Not able to login to any webmail user

Somehow my webmail access has become corrupted. I have been able to log into webmail before. I am currently receiving the login page but when I attempt to login as any of the current users or new users that I create I get an error page stating "Unknown user or password incorrect."
I have turned Mail & Webmail on and then off again. I have restarted the server and the computer but problem remains.
Can anyone help me correct this problem?

Nothing changes suddenly by itself.
Think about what changes you made recently.
Did you change the required authentication methods? If yes, you will need to tell Squirrelmail /Webmail) as well that it needs to use a different authentication method.
See here: http://discussions.apple.com/thread.jspa?messageID=2673668

Similar Messages

  • IDES - Not able to login to any other client

    Folks,
    I just installed SAP IDES system and successfully imported a permanent license key.
    When I run SCC4, I can see that the default installation creates the following clients - 000, 001, 800, 810, 811 and 812.
    I am able to login to clients 000 and 001 using sap* as user. However, I am not able to login to either 800 or 812. I have tried both sap* as well as ddic as the username. The error I get back is that either the username or password is invalid.
    Can someone please suggest me what I need to do to make it work?
    Thank you in advance for your help.
    Regards,
    Peter

    So one option is to modify usr02 table for the password. However, I am thinking there must be a more standard way. My IDES installation was a standard one. There was nothing special about my installation.
    Can someone please help?
    Sadly, no other way if your SAP*,DDIC and any other existing super user is locked.
    You got to delete the SAP*/DDIC from the database.
    Proceed as follows:
    1.Check your instant profile and make login/no_automatic_user_sapstar is set to "0" and now make a restart of your server.
    Try this from command prompt.
    sqlplus /nolog;
    conn /as sysdba;
    Now type this and take caution as this is case sensitive:
    DELETE FROM <sid>.USR02
    WHERE BNAME='SAP*' AND MANDT='<client no.>'
    EG-->
    DELETE FROM dev.USR02
    WHERE BNAME='SAP*' AND MANDT='123'
    Then restart your server and login as user SAP* password pass.
    Hopefully this will work.
    Regards,
    Ashutosh

  • FDQM - Not able to login with the admin user

    Hi,
    I am not able to login to FDQM web browser using the admin user. I am facing the error as below;
    Error: Error retreiving security agent header.
    Detail: InnerException1: Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\' is denied.
    I tried checking the Load Balance Configuration settings, where i found the Shared services Test connection was failing. But i am able to login to Shared services with admin user.
    Can any one please help me. It is most critical and your replies are most welcome & appreciated.
    Thanks
    Damodhar

    When was the last time you were able to login and what has changed since that time?
    Has someone changed access privileges to that specific location => Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\'?
    Thank you,
    Todd Rebner

  • Users not able to login but present in user list

    Hi :
    We have couple of users in user list , among those some of the users are not able to login . When i went to SU01 that users are present .
    when i try to display/ change the users which is saying that user does not exist . but that users are present in user list .
    How to activate those users instead of recreate .
    This is very critical for me please help .
    Thanks in advance,
    Chimsi

    Chimsi,
    Now this is going to sound silly, but on their log on screen, are they trying to log into the correct client?
    Also make sure they are using the correct password. You can reset it in SU01.
    Make sure in SU01, that the users are defined as "Dialog" user in the "Logon Data" tab and that the user's Validity Period is set correctly.
    Let us know if the logon data is all correct, but you are still getting errors.
    Cheers,
    Pat.
    Message was edited by: Patrick Yee

  • Not able to login with new LDAP user in portal..

    All,
    We have created a new user in our LDAP environment in Portal. ( not UME ). I am able to view the user id in Identity management and assigned the necessary roles. but, i am unable to login using the new user id. Can anybody please tell me what is missing here ? Thanks in advance.

