I am not able to load data in master data even after deleting the master data. when i am schedule then the data is not even load in PSA , I am using the SRM as source system,
The SRM is refreshed every quater so we need to re load the data from that system.
Can you please suggest how to go about as it is very urgent ,
I have checked that the connection is working fine but there is one short dump that is coming
this is information that st22 is provding
The termination occurred in the ABAP program "SAPLRSS1 " in
"RSM1_CHECK_FOR_DELTAUPD".
The main program was "RSPROCESS ".
The termination occurred in line 1361 of the source code of the (Include)
program "LRSS1F11 "
of the source code of program "LRSS1F11 " (when calling the editor 13610).
The program "SAPLRSS1 " was started as a background job.
Thanks
RajuHi Raju,
Very strange to see your dump mesg when you are doing full load.
Are you sure this dump is realted to your load.
Check if your transfer structure is active or try doing following steps:
1. Kill all the jobs runing in BW system.
2. Delete all the data in all the realted data targets and infoobjects.
3. Then try uploading data one by one.
Ans why dont your try uploading data first only to PSA.
Regards,
Rohini -
hi i am not able to load any google sites ie gmail,orkut,youtube(login),,etc
when i tryied to open sites like www.gmail.com i got error msg as:
The connection was interrupted
The connection to www.google.com was interrupted while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
i am currently using firefox 3.6.10 so what to do to fix this pblm?Make sure that your security software (firewall) isn't blocking or interrupting that connection.
Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]] -
My ipod is not able to load my contacts when i select it
my ipod is not able to load my contacts when i select it. Can u help me please??
From which computer app (name and version) are you trying to load (really sync) the contacts?
What computer OS and version are you using?
What iOS version? -
Iphoto is not able to load my pictures
Hello I have a problem while running iphoto. The program is not able to load my pictures it gets stock searching for pictures and does not displays a single image, none of the commands respond
Can you give an advice.
How can I reinstall this program.
as you can see I'm not an apple expert yet.
ilamp Mac OS X (10.3.9)Oh dear!
Well I would start by deleting iPhoto and it's files. Do not touch the iPhoto Library folder found in the Pictures folder.
To reinstall iPhoto...
Navigate to /Applications and drag iPhoto to the trash
Navigate to /Library/Receipts and drag all iPhoto receipts to the trash
Navigate to ~/Library/Preferences and drag com.apple.iPhoto.plist to the trash.
Look at this link and see what info pertains to you to reinstall iPhoto from your computer discs.
How to restore your Apple software
Mac OS X 10.4: Restoring applications from a Mac OS X 10.2 Software Restore disc
Look all the way down the page for a downloadable version of Software restore to use in Tiger that works with your OS 10.2 computer specific software.
Install iPhoto.
Run Software Update and update iPhoto.
Hopefull you will be able to open your iPhoto Library.
Lori -
Camera Raw not able to load lense correction profiles
Hi there,
like the topic says.. I am not able to load lense correction profiles and get always the error message. I have the newest version (Creative Cloud Member) of Photoshop CC 2014 15.2.2 and my Mac OSX is up to date. With older versions (when I start from a backup it is working fine!? So what can I do?! I dont want to run PS from my backup folder.. it hast to work with the actual release as well. I did not change anything.. already tried with uninstalling and reinstalling PS. But it didn´t solve the problem.Possibly a reset to both Bridge and Camera Raw is in order. First, close Bridge. Now hold Cmd+Opt+Shift as you restart it. A box will appear; Place a check mark on all three options and hit "ok." Now, again, Cmd+Opt+Shift as you "open in Camera Raw."
See is this helps.
Benjamin -
PLEASE HELP:not able to load a simple servlet
Hi,
I'm new to weblogic server.I'm trying to setup weblogic 510.Everything was
going fine until I got stuck to this small thing.I'm not able to load a
simple servlet!.
I would appreciate any pointers regarding this.Please Help me!!!
Here is what I tried:
I have installed weblogic510 plug-in for IIS.I could successfully run jsp
files.However I am not able to load simple servlets;It gave an exception
"java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/FileSource from class
weblogic/servlet/internal/WarClassFinder"
Details of my configuration:
WebServer - IIS 4.0
IIS port=80
Weblogic port=7001
I had set it in such a way that all the requests first go to IIS and then
IIS redirects them to Weblogic.I've followed the steps according to the
document "Installing the Weblogic ISAPI Plug-in".
