Not able to move files to new folders in Bridge CS6

Hello all.  I am trying to move files around through bridge CS6 but I keep getting :
" The operation cannot be completed because you do not have sufficient permissions".  How do I fix this annoyance? This is really screwing with my work flow and forcing me not to bother using Bridge.
Thanks in advance.

This is really an OS problem as it sets permission levels for operations.   What OS?
If using Win OS and an external drive, you can start Bridge by right clicking and choosing "run as administrator".

Similar Messages

  • I'm not able to move files from my mac to my hard drive, but i can move files from my hard drive to my Mac.  Would really like to make more room on my mac-any suggestions to get these files onto the hard drive?

    When i plug my external hard drive into my mac i'm able to see all the files on it and move files off the hard drive to the mac, but not the other way around.  I need to make more room on my mac and would really like these files to be on this particular external hard drive.  Any help would be great!
    Thank you
    Kris

    Thank you all.  Sounds like i might as well buy a new (mac OS supported) external hard drive.  Not worth the hassle/risk of taking all the old files off my current external HD. 
    Really appreciate all your help!
    Kris

  • I am not able to move files. Adobe 'unexpectedly quit'. Request assistance.

    Adobe 'unexpectedly quit' when I try to move files in my mobile device. This started after Adobe updated.

    Hi,
    Sorry for the inconvinience caused due to move bug. We have fixed the issue and are waiting for apple to review/approve it.
    Thanks for your patience.
    Regards,
    Ankit
    Adobe Reader Team

  • I have  mac book pro. Since i updated to OS 10.8, I have experienced the following: many of the programs don't respond. Not able to transfer file (eg pdf file og movie (VLC)). Many of the processes seem to be less effective or won't respond.

    I have a mac book pro. Since i updated to OS 10.8, I have experienced the following:
    many of the programs don't respond.
    Not able to transfer file (eg pdf file og movie (VLC).
    The tech tool diagnostic software (as part of apple care protection plan) stops in the middle of scanning.

    First, know that if you have any old PPC-only applications they will no longer work. You should uninstall them completely. Secondly, applications that don't work may require upgrades for compatibility with Mountain Lion. Thirdly, you may have a dysfunctional upgrade for which you should try this:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I can not connect my I Pad to a Samsung TV. Does the following make any sense?     Dear Phillip Baker,   Thank you for contacting Samsung Electronics.  We understand that you are not able to movies on the iPad on the TV.   We are sorry to say that you can

    Will the I Pad 2 connectr to a Samsung TV to play a movie from I Tunes.  Samsung sent the following.
     Dear Phillip,
     Thank you for contacting Samsung Electronics.
    We understand that you are not able to movies on the iPad on the TV. We are sorry to say that you can connect devices which are DLNA compatible and PC or laptops which are
    installed with PC Share manager. If the iPad supports DLNA, you can connec it to the TV and play the files
    supported by the TV. The TV supports following file video types : MKV, AVI, MP4, WMV, MPEG, MPG, ASF, 3GP, TS, TP, TRP. If you have any other questions, please feel free to contact us.
    Thank you. 
    Samsung Online Support.
    Any help?

    What method of connection are you trying to use? DLNA looks like a standard for sharing media between devices over your home network, but I'm fairly certain the iPad doesn't support this protocol. Apple sell adaptors to connect your iPad directly to TV using composite or HDMI connectors. I'd be surpsied if your TV won't support either of those.
    tt2

  • I am not able to attach files (picture) to my e-mail.

    I am not able to attach files (pictures) to my e mails. My picture folders are located on my desktop. I normally click on the icon for attachments, and choose the picture I want to send. Now it just shows sending and it doesn't send. A pop up will show displaying technical problem.

    I'm having the same problem with FF19.02 using Yahoo mail. Just as of 4/4/2013 we have not been able to attatch any type of a file. Don't want to go back to IE9 where it is working. C'mon FF. You're wise enogh and should be able to solve this problem ASAP. No one wants to go backwards to IEx.x. We need you

  • Error - 2048 not a valid movie file

    hello,
    I'm a NAPP member and had been following the photoshop TV casts on QT....however, now I get the error message 'error - 2048 not a valid movie file'...its an mpeg4 QT file, but I get the message whenever I attempt to play the downloaded file...or when I try to just watch the stream, it won't open the URL...these are the only movies that I'm having this problem with...as I can watch other movies from other sites w/o incident...NAPP hasn't replied to my inquiries except that they don't support the TV shows.
    Any ideas?...would be appreciated...
    Thanks...
    G5 - dual 1.8 ghz - 2ghz ram   Mac OS X (10.3.7)   Dell Inspiron Core Duo notebook w/ XP home

    T S
    Thank you very much for the link to videolan.org. I was having the same problem playing downloaded Photoshop TV videos. I tried MPlayer which worked but was not comprehensible. I had never heard of videolan, but it works like a charm.
    Thanks again.
    17 PowerBook, 1.33 Ghz   Mac OS X (10.4.6)   2 GB Ram, iWeb 1.1.1

  • Sender File Adapter  not able to get file via FTP from an external system

    Hi,
    I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml".  The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
    The connect mode is Permanently and the transfer mode is Binary.
    Can you help me?
    Thanks.
    T.