    Hi Addy,
    As Raghu said, this seems to be a password problem.
    Log into the Portal as an User administrator.
    Find the user and Click on Modify.
    In User Information, Add a new password.
    Then try to login with the given user id again with the new password.
    Good Luck!!!
    Biroj Patro

  • Not able to login to portal links

    Hi,
    I am not able to login to any link from index.html page except system information page.
    When I try to access any other link and enter user name and password, only page is getting refreshed and it is not logging in.
    Error from default trace:
    #1.5 #00188B34FD33006C0000002800007AC8000461B1DE2BD2F2#1233316471589#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/tcwddispwda#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_ADMIN#2018##mysapbw_BW7_23635150#J2EE_ADMIN#c13b1ba1eec411dd9cbb00188b34fd33#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/Server/WebRequests#Plain###application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error.
    The error is: java.lang.NoSuchMethodError: com.sap.security.core.wd.umeuifactory.wdp.IExternalUmeUiFactoryCompInterface.hasSimplePermission(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
    Exception id: [00188B34FD33006C0000002600007AC8000461B1DE2BCF03]#
    #1.5 #00188B34FD33005F000004A300007AC8000461B1E07DB217#1233316510512#com.sap.engine.services.security.authentication.logonapplication#sap.com/com.sap.security.core.admin#com.sap.engine.services.security.authentication.logonapplication.doLogon#J2EE_GUEST#0##n/a##d88d4300eec411dd9ac900188b34fd33#SAPEngine_Application_Thread[impl:3]_6##0#0#Error##Java###doLogon failed
    [EXCEPTION]
    #1#com.sap.security.core.logon.imp.UMELoginException
         at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:949)
         at com.sap.security.core.logonadmin.ServletAccessToLogic.logon(ServletAccessToLogic.java:208)
         at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.doLogon(SAPMLogonLogic.java:914)
         at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.uidPasswordLogon(SAPMLogonLogic.java:578)
         at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.executeRequest(SAPMLogonLogic.java:158)
         at com.sap.security.core.sapmimp.logon.SAPMLogonServlet.doPost(SAPMLogonServlet.java:60)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Please help me in resolving this issue.
    Regards,
    Nallasivam.D

    Processing HTTP request to servlet dispatcher finished with error.
    Check std_dispatcher.out for errors.
    com.sap.security.core.logon.imp.UMELoginException
    Check your UME setting using configtool
    Regards
    Juan

  • After upgraded 9.2 DB, all users are not able to login (Except Guest).

    After completed the DB upgrade from 8.1.7.4 to 9.2.0, all users are not able to login the oraclemypage.home. This is except the Guest account.For example, I use the sysadmin account to login the oraclemypage.home. It shows "Your login is invalid. Please login again."
    Moreover, I do the following query.
    SQL> select fnd_web_sec.validate_login('SYSADMIN','SYSADMIN') from
    dual;
    FND_WEB_SEC.VALIDATE_LOGIN('SYSADMIN','SYSADMIN')
    N
    If I guery the Guest account, the result is "Y".
    Also, all users can access via dev60cgi/f60cgi to open E-business 11.5.7 application. Are there any missing script / process I need to do?
    Thanks,
    Matthew

    Hi Arun,
    What message u get on the apache logs / jserv logs when u get the error ?
    Since the log cumulate a giga byte, I clean up the log and test again. It seems no error message.Whats your platform?
    HP-UX 11.11To which version (5 digit) u upgraded DB ?
    Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
    I found a note 225074.1 that talks of a similar issue where users are ablt to login to forms but not php. this is for AIX. review the note.
    I had checked this previously. Part of this document already tried which suggested by Oracle Support.what is the end_date for all of these users in fnd_user table ? if all users for some reason is end_dated , then fnd_web_sec will show 'N"
    All users are normal. For those I tested without end_dated, I can access via f60cgi too.whats the session_cookie_domain set to in icx_parameters table? Set to NULL and try bouncing apache once.
    This set to ".mycompany.com". You mean that I set the session_cookie_domain to NULL and restart Apache, right? Why I need to set it NULL?

