Not able to login Weblogic Console with port 80

Hi Guys,
I was trying to access WebLogic Console with port 80, but failed. However, it works with port 8100. I have closed the IIS service and login PeopleSoft application successfully.
Did anyone run into this issue before?
Bob

Thank you for your input.
First, I am using the URL http://webserver:80/console to login to the console.
Second, the PIA is multi server domain.
Third, I re-created the PIA with new port so I think files setenv.cmd and config.xml have reflected any changes for the port numbers.
By the way, as I said, I have closed the service of IIS and can login PeopleSoft application with port 80 successfully. So, it should not be an issue with IIS.
Edited by: user10720710 on Mar 24, 2010 7:06 PM

Similar Messages

  • Not able to login UCM 11g with the users created in weblogic

    Hi,
    Users which I am creating in the weblogic server not getting reflected in UCM 11g.
    I am able to create the user successfully in weblogic. I am able to login to UCM using weblogic user and other few users created sometimes back.
    But all the new users which I am creating now, not able to login to UCM.
    I am using embedded LDAP in the weblogic.
    Please advise me to recover from this issue.
    Thanks,
    -Mukesh

    Hi Mukesh ,
    Check on UCM server if the JPS provider is showing the status as Good or not .
    If not then that is the reason for this . In that case stop ucm server , stop wls server , restart WLS and once it is up and running then start UCM server .
    After that test to see if the issue persists .
    Thanks
    Srinath

  • TS3988 Not able to login to icloud with my apple id and password

    Not able to login to icloud online. with my apple id and password, getting an error.

    Have you already set up the account in System Preferences>iCloud on a Mac or Settings>iCloud on an iOS device? If so are you sure you are using the correct ID? - many people have different IDs for iTunes and iCloud, and it's easy to get them confused.

  • Not able to access weblogic console to other systems .

    Hi All,
    I am working on two project so I am using JDeveloper 11.1.1.4 and JDeveloper 11.1.1.7 .
    For my usage I provide different port no for web logic servers .
    11.1.1.4  version JDeveloper have the PortNO 7101 .
    11.1.1.7  version JDeveloper have the PortNO 9101 .
    In local I can Run the two Jdeveloper applications at the same time but
    My problem is  ,
    For testing I am able to access http://127.0.0.1:7101/console/login/LoginForm.jsp  URL to other systems .
    But I am not able to  access http://127.0.0.1:9101/console/login/LoginForm.jsp URL to other systems .
    In log it's showing ,
    <Logger> <error> ServletContainerAdapter manager not initialized correctly ..
    How to access different port no web-logic console to other systems ?
    Thanks ,
    David ..

    Hi All,
    I resolved my issue by following below steps ,
    Goto ->Weblogic Console ->Home ->Default Domain -->Control -->Default Server -->Remove the data from Listen Address field .
    Now I can using two JDeveloper with different web-logic port no and the target URL can access from other systems .
    Thanks ,
    David .

  • Not able to open Admin console with other Administrator account other than "system"

    I am trying to create new users and add them to "Administrator" and "Administrators"
    so that they can access Admin console. I tried open up "http://localhost:7001/console"
    and entered in this new id and password, but it did not allow me in. At the same
    time if i enter "system" and "password" i was able to logon successfully.
    Can some one please let me know what i am missing here? Do i have to update any
    "Realm" files? And changes have to be made any other location?
    My idea is to have 3 people in different sub teams to access console and not use
    "system" user account.
    Please let me know if you need any more information.
    Thanks

    I've tried this in 6.1 and it doesn't seem to work. Is there a special
    configuration issue. essentially, I want to create a user name dev1 that has
    administrative privileges to start and stop selected servers within a
    domain.
    "Mihir Kulkarni" <[email protected]> wrote in message
    news:[email protected]..
    | An issue has been filed with engineering on this.
    | This feature is available in WLS 61, though!
    | mihir
    |
    | Kiran Meda wrote:
    |
    | > I am trying to create new users and add them to "Administrator" and
    "Administrators"
    | > so that they can access Admin console. I tried open up
    "http://localhost:7001/console"
    | > and entered in this new id and password, but it did not allow me in. At
    the same
    | > time if i enter "system" and "password" i was able to logon
    successfully.
    | >
    | > Can some one please let me know what i am missing here? Do i have to
    update any
    | > "Realm" files? And changes have to be made any other location?
    | >
    | > My idea is to have 3 people in different sub teams to access console and
    not use
    | > "system" user account.
    | >
    | > Please let me know if you need any more information.
    | >
    | > Thanks
    |

  • HT3529 I'm not able to login to iMessage with my apple ID, how to fix it?

    Hi, for some reasons the iMessage doesn't login my existing working apple ID, what would be the issue? I don't want to have multiple ID's.

