Not able to login with window AD account

Hi,
I did all the necessary configuration for windows AD in cmc,
Here are the steps,
I did the following configuration to set up the WINDOWS AD,
1.Configured  the service account for use with the AD plug in.
a)Created the service principal name (SPN) for service account
b)Set delegation for the service account.
2.configured the BI Plateform for use with  the service account
a)Add SPN to the CMC.
b)Set the  SIA to run as the service account
                c) verified that service account and windows AD login  account is
                working checked that no error message appeared and could see white screen
I tried login with my AD account credential in to CMC but shows error showing "not authorized to login"
can any1 please help
Thanks,
pavana

Ambarish,
is this the Kerberos configuration file, I need to set up
[libdefaults]
default_realm = DOMAIN.COM
dns_lookup_kdc = true
dns_lookup_realm = true
default_tkt_enctypes = rc4-hmac
default_tgs_enctypes = rc4-hmac
[domain_realm]
.domain.com = DOMAIN.COM
domain.com = DOMAIN.COM
.domain2.com = DOMAIN2.COM
domain2.com = DOMAIN2.COM
[realms]
DOMAIN.COM = {
default_domain = DOMAIN.COM
kdc = HOSTNAME.DOMAIN.COM
DOMAIN2.COM = {
default_domain = DOMAIN2.COM
kdc = HOSTNAME.DOMAIN2.COM
[capaths]
DOMAIN2.COM = {
DOMAIN.COM =

Similar Messages

  • Not able to Login with PS

    hi folks, i am not able to login with PS/PS in the Datamover and app desingner. It gives me the errore that the user name is not valid. My psdbowner table does not have any entry about the owner of my DB even after running the dbowner.sql. i tried to update this table but it gave me the message that no rows updated.

    <s>SYSADM is nothing but an Oracle user, when connecting with this user in DataMover, it's bootstrap mode. PS is different, whether it's an Oracle user, it should be locked, PS is also an application user (should exists in PSOPRDEFN). The latter is used when connecting to DMS/AppDesigner.
    1. Check the connectivity properties in Configuration Manager: connectid=people, connect password=peop1e
    2. Try to connect onto the database with people and check if you can select from tables PSACCESSPRFL, PSOPRDDEFN and PSDBOWNER
    3. From within the database, check the owner of the table PSDBOWNER (should be PS which must be locked).
    And please, try to give the answers to the questions above (what update statement...). If that's a fresh install, or you've missed some steps, or something went wrong during the initial load (check the logfile).</s>
    Due to the lack of information, I was going to the wrong way. Fortunately for Hick, Hakan rightly pointed out the step of the installation. And yes, PS Oracle user account is locked and nothing wrong to have PSDBOWNER empty at this stage, it is filled up when load the very first dms (there's a statement like INSERT INTO PS.PSDBOWNER VALUES...). I think some documentation reading here should not hurt.
    Sorry, but I'm really fed up with people providing too few information (or no information at all) about their situation. I give this thread up.
    Nicolas.
    Edited by: N Gasparotto on Jan 15, 2013 1:30 PM

  • I am not able to login to my facebook account and error message reads "This web site does not supply ownership information." Please help

    I am not able to login to my facebook account and error message reads "This web site does not supply ownership information." Please help
    only title bar opens and nothing else....please help

    Normally, when you connect via http, the browser doesn't check for site identity, so I don't understand what's happening there.
    Do you have any security-related add-ons that force popular sites to use a secure connection, or claim to provide anonymous browsing?
    Were you making the connection on your own network or on a public network (e.g., school, coffee shop)? If it was a public network, maybe the error indicates that your traffic was being intercepted???
    Without hands on, this is a tough one to diagnose.

  • SIM user is not able to login with hand held device

    SIM user of particular store is not able to login with handhel device but able to login with terminal.
    Please tell me whether it is configuration issue or data issue.

    You can check whether password is expired or not. Is it same login details used for SIM GUI? If so, are you able to login to GUI.

  • Not able to login with Firefighter ID

    Hi,
    I configured the SPM and was able to test the firefighter login  in our sandbox. Recently we upgraded from SP5 to SP8, since then I am not able to login with the firefighter id. When I try to access  the "Security" tab in /n/VIRSA/VFAT I am getting the error messge " These settings are NOT required anymore. with  Message no. /VIRSA/VFAT710 ".
    Any idea what might have changed and where should I look to fix this. Appreciate all your help.
    Thanks,
    Raj

    Hi,
    There was some security leak in the previous design of Firefighter in which we used to maintain the password in security table.
    So to overcome this issue, there is no need to maintain the password in security table as the logic has been changed by which the FFID login.
    So from SP07 onwards there is no need for security table.
    Regards,
    Shweta

