Not able to logon into repository Explorer in CR 2011

Hi experts,
I have CR 2011 installed on a native machine and this machine is connected to the server where CR server 2011 is installed.
But when I try to login into the Repository Explorer from the native machine it is not allowing me to do so.
But in the server everything is running fine.
How to resolve this

Hello,
What is the error message that you are getting?
Do you use the same user account from the client machine and the one used on the server? (if not try with the same account, it might be a rigths issue)
Thanks
Philippe

Similar Messages

Not able to start 'INTEGRATION REPOSITORY' but able to start 'DIRECTORY'.

Hi Gurus,
In the XI Infrastructure tools --->
i am able to start 'integration directory ' and able to logon.
But not able to start 'integration repository' , i end up getting the message'
Unable to start integration builder ' with details 'Failed to load resource'.
I have seen all the blogs related to this issue , but have not come across this
scenario where one works and other does not.
this error message is shown in details
unable to load resource :http ://XXXX:50000/rep/rep/repository/aii_proxy_gen.jar
please help me.
Message was edited by:
khan voyalpad usman

Hi,
It seems that jar files for IR has not been imported into your local machine and that is the reason it is not opening. What happens when you click on IR is, it just connect to your server and imports the neccessary jar files to your local machine but some time if system is very busy then the connection breaks, so in this case you may have to click many times on IR so that all jar fils will be imported on your local machine. The percentage of jar files imported will be displayed at the time of import and at the same time if conncetion goes down then next time it starts from the point where it got disconnected (not from the starting). I guess this is the problem.
Regards,
Sarvesh

Could not able to login into Oracle

Hi ,
I am using Oracle 9i as Database .
I am not able to login into Database please help .
when i tried with system and admin it displays : Invalid username/password ; logon denied
when i tried with scott/tiger : It displays account is locked.
Please help how can i resolve .

Thank you.
i opened a cmd prompt and ran your command
It displayed all these , sorry i dont know what to eliminate so posting the full .
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\sai>set
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\sai\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=GECE-8403C670A1
ComSpec=C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\sai
JSERV=D:\oracle\ora90/Apache/Jserv/conf
LOGONSERVER=\\GECE-8403C670A1
NUMBER_OF_PROCESSORS=2
OLAP_HOME=D:\oracle\ora90\olap
OS=Windows_NT
Path=D:\oracle\ora90\bin;D:\oracle\ora90\Apache\Perl\5.00503\bin\mswin32-x86;C:\
Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Sys
tem32\Wbem
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0d
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\sai\LOCALS~1\Temp
TMP=C:\DOCUME~1\sai\LOCALS~1\Temp
USERDOMAIN=GECE-8403C670A1
USERNAME=sai
USERPROFILE=C:\Documents and Settings\sai
windir=C:\WINDOWS
WV_GATEWAY_CFG=D:\oracle\ora90\Apache\modplsql\cfg\wdbsvr.app
C:\Documents and Settings\sai>sqlplus
SQL*Plus: Release 9.0.1.0.1 - Production on Sat Jan 2 22:56:31 2010
(c) Copyright 2001 Oracle Corporation. All rights reserved.
Enter user-name: / as sysdba
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production
With the Partitioning option
JServer Release 9.0.1.1.1 - Production
SQL> select * from v$version
2 ;
BANNER
Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production
PL/SQL Release 9.0.1.1.1 - Production
CORE 9.0.1.1.1 Production
TNS for 32-bit Windows: Version 9.0.1.1.0 - Production
NLSRTL Version 9.0.1.1.1 - Production

Administrator Not able to login into EP

Hi,
Adminitsrator not able to login into Portal system. I could access succesfully in visual admin .
Other users can enter in portal screen. I have reset administrator password even then not able to login..
- Kritene

Hi Kristene,
The admin user can get locked due to numerous unsuccessful logon attempts. To correct this situation, you have to use an emergency user SAP*. In the SAP Library, use the following path: "SAP Library -> SAP NetWeaver Library -> SAP NetWeaver by Key Capability -> Security -> Identity Management -> User Management Engine -> Administration of Users, Groups, and Roles -> Activating the Emergency User".
Log on to the Visual Administrator using the emergency user and unlock the Administrator user. Afterwards, deactivate the emergency user.
Regards,
Pooja.