    If you still have problem, contact iTune Support
    https://ssl.apple.com/emea/support/itunes/contact.html

  • After new weblogic domain configuration with oim 11g, not able to login

    After new weblogic domain configuration with oim 11g, not able to login for the frist time as xelsysadm.
    it says invalid sign in. and in logs it says password is invalid.
    Please help me in asap...

    Thanks Pallavi for the effort. I tried commenting out, its still the same. It do not throw exception this time. However, It tells me that the recon event is completed and linked to user. When I go to user's profile, I dont see the resource provisioned.
    Also,
    The Account ID in recon manager of Web Console and the Account ID that is stored in the tables, doesn't match.
    I wrote a custom code to fetch account and user details and here is the output,
    User Key : 13 -- has Login Id : USER_CS
    Account with account key : 49 is with user key : [USER_CS]
    Getting Account Data......
    {UD_TEST_1P_EMPLOYEENUMBER=1567, UD_TEST_1P_NAME=Kim1}
    However the Account Id in recon manager is : 91
    This seems fine.
    Doesn't this mean, the account is reconciled successfully?
    The problem is that, I am not able to see this resource in User's resource profile.
    Edited by: Shashi kiran on Apr 18, 2013 3:56 PM

  • User not able to login to Discoverer Plus 10g with Java 1.8 and Java1.6

    Hi,
    The user is using Windows machine and trying to login to Discoverer Plus 10g. He recently upgraded to Java 1.8 and was not able to login.
    We informed the user that Discoverer 10g is not compatible with java version above 1.6. The user removed the java 1.8 and installed 1.6 again.
    Still he is facing issue.
    The error he gets is:
    Unable to connect to the Discoverer Server: null
    Please contact your Oracle Application Server administrator
    Please suggest.
    1. Is there also a way to make it work with java 1,8 version as the user need to use it for the Oracle HRMS.?
    Thanks
    Chhavi

    Hi,
    The user is using Windows machine and trying to login to Discoverer Plus 10g. He recently upgraded to Java 1.8 and was not able to login.
    We informed the user that Discoverer 10g is not compatible with java version above 1.6. The user removed the java 1.8 and installed 1.6 again.
    Still he is facing issue.
    The error he gets is:
    Unable to connect to the Discoverer Server: null
    Please contact your Oracle Application Server administrator
    Please suggest.
    1. Is there also a way to make it work with java 1,8 version as the user need to use it for the Oracle HRMS.?
    Thanks
    Chhavi

  • Not able to Login with PS

    hi folks, i am not able to login with PS/PS in the Datamover and app desingner. It gives me the errore that the user name is not valid. My psdbowner table does not have any entry about the owner of my DB even after running the dbowner.sql. i tried to update this table but it gave me the message that no rows updated.

    <s>SYSADM is nothing but an Oracle user, when connecting with this user in DataMover, it's bootstrap mode. PS is different, whether it's an Oracle user, it should be locked, PS is also an application user (should exists in PSOPRDEFN). The latter is used when connecting to DMS/AppDesigner.
    1. Check the connectivity properties in Configuration Manager: connectid=people, connect password=peop1e
    2. Try to connect onto the database with people and check if you can select from tables PSACCESSPRFL, PSOPRDDEFN and PSDBOWNER
    3. From within the database, check the owner of the table PSDBOWNER (should be PS which must be locked).
    And please, try to give the answers to the questions above (what update statement...). If that's a fresh install, or you've missed some steps, or something went wrong during the initial load (check the logfile).</s>
    Due to the lack of information, I was going to the wrong way. Fortunately for Hick, Hakan rightly pointed out the step of the installation. And yes, PS Oracle user account is locked and nothing wrong to have PSDBOWNER empty at this stage, it is filled up when load the very first dms (there's a statement like INSERT INTO PS.PSDBOWNER VALUES...). I think some documentation reading here should not hurt.
    Sorry, but I'm really fed up with people providing too few information (or no information at all) about their situation. I give this thread up.
    Nicolas.
    Edited by: N Gasparotto on Jan 15, 2013 1:30 PM

  • FDQM - Not able to login with the admin user

    Hi,
    I am not able to login to FDQM web browser using the admin user. I am facing the error as below;
    Error: Error retreiving security agent header.
    Detail: InnerException1: Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\' is denied.
    I tried checking the Load Balance Configuration settings, where i found the Shared services Test connection was failing. But i am able to login to Shared services with admin user.
    Can any one please help me. It is most critical and your replies are most welcome & appreciated.
    Thanks
    Damodhar

    When was the last time you were able to login and what has changed since that time?
    Has someone changed access privileges to that specific location => Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\'?
    Thank you,
    Todd Rebner

  • SIM user is not able to login with hand held device

    SIM user of particular store is not able to login with handhel device but able to login with terminal.
    Please tell me whether it is configuration issue or data issue.

