Not able to OBIEE11gAnalytics after AdminSe is converted as windows service

Hi all,
I recentry intalled obiee1g. All is working fine. However, I followed
http://gerardnico.com/wiki/dat/obiee/windows_service_11g to obiee11g Admin service as windows service. I made it successfully.
My service name: My service name: beasvc bifoundation_domain_AdminServer
I am able to start this service via windows service. However I am not able to connect to Analytics or any other service after this service is created. I am not sure what is going on.
Can you please help me?
Thank you
Raja

Hi Krishna,
   Once you install NW04S,you can login using j2ee_admin user,but as you said that you are getting Authentication error.You can Activate Emergency user to login.
Follow this link  <a href="http://help.sap.com/saphelp_nw04/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/content.htm">Activating Emergency User</a>
Let me know if you have any issues further
Please Assign points if Helpful
Regards
Rani A

Similar Messages

  • HT204368 I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?

    NovaRiddle wrote:
    I am having trouble pairing my iPhone4 with bluetooth device. ...
    Depends on the device...
    Have a look here for Supported Bluetooth Profiles
    http://support.apple.com/kb/HT3647

  • Not able to activate after updating to ios6.1 on iphone 4s

    not able to activate after updating to ios6.1 on iphone 4s , it says servers temp unavailable....

    Hey JYTF1975,
    That is never a good time when you are getting error messages when you are trying to restore. If you are getting a bunch of variations of error 0xE and on windows, take a look at the article below for some troubleshooting options to get it back up so you can use your iPhone. 
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    https://support.apple.com/en-us/ts3221
    Take care,
    -Norm G. 

  • Not showing company list after installing B1 2007 on windows 2003 standard

    Hi gurus,
    I am facing a problem regarding B1.System not showing  company list after installing B1 2007 on windows 2003 standard edition.
    Plz help me.
    Thanks in advance
    Regds
    Maddy

    Hi Maddy,
    Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
    Vasu Natari.

  • I am not able to transfer emails from outlook 2007 in Windows 8 to outlook 2011 in Mac.  I export .pst file to my hard drive from win 8 and then import in outlook 11 in mac, the folders including subfolders are created but there are hardly one email

    i am not able to transfer emails from outlook 2007 in Windows 8 to outlook 2011 in Mac.  I export .pst file to my hard drive from win 8 and then import in outlook 11 in mac, the folders including subfolders are created but there are hardly one email.  Please help

    Post your question in the MS Mac forums since it's their software you're having issues with:
    http://answers.microsoft.com/en-us/mac

  • Not able to add PDF or JPEG file on the Service contract

    Hi All,
    Not able to add PDF or JPEG file on the Service=>Service contract=>Attachment TAB
    The error message getting displayed "This entry already exists in the following tables "(ATC1) (ODBC - 2035) [Message 131 - 183] "
    Could anybody help me to sort out this issue.
    Thanks,
    Vishwanath

    Hi,
    Would you please run the above query at your side
    select * from atc1
    where absentry not in (select absentry from oatc)
    and in case you get any results, please log a message for SAP support on Service market place
    Regards
    Vikas
    SAP Business One Forums Team
    Edited by: Vikas Rastogi on Jan 13, 2009 9:52 PM

  • Not able to navigate to the URL in new window

    I am trying to navigate to the URL form the OAF page through simple button and it should open in new window.In 11i it was working fine bu using setDestination(url) and setTargetFrame("_blank") properties but in R12 setTargetFrame property is not working so I am not able to open the url framed in new window.It is opening in the same window.In R12 I am trying with javascript with the following code but it is not working there.Could you please help it is urgent?
    xxExtRef.setDestination("javascript:window.open(url);");
    where url variable holds the URL which is framed at run time i.e. url is different for diffrent customers
    Any pointers would be of great help.
    Thanks in advance.

