Not able to merge dimensions objects on webi report based on SAP query
Hello
We are using SAP BI 7.0 , BO XI 3.1 sp1
I have two queries in webi report. These two queries are based on the same universe. I am not able to merge dimensions from both queries as merge dimensions functionality is greyed. Two dimensions are of the same type (char) and are dimensions (not the details).
Does anyone know the reason?
Thanks
Hi,
First check your user ID has rights for merge dimension.may be you can try on other universe and see if it is still grayed out then possible rights issue.
or may be you can check below thread.
http://www.forumtopics.com/busobj/viewtopic.php?p=784845&sid=73804295827b0854dc3a654cf74fda92
Thanks,
Amit
Similar Messages
-
Hi,
We have WebI reports build on BEX using BAPI connectivity. When we are trying to add a object in query panel in a existing report we are getting this ProcessdpCommandEx error. But error does not appear when we add at the end of the list of objects already added.
Can you calrify whether this could be some setting issue or it is a known bug?
Can you share SAP Note No in case it is a known bug?Hi Avijit,
This error occurs in case of any failure in the connectivity. It is like the data providers are not getting processed.
You have mentioned that the issue does not come with newly created reports
Are you creating new reports on migrated universe or a newly created universe?
If issue only comes with migrated universe, please check if the connection has been migrated properly and required middleware and database connectors are in place.
If connections are in place, try importing and exporting the universe once and check.
In case, new report works fine with migrated universe, then you can simply try to re-point the universe by editing the query and can run it again and check.
Regards,
Yuvraj -
BO BI 4.0: WebI report based on BEx query (OLE DB enabled)
Hi Experts
We are trying to create WEBI reports based on BEx queries, but we are experiencing some issues. We have created two BEx queries og two separate multiproviders and opened them for external use but checking the OLE DB enable checkbox. In WebI we are now only able to use on of the queries as a data source (even though both are OLE DB enabled).
Are there any limitations to which multiproviders that can be used to create BEx queries for WebI reports?
We are using BO BI 4.0 and BW 7.0 SP 5.
Kind regards
ErikHi again Henry
We use BW 7.01 Support package 5 (we know it should have been at least 6), SAP GUI 7.20 patch 9, BEx 7.2 patch 6 and BO 4.0 patch 11.
The BW user that is synchronized to BO has almost all rights (almost sap_all). When we log on to BEx directly with the same user we use in BO, we are able to run both BEx queries without any problems. When we then log on to BO (with the same user), we are only able to use on of the queries in WebI.
As you say, we have to following setup:
- BO users are synchronized from our BW system and when they log on to BO they use the SAP authentication.
- The user that is synchronized from BW has been added to the Administrator group in BO
- The OLAP connection is set to SSO so that the authorization in the BW system is used.
It is really strange that we are not able to use on of our multi providers in BW in WebI. As you say, we just need to try debugging with changing the authorization concept, changing the OLAP connection setup and so on to see if that helpsu2026
Kind regards
Erik -
WebI report based on BEx query in Live Office document
Hi
We have a BEx query in BW that has one input ready variable (period). Then we have created a WebI report based on this BEx query (the WebI report itself does not have any prompts). When we run the WebI report we get asked to enter a value in the BEx variable (remember: this is not a WebI prompt). Until this stage everything works fine. Then we have created a Live Office document and added the WebI report. When we refresh the Live Office document, the BEX variable is not shown. The data that is retrieved is from the last time the WebI report run. The refresh option is set to u201COn demand: From the databaseu201D.
Is there a way to get the BEx variables to be shown when refreshing the Live Office document? Remember, we do not use WebI prompts.
We use BW 7.3 and BO BI 4.0.
Kind regards
ErikHi,
Unfortunately, this feature has not been developped the BICS connectiviy. It is only available for manda
tory prompts based on universe. Others have noted the same problem, so there is an enhancement request for the feature to be available using BICS connection in the "Ideas Place".
Use the link to vote for the idea, more votes gives a better chance that this will be picked up for development.
[LifeOffice idea|https://cw.sdn.sap.com/cw/ideas/4094]
Thanks,
Marianne -
How does Merged Dimensions Work in WebI created on SAP BI Queries
Hi,
I need to know how does Merge dimensions work in WebI when using SAP BI Query as source?
Below is my understanding when connection is defined for the universe on oracle database:
1) To get the data in merged dimensions, there must be physical join (Either Direct or vai some other tables) between different tables at backend level (This means there must be join between tables in Oracle database.)
2) we get the UNION of data when dimensions are merged at webI level.
I dont know how this works in SAP BI.
Since there is different data model defined for different BI Queries in SAP , and for each BI Query and there is seperate Universe, So how can you get correct data in WebI when there is no connections in DSO's used in different BI queries?