I've registered the servlet in weblogic.properties as following:
weblogic.httpd.register.hello=examples.servlets.HelloWorld2
I tested the servlet by URL http://localhost:7001/hello
Following is the eact text for the exception I got in the WeblogicServer
window:
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
servlet:
examples.servlets.HelloWorld2
java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/Fi
leSource from class weblogic/servlet/internal/WarClassFinder
at
weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
a, Compiled Code)
at
weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
r.java:110)
at
weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:381)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
loadClass(RecursiveReloadOnModifyClassLoader.java:234)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
calClass(RecursiveReloadOnModifyClassLoader.java:109)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:291)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
java:164)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:99)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:742)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:686)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:247)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:361)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
with Ex
ception
I dont think there were any problems in the classpath or
servletpath;Basically WeblogicServer was able to locate the servlet but when
it tried to load the servlet it gave this exception.
I would appreciate any ideas/suggestions.
Thanks,
SravanNice to hear it works!
However, one mistake you have in the configuration you provided:
You put D:\weblogic\BDL\servletclasses in both CLASSPATH and
weblogic.class.path, remove it from CLASSPATH.
Cheers - Wei
Sravan Thella <[email protected]> wrote in message
news:[email protected]...
Hi Michael and Wei,
Thank you very much for the response.
My servlet details:
Name - HelloWorld2.class
package - examples.servlets
Location - d:\weblogic\BDL\servletclasses ---- here BDL is my new folder
where I want to keep my servlets
My CLASSPATH(environment) settings:
D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
>
udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
r;
my weblogic classpath settings(set it thru wlconfig)
D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
>
udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
r;
My weblogic.policy:
grant codeBase "file:d:/weblogic/-" {
permission java.io.FilePermission "d:${/}weblogic${/}-",
"read,write,delete,execute";
permission java.net.SocketPermission "localhost:1-9000",
"connect,accept,listen,resolve";
permission java.awt.AWTPermission "accessClipboard";
permission java.awt.AWTPermission "accessEventQueue";
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
permission java.io.SerializablePermission"enableSubclassImplementation";
permission java.io.SerializablePermission "enableSubstitution";
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.lang.RuntimePermission "accessDeclaredMembers.*";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "createSecurityManager";
permission java.lang.RuntimePermission "defineClassInPackage.*";
permission java.lang.RuntimePermission "exitVM";
permission java.lang.RuntimePermission "getClassLoader";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "getProtectionDomain";
permission java.lang.RuntimePermission "loadLibrary.*";
permission java.lang.RuntimePermission "modifyThread";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.lang.RuntimePermission "readFileDescriptor";
permission java.lang.RuntimePermission "setContextClassLoader";
permission java.lang.RuntimePermission "setFactory";
permission java.lang.RuntimePermission "setIO";
permission java.lang.RuntimePermission "setProtectionDomain";
permission java.lang.RuntimePermission "setSecurityManager";
permission java.lang.RuntimePermission "writeFileDescriptor";
permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
permission java.net.NetPermission "requestPasswordAuthentication";
permission java.net.NetPermission "setDefaultAuthenticator";
permission java.security.SecurityPermission "getPolicy";
permission java.security.SecurityPermission "setPolicy";
permission java.util.PropertyPermission "*", "read,write";
grant codeBase "file:d:/weblogic/BDL/servletclasses/-" {
permission java.io.FilePermission
"d:${/}weblogic${/}BDL{/}servletclasses{/}-", "read,write,delete,execute";
permission java.net.SocketPermission "localhost:1-9000",
"connect,accept,listen,resolve";
permission java.awt.AWTPermission "accessClipboard";
permission java.awt.AWTPermission "accessEventQueue";
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
permission java.io.SerializablePermission"enableSubclassImplementation";
permission java.io.SerializablePermission "enableSubstitution";
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.lang.RuntimePermission "accessDeclaredMembers.*";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "createSecurityManager";
permission java.lang.RuntimePermission "defineClassInPackage.*";
permission java.lang.RuntimePermission "exitVM";
permission java.lang.RuntimePermission "getClassLoader";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "getProtectionDomain";
permission java.lang.RuntimePermission "loadLibrary.*";
permission java.lang.RuntimePermission "modifyThread";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.lang.RuntimePermission "readFileDescriptor";
permission java.lang.RuntimePermission "setContextClassLoader";
permission java.lang.RuntimePermission "setFactory";
permission java.lang.RuntimePermission "setIO";
permission java.lang.RuntimePermission "setProtectionDomain";
permission java.lang.RuntimePermission "setSecurityManager";
permission java.lang.RuntimePermission "writeFileDescriptor";
permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
permission java.net.NetPermission "requestPasswordAuthentication";
permission java.net.NetPermission "setDefaultAuthenticator";
permission java.security.SecurityPermission "getPolicy";
permission java.security.SecurityPermission "setPolicy";
permission java.util.PropertyPermission "*", "read,write";
I dont know what is wrong here. In the weblogic.policy file,I tried
differrent combinations but it never worked.