    Hi Teresa,
    does this case appears with a file size higher the others?
    Personally, I do not recommend to have a polling under 1min.
    10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
    If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
    regards.
    mickael

  • TS1702 i am using iphone 2G, i have updated IOS 3.1.3, but i am not able to use whatsapp. the newer version of whatsapp is not working in my phone. please give me the solution.

    i am using iphone 2G, i have updated IOS 3.1.3, but i am not able to use whatsapp. the newer version of whatsapp is not working in my phone. please give me the solution.

    As newer iPhones and iOS versions are made, apps start to drop support for the older versions of the iOS. It looks like you have fallen victim to this. I commend you for sticking with the original iPhone until now, but it looks like it's time for an upgrade if you want to use apps that have dropped support.
    Also the new iPhone provides hundreds of new features and spec upgrades from the original. Check it out! http://www.apple.com/iphone/

  • QuickTime Player7 can't open "video.3gp".  The file may be damaged or may not be a movie file that is compatible with QuickTime Player.  How can i do to open movie file? on OS X 10.10.2

    i just tried to open video file on youtube. but it shown "can't open "video.3gp".  The file may be damaged or may not be a movie file that is compatible with QuickTime Player.   How can i solve this issue?

    i just tried to open video file on youtube. but it shown "can't open "video.3gp".  The file may be damaged or may not be a movie file that is compatible with QuickTime Player.   How can i solve this issue?
    In what file type and compression format did you download the YouTube content? I.e., to avoid such issues, you would normally download the source files as content that is natively compatible with your target player or convert incompatible file type/compression format combinations to files that are compatible with your targeted media player.

  • Not able to send files to my Mac via bluetooth.

    Hey i have mac os x 10.5, i am not able to sen files to my mac from my blackberry 8520. I have paired my bb and mac but when i try to send files from my bb it says "Failed to find service".
    Please help.
    Thanks.

    Hi
    go to system preference
    and go to sharing
    enable blue tooth sharing
    Hope it helps
    LH

  • I am not able to move my IPhoto pics to the cloud.  Do I have to convert all IPhoto albums to Moble Galleries first?

    I am not able to move my IPhoto pics to the cloud.  Do I have to convert all IPhoto albums to Moble Galleries first?

    Also, when I add things to my desktop they are no longer showing up on my actual desktop. However, they are in the folder for my desktop on Finder. I'm not sure if these problems are related in any way.

  • Have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

    have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

    Flip4Mac plays Windows Media content, not AVI content. The codec needed to play those specific AVI files is most likely part of Perian or VLC but may not exist for Mac OS X.
    (97189)

  • HT200290 I am not able to move an app to another screen

    I am not able to move an app to another screen even though there is room left on that screen. I can move the app around on its own screen but cannot move it to another screen.

    I asked the question because that procedure didn't work. Apple support told me to move the apps using iTunes with my iPhone connected to the desktop. That worked. Support didn't know why the "normal" procedure which you described wasn't working, but it wasn't and isn't.
    Before calling Apple support I tried shutting down the iPhone and restarting, but that didn't help. It's not really a problem any more because the apps can be moved around in iTunes on the desktop.

  • Not able to attach files other than photos/videos on iPad Safari/Chrome

    Not able to attach files other than photos/videos on iPad Safari/Chrome

    You cannot attach them in a mail.
    But, you can do this.
    1. Go to the document.
    2. Tap on share button.
    3. There should be an option "Mail"
    4. Tap on it and attach.
    Note:
    1. If you are checking your mail in browswer - this does not work.
    2. You cannot attach it to the mail you are currently composing.

Maybe you are looking for

  • ORA-12032: cannot use rowid column

    Hi, on 8.1.7 I have the following error : ORA-12032: cannot use rowid column from materialized view log on "string"."string" The solution is : Action: A complete refresh is required before the next fast refresh. Add ROWID columns to the materialized

  • How create URL for see my folio on the web content viewer ?

    Hello, I try to create URL for see my folio on the web content viewer but nothing Work i have this informations : my applicationName my accountID my publication Name and my articleName (even if for this i'm not sure) All my articles are free, my foli

  • Clear error logs

    Is there a way to clear the error logs on the collection server so that i can start with a fresh count? Right now I have thousands of errors listed, and I don't really want to have to scroll through all the ones from last year, etc. But I can't find

  • Mail size exceeds problem

    Hi, I have written abap program to send a mail to outlook by using the FM SO_DOCUMENT_SEND_API1 in my program. As per client requirement,  i have to display the results in the body of the message like tabular format. and i have used html tags in my a

  • Field Calculation

    Hi Experts, My report needs to involve fields from data source for calculation, how to do that? What's the syntax? Thanks.