Not able to memory dump and create a memory.dmp file in the path: %SystemRoot%\Minidump

This question is a part of my job profile. I work for an MNC chip maker. As a part of our systems testing environment, we boot into the Microsoft windows 8.1 windows OS and run some specific tests from the OS. The platform design (mother board) is an internal
design.
Issue is with the booting sequence since no much information is available when Windows 8.1 tries to boot and when we see the splash screen. Especially when we see a BSOD, there had been no leads.
I tried to enable the small memory dump option in Windows 8.1 OS which tries to write the files into the location %SystemRoot%\Minidump on a system crash while boot. Please note that Windows 8.1 has been stored as a .VHD file in the hard disk (which
is the boot-disk). The issue is, even in an event of a BSOD while booting, I am not able to see any memory dump files that had been logged in that location.
Is this issue would have been caused by the VHD file format since it is a virtualized disk ? Please let me know what all the issues could be, so that I can have some memory logs here to look into. May be analyze the Windows debugger.
Best Regards
Akhil

Hi,
The causes why Windows does not save memory dump file after a crash are listed in the link below:
http://support.microsoft.com/kb/130536
I suggest you check the space, make sure that there's enough room for the memory dump file.
And this blog can also be helpful
No kernel memory dump created on Windows 7 or Windows 8
http://blogs.technet.com/b/yongrhee/archive/2012/08/27/no-kernel-memory-dump-created-on-windows-7-or-windows-8.aspx
Yolanda Zhu
TechNet Community Support

Similar Messages

Not able to deploy HumanTask and Decision service using ant file

Hi all,
I am using ant file to complile and deploy a bpel process. Currently i am able to compile the bpel process and deploy it. But when it come to deploying humantask and decesion services I am getting a message.
[deployDecisionServices] There are no decision services to deploy
[deployTaskForm] There are no forms to deploy
Kindly guide me out of this issue
below is my ant file
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="bpel.deploy" default="AuthorizeCreditRequestApproval" basedir=".">
<property name="process.dir" value="..\SVNCopy\Code}"/>

<xmlproperty file="${process.dir}\AuthorizeCreditAS\bpel\bpel.xml"/>
<property environment="env"/>

<condition property="bpel.home" value="${env.BPEL_HOME}">
<available file="ant-orabpel.xml"/>
</condition>

<property name="bpel.home" value="${oracle.home}/integration/bpel"/>

<property file="build.properties"/>

<import file="ant-orabpel.xml"/>

<property file="ant-orabpel.properties"/>
<target name="AuthorizeCreditRequestApproval" depends="CheckCustomerMarketSegment">
<echo>
| Deploying workflow form for AuthorizeCredit on ${j2ee.hostname}, port ${http.port}
</echo>
<deployTaskForm
platform="${platform}" dir="../SVNCopy/Code/ManageCustomerCreditEligibility/AuthorizeCreditBS/public_html"
domain="${domain}" process= "AuthorizeCreditBS" rev="${rev}"
user="${admin.user}" password="${admin.password}"
hostname="${j2ee.hostname}" cluster="${cluster}"
rmiport="${rmi.port}" opmnrequestport="${opmn.requestport}"
oc4jinstancename="${oc4jinstancename}"
asinstancename="${asinstancename}" verbose="${verbose}"
/>
</target>
<target name="CheckCustomerMarketSegment" depends="compileAuthorizeCredit">
<echo>
| Deploying decision services for AuthorizeCredit on ${j2ee.hostname}, port ${http.port}
</echo>
<deployDecisionServices
platform="${platform}" dir="../SVNCopy/Code/AuthorizeCredit/decisionservices"
domain="${domain}" process="AuthorizeCredit" rev="${rev}"
user="${admin.user}" password="${admin.password}"
hostname="${j2ee.hostname}" httpport="${http.port}"
cluster="${cluster}" rmiport="${rmi.port}"
opmnrequestport="${opmn.requestport}" oc4jinstancename="${oc4jinstancename}"
asinstancename="${asinstancename}" verbose="${verbose}"
/>
</target>
<target name="compileAuthorizeCredit" depends="checkout">
<echo> --- | Compiling bpel process AuthorizeCreditBS| ---
</echo>
<bpelc input="../SVNCopy/Code/AuthorizeCredit/bpel/bpel.xml"
out="../SVNCopy/Code/AuthorizeCredit/output" rev="${rev}"
home="${bpel.home}"/>
<echo> --- | AuthorizeCredit Compiled Successfully, revision ${rev}| ---
</echo>
</target>
</project>
Edited by: Arun Vikram on Mar 4, 2010 10:45 PM