    Hi ,
    Instead of button you can go for Link and hardcode the url (eg : http://www.yahoo.com ) and set the target frame as _b using declarative implementation from Jdeveloper .
    it will open the URL in a new window .
    Keerthi

  • Not able to login after configuring SSH.Please reply

    i have configured AAA on Cisco aeronet 1400 series wireless bridge (AIR-BR1410A-A-K9).After configuring i am not able to login to the device via telnet and via putty.Soon after enabling SSH i am not able to login even through SSH.The below are the commands i have configured on the device.I used to configure the same commands on my Cisco Switches also.
    Layer -2
    ip domain-name NETS
    crypto key generate rsa general-keys modulus 1024
    ip ssh version 2
    aaa new-model
    aaa authentication login Login-LAN group tacacs+ line
    aaa authentication enable default group tacacs+ enable
    aaa accounting exec EXEC-LAN-L2 start-stop group tacacs+
    aaa accounting commands 1 Level-1-LAN-L2 start-stop group tacacs+
    aaa accounting commands 15 Level-15-LAN-L2 start-stop group tacacs+
    tacacs-server host 10.254.0.140 key !n01#zh3r3@|2
    line vty 0 4
    accounting commands 1 Level-1-LAN-L2
    accounting commands 15 Level-15-LAN-L2
    accounting exec EXEC-LAN-L2
    login authentication Login-LAN
    transport input ssh

    Hi,
    Check out the connectivity between cisco aeronet and TACAS server and what is the failed logs says in tacas server.
    If possible try to change the configuration to aaa authentication login Login-LAN(default) group tacacs+ line and then try what exactly happens.
    Hope that helps
    Regards
    Ganesh.H

  • Not able to render After Effects comp in Premiere CC Pro using Dynamic Link

    I've noticed that I'm not able to completely render a After Effects comp inside a Premiere CC sequence. The render bar goes about half way and stays there. I found I have to quit After Effects for the render in Premiere to complete. Is this normal?
    I'm running Mavricks on the new Mac Pro.

    It's not normal on Windows.

  • Not Able To Install After Effects Cs6 Trial

    I am currently using a macbook pro 13 inch with mountain lion software at version 10.8.2
    I am not able to install the after effects cs6 trial
    I tried to turn off my proxies and vpn, but it still does not work
    I also tried to restart my computer and tried to install it again but still nothing happens
    the error problems i clicked onto
    Exit Code: 15 -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 0 error(s), 0 warning(s)  -------------------------------------------------------------------------------------
    System Requirements
    I was able to install the trial on my imac with the same account, it opened normally
    How come my macbook pro could not install it

    Exit code 15 installing
    And not to point out the obvious: a 13" MBP may not meet the system requirements due to the limited screen resolution.
    Mylenium

  • Not able to sync after updation

    After i updated the softwere to IOS 5.0 version im not able to sync the phone so far, more than 20 attemps so far over 6 months of time.
    i could not update it until i deleted all video and songs from phone,
    after that so far not able to sync or load any files to handset.
    it start syncing and gets struck at backingup up "STEP 2 OF 7".
    tried updating itunes to latest one and also IOS to 5.0.1 thought handset,
    Its one scrap set now with only contacts, apps and photos.
    Anybody to help?
    - [email protected]

    Just spent over an hour debugging my wife's audible problems as well. iPhone updates, iTunes updates, reboot, pull hair out etc...
    What I've determined is the "Sync Manager" window - when you select what to sync to you iPod/iPhone device that you've selected in the left hand window - does not appear to work for Audio Books.
    We we're choosing Sync Audiobooks -> Selected audiobooks and NOTHING we selected was getting synced. More importantly, and this took a long time to see, none of the selected items were reflected in the little checkboxes in her iTunes library view.
    Once I MANUALLY selected the books in the iTunes library view, things started syncing.
    So it appears the audio books you select to sync when setting up your phone, do not get registered properly as "things to sync".
    Definitely looks like an iTunes bug to me. Until they fix it, try manually checking the books you want to sync in your library view.
    What a wonderful way to spend Saturday night.

  • My mac is not able to boot after internet recovery

    Hi I Own an i mac27 inch which i bought in year 2011. Recently it showed some disc errors and got crashed with a blue screen. I was not able to boot it in a safe mode and had to remove my data via a thunderbolt cable. After removing the data i formatted the hard drive with mac format thinking that would remove the bad sectors. But I realized it wont even start up again in a recovery mode. So i tried to boot it via a bootable USB drive. Now When i press Command+R i get only two options (1. Bootable OSX Drive, 2.Internet connection) None of the options are of any help. Any suggestions??