  • User not able to login for the role

    Hello All
    We are having 2 properties for the role assigned to user in portal. One is the "Entry Point" and the second one is "Invisible in Navigation Areas". We have customized the standard TLN par for our application. Due to which if we are setting any of the above property to "Yes" then i am not able to login into that role. As we are checking the navigation nodes only in TLN par.
    I need that role to be invisble in portal but user should be able to login into that role.
    Kindly help as i need to implement it urgently.
    Thanks & Regards
    Mandeep

    Hello Reddy,
    I have provided the code we are using to fetch te roles from navigation nodes. Navigation nodes are fetched for only visible roles not for invisible roles. Kindly refer the code and suggest some solution to fetch the heirarchy of the invisible role. In the code "My Purchases" & "Mis Compras" is our role.
    <nav:iterateInitialNavNodes currentNavNode="currNode">
                              <% String strCurrentNode = currNode.getTitle(myLoc);   
                                        if (strCurrentNode.equalsIgnoreCase("My Purchases")|| strCurrentNode.equalsIgnoreCase("Mis Compras")){                                               
                              %>
                              <%if(levels==2) { %>
                                                    <!-- Save selected node -->
                                                    <nav:storeNavNode/>
                              <% } %>
                              <% } %>                                
                              </nav:iterateInitialNavNodes>
    Regards
    Mandeep

  • User not able to login to MSA

    Hi,
    We have an issue in which the user is not able to login to MSA even though the user in there in the smousers table in the ides. While logging in it gives up an error that the User id or password is incorrect.
    I even changes the password for the employee but the situation is the same. While running the Conntrans, the B-Docs EMPLOYEE_WRITE as well as USER_WRITE is not processed. Hence I generated the Metadata for these two B-Docs by going to the Client Console. Still I face the same error.
    Please let me know what can I do to resolve this. Any pointers would be of great help.
    Regards,
    Rasmi.

    Hi,
    In your smoeac transaction you have to suscribe to the object :
    Authorization
    Authorization1
    Authorization 2
    User (USERNAME)
    If you've these it might be working,
    I had the same error message but it's not the id or the password like error message said it's just that customizing for authorization are not replicate as well
    Regards
    Edited by: Julien DESGEORGES on Jan 12, 2009 2:25 PM

  • User is not able to Login from external supplier, using the WSS (ICH)

    Hi Gurus,
    The user is not able to login to the server externally from url.
    dev_icm is giving below warnings:
    [Thr 11052] IcmWatchDogThread: watchdog started
    [Thr 11309] ** WARNING => HttpPlugInInit: Parameter icm/HTTPS/trust_client_with_issuer or icm/HTTPS/trust_client_with_subject not set  => do
    not trust any intermediary*
    X.509 cert data will be removed from header [http_plg_mt. 720]
    [Thr 11309] =================================================
    [Thr 11309] = SSL Initialization  on  IBM RS/6000 with AIX
    [Thr 11309] =   (700_REL,May  3 2008,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
    [Thr 11309]   profile param "ssl/ssl_lib" = "/usr/sap/SCA/SYS/exe/run/libsapcrypto.o"
               resulting Filename = "/usr/sap/SCA/SYS/exe/run/libsapcrypto.o"
    [Thr 11309] =   found SAPCRYPTOLIB  5.5.5C pl16  (Jun 10 2004) MT-safe
    [Thr 11309] =   current UserID: "scaadm",  env-var USER="scaadm"
    [Thr 11309] =   using SECUDIR=/usr/sap/SCA/DVEBMGS41/sec
    [Thr 11309] =  secudessl_Create_SSL_CTX():  PSE "/usr/sap/SCA/DVEBMGS41/sec/SAPSSLA.pse" not found,
    [Thr 11309] =      using PSE "/usr/sap/SCA/DVEBMGS41/sec/SAPSSLC.pse" as fallback
    [Thr 11309] = Success -- SapCryptoLib SSL ready!
    [Thr 11309] =================================================
    HTTPS (SSL) settings are as below, i think which means that no ssl certifiacts are required.
    icm/HTTPS/verify_client        = 0
    Kindly help urgently.
    regards,
    MJ

    this is SCM system.
    SSL CA's are set.
    what should be value of the parameters?
    icm/HTTPS/trust_ client_with_ issuer or
    icm/HTTPS/trust_ client_with_ subject
    http and https ssl conections are correctly set.
    I think the SAPSSLA. pse" not found, is not the problem as the parameter icm/HTTPS/verify_ client = 0 is set, it means that no ssl certifiacts are required.
    problem is coming when the system is being accessed from externally using other secure domain name.
    the system is being accessed ok from web urs which is internal, but not external.
    for example in strust tcode  the domain name is *abc.com, which is running fine when accessing the system internally.
    but when the user is accessing this sytem from other secure login from *xyz.com, which is also the same companys domain, then the user not able to login, its showing errir.