Is there any workflow or decision service in ur bpel???
if present,...the ant is not getting ../SVNCopy/Code/AuthorizeCredit/decisionservices and ../SVNCopy/Code/ManageCustomerCreditEligibility/AuthorizeCreditBS/public_html folders.
Edited by: krish.chaitnya on Mar 4, 2010 11:20 PM

BI Publisher - SuperUser not able to acces Roles and Permission Page

I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly Help

I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly Help

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

HT4623 I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. since the late os upgrace I have not been able to connect w

I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. Since the late os upgrace I have not been able to connect with face time.

Read http://support.apple.com/kb/ts3367

Not able to open pdf and adobe reader on windows xp sp3.

Hello,
I am not able to open pdf and adobe reader on my windows xp sp3 computer. I have reinstalled adobe reader 11.0.3 twice, but, no luck. I would appreciate if you could help me in resolving this issue. Thanks in advance.
Regards,
Venkata

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Finder not able to view folders and files on EHD after updating to OS X 10.9.4

I can see still see 'Hitachi' in the 'Devices' Sidebar, but I am not able to view folders and files on this Hitachi XL2000 2TB FAT32 Hard Drive (EHD) that is USB connected to the iMac below.
Late 2013 Apple iMac (27-inch Display 2560 x 1440), 3.4GHz Quad-core Intel Core i5, Turbo Boost up to 3.8GHz, 8GB 1600MHz DDR3 SDRAM - 2X4GB, 512GB Flash Storage, NVIDIA GeForce GTX 775M 2GB GDDR5, Magic Trackpad, Apple Wireless Keyboard and OS X 10.9.4 Mavericks
All was fine until I updated from OS X 10.9.3 to 10.9.4 earlier this week, so now when I double-click on 'Hitachi' it just loads and loads with nothing happening and never displays the folder and file contents of the EHD.
Also, confirmed that Hitachi EHD has been removed from Spotlight indexing per System Preferences > Privacy > + > Hitachi and it was so this does not seem to be an indexing issue.
I have used OnyX and Apple Disk Utilities unsuccessfully to try and fix this problem.
Interestingly, Backblaze online backup still sees the EHD and connecting this EHD to a Win 8.1 PC also sees the EHD.
Further, I ran the commands below in 'Terminal' to make sure the drive was visible and got the following results which shows that the EHD is not hidden.
iMac:Applications john$ chflags nohidden /Volumes/Hitachi/
iMac:Applications john$ GetFileInfo /Volumes/Hitachi/
directory: "/Volumes/HITACHI"
attributes: avbstclinmedz
modified: 07/10/2014 23:26:44
Finally, I installed XtraFinder and am still not able to see the contents of the EHD, but when I installed OmniDiskSweeper I can navigate the EHD folder tree with no problems and can see the contents of the EHD, but when I try and open up a file it opens Finder which loads and loads and nothing happens.

Apple Support was quite helpful, but in the end I will wait to do a clean install of OS X Yosemite which is due in the Fall and not try and fix OS X 10.9.4 Mavericks.
It turns out that I run backups on my '/Users/john/Library' and the size of this folder before the 10.9.4 update was 1.07 GB and after the update it is 806.9 MB which is baffling, but in the end all of these problems should be resolved with a clean install of OS X Yosemite.
One lesson learned for the future is that I will wait on installing an update until it has been in the wild for awhile as a quick OS X Mavericks Finder Problem search and similar searches show there could be an issue.