  • FDQM - Not able to login with the admin user

    Hi,
    I am not able to login to FDQM web browser using the admin user. I am facing the error as below;
    Error: Error retreiving security agent header.
    Detail: InnerException1: Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\' is denied.
    I tried checking the Load Balance Configuration settings, where i found the Shared services Test connection was failing. But i am able to login to Shared services with admin user.
    Can any one please help me. It is most critical and your replies are most welcome & appreciated.
    Thanks
    Damodhar

    When was the last time you were able to login and what has changed since that time?
    Has someone changed access privileges to that specific location => Access to the path 'D:\Oracle\Middleware\EPMSystem11R1\logs\fdm\Common\'?
    Thank you,
    Todd Rebner

  • Not able to login with domain account on Win10 Enterprise build 10049

    On my Windows 10 Enterprise technical preview machine (build 10049), it locked out after inactivity and now only offers the option to login with "Other user". On this screen, it only seems to want a Microsoft account, although if I enter a valid
    Microsoft account it says the password is wrong. It won't accept a domain account, and it does not seem to offer any way to switch to the normal domain login screen.
    I am locked out of the PC and unable to use it. When I reboot, it goes back to the same login screen.
    Help!

    Hi,
    Is the system joined to a domain? If a machine is joined to a domain, then after restart, the domain name should be displayed under "Other User" even though it doesn't display other user accounts. See snapshot below:
    And for domain account, please make sure to type the format as domain\username
    While if you have other local user account, then I recommend you login to that user acocunt (format as .\localusername) check the system info and check the policy below:
    Local Security Policy\Local Policies\Security policies\Interactive logon: Do not display the last user name, it should be "Not configured" or "Disabled".
    Rrgards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Not able to login with new LDAP user in portal..

    All,
    We have created a new user in our LDAP environment in Portal. ( not UME ). I am able to view the user id in Identity management and assigned the necessary roles. but, i am unable to login using the new user id. Can anybody please tell me what is missing here ? Thanks in advance.

    Hi Addy,
    As Raghu said, this seems to be a password problem.
    Log into the Portal as an User administrator.
    Find the user and Click on Modify.
    In User Information, Add a new password.
    Then try to login with the given user id again with the new password.
    Good Luck!!!
    Biroj Patro

  • Not able to login with AEM 6.0 Configuration

    HI All,
    After Migrating to OAK  (CRX3) Repository i am unable to login and getting as below error
    Also I configured Jackrabbit Oak LdapIdentity Provider, Jackrabbit Oak Default Sync Handler and Jackrabbit Oak External Login Module
    So basically i am not getting Login(welcome) Screen but I could able to login to OSGI console
    *ERROR* [qtp1173581562-32] com.day.cq.auth.impl.LoginSelectorHandler requestCredentials: Abort login due to apparent misconfiguration.
    *ERROR* [qtp1173581562-32] com.day.cq.auth.impl.LoginSelectorHandler requestCredentials: Possible reasons: login page not existing or not accessible
    Inputs would be Appriciated!!!

    Hi,
    "IF someone can help me and to guide me how enable this SAP* using or adding or amending the parameter 'login/no_automatic_user_sapstar' = '0' Zero"
    - Please set the parameter login/no_automatic_user_sapstar = 0 in Default profile and restart instance to activate SAP* with password PASS. If same parameter exists in Instance profile, please change there also before restart.
    As soon as you login with SAP*, please reset the password of DDIC in client 800.
    "Also I have created some users for learning and testing propose but I have give SAP_ALL authorization in the profile but What I have understood is giving SAP_ALL making the user super User (plz correct me if I am wrong)
    So What profile WE must select so that a normal user who can be able to use most of the task and learn the ABAP or other features configured"
    - You can assign SAP_NEW and SAP_CUST or equivalent customized profiles/roles to users for learning and testing propose.
    "And What profile does this user has to be in because the faculty from whom I am learning BASIS told me it has to be in client "800" if this is correct then how can I copy a user from one client to another client"
    - You can copy entire user master (profile SAP_USER) from one client to other using local client copy (SCCL).
    Hope you are answered.
    Thanks,
    Siva Kumar

  • Not able to login with IE

    I was trying to get into the forum but was not able to get into discussion forum. whenever i clicked i got dome authorization failed message. This is even before trying to log in

    A different message but i am not able to post the message. Refreshing multipletimes solves it temporarily

  • Not able to login with privilege levels

    Hi,
       i have created privilege levels in cisco switch especially level 7 if i login with that username and password ,after typing privilege mode password it is going to level 15.... what is the problem ........
    commnads i configured is :
    # username cisco level 7 password cisco
    #enable secret cisco
    ............please help me where i have gone wrong

    Hi, What model/IOS version that you use?
    Rating useful replies is more useful than saying "Thank you"