I find weblogic documentation for troubleshooting to be pathetic.Notuseful
at all.Documentation looks
good to read ;not for practical purposes.I'm not sure whether others have
similar opinion.
I'm stuck at this thing for the past few days,I still have lot of work todo
to purusue our management team to buy weblogic
but I'm still stuck at this thing.
Thank you very much for your time.
Thanks,
Sravan
"Sravan Thella" <[email protected]> wrote in message
news:[email protected]...
Hi,
I'm new to weblogic server.I'm trying to setup weblogic 510.Everything
was
going fine until I got stuck to this small thing.I'm not able to load a
simple servlet!.
I would appreciate any pointers regarding this.Please Help me!!!
Here is what I tried:
I have installed weblogic510 plug-in for IIS.I could successfully runjsp
files.However I am not able to load simple servlets;It gave an exception
"java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/FileSource from class
weblogic/servlet/internal/WarClassFinder"
Details of my configuration:
WebServer - IIS 4.0
IIS port=80
Weblogic port=7001
I had set it in such a way that all the requests first go to IIS andthen
IIS redirects them to Weblogic.I've followed the steps according to the
document "Installing the Weblogic ISAPI Plug-in".
I've registered the servlet in weblogic.properties as following:
weblogic.httpd.register.hello=examples.servlets.HelloWorld2
I tested the servlet by URL http://localhost:7001/hello
Following is the eact text for the exception I got in the WeblogicServer
window:
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
servlet:
examples.servlets.HelloWorld2
java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/Fi
leSource from class weblogic/servlet/internal/WarClassFinder
at
weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
a, Compiled Code)
at
weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
r.java:110)
at
weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:381)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
loadClass(RecursiveReloadOnModifyClassLoader.java:234)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
calClass(RecursiveReloadOnModifyClassLoader.java:109)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:291)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
java:164)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:99)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:742)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:686)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:247)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:361)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,Compiled
Code)
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
with Ex
ception
I dont think there were any problems in the classpath or
servletpath;Basically WeblogicServer was able to locate the servlet butwhen
it tried to load the servlet it gave this exception.
I would appreciate any ideas/suggestions.
Thanks,
Sravan -
I have a sony handy cam dcr-sr85 that is not able to load to iMovie
I have a sony handy cam dcr-sr85 that is not able to load to iMovie .Does anyone have any ideas .I think maybe I need to download a driver but I'm not sure . A free one would be nice. Thanks Steve
Is it listed here as supported?
iMovie 11 - cameras supported:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie 9 - cameras supported:
http://support.apple.com/kb/HT3290?viewlocale=en_US
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014
Digital camera RAW formats supported by OS X Lion:
http://support.apple.com/kb/HT4757?viewlocale=en_US
Digital camera RAW formats supported by OS X Snow Leopard:
http://support.apple.com/kb/HT3825?viewlocale=en_US
Are you connecting by firewire? -
BI Statistical data not able to load delta data
Hi Experts,
I am working on BI7.0, we are trying to activate the BI Statistical cubes and load Delta data, so in the process , I did all the steps , activated and initialised the Data sources in BI
0TCT_DS03,0TCT_DS02 to the Cubes0TCT_C02 and 0TCT_C03, My aim is initialise today and load the delta loads from today onwards and I gave init selection on date, as start date today, and I switched on all BI stastical data but my delta records are not coming, I see in RSA7 in my BI system, I did not see my delta getting updated
Please advise how to get this delta records for these Data sources,
Thanks in advanceHello Dheeraj ,
If delta is showing Zero records then there is no records changes or creation after the Init Run. So do some activities that will be captured in the Stat and then load the delta.
Thanks
Chandran -
R12 not able to load supplier contact
Hi
Instance : R12.1.3, Not able to upload the supplier contact details. using the conc program "Supplier Site Contacts Open Interface Import"
the conc program is publishing the report with "no data found" when the conc program is completed normal.
observation
the table AP_SUP_SITE_CONTACT_INT is having null value for the column - REJECT_CODE
inserted the data for following columns
last_name, org_id, vendor_id, vendor_site_id,vendor_contact_interface_id,area_Code, phone number
using the below
INSERT INTO ap_sup_site_contact_int
(vendor_site_id, vendor_site_code, -- One or the other is required
org_id, operating_unit_name, -- One or the other is required
first_name, last_name, prefix, title, mail_stop, area_code,
phone, department, status, email_address, url, alt_area_code,
alt_phone, fax_area_code, fax, vendor_id, vendor_contact_interface_id)
VALUES (<Vendor_Site_ID>, NULL,
<Org_ID>, NULL,
'<Firstname>', '<Lastname>', NULL, NULL, NULL, '999',
'999-9999', NULL, 'NEW', NULL, NULL, NULL,
NULL, NULL, NULL, <Vendor_ID>, AP_SUP_SITE_CONTACT_INT_S.NextVal)
Pls advice
Regards
YramHello,
What error did you get when loading Page assets in a Recommendation asset?