Why am I not able to mark "in" and "out" points in Final Cut Pro 6?

I have a bunch of old tapes that I am trying to put on my computer. I have Final Cut Pro 6 and everything hooks up nicely except I am not able to mark in and out points or use capture now. Does anyone out there know why that would be the case?
I appreciate any help I can get.

What VTR? How is it controlled?
What are your capture settings? Firewire Protocol?
x

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

I had this same problem with what's app. There is a new update for the app on the app store which is compatible with ios8. Update the app, or delete it and re-add it. I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.

HT3964 I am not able to reboot my Mac desktop. When I switch on the Mac, I get a white screen with the Apple logo and the little wheel below that goes round and round but the computer refuses to boot.

Hi, I am not able to reboot my Mac desktop.
When I switch on the Mac, I get a white screen with the Apple logo and the little rotating circle.
The system refuses to boot.
What can I do?
Marcus

We need to get you moved. This forum is for mini-tower Macs built between 1998 and 2005 and doesn;t get as much traffic ("eyeballs on the problem") as the forums for newer Macs.
Please do "About this Mac" from you Apple menu and tell us what that says for "processor" and Mac OS version. Looks like this:
or this for later Mac OS versions:
With that we can figure out which of the two iMac forums you need and get the Hosts to move your post.

HT1212 my iphone'"s screen was smashed resulting in not able to unlock passcode and now i can't connect to itunes to synced with my divice before sending in for repair. what can i do

my iphone's screen was smashed resulting in not able to unlock passcode and now i can't connect to itunes to synced with my divice before sending in for repair. what can i do

Sorry, there is nothing you can do.
FYI: Damage like that is not covered by warranty, & all Apple will offer you is an out of warranty replacement...cost, in the US, for an iPhone 4, is US $149.

I am not able to format my ipod classic as it is showing in the widows 7 but not in the itunes and when i try to format it, i am not able to format it

i am not able to format my ipod classic as it is showing in the widows 7 but not in the itunes and when i try to format it, i am not able to format it i am not able to foramt it..

Hello Ephremekka
Start your troubleshooting with the article below to get your iPod Classic to show up in iTunes to be restored.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Regards,
-Norm G.

Gnome panel 3.2 - I am not able to see clock and date well

Hello all,
I am using Gnome in fallback -mode. I upgraded my gnome-panel to version 3.2 and after upgrading I am not able to see date and time information well. This information have shown a dark grey color, which is very difficult to see because background is black. If I put my mouse cursor on the time panel I am able to see infromation because background changes from black to white (timebox get activated). Is there any way to change font/foreground colour from grey to white? It is very irritating put mouse cursor on the date everytime when I want to see time. I tried to downgrade panel back to 3.0 version, but after that I wasn't able to see panel at the all.
-Br, Marko
Last edited by tetrao (2011-10-05 15:27:36)

Looks like I am not a lonely wolf with this problem: https://bugzilla.redhat.com/show_bug.cgi?id=691288
Maybe I just need to wait next version of gnome-panel
Strange here isn't anybody others at this site, who have this issue..
Last edited by tetrao (2011-10-05 15:55:54)

HT1296 Im not able to download movies and music purchased from my iTunes on my iPad iOS 6.1. The download begings to show and once the dowload appears 100% done, I get a message "unable to download". please help

Im not able to download movies and music purchased from my iTunes on my iPad iOS 6.1. The download begings to show and once the dowload appears 100% done, I get a message "unable to download". please help

You have to have an internet connection, either wireless or through a computer with iTunes. When you choose Software Update you can only update to the latest version for your iPod Touch, iOS 6.1.6

Not able to memory dump and create a memory.dmp file in the path: %SystemRoot%\Minidump

Similar Messages

Maybe you are looking for