  • Not Able To Login With Previous Apple ID

    Can a Mod pleaae help me? I was unable to login in to the new forums system with my old
    Apple ID. I had to create anothger ID using another email address. I would like my old ID back.
    My alias jaco23. Can a mod please help me? reset my old ID please?
    Jaco

    I can't either!  Been going on for a week now.  I kept getting thie following error with a form to send in for help which I did 7 times and never heard back:
    We're sorry. Your account could not be updated due to system issues.
    Please contact Apple Support Communities with the information below to update your account.
    It took me 5 times to create a new id and I want my old one back since I've been on the forums for years now and I want to access my info I've saved there.  What can we do?  Thanks

  • WLS not able to login with OID user

    Hi
    I have installed WLS 10.3.3 and had configured a new security realm which had OID as the authenticator . Set the details for the provider (OID) and updated , restarted the server . It was working fine till yesterday and I verified this by logging in to the WLS console with the OID user .
    But now out of nowhere the login for OID users have started failing for the applications that are running on WLS . When tested the login for WLS console with the same OID user that is failing as well .
    Not sure what to trace and how to figure out what is happening . Have verified that OID is working fine and this was done by hooking up OID to a standalone application and logging in with the OID users to that app.
    Any help / pointers would be of great help .
    Thanks
    Srinath
    Edited by: Srinath Menon on Nov 24, 2010 9:31 AM

    Try enabling sap* user again and once its enabled, use the user to provide yourself the necessary access.
    For enabling sap* user, follow <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/frameset.htm">Enabling SAP* user</a>
    Pradeep

  • Anyconnect is not able to run with windows routing & remote access service

    I am unable to connect with the new Anyconnect VPN installation when it tries to connect, it raises an alert that says, "The Windows Routing and Remote Access service is not compatible with the VPN client. The VPN client cannot operate when this service is running."
    I have a Dell system laptop, OS is XP SP2 with all the latest Windows updates up to SP2. My internet connection is DSL modem. Internet hardware is an
    external adapter connected to my USB port. The adapter is controlled by the Routing and Remote Access service mentioned in the alert message.
    Can anyone help me how we can solve this issue. I appreciate the help and currently some of the users can not connect to my network who works from home.
    Thanks
    Chandru

    I believe that Chandru's concern is in his statement that his DSL modem is controlled by the RAS service.
    I agree with Andrew that Chandru probably does not need the RAS enabled. I have used several Dell laptop running XP and connected to DSL just fine without needing RAS. If there is some aspect of how the laptop is configured that results in needing RAS for the modem then perhaps Chandru can clarify this for us.
    HTH
    Rick

  • Not able to login with operator(user id) in datamover

    After db setup and running tools rel and other scripts i am trying to login to data mover using PS/PS or any other op id...I am getting
    "Invalid user and password logon denied" error...
    Ran grant and checked config manager also but of no use does any one have idea??
    I am using
    Oracle 11g
    Peopletools 8.53
    HCM FP2
    RHEL 6 64bit
    Thanks in advance!!!