Can any one suggest me the way data apperas in merged dimensions for WebI created on SAP BI?I assume we are only talking about merging dimensions in Web Intelligence here and not on the BW backend. this is a client side mere where you have 2 resultsets.
if you want to do this on the BI server side it would be a multi-provider combining different InfoProviders - or a InfoSet - depending on the join type you need. MultiProvider is a union, Infoset allows you to choose
Ingo -
Not able to see 0doc_number object
Hi,
I have created sales organization dimension I want to take 0doc_number ( sales document) using info
object direct input but I am not able to see 0doc_number object
Regards,
VivekHi,
Normaly after IOBJ Installation from BI Content you wil not be able to see that in the modeling.
For this follow the steps
1. Goto RSD3 and enter the IOBJ and click on enter.Then you will be able to know active or not.I hope it will exist.
2. Now u want to mainatain that IOBJ in u r catalog.Open u r catlog and maintain u r object.
Regards
Ram. -
Does anyone know why I am not able to see images on some web sites using safari 5.1.7?
I have enabled the apperance tab to display images.Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
-
Not Able to Create database objects(Tables, etc) in Oracle 12c
Hello Sir,
Recently, I have installed oracle 12c in my PC. And I am able to connect with the ANONYMOUS user and connection name ORCL.
But I am not able to create any objects in database like tables creation, it's just showing the error message like- you don't have sufficient privileges.
Could you please help on this? How to start the work on oracle 12c database as I have worked on Oracle 11g with the SCOTT user and connection name ORCL.It was working fine. But SCOTT user is not present in 12c. Is there any other USER in 12c with the default tables like EMP table in 11g in the SCOTT USER schema?
Please suggest, what to do?
Thanks In Advance!!Hi Nishant ,
Thanks for the reply.
I have done all the steps as you mentioned above. I am not able to create HR user. Please check the below errors and
please guide me on this.
SQL*Plus: Release 12.1.0.1.0 Production on Sat Oct 5 23:46:38 2013
Copyright (c) 1982, 2013, Oracle. All rights reserved.
Enter user-name: anonymous
Enter password:
Last Successful login time: Sat Oct 05 2013 23:46:58 +05:30
Connected to: Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
SQL> connect sys as sysdba;
Enter password:
Connected.
SQL> CREATE USER hr IDENTIFIED BY Password#123
2 DEFAULT TABLESPACE hr_users
3 TEMPORARY TABLESPACE hr_temp
4 QUOTA 5000k ON hr_users
5 QUOTA unlimited ON hr_temp
6 PROFILE enduser ;
CREATE USER hr IDENTIFIED BY Password#123
ERROR at line 1:
ORA-65096: invalid common user or role name
SQL> SELECT NAME, CDB FROM V$DATABASE;
NAME CDB
ORCL YES
SQL> SHO CON_ID CON_NAME
CON_ID
1
CON_NAME
CDB$ROOT
SQL> SET LINE 150
SQL> SELECT NAME, OPEN_MODE, OPEN_TIME FROM V$PDBS;
NAME OPEN_MODE OPEN_TIME
PDB$SEED READ ONLY 04-OCT-13 08.57.50.461 PM
PDBORCL MOUNTED
SQL> CONN HR/HR@PDBORCL
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
SQL> SHO CON_ID CON_NAME
SP2-0640: Not connected
SP2-0641: "SHOW CONTAINER" requires connection to server
Thanks in advance!!
Regards,
Dharmendra Verma -
Not able to resize my objects in Nested iview
Dear all,
This is how I created my dashboard.
Model -> iview -> Layers(tabs) -> Each layer has various forms, queries and charts.
Now I have changed it to
Model -> iview -> Layers(tabs) -> Nested iview-> Each Nested iview has various forms, queries and charts.
Can you suggest the best approach in terms of flixibility and performance.
When I introduced a Nested Iview I amd not able to resize my objects ( table, chart, forms etc). I am not sure why. When I go into nested iview and go to Layout tab I see a blank page and can see nothing.
Could anyone help me please.
Also I would appreciate if anyone can suggest me the best practice for creating a dashboard.
Thanks,
KKHi,
Yes you are correct.
to make good Layout for Nestedview contents drilldown to the Nestedview and then go to its layout there you can make the Chages to layout.
Regards,
Govindu -
Adobe Plugin not able to access COM object in Protected mode
We have an adobe plugin for our application. The plugin creates a toolbar button in Adobe and on clicking this button, it invokes one of the form from our application to save the document record for the PDF file in the database. The plugin was working fine till Adobe 9. It stopped working in Adobe X with proctected mode ON. However, if we turn off Protected mdoe, it works fine.
I did some research and found that we need to modify the policy rules by creating ProtectedModeWhitelistConfig.txt file and appropriate registry for it. I did those steps and now I am not getting "Access denied" error when protected mode is ON but the plugin is still not working. On further debug, I found that it fails while trying to connect to SQL Server. It gives error "SSL Security Error". This is working perfectly fine without protected mode. Also It is not able to access COM objects. I guess both these things might be related.