    Hello nachi777,
    Thanks for using Apple Support Communities.
    From your post it looks like you are trying to reformat your hard drive, but are unable to boot into recovery.  Since you have a newer iMac, you should be able to boot to internet recovery.  Booting to internet recovery occurs automatically if your startup drive has an issue.  If you are seeing boot drive options when starting up, then you may just be holding down the option key on the keyboard.  Both options you do see to boot from, should be able to help in reformatting your hard drive.
    OS X: About OS X Recovery - Apple Support
    Take care,
    Alex H.

  • I PAD RETINA DISPLAY NOT ABLE TO BROWSE AFTER UPDATING TO IOS 8.0.2

    i am  facing the problem in my i pad retina display after updating to ios 8.0.2
    I pad is not able to check for updates even. plz help.

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • I am not able to run after I've installed MF3.6. Now it will not let me uninstall the program.

    Time Warner told me that because I was running 3 browsers I had a "conflict". I had Mozilla, Google Chrome, and Internet Explorer8. We had a poweroutage on cable: both tv and computer (Time Warner's problem). When power came back I could not open my Mozilla Firefox, the other browsers were working. This problem began approximately on Jan 28, 2011. I had the older version of Firefox on Jan. 28th. I was not able to uninstall this from my computer without the help from the tech at Time Warner. We then installed the newer version 3.6. Removed Google Chrome. Again I could not get 3.6 to open. Time Warner told me to contact the manufacturer because "something was afecting my registry".
    I contacted ZT, through the Safe Mode we uninstalled 3.6 and installed 3.6. Again, it does not open . I tried to uninstall the progam again and the same message appears: that it is in the process of uninstalling or changing, but it does not start the process of uninstalling. ZT told me to contact Mozilla Firefox.
    I have been using Mozilla Firefox for years and would like to continue-
    please help me,

    Make sure you take package structure into account.
    If you have say
    package testing.things;
    public class Test
        public static void main(String[] args)
            System.out.println("World Hello");
    }in file Test.java, you compile it with (assuming your current working directory is at the folder in which the source file is located).
    javac -d . Test.javaand run it with
    java testing.things.TestThe -d . option creates the output at the current directory (with a folder structure matching your package structure).
    #

  • Not able to connect after changing the password using ALTER VALUES clause

    Hi,
    Just now John explained about VALUES clause in below thread.
    Expired Status
    I created a new account called SURI and tried to use the user account HR's password using VALUES clause. I was able to alter the password but not able to connect SURI with hr password.
    Please see the version details below. And the SQL statements which I have tried.
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 13 18:44:50 2012
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Enter user-name: sys as sysdba
    Enter password:
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL> SELECT password
      2  FROM dba_users
      3  WHERE username = 'HR';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> ALTER USER SURI IDENTIFIED BY VALUES '4C6D73C3E8B0F0DA';
    User altered.
    SQL> SELECT password
      2  FROM dba_users
      3  WHERE username='SURI';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> conn suri/hr     -- HR account's password is hr only
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Warning: You are no longer connected to ORACLE.
    SQL>Thanks,
    Suri

    Suri wrote:
    Hi,
    Just now John explained about VALUES clause in below thread.
    Expired Status
    I created a new account called SURI and tried to use the user account HR's password using VALUES clause. I was able to alter the password but not able to connect SURI with hr password.
    Please see the version details below. And the SQL statements which I have tried.
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 13 18:44:50 2012
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Enter user-name: sys as sysdba
    Enter password:
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL> SELECT password
    2  FROM dba_users
    3  WHERE username = 'HR';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> ALTER USER SURI IDENTIFIED BY VALUES '4C6D73C3E8B0F0DA';
    User altered.
    SQL> SELECT password
    2  FROM dba_users
    3  WHERE username='SURI';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> conn suri/hr     -- HR account's password is hr only
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Warning: You are no longer connected to ORACLE.
    SQL>Thanks,
    SuriYou can only do it for the same user, as the password is a hashed value that includes the username as part of the hashing (It's either the username or some internal object id or something). So using the hashed value against another user won't work.

Maybe you are looking for