  • Existing users not able to login to Application

    Hi all,
    For satisfying one of the security requirement. We secured Entity dimension and created new member access profile and new team.
    For the new user and we (Admin team) has assigned this newly created team.
    Now only we (Admin team) and new user is able to access the system.
    Inorder for all other users to access the Application. Do we need to assign newly created team to all of them? is there any way to do it?
    Regards
    Abhishek

    Hi ABHISHEK BANSHIWALA,
    Since you have checked Entity dimension has secured now and created new Member access profile for new users.
    But for existing users who are using existing Member Access profiles which does not have Entity dimension defined this is the reason why they are not able to login to BPC Application.
    Please edit all the Member Access profiles and establish a reference to the ENTITY dimension for [ALL]
    Regards,
    Rajesh Muppala.

  • Users are not able to login to BPM worklist application from one of the AD.

    Hi ,
    We are using FMW11g ( 11.1.1.6.0) and configured 2 AD's.( AD-1 & AD-2). We are able to see users from both AD's in the weblogic admin console. Users present in AD-1 are able to login to BPM worklist application without any issue but users from AD-2 are not able to login to BPM application. Could any one please answer 1) Can we configure 2 AD's to FMW11g ? 2) If "YES" , what configuration needs to change to users login from AD-2.
    Please let me know if any more information need.
    Regard's
    Naveen

    Hi
    NO. You CANNOT use more than One Security Provider for a BPM Workspace Application. Only the top most first Security Provider will work. In your case you have 2 ADs security providers and only users from top most can login. Yes, you can see the Users from both and infact all the Security Providers that are configured. It is the limitation of the bpm workspace application and its corresponding security framework.
    Out of box, if you use default AD Configuration then there is nothing you can do. Only the first top most will work. If you really really want you need to use totally custom authentication provider where you will write your own code for authentication. Remember this development is pure weblogic security related one and you need to have good understanding of internal weblogic security. I would not recommend this.
    Here is one old post. This old post has 2 other old posts worth visiting to get more details:
    Re: Use multiple ActiveDirectory as authenticator provider
    Re: oracle soa and active directory integration (Different requirement/usecase)
    Thanks
    Ravi Jegga

  • User NOT able to login again to BSP application after logging off

    Hi Experts,
    What the user is doing?
    Step 1: User logged into BSP Application. Result: Successful login
    Step 2: User logged off from BSP Application. Result: Successful log off
    Step 3. User again tries to log into BSP Application with correct login credentials. Result : LOGIN FAILURE
    What is being displayed onto the screen after step 3?
    1. Login screen does not changes.
    2. It does not show any error/warning messages.
    3. Next screen, after login screen is NOT being displayed.
    What the user does next?
    User is deleting all the cookies & cache, and again trying to log into BSP application. Result : Successful login
    Question:
    Everytime, the user logs off from the BSP application, and again tries to login, he/she is NOT able to login without clearing the cookies and cache.
    First, the user has to clear cookies and cache, then ONLY he/she is able login.
    Can you please advice on this?
    Response will be highly appreciated.
    Regards,
    Mandar

    Hi,
    Refer http://help.sap.com/saphelp_nw04/helpdata/en/6b/9d91d062cc52419f23926ff1bf2ad3/content.htm
    BSP Application Login/Logoff and http://wiki.sdn.sap.com/wiki/display/BSP/Logon
    This may be helpful for your issue.
    Thanks,
    Chandra