Can anyone let me know what are we missing here?I would recommend that open a formal support case, as working with Protected Mode is quite complex.
-
I am not able to change the object after upgrade(SPAU Activity).
HI All,
I am not able to change the object after upgrade(SPAU Activity). Please any one can tell what is the reason with below details.
You are not authorized to make changes
Message no. 37202
Diagnosis
You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
There is also a second possibility:
You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
System Response
Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
Procedure
Comsult your system administrator.
Thanks in Advance,
Mahesh DevershettyHi,
Does the user who would like to change the screen have the authorisation
for S_DEVELOP in his profile? Please run transaction /NSU53 after the
failed authorisation. You will get an information which authorisation
is missing.
Additional please check if you have open entries in transaction SPAU for
that object.
If you couldn´t solve the issue I need an user to analyse it in your
development system.
That user needs all authorisation for development and has to be
registrated as developer.
The system uses the authorization object S_DEVELOP for Workbench objects
can you please check your user master record whether it contains the
required autorization or not.
Please also ensure that modification adjustment is turned on as per note:
197600 Switching the Modification Assistant off and on
Aidan -
Transport is in modifiable status, But i could not able to delet the object
Hi All,
I have created one development transport and one customizing transport(my colleague), now i want to delete the some objects which contain these change request. But i can not able to delete those objects even though change request is in modifiable status.
How to delete the objects contain in modifiable transport?Hi Arun,
It seems working now
Can add/delete the objects for released transport?
is it possible.
Two more question:
1). I have released one change request, now i want to change the description of the request, how to do that?
2).While executing transports, RDD* (RDDIMPDP) job has canceled in the target system.then what should i do? -
Not able to open Modal Page through a report attribute link
Dear All,
Not able to open Modal Page through a report attribute link, kindly help me...
I am using skill builders modal page plugin ...
Thanks and Regards,
MadonnaHere's what you have to do.
You set up your column link like this:
Link text: whatever you like
Link attributes: onclick="return false;" class="open_modal"
Target: Page in this application
Page: number of the page you want to open in your modal window
You set up your dynamic action like this:
Event: Click
Selection type: jQuery selector
jQuery selector: .open_modal
(notice the dot at the beginning!)
Action: SkillBuilders Modal Page (2.0.0) [Plug-in]
Event Scope: Dynamic
And finally, in your True Action (SkillBuilders Modal Page (2.0.0)), URL Location should be set as Attribute of Triggering Element.
And that's pretty much all it takes.
Hope this helps. -
I am not able to see the valeus in the report on multiprovider.
Hi Gurus,
I have loaded an infoobject Document currency0DOC_CURRCY into DSO and assigned a constant "USD" to it and I am able to see that value in DSO through the display data.
Later I moved the DSO into multiprovider by loading the 0DOC_CURRCY in to multiprovider and wrote a query on it.
But I am not able to see the values for 0DOC_CURRCY in the report.
Why I am not able to see the valeus in the report which is executing on the multiprovider.
PLs help me with a solution.Hi,
First step is to checck the data in the ODS.
Second is, You use Identify Characteristics and Select Key Figures to make InfoObject assignments between MultiProviders and InfoProviders.
If this is checked you 70 % of the job is Over in your creating multiprovider.
For more information
http://help.sap.com/saphelp_sm40/helpdata/en/cf/bc734190ba137de10000000a155106/content.htms
santosh -
Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down
Hello,
We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down
Any pointers how to do it please
Thanks
KrishnaHi,
WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
Regards,
Loic
Maybe you are looking for
-
Using BADI to change the field value in standard transaction ME21N
Hello People, In transaction ME21N to create PO, i have a field where i want to allocate the batch ( CHARG ) NONRETG to all the PO's that are created. I have a BADI for that, however i do i implement the BADI so that the Batch 'NONRETG' is automatic
-
[SOLVED] No network when setting static IP on boot
When I have: eth0="eth0 192.168.1.73 netmask 255.255.255.0 broadcast 192.168.1.255" set in rc.conf at boot, I get no network. I can't even ping machines on the LAN. When I have eth0="dhcp" in rc.conf at boot, the network works fine. What I can't f
-
Error when setting prompt as optional
Hi Gurus of BO. I just have started to get my hands on BO and require some assistance. I have a requirement to create a report with two filters that should prompt user. One of the filters should be obligate (in this example it is region), and the oth
-
Hello all, Hope everyone are doing excellent. I required small information. We are using Exchange 2010(Without SPs) and we have the below setup. 1. Two CAS/HUB(installed on same servers) on which we configured CAS Array. 2. Two MBX servers which are
-
Enlarged screen difficult to navigate, how to change it?
At boot up my screen automatically enlarges itself and I have no idea why. Because the displayed image is larger than the screen, it makes it very difficult to navigate, it scrolls both the entire screen and the window I'm using.