What is your WebCenter Sites version? If you are using 11.1.1.6.x, maybe you are experiencing the issue documented in KM Note 1531160.1. -
Not able to see material and operation overview as tab in production order
Hello Friends,
While creating the production order by T.C CO01, after giving the material code , production plant and order type, system took me inside it.There i am not able to see component overview, operation overview as tab.Whereas in menu option Goto - overview - component , i can see there.But i want this things as tab in screen where we give qty and dates.
So guys do you know where to do configuration for it.
Thanking you guys in adDear Jitendra,
In Production Order you will find Component and Operation screen under two different icons (not tab) production Header screen.
- For Component Overview it is something like Balance or on pressing F6 you will branch to Component overview Screen.You will find it just after Hat icon
- And for Operation over view it looks like ladder or on pressing F5 you will branch directly to operation screen.you will find this icon just after Component overview Icon. -
Not able to load text master data for customer infoobject
Hi Guys,
I am not able load master data text to the customer infoobject.
I have a infoobject-A which is loaded with 1000 records, out of which only 100 records are with text and remaining are without text.
I have run a repair full request(extraction from ECC) and
i can see data till PSA(the 100 records which are with text are no more available in ECC now).remaining 900 records are available with text till PSA but not updating to target infoobject.
I have 3.X flow and i have checked transfer rules update rules and tried everythign from side-but no use-still not not working.
Please post your suggestions.
Thanks in advance
Regards,
SivaHi Ramanjaneyulu,
Transferrules screen shot:-
update rules
Regards,
Siva -
Not able to load page with contents to be shown on selecting first option
I have one.jsp which has a select box whose values are got from the database..on change of option, the two.jsp is excuted (which includes one.jsp using one.jsp) and the corresponding results are shown...
As of now i am using the select box with the first option as "select the option"..
Now in the select box, i dont want the use
[<option>--Select the option--</option>/code]
...i want to load the select box with the database values in one.jsp and load the corresponding contents to be shown for the first option value automatically using two.jsp by default...
can anyone help me out in this....Urgently neededLet me try to explain this with example:
Say The select box contain these values: Fruits and Vegetable which say are retrieved from the database.
the onchange function retrieves the following if Fruits are selected:
Examples of fruits: mango,apple
Similarly if Vegetables are selected, the followin is displayed:
Example of Vegetable: Raddish, Carrot.
Since i was using the "Select a option" as the first option, when i clicked on fruits the examples of fruits are displayed and if i select vegetable the example of vegetables are displayed.
Now i dont want to use the "Select a option". I just want to show the option values as fruits and vegetables and by default the examples of fruits should be displayed. If i select vegetables the examples of vegetables should be selected.
Currently what is happening is that i am not able to show the examples of fruits by default. Secondly, I am able to show the examples of vegetables on selecting the Vegetables from the select box but if i select the Fruits again, the examples of fruits are not been displayed.
Hope you get this better now...Any solutions...
Maybe you are looking for
-
LabVIEW is crashing when i am trying to build the exe
I am trying to build an executable from a program in which i am communicating with several instruments, whenever i am trying to build an exe labview is crashing and i am getting the error Exception: access violation(0xc0000005)at eip=0x10054DD1. afte
-
How to use another java program to stop this running prpgram???
Dear Sir: I have following code and I run it success, import java.util.*; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.io.*; public class CertainAndRepeatTime{ public static void main(String[] args) throws IO
-
Photoshop CS5 Flickers Under Windows 8 64
I just upgraded my Win7 64 desktop to Win8 pro 64, and now photoshop cs5 is behaving very strangely. Any mouse click operation causes the entire working window to flicker, and the background to cycle between the normal pale gray background, a window
-
How do you tell what driver your macbook is?
im trying to hook my macbook pro up to my roomates computer, but i have to know what driver it is, how do i find out?
-
Finder File Structure of iMovie 08
Is there any documentation on the Finder file structure that iMovie 08 uses for Events and Projects? While trying to move files to an external hard drive because the start-up disk was getting full, my father messed up his iMovie 08 files. I recombine