    You can check whether password is expired or not. Is it same login details used for SIM GUI? If so, are you able to login to GUI.

  • Not able to login with Firefighter ID

    Hi,
    I configured the SPM and was able to test the firefighter login  in our sandbox. Recently we upgraded from SP5 to SP8, since then I am not able to login with the firefighter id. When I try to access  the "Security" tab in /n/VIRSA/VFAT I am getting the error messge " These settings are NOT required anymore. with  Message no. /VIRSA/VFAT710 ".
    Any idea what might have changed and where should I look to fix this. Appreciate all your help.
    Thanks,
    Raj

    Hi,
    There was some security leak in the previous design of Firefighter in which we used to maintain the password in security table.
    So to overcome this issue, there is no need to maintain the password in security table as the logic has been changed by which the FFID login.
    So from SP07 onwards there is no need for security table.
    Regards,
    Shweta

  • Licensing problem with UCCX 7, agent not able to login at all

    Hi there,
    We have UCCX 7 server and CUCM 7.
    Problem is that we the agents are not able to login and they are getting maximum license error although not all licenses are used.
    We get the following errors when trying to login:
    1. "Maximum number of licenses reached. Please notify your System Administrator".
    2. When we click "Ok" for the error above, we get the following "A licensing error has occured. Please try again in five minutes. If the problem persists, please see your log file or System Administrator for details.".
    I checked the licensing service and it is working fine.
    The log for the licensing service is not indicating anything, it shows only the last time there was a failure in this service (this was 6 months ago after a restart). It was working fine until yesterday.
    I tried to disable the "IPCC Extension" under the User Configuration in the CUCM and enable it again, but did not solve the problem and got the same error.
    It is worth to mention that when I disabled the "IPCC Extension", before I enabled it again, I tried to login using CAD but I got the same exact error.
    Any help will be really appreciate, thanks a lot.

    Hi
    Open a command prompt on your UCCX server (not client) and go to this directory:
    C:\Program Files\Cisco\Desktop\bin
    Then run:
    showlicenseusage.exe
    THis will show you the IP addresses that are currently consuming licenses. You can check these PCs to see if they are still logged in - if they are, that's your problem. If they aren't, then you may have a problem with the LRM service or something.
    If it has logins listed that aren't really logged in, you might be able to restart the License and Resource Manager service from Control Center to resolve it temporarily.
    Aaron
    Please rate helpful posts..

  • Urgent:Not able to login 11g EM console, Error "Login operation failed"

    Hi Gurus,
    I have Oralcle DB 11.1.0.7.0 setup on Solaris.
    suddently the DB has gone down and i am not able to login to the Enterprise Manager console.
    While login its giving the error "Login Operation Failed"
    Please help me to ressolve this issue.
    Thanks
    Krishna

    Here are the results of your commands:
    HOME=/export/home/perfuser
    LOGNAME=perfuser
    MAIL=/var/mail//perfuser
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin
    PWD=/export/home/perfuser/app/perfuser/product/11.1.0/db_1/bin
    SHELL=/bin/csh
    SSH_CLIENT=10.159.44.193 1266 22
    SSH_CONNECTION=10.159.44.193 1266 64.181.147.61 22
    SSH_TTY=/dev/pts/5
    TERM=xterm
    TZ=US/Mountain
    USER=perfuser
    uid=884(perfuser) gid=268(ccuser)
    LSNRCTL for Solaris: Version 11.1.0.7.0 - Production on 21-AUG-2010 11:50:57
    Copyright (c) 1991, 2008, Oracle. All rights reserved.
    Message 1053 not found; No message file for product=network, facility=TNSTNS-12541: Message 12541 not found; No message file for product=network, facility=TNS
    TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
    TNS-00511: Message 511 not found; No message file for product=network, facility=TNS
    Solaris Error: 146: Connection refused
    LSNRCTL for Solaris: Version 11.1.0.7.0 - Production on 21-AUG-2010 11:51:09
    Copyright (c) 1991, 2008, Oracle. All rights reserved.
    Message 1053 not found; No message file for product=network, facility=TNSTNS-12541: Message 12541 not found; No message file for product=network, facility=TNS
    TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
    TNS-00511: Message 511 not found; No message file for product=network, facility=TNS
    Solaris Error: 146: Connection refused

  • Not able to login to BIP using OBIEE Admin credentials

    hi,
    I am not able to login into BI Publisher(http://<Server name>:7001/xmlpserver/) with my OBIEE Admin credentails. It throws an error "Unauthorized Access: please contact the administrator".
    I have checked in console that this Admin User has been assigned to Administrators and BIAdministrators group.
    Also I have a BISystemUser which is assigned to Administrators group.
    Don't know why it is not working as similar User and group setting onto a different server works.
    Regards,
    Bhavik

    Any suggestions would be helpful.

Maybe you are looking for