    I have set app profile unlocked but havent set a global password just gave connect id and password as people/peop1e and app serv id and password as PS/PS and for Web as PTWEBSERVER/PTWEBSERVER......
    My dms Looks like,
    REM - hcmdm111ora.dms
    REM - Created by Data Mover 8.53 Fri Feb 08 22:58:28 2013
    REM -
    REM - Database Platform: Oracle
    REM - Unicode Database
    REM - Selected Character Set: AL32UTF8 - AL32UTF8
    REM - Generate Latin-1 Code
    REM -
    REM - PeopleSoft HR Database - US English
    SET LOG E:\PT853\log\hcengs.log;
    SET INPUT E:\PT853\data\hcengs.db;
    SET COMMIT 30000;
    SET NO VIEW;
    SET NO SPACE;
    SET NO TRACE;
    SET UNICODE ON;
    SET IGNORE_DUPS;
    SET ENABLED_DATATYPE 9.1;
    IMPORT *;
    REM - PeopleSoft HR Database - US English
    SET LOG E:\PT853\log\hcengl.log;
    SET INPUT E:\PT853\data\hcengl.db;
    SET COMMIT 30000;
    SET NO VIEW;
    SET NO SPACE;
    SET NO TRACE;
    SET UNICODE ON;
    SET IGNORE_DUPS;
    SET ENABLED_DATATYPE 9.1;
    IMPORT *;
    REM - Final Database cleanup
    REM -
    REM - Based on your inputs to Database Setup, you will be using
    REM - ConnectID's to connect to your PeopleSoft Application
    REM -
    UPDATE PSOPRDEFN SET ACCTLOCK = 1;
    INSERT INTO PS.PSDBOWNER VALUES('HCMDM111', 'SYSADM');
    UPDATE PSSTATUS SET OWNERID = 'SYSADM';
    UPDATE PSOPRDEFN SET SYMBOLICID = 'SYSADM1';
    UPDATE PSOPRDEFN SET OPERPSWD = OPRID, ENCRYPTED = 0, ACCTLOCK = 0 WHERE OPRID NOT IN('PS','PTWEBSERVER');
    UPDATE PSOPRDEFN SET OPERPSWD = 'PTWEBSERVER', ENCRYPTED = 0, ACCTLOCK = 0 WHERE OPRID = 'PTWEBSERVER';
    UPDATE PSOPRDEFN SET OPERPSWD = 'PS', ENCRYPTED = 0, ACCTLOCK = 0 WHERE OPRID = 'PS';
    UPDATE PSACCESSPRFL SET ACCESSID = 'SYSADM', SYMBOLICID = 'SYSADM1', ACCESSPSWD = 'SYSADM', VERSION = 0, ENCRYPTED = 0;
    UPDATE PSOPTIONS SET LICENSE_CODE = '117fefffff8fffffebfb197c32sm64u', LICENSE_GROUP = '1';
    UPDATE PS_INSTALLATION SET
    HGA='Y', BENEFIT_ADMINISTRN='Y', PSERECRUIT='Y', CCU='Y', DI='Y', INSTALLED_GP_ARG='Y',
    INSTALLED_GP_AUS='Y', INSTALLED_GP_BRA='Y', INSTALLED_GP_CHN='Y', INSTALLED_PAY_GBL='Y',
    INSTALLED_GP_FRA='Y', INSTALLED_GP_DEU='Y', INSTALLED_GP_HKG='Y', INSTALLED_GP_IND='Y',
    INSTALLED_GP_ITA='Y', INSTALLED_GP_JPN='Y', INSTALLED_GP_MYS='Y', INSTALLED_GP_MEX='Y',
    INSTALLED_GP_NLD='Y', INSTALLED_GP_NZL='Y', INSTALLED_GP_SGP='Y', INSTALLED_GP_ESP='Y',
    INSTALLED_GP_CHE='Y', INSTALLED_GP_THA='Y', INSTALLED_GP_UK='Y', INSTALLED_GP_USA='Y',
    EHC='Y', HR='Y', FO_PBM='Y', INSTALLED_PAY_INT='Y', ADP='Y', INSTALLED_PAY_NA='Y',
    PA='Y', RSRW='Y', ST='Y', SPN='Y', PSERECRUIT_MGR='Y', TL='Y', PSEBENEFITS='Y', PSECOMP='Y',
    PSECOMP_MGR='Y', PSEA='Y', PSEPAY='Y', PSEPERF_MANAGEMENT='Y', PSEPROFILE='Y', PSEPROFILE_MGR='Y';
    GRANT SELECT ON PSSTATUS TO PEOPLE;
    GRANT SELECT ON PSOPRDEFN TO PEOPLE;
    GRANT SELECT ON PSACCESSPRFL TO PEOPLE;
    REM - ENCRYPT PASSWORD
    SET LOG E:\PT853\log\encrypt.log;
    ENCRYPT_PASSWORD *;
    REM - CREATE TRIGGERS
    SET LOG E:\PT853\log\triggers.log;
    CREATE_TRIGGER *;
    REM - CREATE VIEWS
    SET LOG E:\PT853\log\views.log;
    REPLACE_VIEW *;
    REM - CREATE TEMP TABLES
    SET LOG E:\PT853\log\temptbls.log;
    CREATE_TEMP_TABLE *;
    Edited by: ajith on Feb 9, 2013 5:47 PM
    Edited by: ajith on Feb 9, 2013 5:48 PM

Maybe you are looking for

  • Error in crystal report

    Hi, I am getting an error while I try to run a crystal report with Stored proc. I was running fine, except I added one new paramaeter in stored proc. The error is "Cannot Determine the quries to get the date for this report" . the SP is runninmg fine

  • How to display intial value in messagechoice

    hi, i want to show some intial value in picklist as soon as the page gets open other than the values from the VOquery, i need to show intial value like(Select). i tried giving programitically by using the property messageChoiceBean.setDefaultValue("s

  • Can't get commit method to work with Data service

    Hello I am trying to write changes to a database from a combo box. I am using the commit method as follows TblsituationService.commit(); But I am getting the following error message 1061: Call to a possibly undefined method commit through a reference

  • Order creation using workflow

    Hello, I'm trying to create sales order automatically using event triggered by user status changes. I need no user participation in this process. Can i use workflow for this purpose? As i see from documentation' examples user activity is needed...Do

  • Javax.mail.MessagingException: 505 Authentication required

    Could any one provide ,what would be the reasons for the following error information. [5/7/07 0:16:21:853 EDT] 11ba7fef SystemOut O DEBUG SMTP RCVD: 505 Authentication required [5/7/07 0:16:21:853 EDT] 11ba7fef SystemOut O DEBUG SMTP SENT: QUIT [5/7/