Administrator Not able to login Into Portal

Hi,
Adminitsrator not able to login into Portal system. I could access succesfully in visual admin .
Other users can enter in portal screen. I have reset administrator password even then not able to login..
- Kritene

Hi Kristene,
The admin user can get locked due to numerous unsuccessful logon attempts. To correct this situation, you have to use an emergency user SAP*. In the SAP Library, use the following path: "SAP Library -> SAP NetWeaver Library -> SAP NetWeaver by Key Capability -> Security -> Identity Management -> User Management Engine -> Administration of Users, Groups, and Roles -> Activating the Emergency User".
Log on to the Visual Administrator using the emergency user and unlock the Administrator user. Afterwards, deactivate the emergency user.
Regards,
Pooja.

SAP system not starting or not able to logon to SAP system

Hi All,
Our OS is AIX5.3
DB is Oracle 10.2
And the machine is in cluster for HA. Cluster is running fine.
I am starting SAP using startsap all, the command shows that database and all instances have been started successfully. But we are not able to logon to the system.
Following is the output of startsap command and dpmon command :
bash-3.00$ startsap all
Checking ARP Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
14:45:38 11.10.2008   LOG: Effective User Id is root
This is Saposcol Version COLL 20.95 700 - AIX v11.15 5L-64 bit 080317
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 286752) is already running .....
saposcol already running
Running /usr/sap/ARP/SYS/exe/run/startdb
Trying to start ARP database ...
Log file: /home/arpadm/startdb.log
ARP database started
/usr/sap/ARP/SYS/exe/run/startdb completed successfully
Starting SAP Instance ASCS00
Startup-Log is written to /home/arpadm/startsap_ASCS00.log
Instance Service on host sapprodail started
Instance on host sapprodail started
Starting SAP Instance DVEBMGS01
Startup-Log is written to /home/arpadm/startsap_DVEBMGS01.log
Instance Service on host sapprodail started
Instance on host sapprodail started
bash-3.00$
bash-3.00$ dpmon
dpmon=>sapparam(1c): No Profile used.
dpmon=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
DpMonInit failed - possibly no dispatcher running
DpMon: External/Internal dplib version: 110/237
bash-3.00$
Developer trace out put is as follows
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno      01
sid        ARP
systemid   324 (IBM RS/6000 with AIX)
relno      7000
patchlevel 0
patchno    159
intno      20050900
make:      single threaded, Unicode, 64 bit, optimized
pid        295220
Sat Oct 11 14:46:22 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 295220) [dpxxdisp.c   1254]
        shared lib "dw_xml.so" version 159 successfully loaded
        shared lib "dw_xtc.so" version 159 successfully loaded
        shared lib "dw_stl.so" version 159 successfully loaded
        shared lib "dw_gui.so" version 159 successfully loaded
        shared lib "dw_mdm.so" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapprodail_ARP_01                       <
DpShMCreate: sizeof(wp_adm)             19200   (1600)
DpShMCreate: sizeof(tm_adm)             5941560 (29560)
DpShMCreate: sizeof(wp_ca_adm)          24000   (80)
DpShMCreate: sizeof(appc_ca_adm)        8000    (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm)           548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0       (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)           0       (72)
DpShMCreate: sizeof(vmc_adm)            0       (1864)
DpShMCreate: sizeof(wall_adm)           (40056/36728/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY             (addr: 0x700000000126000, size: 6626392)
DpShMCreate: allocated sys_adm at 0x700000000126000
DpShMCreate: allocated wp_adm at 0x7000000001280f8
DpShMCreate: allocated tm_adm_list at 0x70000000012cbf8
DpShMCreate: allocated tm_adm at 0x70000000012cc58
DpShMCreate: allocated wp_ca_adm at 0x7000000006d7590
DpShMCreate: allocated appc_ca_adm at 0x7000000006dd350
DpShMCreate: allocated comm_adm at 0x7000000006df290
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000000764f70
DpShMCreate: allocated gw_adm at 0x700000000764ff0
dev_disp (58%)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)           0       (72)
DpShMCreate: sizeof(vmc_adm)            0       (1864)
DpShMCreate: sizeof(wall_adm)           (40056/36728/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY             (addr: 0x700000000126000, size: 6626392)
DpShMCreate: allocated sys_adm at 0x700000000126000
DpShMCreate: allocated wp_adm at 0x7000000001280f8
DpShMCreate: allocated tm_adm_list at 0x70000000012cbf8
DpShMCreate: allocated tm_adm at 0x70000000012cc58
DpShMCreate: allocated wp_ca_adm at 0x7000000006d7590
DpShMCreate: allocated appc_ca_adm at 0x7000000006dd350
DpShMCreate: allocated comm_adm at 0x7000000006df290
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000000764f70
DpShMCreate: allocated gw_adm at 0x700000000764ff0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000000765020
DpShMCreate: allocated wall_adm at 0x700000000765028
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)
EsStdUnamFileMapInit: ES base = 0x0x700000030000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
WLM Tag 'ARP/DSP' successfully set for this process
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1656]
***LOG Q0K=> DpMsAttach, mscon ( sapprodail) [dpxxdisp.c   11937]
DpStartStopMsg: send start message (myname is >sapprodail_ARP_01                       <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Sat Oct 11 14:46:32 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Please help me step by step to solve this problem.
Regards
Edited by: Infoseek Sap123 on Oct 12, 2008 8:22 AM