  • Not able to login to User management link in portal

    Hi,
    I am not able to login to "User Management" link from index.html page. When I enter user name and password, only page is getting refreshed and it is not logging in.
    Error from default trace:
    #1.5 #00188B34FD33006C0000002800007AC8000461B1DE2BD2F2#1233316471589#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/tcwddispwda#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_ADMIN#2018##mysapbw_BW7_23635150#J2EE_ADMIN#c13b1ba1eec411dd9cbb00188b34fd33#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/Server/WebRequests#Plain###application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error.
    The error is: java.lang.NoSuchMethodError: com.sap.security.core.wd.umeuifactory.wdp.IExternalUmeUiFactoryCompInterface.hasSimplePermission(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
    Exception id: [00188B34FD33006C0000002600007AC8000461B1DE2BCF03]#
    #1.5 #00188B34FD33005F000004A300007AC8000461B1E07DB217#1233316510512#com.sap.engine.services.security.authentication.logonapplication#sap.com/com.sap.security.core.admin#com.sap.engine.services.security.authentication.logonapplication.doLogon#J2EE_GUEST#0##n/a##d88d4300eec411dd9ac900188b34fd33#SAPEngine_Application_Thread[impl:3]_6##0#0#Error##Java###doLogon failed
    [EXCEPTION]
    #1#com.sap.security.core.logon.imp.UMELoginException
         at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:949)
         at com.sap.security.core.logonadmin.ServletAccessToLogic.logon(ServletAccessToLogic.java:208)
         at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.doLogon(SAPMLogonLogic.java:914)
         at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.uidPasswordLogon(SAPMLogonLogic.java:578)
         at com.sap.security.core.sapmimp.logon.SAPMLogonLogic.executeRequest(SAPMLogonLogic.java:158)
         at com.sap.security.core.sapmimp.logon.SAPMLogonServlet.doPost(SAPMLogonServlet.java:60)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Please help me in resolving this issue.
    Regards,
    Nallasivam.D

    Hi,
    After looking into the error first i dont think you are enter the right password.
    In case if you are entering the right password then you might not have the necessary admin rights on portal.
    Regards,
    Ramanath

  • Not able to login using ORACLE USER in Linux

    I am not able to login using OS user ORACLE in linux,
    I am getting following error when trying to login
    /etc/X!!/gdm/PreSession/Default : Registering your session with wtmp and utmp
    /etc/X!!/gdm/PreSession/Default :running : /usr/bin/X11/sessreg -a -w /var/log/log/wtmp -u /var/run/utmp -x "/var/gdm/:0.Xservers" -h "" -1" : 0" "oracle"
    /etc/profile: line 17 : syntax error near unexpected token 'then'
    /etc/profile: line 17 ' if[ $USER = "oracle" ]; then'
    Failed to execute message bus daemon : No such file or directory
    EOF in dbus-launch reading address from bus daemon
    I tried to edit /etc/profile file but not sucessfull. Please help me out . This installtion is on VM ware
    Edited by: user12356407 on Dec 16, 2009 3:21 AM

    user8896383 wrote:
    I am not successful to login using Oracle User .
    I tried to edit /etc/profile file on Line 17 , but of no use.
    could you please be more precise about what exactly i should look in or edit in that file.
    Thanks for your immediate response.My car doesn't start
    I tried to fix it
    It still doesn't start.
    Can you be more precise in telling how to fix it.

Maybe you are looking for

  • Windows 7 wont install ('No Bootable Drive')

    This is EXACTLY what I've done: I've formatted and reformatted and partioned and wiped and formatted my hard drive innumerable times over the years. I have a Macbook Pro 4,1 (15-inch Early 2008). When I went to install Lion, I wanted a clean install,

  • Windows 8.1 (Bootcamp) goes into Auto Recovery after Yosemite Upgrade

    I upgraded to Yosemite and now my Windows 8.1 bootcamp won't boot up.  I still have the Windows bootcamp option when I hold "Option" on boot, but when I select Windows it goes directly into "Automatic Recovery". For the bootcamp partition all the opt

  • Help on understanding and writing PCRs

    dear members though i have some knowledge on india payroll, i do not know anything on writing a PCR (Personnel Calculation Rule). could you be kind enough to guide me and help me understand and write a PCR. shall be thankful for a prompt response.

  • Calling function LCR_LIST_BUSINESS_SYSTEMS

    Hi Guys Thank alot your the replies !! I have checked  RFC destinations LCRSAPRFC, SAPSLDAPI and INTEGRATION_DIRECTORY_HMI connections they all successful when I test them. The only thing the I don't understand is the password of the user from SLDAPI

  • Server automation ?

    Respected sir, We are working on project called "Server Automation". We have to do two things, 1)To Recover data of client after server crash. 2)Automatic shut down of server after all clients logged out. (This is the case in small LANS like in colle