The command is
dpmon pf=/usr/sap/SID/SYS/profile/<profile>
Regards

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Not able to log into Verizon Cloud on Galaxy Note Pro 12.2

Not able to log into Verizon Cloud getting a message that my phone number has changed and that I should factory data reset the device and then restart to setup my cloud account. I have not changed numbers and don't want to factory data reset.
Any Ideas?
Thanks

That is really odd, ThePathfinder. I too would be a bit weary of doing that, but the factory reset isn't as bad as it used to be. Let's try this step first before even considering that route. If you go to Settings > App Manager > All Verizon Cloud > Can you clear the apps cache and data, and possibly uninstall any updates for it? This may be enough to clear past info stored for the app, and may allow you to sign in with no issues.
NicandroN_VZW
Follow us on twitter @VZWSupport

I'm not able to sign into business catalyst

I'm not able to sign into business catalyst with my Adobe ID and I have not recieved any other log in information.

Hi BPrather,
Please reach out to support and we will be able to assist you with the issue you are facing: http://helpx.adobe.com/contact.html?product=business-catalyst&topic=signing-in-to-my-accou nt-or-registering-my-product.
Thanks.

HT4623 After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off.

After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off. has anyone else had this problem with it being "stuck"?

Basics from the user guide have always been, and still remain, restart, reset, restore from backup, restore as new.

Yahoo server unavailable. I am not able to get into yahoo account. iPhone 4S

Yahoo server unavailable. I am not able to get into yahoo account to check/send email. I have a new iPhone 4 S.
Can anybody help.
Thanks.

When setting up you email, do not click on the Yahoo! Use "Other" and follow the promps. Use imap.mail.yahoo.com as your Incoming Mail Server, and smtp.mail.yahoo.com as your Outgoing Mail Server.
This should fix it

I am not able to get into icloud account my device flashs following message maximum numbers of free account has been activated on this iphone pls help me to rectify

i am not able to get into icloud account my device flashs following message, maximum numbers of free account has been activated on this iphone pls help me to rectify

you are only able to use up to 3 icloud accounts on an ios device.
your only option is to use one of the accounts you already have.

I am not able to log into FaceBook on my macbook pro using my Apple ID

I am not able to log into FaceBook on my macbook pro using my Apple ID

Then, what razmee209 says. It's apparently not a phone issue since other people can get in, so I'd call the facebook app developer and let them know what's going on.

I am NOT able to sign into iCloud on my computer?

icloud came with Windows 8 on my new computer. I have an iTunes account but I currently do not have any Apple products such as an iPad, iPod,Etc
my phone is a samsung galaxy s4. I am NOT able to sign into iCloud on my computer? Well I'm not be able to use iCloud without another Apple product?
<Re-Titled By Host>

You can only create an iCloud account on an iOS device (iPhone, iPad or iPod Touch) or Mac. If you don't have one of these, you will not be able to create an iCloud account.

Not able to log into (IR,ID,SLD,RWB) j2EE Engine.

Dear Experts,
We have SAP PI 7.0 installed in our landscape. Clients 110 and 100 are created. User ABCD is created in 110 with all (SAP_XI, SAP_SLD, SAP_BC_AI* and SAP_NEW, SAP_ALL) privileges.
I am able to log into 110 with user ABCD. But, I am not able to log into IR, ID, SLD and RWB. I think PI 7.0 by default will be installed on client 001 and later we need to do some settings to make it point to client 110.
Can you please provide me some notes/blogs/links to solve this issue? Thanks in Advance.

Hi PhaniKumar,
Read below sap note.
for SAP NetWeaver 7.0
Note 940309 - Change PI default client after NW 7.0 Installation
For SAP NetWeaver for PI 7.10
Note 1115280 - Running SAP NW for PI in a different client
Regards
Ashok
Edited by: Ashok Dalai on Nov 4, 2008 7:34 AM

Not able to logon into repository Explorer in CR 2011

Similar Messages

Maybe you are looking for